1 files changed, 106 insertions, 0 deletions
diff --git a/lib/lufa/LUFA/CodeTemplates/DeviceTemplate/DeviceApplication.c b/lib/lufa/LUFA/CodeTemplates/DeviceTemplate/DeviceApplication.c
new file mode 100644
index 0000000000..2bc44b492c
--- /dev/null
+++ b/lib/lufa/LUFA/CodeTemplates/DeviceTemplate/DeviceApplication.c
@@ -0,0 +1,106 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the USB device application. This file contains the
+ *  main tasks of the application and is responsible for the initial
+ *  application hardware configuration.
+ */
+
+#include "DeviceApplication.h"
+
+/** Main program entry point. This routine contains the overall program flow, including initial
+ *  setup of all components and the main program loop.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	GlobalInterruptEnable();
+
+	for (;;)
+	{
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+	#if (ARCH == ARCH_AVR8)
+		/* Disable watchdog if enabled by bootloader/fuses */
+		MCUSR &= ~(1 << WDRF);
+		wdt_disable();
+
+		/* Disable clock division */
+		clock_prescale_set(clock_div_1);
+
+		/* Hardware Initialization */
+		USB_Init(USB_MODE_Device, USB_DEVICE_OPT_FULLSPEED | USB_OPT_AUTO_PLL);
+	#elif (ARCH == ARCH_XMEGA)
+		/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
+		XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
+		XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
+
+		/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
+		XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
+		XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
+
+		PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
+
+		/* Hardware Initialization */
+		USB_Init(USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH);
+	#endif
+}
+
+/** Event handler for the library USB Connection event. */
+void EVENT_USB_Device_Connect(void)
+{
+
+}
+
+/** Event handler for the library USB Disconnection event. */
+void EVENT_USB_Device_Disconnect(void)
+{
+
+}
+
+/** Event handler for the library USB Configuration Changed event. */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+
+}
+
+/** Event handler for the library USB Control Request reception event. */
+void EVENT_USB_Device_ControlRequest(void)
+{
+
+}