diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/feature_eeprom.md | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/docs/feature_eeprom.md b/docs/feature_eeprom.md index 3a4119eab7..088f4f36ff 100644 --- a/docs/feature_eeprom.md +++ b/docs/feature_eeprom.md @@ -40,7 +40,7 @@ void keyboard_post_init_user(void) { // Set default layer, if enabled if (user_config.rgb_layer_change) { rgblight_enable_noeeprom(); - rgblight_sethsv_noeeprom_cyan(); + rgblight_sethsv_noeeprom(HSV_CYAN); rgblight_mode_noeeprom(1); } } @@ -51,19 +51,19 @@ The above function will use the EEPROM config immediately after reading it, to s layer_state_t layer_state_set_user(layer_state_t state) { switch (get_highest_layer(state)) { case _RAISE: - if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom_magenta(); rgblight_mode_noeeprom(1); } + if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom(HSV_MAGENTA); rgblight_mode_noeeprom(1); } break; case _LOWER: - if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom_red(); rgblight_mode_noeeprom(1); } + if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom(HSV_RED); rgblight_mode_noeeprom(1); } break; case _PLOVER: - if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom_green(); rgblight_mode_noeeprom(1); } + if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom(HSV_GREEN); rgblight_mode_noeeprom(1); } break; case _ADJUST: - if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom_white(); rgblight_mode_noeeprom(1); } + if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom(HSV_WHITE); rgblight_mode_noeeprom(1); } break; default: // for any other layers, or the default layer - if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom_cyan(); rgblight_mode_noeeprom(1); } + if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom(HSV_CYAN); rgblight_mode_noeeprom(1); } break; } return state; @@ -119,7 +119,7 @@ void eeconfig_init_user(void) { // EEPROM is getting reset! // use the non noeeprom versions, to write these values to EEPROM too rgblight_enable(); // Enable RGB by default - rgblight_sethsv_cyan(); // Set it to CYAN by default + rgblight_sethsv(HSV_CYAN); // Set it to CYAN by default rgblight_mode(1); // set to solid by default } ``` |