diff options
Diffstat (limited to 'lib/usbhost/USB_Host_Shield_2.0/Usb.cpp')
| -rw-r--r-- | lib/usbhost/USB_Host_Shield_2.0/Usb.cpp | 812 |
1 files changed, 812 insertions, 0 deletions
diff --git a/lib/usbhost/USB_Host_Shield_2.0/Usb.cpp b/lib/usbhost/USB_Host_Shield_2.0/Usb.cpp new file mode 100644 index 0000000000..14272588a1 --- /dev/null +++ b/lib/usbhost/USB_Host_Shield_2.0/Usb.cpp @@ -0,0 +1,812 @@ +/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved. + +This software may be distributed and modified under the terms of the GNU +General Public License version 2 (GPL2) as published by the Free Software +Foundation and appearing in the file GPL2.TXT included in the packaging of +this file. Please note that GPL2 Section 2[b] requires that all works based +on this software must also be made publicly available under the terms of +the GPL2 ("Copyleft"). + +Contact information +------------------- + +Circuits At Home, LTD +Web : http://www.circuitsathome.com +e-mail : support@circuitsathome.com + */ +/* USB functions */ + +#include "Usb.h" + +static uint8_t usb_error = 0; +static uint8_t usb_task_state; + +/* constructor */ +USB::USB() : bmHubPre(0) { + usb_task_state = USB_DETACHED_SUBSTATE_INITIALIZE; //set up state machine + init(); +} + +/* Initialize data structures */ +void USB::init() { + //devConfigIndex = 0; + bmHubPre = 0; +} + +uint8_t USB::getUsbTaskState(void) { + return ( usb_task_state); +} + +void USB::setUsbTaskState(uint8_t state) { + usb_task_state = state; +} + +EpInfo* USB::getEpInfoEntry(uint8_t addr, uint8_t ep) { + UsbDevice *p = addrPool.GetUsbDevicePtr(addr); + + if(!p || !p->epinfo) + return NULL; + + EpInfo *pep = p->epinfo; + + for(uint8_t i = 0; i < p->epcount; i++) { + if((pep)->epAddr == ep) + return pep; + + pep++; + } + return NULL; +} + +/* set device table entry */ + +/* each device is different and has different number of endpoints. This function plugs endpoint record structure, defined in application, to devtable */ +uint8_t USB::setEpInfoEntry(uint8_t addr, uint8_t epcount, EpInfo* eprecord_ptr) { + if(!eprecord_ptr) + return USB_ERROR_INVALID_ARGUMENT; + + UsbDevice *p = addrPool.GetUsbDevicePtr(addr); + + if(!p) + return USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL; + + p->address.devAddress = addr; + p->epinfo = eprecord_ptr; + p->epcount = epcount; + + return 0; +} + +uint8_t USB::SetAddress(uint8_t addr, uint8_t ep, EpInfo **ppep, uint16_t *nak_limit) { + UsbDevice *p = addrPool.GetUsbDevicePtr(addr); + + if(!p) + return USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL; + + if(!p->epinfo) + return USB_ERROR_EPINFO_IS_NULL; + + *ppep = getEpInfoEntry(addr, ep); + + if(!*ppep) + return USB_ERROR_EP_NOT_FOUND_IN_TBL; + + *nak_limit = (0x0001UL << (((*ppep)->bmNakPower > USB_NAK_MAX_POWER) ? USB_NAK_MAX_POWER : (*ppep)->bmNakPower)); + (*nak_limit)--; + /* + USBTRACE2("\r\nAddress: ", addr); + USBTRACE2(" EP: ", ep); + USBTRACE2(" NAK Power: ",(*ppep)->bmNakPower); + USBTRACE2(" NAK Limit: ", nak_limit); + USBTRACE("\r\n"); + */ + regWr(rPERADDR, addr); //set peripheral address + + uint8_t mode = regRd(rMODE); + + //Serial.print("\r\nMode: "); + //Serial.println( mode, HEX); + //Serial.print("\r\nLS: "); + //Serial.println(p->lowspeed, HEX); + + + + // Set bmLOWSPEED and bmHUBPRE in case of low-speed device, reset them otherwise + regWr(rMODE, (p->lowspeed) ? mode | bmLOWSPEED | bmHubPre : mode & ~(bmHUBPRE | bmLOWSPEED)); + + return 0; +} + +/* Control transfer. Sets address, endpoint, fills control packet with necessary data, dispatches control packet, and initiates bulk IN transfer, */ +/* depending on request. Actual requests are defined as inlines */ +/* return codes: */ +/* 00 = success */ + +/* 01-0f = non-zero HRSLT */ +uint8_t USB::ctrlReq(uint8_t addr, uint8_t ep, uint8_t bmReqType, uint8_t bRequest, uint8_t wValLo, uint8_t wValHi, + uint16_t wInd, uint16_t total, uint16_t nbytes, uint8_t* dataptr, USBReadParser *p) { + bool direction = false; //request direction, IN or OUT + uint8_t rcode; + SETUP_PKT setup_pkt; + + EpInfo *pep = NULL; + uint16_t nak_limit = 0; + + rcode = SetAddress(addr, ep, &pep, &nak_limit); + + if(rcode) + return rcode; + + direction = ((bmReqType & 0x80) > 0); + + /* fill in setup packet */ + setup_pkt.ReqType_u.bmRequestType = bmReqType; + setup_pkt.bRequest = bRequest; + setup_pkt.wVal_u.wValueLo = wValLo; + setup_pkt.wVal_u.wValueHi = wValHi; + setup_pkt.wIndex = wInd; + setup_pkt.wLength = total; + + bytesWr(rSUDFIFO, 8, (uint8_t*) & setup_pkt); //transfer to setup packet FIFO + + rcode = dispatchPkt(tokSETUP, ep, nak_limit); //dispatch packet + + if(rcode) //return HRSLT if not zero + return ( rcode); + + if(dataptr != NULL) //data stage, if present + { + if(direction) //IN transfer + { + uint16_t left = total; + + pep->bmRcvToggle = 1; //bmRCVTOG1; + + while(left) { + // Bytes read into buffer + uint16_t read = nbytes; + //uint16_t read = (left<nbytes) ? left : nbytes; + + rcode = InTransfer(pep, nak_limit, &read, dataptr); + if(rcode == hrTOGERR) { + // yes, we flip it wrong here so that next time it is actually correct! + pep->bmRcvToggle = (regRd(rHRSL) & bmSNDTOGRD) ? 0 : 1; + continue; + } + + if(rcode) + return rcode; + + // Invoke callback function if inTransfer completed successfully and callback function pointer is specified + if(!rcode && p) + ((USBReadParser*)p)->Parse(read, dataptr, total - left); + + left -= read; + + if(read < nbytes) + break; + } + } else //OUT transfer + { + pep->bmSndToggle = 1; //bmSNDTOG1; + rcode = OutTransfer(pep, nak_limit, nbytes, dataptr); + } + if(rcode) //return error + return ( rcode); + } + // Status stage + return dispatchPkt((direction) ? tokOUTHS : tokINHS, ep, nak_limit); //GET if direction +} + +/* IN transfer to arbitrary endpoint. Assumes PERADDR is set. Handles multiple packets if necessary. Transfers 'nbytes' bytes. */ +/* Keep sending INs and writes data to memory area pointed by 'data' */ + +/* rcode 0 if no errors. rcode 01-0f is relayed from dispatchPkt(). Rcode f0 means RCVDAVIRQ error, + fe USB xfer timeout */ +uint8_t USB::inTransfer(uint8_t addr, uint8_t ep, uint16_t *nbytesptr, uint8_t* data) { + EpInfo *pep = NULL; + uint16_t nak_limit = 0; + + uint8_t rcode = SetAddress(addr, ep, &pep, &nak_limit); + + if(rcode) { + USBTRACE3("(USB::InTransfer) SetAddress Failed ", rcode, 0x81); + USBTRACE3("(USB::InTransfer) addr requested ", addr, 0x81); + USBTRACE3("(USB::InTransfer) ep requested ", ep, 0x81); + return rcode; + } + return InTransfer(pep, nak_limit, nbytesptr, data); +} + +uint8_t USB::InTransfer(EpInfo *pep, uint16_t nak_limit, uint16_t *nbytesptr, uint8_t* data) { + uint8_t rcode = 0; + uint8_t pktsize; + + uint16_t nbytes = *nbytesptr; + //printf("Requesting %i bytes ", nbytes); + uint8_t maxpktsize = pep->maxPktSize; + + *nbytesptr = 0; + regWr(rHCTL, (pep->bmRcvToggle) ? bmRCVTOG1 : bmRCVTOG0); //set toggle value + + // use a 'break' to exit this loop + while(1) { + rcode = dispatchPkt(tokIN, pep->epAddr, nak_limit); //IN packet to EP-'endpoint'. Function takes care of NAKS. + if(rcode == hrTOGERR) { + // yes, we flip it wrong here so that next time it is actually correct! + pep->bmRcvToggle = (regRd(rHRSL) & bmRCVTOGRD) ? 0 : 1; + regWr(rHCTL, (pep->bmRcvToggle) ? bmRCVTOG1 : bmRCVTOG0); //set toggle value + continue; + } + if(rcode) { + //printf(">>>>>>>> Problem! dispatchPkt %2.2x\r\n", rcode); + break; //should be 0, indicating ACK. Else return error code. + } + /* check for RCVDAVIRQ and generate error if not present */ + /* the only case when absence of RCVDAVIRQ makes sense is when toggle error occurred. Need to add handling for that */ + if((regRd(rHIRQ) & bmRCVDAVIRQ) == 0) { + //printf(">>>>>>>> Problem! NO RCVDAVIRQ!\r\n"); + rcode = 0xf0; //receive error + break; + } + pktsize = regRd(rRCVBC); //number of received bytes + //printf("Got %i bytes \r\n", pktsize); + // This would be OK, but... + //assert(pktsize <= nbytes); + if(pktsize > nbytes) { + // This can happen. Use of assert on Arduino locks up the Arduino. + // So I will trim the value, and hope for the best. + //printf(">>>>>>>> Problem! Wanted %i bytes but got %i.\r\n", nbytes, pktsize); + pktsize = nbytes; + } + + int16_t mem_left = (int16_t)nbytes - *((int16_t*)nbytesptr); + + if(mem_left < 0) + mem_left = 0; + + data = bytesRd(rRCVFIFO, ((pktsize > mem_left) ? mem_left : pktsize), data); + + regWr(rHIRQ, bmRCVDAVIRQ); // Clear the IRQ & free the buffer + *nbytesptr += pktsize; // add this packet's byte count to total transfer length + + /* The transfer is complete under two conditions: */ + /* 1. The device sent a short packet (L.T. maxPacketSize) */ + /* 2. 'nbytes' have been transferred. */ + if((pktsize < maxpktsize) || (*nbytesptr >= nbytes)) // have we transferred 'nbytes' bytes? + { + // Save toggle value + pep->bmRcvToggle = ((regRd(rHRSL) & bmRCVTOGRD)) ? 1 : 0; + //printf("\r\n"); + rcode = 0; + break; + } // if + } //while( 1 ) + return ( rcode); +} + +/* OUT transfer to arbitrary endpoint. Handles multiple packets if necessary. Transfers 'nbytes' bytes. */ +/* Handles NAK bug per Maxim Application Note 4000 for single buffer transfer */ + +/* rcode 0 if no errors. rcode 01-0f is relayed from HRSL */ +uint8_t USB::outTransfer(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t* data) { + EpInfo *pep = NULL; + uint16_t nak_limit = 0; + + uint8_t rcode = SetAddress(addr, ep, &pep, &nak_limit); + + if(rcode) + return rcode; + + return OutTransfer(pep, nak_limit, nbytes, data); +} + +uint8_t USB::OutTransfer(EpInfo *pep, uint16_t nak_limit, uint16_t nbytes, uint8_t *data) { + uint8_t rcode = hrSUCCESS, retry_count; + uint8_t *data_p = data; //local copy of the data pointer + uint16_t bytes_tosend, nak_count; + uint16_t bytes_left = nbytes; + + uint8_t maxpktsize = pep->maxPktSize; + + if(maxpktsize < 1 || maxpktsize > 64) + return USB_ERROR_INVALID_MAX_PKT_SIZE; + + unsigned long timeout = millis() + USB_XFER_TIMEOUT; + + regWr(rHCTL, (pep->bmSndToggle) ? bmSNDTOG1 : bmSNDTOG0); //set toggle value + + while(bytes_left) { + retry_count = 0; + nak_count = 0; + bytes_tosend = (bytes_left >= maxpktsize) ? maxpktsize : bytes_left; + bytesWr(rSNDFIFO, bytes_tosend, data_p); //filling output FIFO + regWr(rSNDBC, bytes_tosend); //set number of bytes + regWr(rHXFR, (tokOUT | pep->epAddr)); //dispatch packet + while(!(regRd(rHIRQ) & bmHXFRDNIRQ)); //wait for the completion IRQ + regWr(rHIRQ, bmHXFRDNIRQ); //clear IRQ + rcode = (regRd(rHRSL) & 0x0f); + + while(rcode && ((long)(millis() - timeout) < 0L)) { + switch(rcode) { + case hrNAK: + nak_count++; + if(nak_limit && (nak_count == nak_limit)) + goto breakout; + //return ( rcode); + break; + case hrTIMEOUT: + retry_count++; + if(retry_count == USB_RETRY_LIMIT) + goto breakout; + //return ( rcode); + break; + case hrTOGERR: + // yes, we flip it wrong here so that next time it is actually correct! + pep->bmSndToggle = (regRd(rHRSL) & bmSNDTOGRD) ? 0 : 1; + regWr(rHCTL, (pep->bmSndToggle) ? bmSNDTOG1 : bmSNDTOG0); //set toggle value + break; + default: + goto breakout; + }//switch( rcode + + /* process NAK according to Host out NAK bug */ + regWr(rSNDBC, 0); + regWr(rSNDFIFO, *data_p); + regWr(rSNDBC, bytes_tosend); + regWr(rHXFR, (tokOUT | pep->epAddr)); //dispatch packet + while(!(regRd(rHIRQ) & bmHXFRDNIRQ)); //wait for the completion IRQ + regWr(rHIRQ, bmHXFRDNIRQ); //clear IRQ + rcode = (regRd(rHRSL) & 0x0f); + }//while( rcode && .... + bytes_left -= bytes_tosend; + data_p += bytes_tosend; + }//while( bytes_left... +breakout: + + pep->bmSndToggle = (regRd(rHRSL) & bmSNDTOGRD) ? 1 : 0; //bmSNDTOG1 : bmSNDTOG0; //update toggle + return ( rcode); //should be 0 in all cases +} +/* dispatch USB packet. Assumes peripheral address is set and relevant buffer is loaded/empty */ +/* If NAK, tries to re-send up to nak_limit times */ +/* If nak_limit == 0, do not count NAKs, exit after timeout */ +/* If bus timeout, re-sends up to USB_RETRY_LIMIT times */ + +/* return codes 0x00-0x0f are HRSLT( 0x00 being success ), 0xff means timeout */ +uint8_t USB::dispatchPkt(uint8_t token, uint8_t ep, uint16_t nak_limit) { + unsigned long timeout = millis() + USB_XFER_TIMEOUT; + uint8_t tmpdata; + uint8_t rcode = hrSUCCESS; + uint8_t retry_count = 0; + uint16_t nak_count = 0; + + while((long)(millis() - timeout) < 0L) { + regWr(rHXFR, (token | ep)); //launch the transfer + rcode = USB_ERROR_TRANSFER_TIMEOUT; + + while((long)(millis() - timeout) < 0L) //wait for transfer completion + { + tmpdata = regRd(rHIRQ); + + if(tmpdata & bmHXFRDNIRQ) { + regWr(rHIRQ, bmHXFRDNIRQ); //clear the interrupt + rcode = 0x00; + break; + }//if( tmpdata & bmHXFRDNIRQ + + }//while ( millis() < timeout + + //if (rcode != 0x00) //exit if timeout + // return ( rcode); + + rcode = (regRd(rHRSL) & 0x0f); //analyze transfer result + + switch(rcode) { + case hrNAK: + nak_count++; + if(nak_limit && (nak_count == nak_limit)) + return (rcode); + break; + case hrTIMEOUT: + retry_count++; + if(retry_count == USB_RETRY_LIMIT) + return (rcode); + break; + default: + return (rcode); + }//switch( rcode + + }//while( timeout > millis() + return ( rcode); +} + +/* USB main task. Performs enumeration/cleanup */ +void USB::Task(void) //USB state machine +{ + uint8_t rcode; + uint8_t tmpdata; + static unsigned long delay = 0; + //USB_DEVICE_DESCRIPTOR buf; + bool lowspeed = false; + + MAX3421E::Task(); + + tmpdata = getVbusState(); + + /* modify USB task state if Vbus changed */ + switch(tmpdata) { + case SE1: //illegal state + usb_task_state = USB_DETACHED_SUBSTATE_ILLEGAL; + lowspeed = false; + break; + case SE0: //disconnected + if((usb_task_state & USB_STATE_MASK) != USB_STATE_DETACHED) + usb_task_state = USB_DETACHED_SUBSTATE_INITIALIZE; + lowspeed = false; + break; + case LSHOST: + + lowspeed = true; + //intentional fallthrough + case FSHOST: //attached + if((usb_task_state & USB_STATE_MASK) == USB_STATE_DETACHED) { + delay = millis() + USB_SETTLE_DELAY; + usb_task_state = USB_ATTACHED_SUBSTATE_SETTLE; + } + break; + }// switch( tmpdata + + for(uint8_t i = 0; i < USB_NUMDEVICES; i++) + if(devConfig[i]) + rcode = devConfig[i]->Poll(); + + switch(usb_task_state) { + case USB_DETACHED_SUBSTATE_INITIALIZE: + init(); + + for(uint8_t i = 0; i < USB_NUMDEVICES; i++) + if(devConfig[i]) + rcode = devConfig[i]->Release(); + + usb_task_state = USB_DETACHED_SUBSTATE_WAIT_FOR_DEVICE; + break; + case USB_DETACHED_SUBSTATE_WAIT_FOR_DEVICE: //just sit here + break; + case USB_DETACHED_SUBSTATE_ILLEGAL: //just sit here + break; + case USB_ATTACHED_SUBSTATE_SETTLE: //settle time for just attached device + if((long)(millis() - delay) >= 0L) + usb_task_state = USB_ATTACHED_SUBSTATE_RESET_DEVICE; + else break; // don't fall through + case USB_ATTACHED_SUBSTATE_RESET_DEVICE: + regWr(rHCTL, bmBUSRST); //issue bus reset + usb_task_state = USB_ATTACHED_SUBSTATE_WAIT_RESET_COMPLETE; + break; + case USB_ATTACHED_SUBSTATE_WAIT_RESET_COMPLETE: + if((regRd(rHCTL) & bmBUSRST) == 0) { + tmpdata = regRd(rMODE) | bmSOFKAENAB; //start SOF generation + regWr(rMODE, tmpdata); + usb_task_state = USB_ATTACHED_SUBSTATE_WAIT_SOF; + //delay = millis() + 20; //20ms wait after reset per USB spec + } + break; + case USB_ATTACHED_SUBSTATE_WAIT_SOF: //todo: change check order + if(regRd(rHIRQ) & bmFRAMEIRQ) { + //when first SOF received _and_ 20ms has passed we can continue + /* + if (delay < millis()) //20ms passed + usb_task_state = USB_STATE_CONFIGURING; + */ + usb_task_state = USB_ATTACHED_SUBSTATE_WAIT_RESET; + delay = millis() + 20; + } + break; + case USB_ATTACHED_SUBSTATE_WAIT_RESET: + if((long)(millis() - delay) >= 0L) usb_task_state = USB_STATE_CONFIGURING; + else break; // don't fall through + case USB_STATE_CONFIGURING: + + //Serial.print("\r\nConf.LS: "); + //Serial.println(lowspeed, HEX); + + rcode = Configuring(0, 0, lowspeed); + + if(rcode) { + if(rcode != USB_DEV_CONFIG_ERROR_DEVICE_INIT_INCOMPLETE) { + usb_error = rcode; + usb_task_state = USB_STATE_ERROR; + } + } else + usb_task_state = USB_STATE_RUNNING; + break; + case USB_STATE_RUNNING: + break; + case USB_STATE_ERROR: + //MAX3421E::Init(); + break; + } // switch( usb_task_state ) +} + +uint8_t USB::DefaultAddressing(uint8_t parent, uint8_t port, bool lowspeed) { + //uint8_t buf[12]; + uint8_t rcode; + UsbDevice *p0 = NULL, *p = NULL; + + // Get pointer to pseudo device with address 0 assigned + p0 = addrPool.GetUsbDevicePtr(0); + + if(!p0) + return USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL; + + if(!p0->epinfo) + return USB_ERROR_EPINFO_IS_NULL; + + p0->lowspeed = (lowspeed) ? true : false; + + // Allocate new address according to device class + uint8_t bAddress = addrPool.AllocAddress(parent, false, port); + + if(!bAddress) + return USB_ERROR_OUT_OF_ADDRESS_SPACE_IN_POOL; + + p = addrPool.GetUsbDevicePtr(bAddress); + + if(!p) + return USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL; + + p->lowspeed = lowspeed; + + // Assign new address to the device + rcode = setAddr(0, 0, bAddress); + + if(rcode) { + addrPool.FreeAddress(bAddress); + bAddress = 0; + return rcode; + } + return 0; +}; + +uint8_t USB::AttemptConfig(uint8_t driver, uint8_t parent, uint8_t port, bool lowspeed) { + //printf("AttemptConfig: parent = %i, port = %i\r\n", parent, port); + uint8_t retries = 0; + +again: + uint8_t rcode = devConfig[driver]->ConfigureDevice(parent, port, lowspeed); + if(rcode == USB_ERROR_CONFIG_REQUIRES_ADDITIONAL_RESET) { + if(parent == 0) { + // Send a bus reset on the root interface. + regWr(rHCTL, bmBUSRST); //issue bus reset + delay(102); // delay 102ms, compensate for clock inaccuracy. + } else { + // reset parent port + devConfig[parent]->ResetHubPort(port); + } + } else if(rcode == hrJERR && retries < 3) { // Some devices returns this when plugged in - trying to initialize the device again usually works + delay(100); + retries++; + goto again; + } else if(rcode) + return rcode; + + rcode = devConfig[driver]->Init(parent, port, lowspeed); + if(rcode == hrJERR && retries < 3) { // Some devices returns this when plugged in - trying to initialize the device again usually works + delay(100); + retries++; + goto again; + } + if(rcode) { + // Issue a bus reset, because the device may be in a limbo state + if(parent == 0) { + // Send a bus reset on the root interface. + regWr(rHCTL, bmBUSRST); //issue bus reset + delay(102); // delay 102ms, compensate for clock inaccuracy. + } else { + // reset parent port + devConfig[parent]->ResetHubPort(port); + } + } + return rcode; +} + +/* + * This is broken. We need to enumerate differently. + * It causes major problems with several devices if detected in an unexpected order. + * + * + * Oleg - I wouldn't do anything before the newly connected device is considered sane. + * i.e.(delays are not indicated for brevity): + * 1. reset + * 2. GetDevDescr(); + * 3a. If ACK, continue with allocating address, addressing, etc. + * 3b. Else reset again, count resets, stop at some number (5?). + * 4. When max.number of resets is reached, toggle power/fail + * If desired, this could be modified by performing two resets with GetDevDescr() in the middle - however, from my experience, if a device answers to GDD() + * it doesn't need to be reset again + * New steps proposal: + * 1: get address pool instance. exit on fail + * 2: pUsb->getDevDescr(0, 0, constBufSize, (uint8_t*)buf). exit on fail. + * 3: bus reset, 100ms delay + * 4: set address + * 5: pUsb->setEpInfoEntry(bAddress, 1, epInfo), exit on fail + * 6: while (configurations) { + * for(each configuration) { + * for (each driver) { + * 6a: Ask device if it likes configuration. Returns 0 on OK. + * If successful, the driver configured device. + * The driver now owns the endpoints, and takes over managing them. + * The following will need codes: + * Everything went well, instance consumed, exit with success. + * Instance already in use, ignore it, try next driver. + * Not a supported device, ignore it, try next driver. + * Not a supported configuration for this device, ignore it, try next driver. + * Could not configure device, fatal, exit with fail. + * } + * } + * } + * 7: for(each driver) { + * 7a: Ask device if it knows this VID/PID. Acts exactly like 6a, but using VID/PID + * 8: if we get here, no driver likes the device plugged in, so exit failure. + * + */ +uint8_t USB::Configuring(uint8_t parent, uint8_t port, bool lowspeed) { + //uint8_t bAddress = 0; + //printf("Configuring: parent = %i, port = %i\r\n", parent, port); + uint8_t devConfigIndex; + uint8_t rcode = 0; + uint8_t buf[sizeof (USB_DEVICE_DESCRIPTOR)]; + USB_DEVICE_DESCRIPTOR *udd = reinterpret_cast<USB_DEVICE_DESCRIPTOR *>(buf); + UsbDevice *p = NULL; + EpInfo *oldep_ptr = NULL; + EpInfo epInfo; + + epInfo.epAddr = 0; + epInfo.maxPktSize = 8; + epInfo.epAttribs = 0; + epInfo.bmNakPower = USB_NAK_MAX_POWER; + + //delay(2000); + AddressPool &addrPool = GetAddressPool(); + // Get pointer to pseudo device with address 0 assigned + p = addrPool.GetUsbDevicePtr(0); + if(!p) { + //printf("Configuring error: USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL\r\n"); + return USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL; + } + + // Save old pointer to EP_RECORD of address 0 + oldep_ptr = p->epinfo; + + // Temporary assign new pointer to epInfo to p->epinfo in order to + // avoid toggle inconsistence + + p->epinfo = &epInfo; + + p->lowspeed = lowspeed; + // Get device descriptor + rcode = getDevDescr(0, 0, sizeof (USB_DEVICE_DESCRIPTOR), (uint8_t*)buf); + + // Restore p->epinfo + p->epinfo = oldep_ptr; + + if(rcode) { + //printf("Configuring error: Can't get USB_DEVICE_DESCRIPTOR\r\n"); + return rcode; + } + + // to-do? + // Allocate new address according to device class + //bAddress = addrPool.AllocAddress(parent, false, port); + + uint16_t vid = udd->idVendor; + uint16_t pid = udd->idProduct; + uint8_t klass = udd->bDeviceClass; + uint8_t subklass = udd->bDeviceSubClass; + // Attempt to configure if VID/PID or device class matches with a driver + // Qualify with subclass too. + // + // VID/PID & class tests default to false for drivers not yet ported + // subclass defaults to true, so you don't have to define it if you don't have to. + // + for(devConfigIndex = 0; devConfigIndex < USB_NUMDEVICES; devConfigIndex++) { + if(!devConfig[devConfigIndex]) continue; // no driver + if(devConfig[devConfigIndex]->GetAddress()) continue; // consumed + if(devConfig[devConfigIndex]->DEVSUBCLASSOK(subklass) && (devConfig[devConfigIndex]->VIDPIDOK(vid, pid) || devConfig[devConfigIndex]->DEVCLASSOK(klass))) { + rcode = AttemptConfig(devConfigIndex, parent, port, lowspeed); + if(rcode != USB_DEV_CONFIG_ERROR_DEVICE_NOT_SUPPORTED) + break; + } + } + + if(devConfigIndex < USB_NUMDEVICES) { + return rcode; + } + + + // blindly attempt to configure + for(devConfigIndex = 0; devConfigIndex < USB_NUMDEVICES; devConfigIndex++) { + if(!devConfig[devConfigIndex]) continue; + if(devConfig[devConfigIndex]->GetAddress()) continue; // consumed + if(devConfig[devConfigIndex]->DEVSUBCLASSOK(subklass) && (devConfig[devConfigIndex]->VIDPIDOK(vid, pid) || devConfig[devConfigIndex]->DEVCLASSOK(klass))) continue; // If this is true it means it must have returned USB_DEV_CONFIG_ERROR_DEVICE_NOT_SUPPORTED above + rcode = AttemptConfig(devConfigIndex, parent, port, lowspeed); + + //printf("ERROR ENUMERATING %2.2x\r\n", rcode); + if(!(rcode == USB_DEV_CONFIG_ERROR_DEVICE_NOT_SUPPORTED || rcode == USB_ERROR_CLASS_INSTANCE_ALREADY_IN_USE)) { + // in case of an error dev_index should be reset to 0 + // in order to start from the very beginning the + // next time the program gets here + //if (rcode != USB_DEV_CONFIG_ERROR_DEVICE_INIT_INCOMPLETE) + // devConfigIndex = 0; + return rcode; + } + } + // if we get here that means that the device class is not supported by any of registered classes + rcode = DefaultAddressing(parent, port, lowspeed); + + return rcode; +} + +uint8_t USB::ReleaseDevice(uint8_t addr) { + if(!addr) + return 0; + + for(uint8_t i = 0; i < USB_NUMDEVICES; i++) { + if(!devConfig[i]) continue; + if(devConfig[i]->GetAddress() == addr) + return devConfig[i]->Release(); + } + return 0; +} + +#if 1 //!defined(USB_METHODS_INLINE) +//get device descriptor + +uint8_t USB::getDevDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t* dataptr) { + return ( ctrlReq(addr, ep, bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, 0x00, USB_DESCRIPTOR_DEVICE, 0x0000, nbytes, nbytes, dataptr, NULL)); +} +//get configuration descriptor + +uint8_t USB::getConfDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t conf, uint8_t* dataptr) { + return ( ctrlReq(addr, ep, bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, conf, USB_DESCRIPTOR_CONFIGURATION, 0x0000, nbytes, nbytes, dataptr, NULL)); +} + +/* Requests Configuration Descriptor. Sends two Get Conf Descr requests. The first one gets the total length of all descriptors, then the second one requests this + total length. The length of the first request can be shorter ( 4 bytes ), however, there are devices which won't work unless this length is set to 9 */ +uint8_t USB::getConfDescr(uint8_t addr, uint8_t ep, uint8_t conf, USBReadParser *p) { + const uint8_t bufSize = 64; + uint8_t buf[bufSize]; + USB_CONFIGURATION_DESCRIPTOR *ucd = reinterpret_cast<USB_CONFIGURATION_DESCRIPTOR *>(buf); + + uint8_t ret = getConfDescr(addr, ep, 9, conf, buf); + + if(ret) + return ret; + + uint16_t total = ucd->wTotalLength; + + //USBTRACE2("\r\ntotal conf.size:", total); + + return ( ctrlReq(addr, ep, bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, conf, USB_DESCRIPTOR_CONFIGURATION, 0x0000, total, bufSize, buf, p)); +} + +//get string descriptor + +uint8_t USB::getStrDescr(uint8_t addr, uint8_t ep, uint16_t ns, uint8_t index, uint16_t langid, uint8_t* dataptr) { + return ( ctrlReq(addr, ep, bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, index, USB_DESCRIPTOR_STRING, langid, ns, ns, dataptr, NULL)); +} +//set address + +uint8_t USB::setAddr(uint8_t oldaddr, uint8_t ep, uint8_t newaddr) { + uint8_t rcode = ctrlReq(oldaddr, ep, bmREQ_SET, USB_REQUEST_SET_ADDRESS, newaddr, 0x00, 0x0000, 0x0000, 0x0000, NULL, NULL); + //delay(2); //per USB 2.0 sect.9.2.6.3 + delay(300); // Older spec says you should wait at least 200ms + return rcode; + //return ( ctrlReq(oldaddr, ep, bmREQ_SET, USB_REQUEST_SET_ADDRESS, newaddr, 0x00, 0x0000, 0x0000, 0x0000, NULL, NULL)); +} +//set configuration + +uint8_t USB::setConf(uint8_t addr, uint8_t ep, uint8_t conf_value) { + return ( ctrlReq(addr, ep, bmREQ_SET, USB_REQUEST_SET_CONFIGURATION, conf_value, 0x00, 0x0000, 0x0000, 0x0000, NULL, NULL)); +} + +#endif // defined(USB_METHODS_INLINE) |