diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/adc_driver.md | 4 | ||||
| -rw-r--r-- | docs/compatible_microcontrollers.md | 1 | ||||
| -rw-r--r-- | docs/feature_backlight.md | 2 | ||||
| -rw-r--r-- | docs/spi_driver.md | 2 |
4 files changed, 5 insertions, 4 deletions
diff --git a/docs/adc_driver.md b/docs/adc_driver.md index 7c4e05efc4..f8fb94094e 100644 --- a/docs/adc_driver.md +++ b/docs/adc_driver.md @@ -22,7 +22,7 @@ Then place this include at the top of your code: ### AVR -|Channel|AT90USB64/128|ATmega16/32U4|ATmega32A|ATmega328P| +|Channel|AT90USB64/128|ATmega16/32U4|ATmega32A|ATmega328/P| |-------|-------------|-------------|---------|----------| |0 |`F0` |`F0` |`A0` |`C0` | |1 |`F1` |`F1` |`A1` |`C1` | @@ -39,7 +39,7 @@ Then place this include at the top of your code: |12 | |`B5` | | | |13 | |`B6` | | | -<sup>\* The ATmega328P possesses two extra ADC channels; however, they are not present on the DIP pinout, and are not shared with GPIO pins. You can use `adc_read()` directly to gain access to these.</sup> +<sup>\* The ATmega328/P possesses two extra ADC channels; however, they are not present on the DIP pinout, and are not shared with GPIO pins. You can use `adc_read()` directly to gain access to these.</sup> ### ARM diff --git a/docs/compatible_microcontrollers.md b/docs/compatible_microcontrollers.md index 85dd440d37..ac90ed7464 100644 --- a/docs/compatible_microcontrollers.md +++ b/docs/compatible_microcontrollers.md @@ -14,6 +14,7 @@ Certain MCUs which do not have native USB will use [V-USB](https://www.obdev.at/ * [ATmega32A](https://www.microchip.com/wwwproducts/en/ATmega32A) * [ATmega328P](https://www.microchip.com/wwwproducts/en/ATmega328P) +* [ATmega328](https://www.microchip.com/wwwproducts/en/ATmega328) ## ARM diff --git a/docs/feature_backlight.md b/docs/feature_backlight.md index 5f69468c34..7e4401b40f 100644 --- a/docs/feature_backlight.md +++ b/docs/feature_backlight.md @@ -89,7 +89,7 @@ BACKLIGHT_DRIVER = pwm Hardware PWM is supported according to the following table: -|Backlight Pin|AT90USB64/128|ATmega16/32U4|ATmega16/32U2|ATmega32A|ATmega328P| +|Backlight Pin|AT90USB64/128|ATmega16/32U4|ATmega16/32U2|ATmega32A|ATmega328/P| |-------------|-------------|-------------|-------------|---------|----------| |`B1` | | | | |Timer 1 | |`B2` | | | | |Timer 1 | diff --git a/docs/spi_driver.md b/docs/spi_driver.md index c170bf1dfc..1d432432ad 100644 --- a/docs/spi_driver.md +++ b/docs/spi_driver.md @@ -11,7 +11,7 @@ No special setup is required - just connect the `SS`, `SCK`, `MOSI` and `MISO` p |ATMega16/32U2/4|`B0`|`B1` |`B2` |`B3` | |AT90USB64/128 |`B0`|`B1` |`B2` |`B3` | |ATmega32A |`B4`|`B7` |`B5` |`B6` | -|ATmega328P |`B2`|`B5` |`B3` |`B4` | +|ATmega328/P |`B2`|`B5` |`B3` |`B4` | You may use more than one slave select pin, not just the `SS` pin. This is useful when you have multiple devices connected and need to communicate with them individually. `SPI_SS_PIN` can be passed to `spi_start()` to refer to `SS`. |