diff options
101 files changed, 474 insertions, 2802 deletions
diff --git a/keyboards/ares/ares.c b/keyboards/ares/ares.c index 07276491c5..e6379cb18d 100644 --- a/keyboards/ares/ares.c +++ b/keyboards/ares/ares.c @@ -17,27 +17,19 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "ares.h" -#ifdef BACKLIGHT_ENABLE -void backlight_init_ports(void) { - setPinOutput(D0); - setPinOutput(D1); - setPinOutput(D4); - setPinOutput(D6); +void keyboard_pre_init_kb(void) { + led_init_ports(); + keyboard_pre_init_user(); } -void backlight_set(uint8_t level) { - if (level == 0) { - // Turn out the lights - writePinLow(D0); - writePinLow(D1); - writePinLow(D4); - writePinLow(D6); - } else { - // Turn on the lights - writePinHigh(D0); - writePinHigh(D1); - writePinHigh(D4); - writePinHigh(D6); - } +void led_init_ports(void) { + setPinOutput(D1); + writePinHigh(D1); +} + +bool led_update_kb(led_t led_state) { + if (led_update_user(led_state)) { + writePin(D1, !led_state.caps_lock); + } + return true; } -#endif diff --git a/keyboards/ares/config.h b/keyboards/ares/config.h index f0aa926ea5..c50587db9c 100644 --- a/keyboards/ares/config.h +++ b/keyboards/ares/config.h @@ -37,7 +37,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DIODE_DIRECTION COL2ROW #define DEBOUNCE 5 -#define BACKLIGHT_LEVELS 1 +#define BACKLIGHT_PIN D4 +#define BACKLIGHT_LEVELS 3 #define RGBLIGHT_ANIMATIONS #define NO_UART 1 diff --git a/keyboards/ares/rules.mk b/keyboards/ares/rules.mk index 58d36bc673..f540741721 100644 --- a/keyboards/ares/rules.mk +++ b/keyboards/ares/rules.mk @@ -17,7 +17,7 @@ MOUSEKEY_ENABLE = no EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = yes COMMAND_ENABLE = yes -BACKLIGHT_ENABLE = no +BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = no WS2812_DRIVER = i2c diff --git a/keyboards/bfake/bfake.c b/keyboards/bfake/bfake.c index 9039fe5465..eb328ba833 100644 --- a/keyboards/bfake/bfake.c +++ b/keyboards/bfake/bfake.c @@ -17,30 +17,19 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "bfake.h" -void backlight_init_ports(void) { - setPinOutput(D0); - setPinOutput(D1); - setPinOutput(D4); - setPinOutput(D6); +void keyboard_pre_init_kb(void) { + led_init_ports(); + keyboard_pre_init_user(); +} - writePinLow(D0); - writePinLow(D1); - writePinLow(D4); - writePinLow(D6); +void led_init_ports(void) { + setPinOutput(D1); + writePinHigh(D1); } -void backlight_set(uint8_t level) { - if (level == 0) { - // Turn out the lights - writePinLow(D0); - writePinLow(D1); - writePinLow(D4); - writePinLow(D6); - } else { - // Turn on the lights - writePinHigh(D0); - writePinHigh(D1); - writePinHigh(D4); - writePinHigh(D6); - } +bool led_update_kb(led_t led_state) { + if (led_update_user(led_state)) { + writePin(D1, !led_state.caps_lock); + } + return true; } diff --git a/keyboards/bfake/config.h b/keyboards/bfake/config.h index 65f1f3a759..7c814ccc93 100644 --- a/keyboards/bfake/config.h +++ b/keyboards/bfake/config.h @@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifndef BFAKE_CONFIG_H -#define BFAKE_CONFIG_H +#pragma once #include "config_common.h" @@ -38,9 +37,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DIODE_DIRECTION COL2ROW #define DEBOUNCE 5 -#define BACKLIGHT_LEVELS 1 +#define BACKLIGHT_PIN D4 +#define BACKLIGHT_LEVELS 3 #define RGBLIGHT_ANIMATIONS #define NO_UART 1 - -#endif diff --git a/keyboards/bfake/rules.mk b/keyboards/bfake/rules.mk index 107bb4fa90..ab6af983ce 100644 --- a/keyboards/bfake/rules.mk +++ b/keyboards/bfake/rules.mk @@ -17,7 +17,7 @@ MOUSEKEY_ENABLE = yes EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = yes COMMAND_ENABLE = yes -BACKLIGHT_ENABLE = no +BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = no WS2812_DRIVER = i2c diff --git a/keyboards/donutcables/budget96/budget96.c b/keyboards/donutcables/budget96/budget96.c index e9125a3e60..7317e24e26 100644 --- a/keyboards/donutcables/budget96/budget96.c +++ b/keyboards/donutcables/budget96/budget96.c @@ -16,32 +16,22 @@ #include "budget96.h" -void backlight_init_ports(void) { - // initialize pins D0, D1, D4 and D6 as output +void keyboard_pre_init_kb(void) { + led_init_ports(); + keyboard_pre_init_user(); +} + +void led_init_ports(void) { setPinOutput(D0); setPinOutput(D1); - setPinOutput(D4); - setPinOutput(D6); - - // turn backlight LEDs on writePinHigh(D0); writePinHigh(D1); - writePinHigh(D4); - writePinHigh(D6); } -void backlight_set(uint8_t level) { - if (level == 0) { - // turn backlight LEDs off - writePinLow(D0); - writePinLow(D1); - writePinLow(D4); - writePinLow(D6); - } else { - // turn backlight LEDs on - writePinHigh(D0); - writePinHigh(D1); - writePinHigh(D4); - writePinHigh(D6); +bool led_update_kb(led_t led_state) { + if (led_update_user(led_state)) { + writePin(D0, !led_state.num_lock); + writePin(D1, !led_state.caps_lock); } + return true; } diff --git a/keyboards/donutcables/budget96/config.h b/keyboards/donutcables/budget96/config.h index 127e542f1c..dddc8075b1 100644 --- a/keyboards/donutcables/budget96/config.h +++ b/keyboards/donutcables/budget96/config.h @@ -37,5 +37,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DIODE_DIRECTION COL2ROW #define DEBOUNCE 5 -#define BACKLIGHT_LEVELS 1 +#define BACKLIGHT_PIN D4 +#define BACKLIGHT_LEVELS 3 #define RGBLIGHT_ANIMATIONS diff --git a/keyboards/donutcables/budget96/rules.mk b/keyboards/donutcables/budget96/rules.mk index 54328d248d..84eace5ed6 100644 --- a/keyboards/donutcables/budget96/rules.mk +++ b/keyboards/donutcables/budget96/rules.mk @@ -15,7 +15,7 @@ BOOTLOADER = bootloadHID BOOTMAGIC_ENABLE = no MOUSEKEY_ENABLE = yes EXTRAKEY_ENABLE = yes -CONSOLE_ENABLE = yes +CONSOLE_ENABLE = no COMMAND_ENABLE = yes BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = yes diff --git a/keyboards/eve/meteor/config.h b/keyboards/eve/meteor/config.h index b23bc877fe..2100c3a458 100644 --- a/keyboards/eve/meteor/config.h +++ b/keyboards/eve/meteor/config.h @@ -36,4 +36,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DIODE_DIRECTION COL2ROW #define DEBOUNCE 5 -#define BACKLIGHT_LEVELS 1 +#define BACKLIGHT_PIN D4 +#define BACKLIGHT_LEVELS 3 diff --git a/keyboards/eve/meteor/meteor.c b/keyboards/eve/meteor/meteor.c index f5ecbad025..ac1ca5d643 100644 --- a/keyboards/eve/meteor/meteor.c +++ b/keyboards/eve/meteor/meteor.c @@ -16,32 +16,19 @@ #include "meteor.h" -void backlight_init_ports(void) { - // initialize pins D0, D1, D4 and D6 as output - setPinOutput(D0); - setPinOutput(D1); - setPinOutput(D4); - setPinOutput(D6); +void keyboard_pre_init_kb(void) { + led_init_ports(); + keyboard_pre_init_user(); +} - // turn backlight LEDs on - writePinHigh(D0); +void led_init_ports(void) { + setPinOutput(D1); writePinHigh(D1); - writePinHigh(D4); - writePinHigh(D6); } -void backlight_set(uint8_t level) { - if (level == 0) { - // turn backlight LEDs off - writePinLow(D0); - writePinLow(D1); - writePinLow(D4); - writePinLow(D6); - } else { - // turn backlight LEDs on - writePinHigh(D0); - writePinHigh(D1); - writePinHigh(D4); - writePinHigh(D6); +bool led_update_kb(led_t led_state) { + if (led_update_user(led_state)) { + writePin(D1, !led_state.caps_lock); } + return true; } diff --git a/keyboards/exclusive/e6v2/le_bmc/config.h b/keyboards/exclusive/e6v2/le_bmc/config.h index d0b976c1ec..ca680f5029 100644 --- a/keyboards/exclusive/e6v2/le_bmc/config.h +++ b/keyboards/exclusive/e6v2/le_bmc/config.h @@ -45,5 +45,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, C2, C3, C4, C5, D7 } #define DIODE_DIRECTION COL2ROW +#define BACKLIGHT_PIN D4 +#define BACKLIGHT_LEVELS 3 + #define RGBLED_NUM 6 #define RGBLIGHT_ANIMATIONS diff --git a/keyboards/exclusive/e6v2/le_bmc/le_bmc.c b/keyboards/exclusive/e6v2/le_bmc/le_bmc.c index e3b81c81ba..b09e588795 100644 --- a/keyboards/exclusive/e6v2/le_bmc/le_bmc.c +++ b/keyboards/exclusive/e6v2/le_bmc/le_bmc.c @@ -16,32 +16,19 @@ #include "le_bmc.h" -void backlight_init_ports(void) { - // initialize pins D0, D1, D4 and D6 as output - setPinOutput(D0); - setPinOutput(D1); - setPinOutput(D4); - setPinOutput(D6); +void keyboard_pre_init_kb(void) { + led_init_ports(); + keyboard_pre_init_user(); +} - // turn backlight LEDs on - writePinHigh(D0); +void led_init_ports(void) { + setPinOutput(D1); writePinHigh(D1); - writePinHigh(D4); - writePinHigh(D6); } -void backlight_set(uint8_t level) { - if (level == 0) { - // turn backlight LEDs off - writePinLow(D0); - writePinLow(D1); - writePinLow(D4); - writePinLow(D6); - } else { - // turn backlight LEDs on - writePinHigh(D0); - writePinHigh(D1); - writePinHigh(D4); - writePinHigh(D6); +bool led_update_kb(led_t led_state) { + if (led_update_user(led_state)) { + writePin(D1, !led_state.caps_lock); } + return true; } diff --git a/keyboards/exclusive/e6v2/le_bmc/rules.mk b/keyboards/exclusive/e6v2/le_bmc/rules.mk index 106044ba72..ded651d3d8 100644 --- a/keyboards/exclusive/e6v2/le_bmc/rules.mk +++ b/keyboards/exclusive/e6v2/le_bmc/rules.mk @@ -17,13 +17,13 @@ BOOTLOADER = bootloadHID BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) MOUSEKEY_ENABLE = yes # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) +CONSOLE_ENABLE = no # Console for debug(+400) COMMAND_ENABLE = yes # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default WS2812_DRIVER = i2c RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) diff --git a/keyboards/exclusive/e6v2/oe_bmc/config.h b/keyboards/exclusive/e6v2/oe_bmc/config.h index fc7c91ca66..a6b56ba003 100644 --- a/keyboards/exclusive/e6v2/oe_bmc/config.h +++ b/keyboards/exclusive/e6v2/oe_bmc/config.h @@ -45,5 +45,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, C2, C3, C4, C5, D7 } #define DIODE_DIRECTION COL2ROW +#define BACKLIGHT_PIN D4 +#define BACKLIGHT_LEVELS 3 + #define RGBLED_NUM 6 #define RGBLIGHT_ANIMATIONS diff --git a/keyboards/exclusive/e6v2/oe_bmc/oe_bmc.c b/keyboards/exclusive/e6v2/oe_bmc/oe_bmc.c index 97d354653f..a0a6c579bd 100644 --- a/keyboards/exclusive/e6v2/oe_bmc/oe_bmc.c +++ b/keyboards/exclusive/e6v2/oe_bmc/oe_bmc.c @@ -16,32 +16,19 @@ #include "oe_bmc.h" -void backlight_init_ports(void) { - // initialize pins D0, D1, D4 and D6 as output - setPinOutput(D0); - setPinOutput(D1); - setPinOutput(D4); - setPinOutput(D6); +void keyboard_pre_init_kb(void) { + led_init_ports(); + keyboard_pre_init_user(); +} - // turn backlight LEDs on - writePinHigh(D0); +void led_init_ports(void) { + setPinOutput(D1); writePinHigh(D1); - writePinHigh(D4); - writePinHigh(D6); } -void backlight_set(uint8_t level) { - if (level == 0) { - // turn backlight LEDs off - writePinLow(D0); - writePinLow(D1); - writePinLow(D4); - writePinLow(D6); - } else { - // turn backlight LEDs on - writePinHigh(D0); - writePinHigh(D1); - writePinHigh(D4); - writePinHigh(D6); +bool led_update_kb(led_t led_state) { + if (led_update_user(led_state)) { + writePin(D1, !led_state.caps_lock); } + return true; } diff --git a/keyboards/exclusive/e6v2/oe_bmc/rules.mk b/keyboards/exclusive/e6v2/oe_bmc/rules.mk index 106044ba72..ded651d3d8 100644 --- a/keyboards/exclusive/e6v2/oe_bmc/rules.mk +++ b/keyboards/exclusive/e6v2/oe_bmc/rules.mk @@ -17,13 +17,13 @@ BOOTLOADER = bootloadHID BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) MOUSEKEY_ENABLE = yes # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) +CONSOLE_ENABLE = no # Console for debug(+400) COMMAND_ENABLE = yes # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default WS2812_DRIVER = i2c RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) diff --git a/keyboards/exent/config.h b/keyboards/exent/config.h index 08d241f653..4921746c1c 100644 --- a/keyboards/exent/config.h +++ b/keyboards/exent/config.h @@ -39,7 +39,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DIODE_DIRECTION COL2ROW #define DEBOUNCE 5 -#define BACKLIGHT_LEVELS 1 +#define BACKLIGHT_PIN D4 +#define BACKLIGHT_LEVELS 3 #define RGBLIGHT_ANIMATIONS #define NO_UART 1 diff --git a/keyboards/exent/exent.c b/keyboards/exent/exent.c index 82066f7e85..c6870f2c79 100644 --- a/keyboards/exent/exent.c +++ b/keyboards/exent/exent.c @@ -15,3 +15,26 @@ */ #include "exent.h" + +void keyboard_pre_init_kb(void) { + led_init_ports(); + keyboard_pre_init_user(); +} + +void led_init_ports(void) { + setPinOutput(D0); + setPinOutput(D1); + setPinOutput(D6); + writePinHigh(D0); + writePinHigh(D1); + writePinHigh(D6); +} + +bool led_update_kb(led_t led_state) { + if (led_update_user(led_state)) { + writePin(D0, !led_state.num_lock); + writePin(D1, !led_state.caps_lock); + writePin(D6, !led_state.scroll_lock); + } + return true; +} diff --git a/keyboards/exent/rules.mk b/keyboards/exent/rules.mk index 10442b31ba..0ea425ac7e 100644 --- a/keyboards/exent/rules.mk +++ b/keyboards/exent/rules.mk @@ -17,7 +17,7 @@ MOUSEKEY_ENABLE = no EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = yes COMMAND_ENABLE = yes -BACKLIGHT_ENABLE = no +BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = yes WS2812_DRIVER = i2c diff --git a/keyboards/facew/config.h b/keyboards/facew/config.h index 9a31f92783..0dc35e6258 100644 --- a/keyboards/facew/config.h +++ b/keyboards/facew/config.h @@ -37,5 +37,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DIODE_DIRECTION COL2ROW #define DEBOUNCE 5 -#define BACKLIGHT_LEVELS 1 +#define BACKLIGHT_PIN D4 +#define BACKLIGHT_LEVELS 3 #define RGBLIGHT_ANIMATIONS diff --git a/keyboards/facew/facew.c b/keyboards/facew/facew.c index fa58f0cf79..fc176466fe 100644 --- a/keyboards/facew/facew.c +++ b/keyboards/facew/facew.c @@ -17,30 +17,21 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "facew.h" -void backlight_init_ports(void) { - setPinOutput(D0); - setPinOutput(D1); - setPinOutput(D4); - setPinOutput(D6); +void keyboard_pre_init_kb(void) { + led_init_ports(); + keyboard_pre_init_user(); +} - writePinLow(D0); - writePinLow(D1); - writePinLow(D4); - writePinLow(D6); +void led_init_ports(void) { + setPinOutput(D0); + setPinOutput(D1); + writePinHigh(D0); + writePinHigh(D1); } -void backlight_set(uint8_t level) { - if (level == 0) { - // Turn out the lights - writePinLow(D0); - writePinLow(D1); - writePinLow(D4); - writePinLow(D6); - } else { - // Turn on the lights - writePinHigh(D0); - writePinHigh(D1); - writePinHigh(D4); - writePinHigh(D6); - } +bool led_update_kb(led_t led_state) { + if (led_update_user(led_state)) { + writePin(D1, !led_state.caps_lock); + } + return true; } diff --git a/keyboards/facew/rules.mk b/keyboards/facew/rules.mk index c4117d15d7..81cfb758c0 100644 --- a/keyboards/facew/rules.mk +++ b/keyboards/facew/rules.mk @@ -15,7 +15,7 @@ BOOTLOADER = bootloadHID BOOTMAGIC_ENABLE = no MOUSEKEY_ENABLE = yes EXTRAKEY_ENABLE = yes -CONSOLE_ENABLE = yes +CONSOLE_ENABLE = no COMMAND_ENABLE = yes BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = yes diff --git a/keyboards/ft/mars80/config.h b/keyboards/ft/mars80/config.h index 1bf9392872..38c3e851a8 100644 --- a/keyboards/ft/mars80/config.h +++ b/keyboards/ft/mars80/config.h @@ -38,7 +38,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DIODE_DIRECTION COL2ROW #define DEBOUNCE 5 -#define BACKLIGHT_LEVELS 1 +#define BACKLIGHT_PIN D4 +#define BACKLIGHT_LEVELS 3 #define RGBLIGHT_ANIMATIONS #define NO_UART 1 diff --git a/keyboards/ft/mars80/mars80.c b/keyboards/ft/mars80/mars80.c index 8e51274087..ca1950353b 100644 --- a/keyboards/ft/mars80/mars80.c +++ b/keyboards/ft/mars80/mars80.c @@ -16,32 +16,22 @@ #include "mars80.h" -void backlight_init_ports(void) { - // initialize pins D0, D1, D4 and D6 as output - setPinOutput(D0); +void keyboard_pre_init_kb(void) { + led_init_ports(); + keyboard_pre_init_user(); +} + +void led_init_ports(void) { setPinOutput(D1); - setPinOutput(D4); setPinOutput(D6); - - // turn backlight LEDs on - writePinHigh(D0); writePinHigh(D1); - writePinHigh(D4); writePinHigh(D6); } -void backlight_set(uint8_t level) { - if (level == 0) { - // turn backlight LEDs off - writePinLow(D0); - writePinLow(D1); - writePinLow(D4); - writePinLow(D6); - } else { - // turn backlight LEDs on - writePinHigh(D0); - writePinHigh(D1); - writePinHigh(D4); - writePinHigh(D6); +bool led_update_kb(led_t led_state) { + if (led_update_user(led_state)) { + writePin(D1, !led_state.caps_lock); + writePin(D6, !led_state.scroll_lock); } + return true; } diff --git a/keyboards/gray_studio/hb85/hb85.c b/keyboards/gray_studio/hb85/hb85.c index 21562b9e0f..57f5e60314 100644 --- a/keyboards/gray_studio/hb85/hb85.c +++ b/keyboards/gray_studio/hb85/hb85.c @@ -18,32 +18,25 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "hb85.h" -void backlight_init_ports(void) { - // initialize pins D0, D1, D4 and D6 as output +void keyboard_pre_init_kb(void) { + led_init_ports(); + keyboard_pre_init_user(); +} + +void led_init_ports(void) { setPinOutput(D0); setPinOutput(D1); - setPinOutput(D4); setPinOutput(D6); - - // turn backlight LEDs on writePinHigh(D0); writePinHigh(D1); - writePinHigh(D4); writePinHigh(D6); } -void backlight_set(uint8_t level) { - if (level == 0) { - // turn backlight LEDs off - writePinLow(D0); - writePinLow(D1); - writePinLow(D4); - writePinLow(D6); - } else { - // turn backlight LEDs on - writePinHigh(D0); - writePinHigh(D1); - writePinHigh(D4); - writePinHigh(D6); +bool led_update_kb(led_t led_state) { + if (led_update_user(led_state)) { + writePin(D0, !led_state.num_lock); + writePin(D1, !led_state.caps_lock); + writePin(D6, !led_state.scroll_lock); } + return true; } diff --git a/keyboards/gray_studio/hb85/rules.mk b/keyboards/gray_studio/hb85/rules.mk index ec57b03dcb..79b783e421 100644 --- a/keyboards/gray_studio/hb85/rules.mk +++ b/keyboards/gray_studio/hb85/rules.mk @@ -17,7 +17,7 @@ MOUSEKEY_ENABLE = no EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = yes COMMAND_ENABLE = yes -BACKLIGHT_ENABLE = no +BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = yes WS2812_DRIVER = i2c diff --git a/keyboards/jc65/v32a/config.h b/keyboards/jc65/v32a/config.h index 5439dbe396..392aebc2a4 100644 --- a/keyboards/jc65/v32a/config.h +++ b/keyboards/jc65/v32a/config.h @@ -32,7 +32,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7 } #define DIODE_DIRECTION COL2ROW -#define BACKLIGHT_LEVELS 1 +#define BACKLIGHT_PIN D4 +#define BACKLIGHT_LEVELS 3 + #define RGBLED_NUM 16 #define RGBLIGHT_ANIMATIONS #define RGBLIGHT_HUE_STEP 8 diff --git a/keyboards/jc65/v32a/v32a.c b/keyboards/jc65/v32a/v32a.c index 2a289872fe..627661a57c 100644 --- a/keyboards/jc65/v32a/v32a.c +++ b/keyboards/jc65/v32a/v32a.c @@ -17,32 +17,19 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "v32a.h" -#ifdef BACKLIGHT_ENABLE -void backlight_init_ports(void) { - setPinOutput(D0); - setPinOutput(D1); - setPinOutput(D4); - setPinOutput(D6); +void keyboard_pre_init_kb(void) { + led_init_ports(); + keyboard_pre_init_user(); +} - writePinLow(D0); - writePinLow(D1); - writePinLow(D4); - writePinLow(D6); +void led_init_ports(void) { + setPinOutput(D1); + writePinHigh(D1); } -void backlight_set(uint8_t level) { - if (level == 0) { - // Turn out the lights - writePinLow(D0); - writePinLow(D1); - writePinLow(D4); - writePinLow(D6); - } else { - // Turn on the lights - writePinHigh(D0); - writePinHigh(D1); - writePinHigh(D4); - writePinHigh(D6); - } +bool led_update_kb(led_t led_state) { + if (led_update_user(led_state)) { + writePin(D1, !led_state.caps_lock); + } + return true; } -#endif diff --git a/keyboards/jj40/config.h b/keyboards/jj40/config.h index 2310ce87e2..90bcacfd16 100644 --- a/keyboards/jj40/config.h +++ b/keyboards/jj40/config.h @@ -35,7 +35,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define BACKLIGHT_PIN D4 #define BACKLIGHT_LEVELS 12 -// #define BACKLIGHT_BREATHING // Requires #4324 to enable hardware pwm for atmega32a +#define BACKLIGHT_BREATHING /* RGB underglow */ // NOTE: for PS2AVRGB boards, underglow commands are sent via I2C to 0xB0. diff --git a/keyboards/jj4x4/config.h b/keyboards/jj4x4/config.h index 8918e60dad..b3f33d6e7a 100644 --- a/keyboards/jj4x4/config.h +++ b/keyboards/jj4x4/config.h @@ -38,7 +38,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define BACKLIGHT_PIN D4 #define BACKLIGHT_LEVELS 12 -// #define BACKLIGHT_BREATHING // Requires #4324 to enable hardware pwm for atmega32a +#define BACKLIGHT_BREATHING /* RGB underglow */ // NOTE: for PS2AVRGB boards, underglow commands are sent via I2C to 0xB0. diff --git a/keyboards/jj50/backlight.c b/keyboards/jj50/backlight.c deleted file mode 100644 index fbd241fa9d..0000000000 --- a/keyboards/jj50/backlight.c +++ /dev/null @@ -1,213 +0,0 @@ -/** - * Backlighting code for PS2AVRGB boards (ATMEGA32A) - * Kenneth A. (github.com/krusli | krusli.me) - */ - -#include "backlight.h" -#include "quantum.h" - -#include <avr/pgmspace.h> -#include <avr/interrupt.h> - -#include "backlight_custom.h" -#include "breathing_custom.h" - -// DEBUG -#include <stdlib.h> -#include <stdio.h> - -// Port D: digital pins of the AVR chipset -#define NUMLOCK_PORT (1 << 0) // D0 -#define CAPSLOCK_PORT (1 << 1) // D1 -#define BACKLIGHT_PORT (1 << 4) // D4 -#define SCROLLLOCK_PORT (1 << 6) // D6 - -#define TIMER_CLK_DIV64 0x03 ///< Timer clocked at F_CPU/64 -#define TIMER1PRESCALE TIMER_CLK_DIV64 ///< timer 1 prescaler default - -#define TIMER_PRESCALE_MASK 0x07 ///< Timer Prescaler Bit-Mask - -#define PWM_MAX 0xFF -#define TIMER_TOP 255 // 8 bit PWM - -extern backlight_config_t backlight_config; - -/** - * References - * Port Registers: https://www.arduino.cc/en/Reference/PortManipulation - * TCCR1A: https://electronics.stackexchange.com/questions/92350/what-is-the-difference-between-tccr1a-and-tccr1b - * Timers: http://www.avrbeginners.net/architecture/timers/timers.html - * 16-bit timer setup: http://sculland.com/ATmega168/Interrupts-And-Timers/16-Bit-Timer-Setup/ - * PS2AVRGB firmware: https://github.com/showjean/ps2avrU/tree/master/firmware - */ - -// @Override -// turn LEDs on and off depending on USB caps/num/scroll lock states. -__attribute__ ((weak)) -void led_set_user(uint8_t usb_led) { - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - // turn on - DDRD |= NUMLOCK_PORT; - PORTD |= NUMLOCK_PORT; - } else { - // turn off - DDRD &= ~NUMLOCK_PORT; - PORTD &= ~NUMLOCK_PORT; - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - DDRD |= CAPSLOCK_PORT; - PORTD |= CAPSLOCK_PORT; - } else { - DDRD &= ~CAPSLOCK_PORT; - PORTD &= ~CAPSLOCK_PORT; - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - DDRD |= SCROLLLOCK_PORT; - PORTD |= SCROLLLOCK_PORT; - } else { - DDRD &= ~SCROLLLOCK_PORT; - PORTD &= ~SCROLLLOCK_PORT; - } -} - -#ifdef BACKLIGHT_ENABLE - -// sets up Timer 1 for 8-bit PWM -void timer1PWMSetup(void) { // NOTE ONLY CALL THIS ONCE - // default 8 bit mode - TCCR1A &= ~(1 << 1); // cbi(TCCR1A,PWM11); <- set PWM11 bit to HIGH - TCCR1A |= (1 << 0); // sbi(TCCR1A,PWM10); <- set PWM10 bit to LOW - - // clear output compare value A - // outb(OCR1AH, 0); - // outb(OCR1AL, 0); - - // clear output comparator registers for B - OCR1BH = 0; // outb(OCR1BH, 0); - OCR1BL = 0; // outb(OCR1BL, 0); -} - -bool is_init = false; -void timer1Init(void) { - // timer1SetPrescaler(TIMER1PRESCALE) - // set to DIV/64 - (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | TIMER1PRESCALE; - - // reset TCNT1 - TCNT1H = 0; // outb(TCNT1H, 0); - TCNT1L = 0; // outb(TCNT1L, 0); - - // TOIE1: Timer Overflow Interrupt Enable (Timer 1); - TIMSK |= _BV(TOIE1); // sbi(TIMSK, TOIE1); - - is_init = true; -} - -void timer1UnInit(void) { - // set prescaler back to NONE - (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | 0x00; // TIMERRTC_CLK_STOP - - // disable timer overflow interrupt - TIMSK &= ~_BV(TOIE1); // overflow bit? - - setPWM(0); - - is_init = false; -} - - -// handle TCNT1 overflow -//! Interrupt handler for tcnt1 overflow interrupt -ISR(TIMER1_OVF_vect, ISR_NOBLOCK) -{ - // sei(); - // handle breathing here - #ifdef BACKLIGHT_BREATHING - if (is_breathing()) { - custom_breathing_handler(); - } - #endif - - // TODO call user defined function -} - -// enable timer 1 PWM -// timer1PWMBOn() -void timer1PWMBEnable(void) { - // turn on channel B (OC1B) PWM output - // set OC1B as non-inverted PWM - TCCR1A |= _BV(COM1B1); - TCCR1A &= ~_BV(COM1B0); -} - -// disable timer 1 PWM -// timer1PWMBOff() -void timer1PWMBDisable(void) { - TCCR1A &= ~_BV(COM1B1); - TCCR1A &= ~_BV(COM1B0); -} - -void enableBacklight(void) { - DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output - PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high -} - -void disableBacklight(void) { - // DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input - PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low -} - -void startPWM(void) { - timer1Init(); - timer1PWMBEnable(); - enableBacklight(); -} - -void stopPWM(void) { - timer1UnInit(); - disableBacklight(); - timer1PWMBDisable(); -} - -void b_led_init_ports(void) { - /* turn backlight on/off depending on user preference */ - #if BACKLIGHT_ON_STATE == 0 - // DDRx register: sets the direction of Port D - // DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input - PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low - #else - DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output - PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high - #endif - - timer1PWMSetup(); - startPWM(); - - #ifdef BACKLIGHT_BREATHING - breathing_enable(); - #endif -} - -void b_led_set(uint8_t level) { - if (level > BACKLIGHT_LEVELS) { - level = BACKLIGHT_LEVELS; - } - - setPWM((int)(TIMER_TOP * (float) level / BACKLIGHT_LEVELS)); -} - -// called every matrix scan -void b_led_task(void) { - // do nothing for now -} - -void setPWM(uint16_t xValue) { - if (xValue > TIMER_TOP) { - xValue = TIMER_TOP; - } - OCR1B = xValue; // timer1PWMBSet(xValue); -} - -#endif // BACKLIGHT_ENABLE diff --git a/keyboards/jj50/backlight_custom.h b/keyboards/jj50/backlight_custom.h deleted file mode 100644 index 7210be840e..0000000000 --- a/keyboards/jj50/backlight_custom.h +++ /dev/null @@ -1,15 +0,0 @@ -/** - * Backlighting code for PS2AVRGB boards (ATMEGA32A) - * Kenneth A. (github.com/krusli | krusli.me) - */ - -#ifndef BACKLIGHT_CUSTOM_H -#define BACKLIGHT_CUSTOM_H - -#include <avr/pgmspace.h> -void b_led_init_ports(void); -void b_led_set(uint8_t level); -void b_led_task(void); -void setPWM(uint16_t xValue); - -#endif // BACKLIGHT_CUSTOM_H diff --git a/keyboards/jj50/breathing_custom.h b/keyboards/jj50/breathing_custom.h deleted file mode 100644 index 71416b1b45..0000000000 --- a/keyboards/jj50/breathing_custom.h +++ /dev/null @@ -1,140 +0,0 @@ -/** - * Breathing effect code for PS2AVRGB boards (ATMEGA32A) - * Works in conjunction with `backlight.c`. - * - * Code adapted from `quantum.c` to register with the existing TIMER1 overflow - * handler in `backlight.c` instead of setting up its own timer. - * Kenneth A. (github.com/krusli | krusli.me) - */ - -#ifdef BACKLIGHT_ENABLE -#ifdef BACKLIGHT_BREATHING - -#include "backlight_custom.h" - -#ifndef BREATHING_PERIOD -#define BREATHING_PERIOD 6 -#endif - -#define breathing_min() do {breathing_counter = 0;} while (0) -#define breathing_max() do {breathing_counter = breathing_period * 244 / 2;} while (0) - -// TODO make this share code with quantum.c - -#define BREATHING_NO_HALT 0 -#define BREATHING_HALT_OFF 1 -#define BREATHING_HALT_ON 2 -#define BREATHING_STEPS 128 - -static uint8_t breathing_period = BREATHING_PERIOD; -static uint8_t breathing_halt = BREATHING_NO_HALT; -static uint16_t breathing_counter = 0; - -static bool breathing = false; - -bool is_breathing(void) { - return breathing; -} - -// See http://jared.geek.nz/2013/feb/linear-led-pwm -static uint16_t cie_lightness(uint16_t v) { - if (v <= 5243) // if below 8% of max - return v / 9; // same as dividing by 900% - else { - uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare - // to get a useful result with integer division, we shift left in the expression above - // and revert what we've done again after squaring. - y = y * y * y >> 8; - if (y > 0xFFFFUL) // prevent overflow - return 0xFFFFU; - else - return (uint16_t) y; - } -} - -void breathing_enable(void) { - breathing = true; - breathing_counter = 0; - breathing_halt = BREATHING_NO_HALT; - // interrupt already registered -} - -void breathing_pulse(void) { - if (get_backlight_level() == 0) - breathing_min(); - else - breathing_max(); - breathing_halt = BREATHING_HALT_ON; - // breathing_interrupt_enable(); - breathing = true; -} - -void breathing_disable(void) { - breathing = false; - // backlight_set(get_backlight_level()); - b_led_set(get_backlight_level()); // custom implementation of backlight_set() -} - -void breathing_self_disable(void) -{ - if (get_backlight_level() == 0) - breathing_halt = BREATHING_HALT_OFF; - else - breathing_halt = BREATHING_HALT_ON; -} - -void breathing_toggle(void) { - if (is_breathing()) - breathing_disable(); - else - breathing_enable(); -} - -void breathing_period_set(uint8_t value) -{ - if (!value) - value = 1; - breathing_period = value; -} - -void breathing_period_default(void) { - breathing_period_set(BREATHING_PERIOD); -} - -void breathing_period_inc(void) -{ - breathing_period_set(breathing_period+1); -} - -void breathing_period_dec(void) -{ - breathing_period_set(breathing_period-1); -} - -/* To generate breathing curve in python: - * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)] - */ -static const uint8_t breathing_table[BREATHING_STEPS] PROGMEM = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; - -// Use this before the cie_lightness function. -static inline uint16_t scale_backlight(uint16_t v) { - return v / BACKLIGHT_LEVELS * get_backlight_level(); -} - -void custom_breathing_handler(void) { - uint16_t interval = (uint16_t) breathing_period * 244 / BREATHING_STEPS; - // resetting after one period to prevent ugly reset at overflow. - breathing_counter = (breathing_counter + 1) % (breathing_period * 244); - uint8_t index = breathing_counter / interval % BREATHING_STEPS; - - if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) || - ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1))) - { - // breathing_interrupt_disable(); - } - - setPWM(cie_lightness(scale_backlight((uint16_t) pgm_read_byte(&breathing_table[index]) * 0x0101U))); -} - -#endif // BACKLIGHT_BREATHING -#endif // BACKLIGHT_ENABLE diff --git a/keyboards/jj50/config.h b/keyboards/jj50/config.h index 884a28d506..9b9feb0676 100644 --- a/keyboards/jj50/config.h +++ b/keyboards/jj50/config.h @@ -38,7 +38,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4 } #define DIODE_DIRECTION COL2ROW -//#define BACKLIGHT_PIN D4 +#define BACKLIGHT_PIN D4 #define BACKLIGHT_LEVELS 12 #define RGB_DI_PIN E2 diff --git a/keyboards/jj50/jj50.c b/keyboards/jj50/jj50.c index a302adf405..91b10aebee 100644 --- a/keyboards/jj50/jj50.c +++ b/keyboards/jj50/jj50.c @@ -16,20 +16,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include "jj50.h" - -#include "backlight.h" -#include "backlight_custom.h" - -#ifdef BACKLIGHT_ENABLE -void backlight_init_ports(void) { - b_led_init_ports(); -} - -void backlight_task(void) { - b_led_task(); -} - -void backlight_set(uint8_t level) { - b_led_set(level); -} -#endif diff --git a/keyboards/jj50/rules.mk b/keyboards/jj50/rules.mk index 62b21e4df2..38faf37162 100644 --- a/keyboards/jj50/rules.mk +++ b/keyboards/jj50/rules.mk @@ -29,6 +29,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend #OPT_DEFS = -DDEBUG_LEVEL=0 -SRC = backlight.c - LAYOUTS = ortho_5x12 diff --git a/keyboards/kbdfans/kbdpad/mk1/mk1.c b/keyboards/kbdfans/kbdpad/mk1/mk1.c index aa781875ce..f5fe47741b 100644 --- a/keyboards/kbdfans/kbdpad/mk1/mk1.c +++ b/keyboards/kbdfans/kbdpad/mk1/mk1.c @@ -16,14 +16,19 @@ #include "mk1.h" -#define NUMLOCK_PIN D0 +void keyboard_pre_init_kb(void) { + led_init_ports(); + keyboard_pre_init_user(); +} -void matrix_init_kb(void) { - setPinOutput(NUMLOCK_PIN); - matrix_init_user(); +void led_init_ports(void) { + setPinOutput(D0); + writePinHigh(D0); } -void led_set_kb(uint8_t usb_led) { - writePin(NUMLOCK_PIN, IS_LED_ON(usb_led, USB_LED_NUM_LOCK)); - led_set_user(usb_led); +bool led_update_kb(led_t led_state) { + if (led_update_user(led_state)) { + writePin(D0, !led_state.num_lock); + } + return true; } diff --git a/keyboards/mechmini/v1/config.h b/keyboards/mechmini/v1/config.h index eb15a368ad..07422f9ffd 100644 --- a/keyboards/mechmini/v1/config.h +++ b/keyboards/mechmini/v1/config.h @@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifndef V1_CONFIG_H -#define V1_CONFIG_H +#pragma once #include "config_common.h" @@ -38,11 +37,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define NO_UART 1 +#define BACKLIGHT_PIN D4 +#define BACKLIGHT_LEVELS 3 + /* RGB underglow */ // The RGB_DI_PIN value seems to be shared between all PS2AVRGB boards. // The same pin is used on the JJ40, at least. #define RGBLED_NUM 16 #define RGBLIGHT_ANIMATIONS #define RGB_DI_PIN E2 - -#endif diff --git a/keyboards/mechmini/v1/rules.mk b/keyboards/mechmini/v1/rules.mk index 1c6252c59b..6f2adc2f81 100644 --- a/keyboards/mechmini/v1/rules.mk +++ b/keyboards/mechmini/v1/rules.mk @@ -17,7 +17,7 @@ MOUSEKEY_ENABLE = yes EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = yes COMMAND_ENABLE = yes -BACKLIGHT_ENABLE = no +BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = yes WS2812_DRIVER = i2c diff --git a/keyboards/mehkee96/config.h b/keyboards/mehkee96/config.h index d506626d1e..afc9d0a7b1 100644 --- a/keyboards/mehkee96/config.h +++ b/keyboards/mehkee96/config.h @@ -16,6 +16,9 @@ #define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7 } #define DIODE_DIRECTION COL2ROW +#define BACKLIGHT_PIN D4 +#define BACKLIGHT_LEVELS 3 + #define RGBLED_NUM 16 #define RGBLIGHT_ANIMATIONS /* key combination for command */ diff --git a/keyboards/mehkee96/mehkee96.c b/keyboards/mehkee96/mehkee96.c index d9e2bac7a5..2da25b6b84 100644 --- a/keyboards/mehkee96/mehkee96.c +++ b/keyboards/mehkee96/mehkee96.c @@ -16,3 +16,23 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include "mehkee96.h" + +void keyboard_pre_init_kb(void) { + led_init_ports(); + keyboard_pre_init_user(); +} + +void led_init_ports(void) { + setPinOutput(D0); + setPinOutput(D1); + writePinHigh(D0); + writePinHigh(D1); +} + +bool led_update_kb(led_t led_state) { + if (led_update_user(led_state)) { + writePin(D0, !led_state.num_lock); + writePin(D1, !led_state.caps_lock); + } + return true; +} diff --git a/keyboards/mehkee96/rules.mk b/keyboards/mehkee96/rules.mk index a7d36548f0..772706e6cc 100644 --- a/keyboards/mehkee96/rules.mk +++ b/keyboards/mehkee96/rules.mk @@ -17,9 +17,9 @@ BOOTLOADER = bootloadHID BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) MOUSEKEY_ENABLE = yes # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) +CONSOLE_ENABLE = no # Console for debug(+400) COMMAND_ENABLE = yes # Commands for debug and configuration -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes WS2812_DRIVER = i2c diff --git a/keyboards/panc60/config.h b/keyboards/panc60/config.h index c565f39bcc..b3bcdc9733 100644 --- a/keyboards/panc60/config.h +++ b/keyboards/panc60/config.h @@ -37,5 +37,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DIODE_DIRECTION COL2ROW #define DEBOUNCE 5 -#define BACKLIGHT_LEVELS 1 +#define BACKLIGHT_PIN D4 +#define BACKLIGHT_LEVELS 3 + #define RGBLIGHT_ANIMATIONS diff --git a/keyboards/panc60/panc60.c b/keyboards/panc60/panc60.c index 6bd16a4bdc..a200b25878 100644 --- a/keyboards/panc60/panc60.c +++ b/keyboards/panc60/panc60.c @@ -16,30 +16,19 @@ #include "panc60.h" -void backlight_init_ports(void) { - setPinOutput(D0); - setPinOutput(D1); - setPinOutput(D4); - setPinOutput(D6); +void keyboard_pre_init_kb(void) { + led_init_ports(); + keyboard_pre_init_user(); +} - writePinLow(D0); - writePinLow(D1); - writePinLow(D4); - writePinLow(D6); +void led_init_ports(void) { + setPinOutput(D1); + writePinHigh(D1); } -void backlight_set(uint8_t level) { - if (level == 0) { - // Turn out the lights - writePinLow(D0); - writePinLow(D1); - writePinLow(D4); - writePinLow(D6); - } else { - // Turn on the lights - writePinHigh(D0); - writePinHigh(D1); - writePinHigh(D4); - writePinHigh(D6); - } +bool led_update_kb(led_t led_state) { + if (led_update_user(led_state)) { + writePin(D1, !led_state.caps_lock); + } + return true; } diff --git a/keyboards/pearl/config.h b/keyboards/pearl/config.h index 0ae69e8e2b..5dbba3ec0d 100644 --- a/keyboards/pearl/config.h +++ b/keyboards/pearl/config.h @@ -31,7 +31,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 12 -#define BACKLIGHT_LEVELS 1 +#define BACKLIGHT_PIN D4 +#define BACKLIGHT_LEVELS 3 #define MATRIX_ROWS 4 #define MATRIX_COLS 13 diff --git a/keyboards/pearl/pearl.c b/keyboards/pearl/pearl.c index 093b5fdd93..cebbc9fcba 100644 --- a/keyboards/pearl/pearl.c +++ b/keyboards/pearl/pearl.c @@ -17,32 +17,25 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "pearl.h" -void backlight_init_ports(void) { - // initialize pins D0, D1, D4 and D6 as output +void keyboard_pre_init_kb(void) { + led_init_ports(); + keyboard_pre_init_user(); +} + +void led_init_ports(void) { setPinOutput(D0); setPinOutput(D1); - setPinOutput(D4); setPinOutput(D6); - - // turn backlight LEDs on writePinHigh(D0); writePinHigh(D1); - writePinHigh(D4); writePinHigh(D6); } -void backlight_set(uint8_t level) { - if (level == 0) { - // turn backlight LEDs off - writePinLow(D0); - writePinLow(D1); - writePinLow(D4); - writePinLow(D6); - } else { - // turn backlight LEDs on - writePinHigh(D0); - writePinHigh(D1); - writePinHigh(D4); - writePinHigh(D6); +bool led_update_kb(led_t led_state) { + if (led_update_user(led_state)) { + writePin(D0, !led_state.num_lock); + writePin(D1, !led_state.caps_lock); + writePin(D6, !led_state.scroll_lock); } + return true; } diff --git a/keyboards/percent/canoe/canoe.c b/keyboards/percent/canoe/canoe.c index 79c6330fe8..d3c66dbf13 100644 --- a/keyboards/percent/canoe/canoe.c +++ b/keyboards/percent/canoe/canoe.c @@ -17,32 +17,19 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "canoe.h" -#ifdef BACKLIGHT_ENABLE -void backlight_set(uint8_t level) { - if (level == 0) { - // Turn out the lights - writePinLow(D0); - writePinLow(D1); - writePinLow(D4); - writePinLow(D6); - } else { - // Turn on the lights - writePinHigh(D0); - writePinHigh(D1); - writePinHigh(D4); - writePinHigh(D6); - } +void keyboard_pre_init_kb(void) { + led_init_ports(); + keyboard_pre_init_user(); } -void backlight_init_ports(void) { - setPinOutput(D0); - setPinOutput(D1); - setPinOutput(D4); - setPinOutput(D6); +void led_init_ports(void) { + setPinOutput(D1); + writePinHigh(D1); +} - writePinLow(D0); - writePinLow(D1); - writePinLow(D4); - writePinLow(D6); +bool led_update_kb(led_t led_state) { + if (led_update_user(led_state)) { + writePin(D1, !led_state.caps_lock); + } + return true; } -#endif diff --git a/keyboards/percent/canoe/config.h b/keyboards/percent/canoe/config.h index 950e0806e5..21b3dcea64 100644 --- a/keyboards/percent/canoe/config.h +++ b/keyboards/percent/canoe/config.h @@ -38,7 +38,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DIODE_DIRECTION COL2ROW #define DEBOUNCE 5 -#define BACKLIGHT_LEVELS 1 +#define BACKLIGHT_PIN D4 +#define BACKLIGHT_LEVELS 3 + #define RGBLIGHT_ANIMATIONS #define NO_UART 1 diff --git a/keyboards/percent/canoe/rules.mk b/keyboards/percent/canoe/rules.mk index 6340c81224..9661eaefeb 100644 --- a/keyboards/percent/canoe/rules.mk +++ b/keyboards/percent/canoe/rules.mk @@ -17,7 +17,7 @@ MOUSEKEY_ENABLE = no EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = yes COMMAND_ENABLE = yes -BACKLIGHT_ENABLE = no +BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = yes WS2812_DRIVER = i2c diff --git a/keyboards/percent/skog/backlight.c b/keyboards/percent/skog/backlight.c deleted file mode 100644 index 94e8126d88..0000000000 --- a/keyboards/percent/skog/backlight.c +++ /dev/null @@ -1,211 +0,0 @@ -/** - * Backlighting code for PS2AVRGB boards (ATMEGA32A) - * Kenneth A. (github.com/krusli | krusli.me) - */ - -#include "backlight.h" -#include "quantum.h" - -#include <avr/pgmspace.h> -#include <avr/interrupt.h> - -#include "backlight_custom.h" -#include "breathing_custom.h" - -// DEBUG -#include <stdlib.h> -#include <stdio.h> - -// Port D: digital pins of the AVR chipset -#define NUMLOCK_PORT (1 << 0) // D0 -#define CAPSLOCK_PORT (1 << 1) // D1 -#define BACKLIGHT_PORT (1 << 4) // D4 -#define SCROLLLOCK_PORT (1 << 6) // D6 - -#define TIMER_CLK_DIV64 0x03 ///< Timer clocked at F_CPU/64 -#define TIMER1PRESCALE TIMER_CLK_DIV64 ///< timer 1 prescaler default - -#define TIMER_PRESCALE_MASK 0x07 ///< Timer Prescaler Bit-Mask - -#define PWM_MAX 0xFF -#define TIMER_TOP 255 // 8 bit PWM - -extern backlight_config_t backlight_config; - -/** - * References - * Port Registers: https://www.arduino.cc/en/Reference/PortManipulation - * TCCR1A: https://electronics.stackexchange.com/questions/92350/what-is-the-difference-between-tccr1a-and-tccr1b - * Timers: http://www.avrbeginners.net/architecture/timers/timers.html - * 16-bit timer setup: http://sculland.com/ATmega168/Interrupts-And-Timers/16-Bit-Timer-Setup/ - * PS2AVRGB firmware: https://github.com/showjean/ps2avrU/tree/master/firmware - */ - -// @Override -// turn LEDs on and off depending on USB caps/num/scroll lock states. -__attribute__ ((weak)) -void led_set_user(uint8_t usb_led) { - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - // turn on - DDRD |= NUMLOCK_PORT; - PORTD |= NUMLOCK_PORT; - } else { - // turn off - DDRD &= ~NUMLOCK_PORT; - PORTD &= ~NUMLOCK_PORT; - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - DDRD |= CAPSLOCK_PORT; - PORTD |= CAPSLOCK_PORT; - } else { - DDRD &= ~CAPSLOCK_PORT; - PORTD &= ~CAPSLOCK_PORT; - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - DDRD |= SCROLLLOCK_PORT; - PORTD |= SCROLLLOCK_PORT; - } else { - DDRD &= ~SCROLLLOCK_PORT; - PORTD &= ~SCROLLLOCK_PORT; - } -} - -#ifdef BACKLIGHT_ENABLE - -// sets up Timer 1 for 8-bit PWM -void timer1PWMSetup(void) { // NOTE ONLY CALL THIS ONCE - // default 8 bit mode - TCCR1A &= ~(1 << 1); // cbi(TCCR1A,PWM11); <- set PWM11 bit to HIGH - TCCR1A |= (1 << 0); // sbi(TCCR1A,PWM10); <- set PWM10 bit to LOW - - // clear output compare value A - // outb(OCR1AH, 0); - // outb(OCR1AL, 0); - - // clear output comparator registers for B - OCR1BH = 0; // outb(OCR1BH, 0); - OCR1BL = 0; // outb(OCR1BL, 0); -} - -bool is_init = false; -void timer1Init(void) { - // timer1SetPrescaler(TIMER1PRESCALE) - // set to DIV/64 - (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | TIMER1PRESCALE; - - // reset TCNT1 - TCNT1H = 0; // outb(TCNT1H, 0); - TCNT1L = 0; // outb(TCNT1L, 0); - - // TOIE1: Timer Overflow Interrupt Enable (Timer 1); - TIMSK |= _BV(TOIE1); // sbi(TIMSK, TOIE1); - - is_init = true; -} - -void timer1UnInit(void) { - // set prescaler back to NONE - (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | 0x00; // TIMERRTC_CLK_STOP - - // disable timer overflow interrupt - TIMSK &= ~_BV(TOIE1); // overflow bit? - - setPWM(0); - - is_init = false; -} - - -// handle TCNT1 overflow -//! Interrupt handler for tcnt1 overflow interrupt -ISR(TIMER1_OVF_vect, ISR_NOBLOCK) -{ - // sei(); - // handle breathing here - #ifdef BACKLIGHT_BREATHING - if (is_breathing()) { - custom_breathing_handler(); - } - #endif -} - -// enable timer 1 PWM -// timer1PWMBOn() -void timer1PWMBEnable(void) { - // turn on channel B (OC1B) PWM output - // set OC1B as non-inverted PWM - TCCR1A |= _BV(COM1B1); - TCCR1A &= ~_BV(COM1B0); -} - -// disable timer 1 PWM -// timer1PWMBOff() -void timer1PWMBDisable(void) { - TCCR1A &= ~_BV(COM1B1); - TCCR1A &= ~_BV(COM1B0); -} - -void enableBacklight(void) { - DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output - PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high -} - -void disableBacklight(void) { - // DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input - PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low -} - -void startPWM(void) { - timer1Init(); - timer1PWMBEnable(); - enableBacklight(); -} - -void stopPWM(void) { - timer1UnInit(); - disableBacklight(); - timer1PWMBDisable(); -} - -void b_led_init_ports(void) { - /* turn backlight on/off depending on user preference */ - #if BACKLIGHT_ON_STATE == 0 - // DDRx register: sets the direction of Port D - // DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input - PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low - #else - DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output - PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high - #endif - - timer1PWMSetup(); - startPWM(); - - #ifdef BACKLIGHT_BREATHING - breathing_enable(); - #endif -} - -void b_led_set(uint8_t level) { - if (level > BACKLIGHT_LEVELS) { - level = BACKLIGHT_LEVELS; - } - - setPWM((int)(TIMER_TOP * (float) level / BACKLIGHT_LEVELS)); -} - -// called every matrix scan -void b_led_task(void) { - // do nothing for now -} - -void setPWM(uint16_t xValue) { - if (xValue > TIMER_TOP) { - xValue = TIMER_TOP; - } - OCR1B = xValue; // timer1PWMBSet(xValue); -} - -#endif // BACKLIGHT_ENABLE diff --git a/keyboards/percent/skog/backlight_custom.h b/keyboards/percent/skog/backlight_custom.h deleted file mode 100644 index 51365fe3ba..0000000000 --- a/keyboards/percent/skog/backlight_custom.h +++ /dev/null @@ -1,13 +0,0 @@ -/** - * Backlighting code for PS2AVRGB boards (ATMEGA32A) - * Kenneth A. (github.com/krusli | krusli.me) - */ - -#pragma once - -#include <avr/pgmspace.h> -void b_led_init_ports(void); -void b_led_set(uint8_t level); -void b_led_task(void); -void setPWM(uint16_t xValue); - diff --git a/keyboards/percent/skog/breathing_custom.h b/keyboards/percent/skog/breathing_custom.h deleted file mode 100644 index 71416b1b45..0000000000 --- a/keyboards/percent/skog/breathing_custom.h +++ /dev/null @@ -1,140 +0,0 @@ -/** - * Breathing effect code for PS2AVRGB boards (ATMEGA32A) - * Works in conjunction with `backlight.c`. - * - * Code adapted from `quantum.c` to register with the existing TIMER1 overflow - * handler in `backlight.c` instead of setting up its own timer. - * Kenneth A. (github.com/krusli | krusli.me) - */ - -#ifdef BACKLIGHT_ENABLE -#ifdef BACKLIGHT_BREATHING - -#include "backlight_custom.h" - -#ifndef BREATHING_PERIOD -#define BREATHING_PERIOD 6 -#endif - -#define breathing_min() do {breathing_counter = 0;} while (0) -#define breathing_max() do {breathing_counter = breathing_period * 244 / 2;} while (0) - -// TODO make this share code with quantum.c - -#define BREATHING_NO_HALT 0 -#define BREATHING_HALT_OFF 1 -#define BREATHING_HALT_ON 2 -#define BREATHING_STEPS 128 - -static uint8_t breathing_period = BREATHING_PERIOD; -static uint8_t breathing_halt = BREATHING_NO_HALT; -static uint16_t breathing_counter = 0; - -static bool breathing = false; - -bool is_breathing(void) { - return breathing; -} - -// See http://jared.geek.nz/2013/feb/linear-led-pwm -static uint16_t cie_lightness(uint16_t v) { - if (v <= 5243) // if below 8% of max - return v / 9; // same as dividing by 900% - else { - uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare - // to get a useful result with integer division, we shift left in the expression above - // and revert what we've done again after squaring. - y = y * y * y >> 8; - if (y > 0xFFFFUL) // prevent overflow - return 0xFFFFU; - else - return (uint16_t) y; - } -} - -void breathing_enable(void) { - breathing = true; - breathing_counter = 0; - breathing_halt = BREATHING_NO_HALT; - // interrupt already registered -} - -void breathing_pulse(void) { - if (get_backlight_level() == 0) - breathing_min(); - else - breathing_max(); - breathing_halt = BREATHING_HALT_ON; - // breathing_interrupt_enable(); - breathing = true; -} - -void breathing_disable(void) { - breathing = false; - // backlight_set(get_backlight_level()); - b_led_set(get_backlight_level()); // custom implementation of backlight_set() -} - -void breathing_self_disable(void) -{ - if (get_backlight_level() == 0) - breathing_halt = BREATHING_HALT_OFF; - else - breathing_halt = BREATHING_HALT_ON; -} - -void breathing_toggle(void) { - if (is_breathing()) - breathing_disable(); - else - breathing_enable(); -} - -void breathing_period_set(uint8_t value) -{ - if (!value) - value = 1; - breathing_period = value; -} - -void breathing_period_default(void) { - breathing_period_set(BREATHING_PERIOD); -} - -void breathing_period_inc(void) -{ - breathing_period_set(breathing_period+1); -} - -void breathing_period_dec(void) -{ - breathing_period_set(breathing_period-1); -} - -/* To generate breathing curve in python: - * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)] - */ -static const uint8_t breathing_table[BREATHING_STEPS] PROGMEM = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; - -// Use this before the cie_lightness function. -static inline uint16_t scale_backlight(uint16_t v) { - return v / BACKLIGHT_LEVELS * get_backlight_level(); -} - -void custom_breathing_handler(void) { - uint16_t interval = (uint16_t) breathing_period * 244 / BREATHING_STEPS; - // resetting after one period to prevent ugly reset at overflow. - breathing_counter = (breathing_counter + 1) % (breathing_period * 244); - uint8_t index = breathing_counter / interval % BREATHING_STEPS; - - if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) || - ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1))) - { - // breathing_interrupt_disable(); - } - - setPWM(cie_lightness(scale_backlight((uint16_t) pgm_read_byte(&breathing_table[index]) * 0x0101U))); -} - -#endif // BACKLIGHT_BREATHING -#endif // BACKLIGHT_ENABLE diff --git a/keyboards/percent/skog/config.h b/keyboards/percent/skog/config.h index 7a0c703ec9..15844711f6 100644 --- a/keyboards/percent/skog/config.h +++ b/keyboards/percent/skog/config.h @@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D @@ -36,8 +35,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLED_NUM 2 #define RGBLIGHT_ANIMATIONS +#define BACKLIGHT_PIN D4 #define BACKLIGHT_LEVELS 5 #define NO_UART 1 - -#endif diff --git a/keyboards/percent/skog/rules.mk b/keyboards/percent/skog/rules.mk index da03a2e0c3..0d243b8581 100644 --- a/keyboards/percent/skog/rules.mk +++ b/keyboards/percent/skog/rules.mk @@ -21,11 +21,7 @@ BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = yes WS2812_DRIVER = i2c -BACKLIGHT_CUSTOM_DRIVER = yes - OPT_DEFS = -DDEBUG_LEVEL=0 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -SRC = backlight.c diff --git a/keyboards/percent/skog/skog.c b/keyboards/percent/skog/skog.c index 1c26c550e5..241833937b 100644 --- a/keyboards/percent/skog/skog.c +++ b/keyboards/percent/skog/skog.c @@ -19,20 +19,22 @@ ps2avrGB support code by Kenneth A. (bminiex/.[ch]) #include "skog.h" -#include "backlight.h" -#include "backlight_custom.h" - -#ifdef BACKLIGHT_ENABLE -/// Overrides functions in `quantum.c` -void backlight_init_ports(void) { - b_led_init_ports(); +void keyboard_pre_init_kb(void) { + led_init_ports(); + keyboard_pre_init_user(); } -void backlight_task(void) { - b_led_task(); +void led_init_ports(void) { + setPinOutput(D1); + setPinOutput(D6); + writePinHigh(D1); + writePinHigh(D6); } -void backlight_set(uint8_t level) { - b_led_set(level); +bool led_update_kb(led_t led_state) { + if (led_update_user(led_state)) { + writePin(D1, !led_state.caps_lock); + writePin(D6, !led_state.scroll_lock); + } + return true; } -#endif diff --git a/keyboards/percent/skog_lite/config.h b/keyboards/percent/skog_lite/config.h index 97d11238e3..ec3928b72e 100644 --- a/keyboards/percent/skog_lite/config.h +++ b/keyboards/percent/skog_lite/config.h @@ -38,5 +38,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DIODE_DIRECTION COL2ROW #define DEBOUNCE 5 -#define BACKLIGHT_LEVELS 1 +#define BACKLIGHT_PIN D4 +#define BACKLIGHT_LEVELS 3 + #define RGBLIGHT_ANIMATIONS diff --git a/keyboards/percent/skog_lite/skog_lite.c b/keyboards/percent/skog_lite/skog_lite.c index a6c00f5293..e611885a61 100644 --- a/keyboards/percent/skog_lite/skog_lite.c +++ b/keyboards/percent/skog_lite/skog_lite.c @@ -16,32 +16,22 @@ #include "skog_lite.h" -void backlight_init_ports(void) { - // initialize pins D0, D1, D4 and D6 as output - setPinOutput(D0); +void keyboard_pre_init_kb(void) { + led_init_ports(); + keyboard_pre_init_user(); +} + +void led_init_ports(void) { setPinOutput(D1); - setPinOutput(D4); setPinOutput(D6); - - // turn backlight LEDs on - writePinHigh(D0); writePinHigh(D1); - writePinHigh(D4); writePinHigh(D6); } -void backlight_set(uint8_t level) { - if (level == 0) { - // turn backlight LEDs off - writePinLow(D0); - writePinLow(D1); - writePinLow(D4); - writePinLow(D6); - } else { - // turn backlight LEDs on - writePinHigh(D0); - writePinHigh(D1); - writePinHigh(D4); - writePinHigh(D6); +bool led_update_kb(led_t led_state) { + if (led_update_user(led_state)) { + writePin(D1, !led_state.caps_lock); + writePin(D6, !led_state.scroll_lock); } + return true; } diff --git a/keyboards/singa/config.h b/keyboards/singa/config.h index badaef5136..e998e6ea96 100644 --- a/keyboards/singa/config.h +++ b/keyboards/singa/config.h @@ -37,5 +37,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DIODE_DIRECTION COL2ROW #define DEBOUNCE 5 -#define BACKLIGHT_LEVELS 1 +#define BACKLIGHT_PIN D4 +#define BACKLIGHT_LEVELS 3 + #define RGBLIGHT_ANIMATIONS diff --git a/keyboards/singa/rules.mk b/keyboards/singa/rules.mk index 54328d248d..84eace5ed6 100644 --- a/keyboards/singa/rules.mk +++ b/keyboards/singa/rules.mk @@ -15,7 +15,7 @@ BOOTLOADER = bootloadHID BOOTMAGIC_ENABLE = no MOUSEKEY_ENABLE = yes EXTRAKEY_ENABLE = yes -CONSOLE_ENABLE = yes +CONSOLE_ENABLE = no COMMAND_ENABLE = yes BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = yes diff --git a/keyboards/singa/singa.c b/keyboards/singa/singa.c index 144065d029..7b60e3c29d 100644 --- a/keyboards/singa/singa.c +++ b/keyboards/singa/singa.c @@ -16,32 +16,19 @@ #include "singa.h" -void backlight_init_ports(void) { - // initialize pins D0, D1, D4 and D6 as output - setPinOutput(D0); - setPinOutput(D1); - setPinOutput(D4); - setPinOutput(D6); +void keyboard_pre_init_kb(void) { + led_init_ports(); + keyboard_pre_init_user(); +} - // turn backlight LEDs on - writePinHigh(D0); +void led_init_ports(void) { + setPinOutput(D1); writePinHigh(D1); - writePinHigh(D4); - writePinHigh(D6); } -void backlight_set(uint8_t level) { - if (level == 0) { - // turn backlight LEDs off - writePinLow(D0); - writePinLow(D1); - writePinLow(D4); - writePinLow(D6); - } else { - // turn backlight LEDs on - writePinHigh(D0); - writePinHigh(D1); - writePinHigh(D4); - writePinHigh(D6); +bool led_update_kb(led_t led_state) { + if (led_update_user(led_state)) { + writePin(D1, !led_state.caps_lock); } + return true; } diff --git a/keyboards/tgr/alice/alice.c b/keyboards/tgr/alice/alice.c index 39aed2cf56..9fb4957ac8 100644 --- a/keyboards/tgr/alice/alice.c +++ b/keyboards/tgr/alice/alice.c @@ -16,3 +16,26 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include "alice.h" + +void keyboard_pre_init_kb(void) { + led_init_ports(); + keyboard_pre_init_user(); +} + +void led_init_ports(void) { + setPinOutput(D0); + setPinOutput(D1); + setPinOutput(D6); + writePinHigh(D0); + writePinHigh(D1); + writePinHigh(D6); +} + +bool led_update_kb(led_t led_state) { + if (led_update_user(led_state)) { + writePin(D0, !led_state.num_lock); + writePin(D1, !led_state.caps_lock); + writePin(D6, !led_state.scroll_lock); + } + return true; +} diff --git a/keyboards/tgr/alice/config.h b/keyboards/tgr/alice/config.h index 4c36896b70..1f1b32d4e3 100644 --- a/keyboards/tgr/alice/config.h +++ b/keyboards/tgr/alice/config.h @@ -33,6 +33,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7 } #define DIODE_DIRECTION COL2ROW +#define BACKLIGHT_PIN D4 +#define BACKLIGHT_LEVELS 3 + #define RGBLED_NUM 18 #define RGBLIGHT_ANIMATIONS diff --git a/keyboards/tgr/alice/rules.mk b/keyboards/tgr/alice/rules.mk index 530e8ea329..a8fea7efa7 100644 --- a/keyboards/tgr/alice/rules.mk +++ b/keyboards/tgr/alice/rules.mk @@ -17,7 +17,7 @@ MOUSEKEY_ENABLE = no EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = yes COMMAND_ENABLE = yes -BACKLIGHT_ENABLE = no +BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = yes WS2812_DRIVER = i2c diff --git a/keyboards/tgr/jane/config.h b/keyboards/tgr/jane/config.h index dd119d3b04..5fb9a90560 100644 --- a/keyboards/tgr/jane/config.h +++ b/keyboards/tgr/jane/config.h @@ -36,4 +36,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DIODE_DIRECTION COL2ROW #define DEBOUNCE 5 -#define BACKLIGHT_LEVELS 1 +#define BACKLIGHT_PIN D4 +#define BACKLIGHT_LEVELS 3 diff --git a/keyboards/tgr/jane/jane.c b/keyboards/tgr/jane/jane.c index 4ab0b30073..24183a0f7b 100644 --- a/keyboards/tgr/jane/jane.c +++ b/keyboards/tgr/jane/jane.c @@ -16,32 +16,22 @@ #include "jane.h" -void backlight_init_ports(void) { - // initialize pins D0, D1, D4 and D6 as output - setPinOutput(D0); +void keyboard_pre_init_kb(void) { + led_init_ports(); + keyboard_pre_init_user(); +} + +void led_init_ports(void) { setPinOutput(D1); - setPinOutput(D4); setPinOutput(D6); - - // turn backlight LEDs on - writePinHigh(D0); writePinHigh(D1); - writePinHigh(D4); writePinHigh(D6); } -void backlight_set(uint8_t level) { - if (level == 0) { - // turn backlight LEDs off - writePinLow(D0); - writePinLow(D1); - writePinLow(D4); - writePinLow(D6); - } else { - // turn backlight LEDs on - writePinHigh(D0); - writePinHigh(D1); - writePinHigh(D4); - writePinHigh(D6); +bool led_update_kb(led_t led_state) { + if (led_update_user(led_state)) { + writePin(D1, !led_state.caps_lock); + writePin(D6, !led_state.scroll_lock); } + return true; } diff --git a/keyboards/unikorn/config.h b/keyboards/unikorn/config.h index 1c4f3431a0..e6bdbe7f2f 100644 --- a/keyboards/unikorn/config.h +++ b/keyboards/unikorn/config.h @@ -36,7 +36,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DIODE_DIRECTION COL2ROW #define DEBOUNCE 5 -#define BACKLIGHT_LEVELS 1 +#define BACKLIGHT_PIN D4 +#define BACKLIGHT_LEVELS 3 + #ifdef RGBLIGHT_ENABLE #define RGBLED_NUM 17 #define RGBLIGHT_ANIMATIONS diff --git a/keyboards/unikorn/unikorn.c b/keyboards/unikorn/unikorn.c index 70bc5a988f..26a5092a59 100644 --- a/keyboards/unikorn/unikorn.c +++ b/keyboards/unikorn/unikorn.c @@ -16,32 +16,19 @@ #include "unikorn.h" -void backlight_init_ports(void) { - // initialize pins D0, D1, D4 and D6 as output - setPinOutput(D0); - setPinOutput(D1); - setPinOutput(D4); - setPinOutput(D6); +void keyboard_pre_init_kb(void) { + led_init_ports(); + keyboard_pre_init_user(); +} - // turn backlight LEDs on - writePinHigh(D0); +void led_init_ports(void) { + setPinOutput(D1); writePinHigh(D1); - writePinHigh(D4); - writePinHigh(D6); } -void backlight_set(uint8_t level) { - if (level == 0) { - // turn backlight LEDs off - writePinLow(D0); - writePinLow(D1); - writePinLow(D4); - writePinLow(D6); - } else { - // turn backlight LEDs on - writePinHigh(D0); - writePinHigh(D1); - writePinHigh(D4); - writePinHigh(D6); +bool led_update_kb(led_t led_state) { + if (led_update_user(led_state)) { + writePin(D1, !led_state.caps_lock); } + return true; } diff --git a/keyboards/winkeyless/bface/bface.c b/keyboards/winkeyless/bface/bface.c index 8cb5b600cd..49e8bbcd2d 100644 --- a/keyboards/winkeyless/bface/bface.c +++ b/keyboards/winkeyless/bface/bface.c @@ -16,32 +16,25 @@ #include "bface.h" -void backlight_init_ports(void) { - // initialize pins D0, D1, D4 and D6 as output +void keyboard_pre_init_kb(void) { + led_init_ports(); + keyboard_pre_init_user(); +} + +void led_init_ports(void) { setPinOutput(D0); setPinOutput(D1); - setPinOutput(D4); setPinOutput(D6); - - // turn backlight LEDs on writePinHigh(D0); writePinHigh(D1); - writePinHigh(D4); writePinHigh(D6); } -void backlight_set(uint8_t level) { - if (level == 0) { - // turn backlight LEDs off - writePinLow(D0); - writePinLow(D1); - writePinLow(D4); - writePinLow(D6); - } else { - // turn backlight LEDs on - writePinHigh(D0); - writePinHigh(D1); - writePinHigh(D4); - writePinHigh(D6); +bool led_update_kb(led_t led_state) { + if (led_update_user(led_state)) { + writePin(D0, !led_state.num_lock); + writePin(D1, !led_state.caps_lock); + writePin(D6, !led_state.scroll_lock); } + return true; } diff --git a/keyboards/winkeyless/bface/config.h b/keyboards/winkeyless/bface/config.h index 95d44557a5..7ada9a49ac 100644 --- a/keyboards/winkeyless/bface/config.h +++ b/keyboards/winkeyless/bface/config.h @@ -42,10 +42,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define NO_UART 1 -#ifdef BACKLIGHT_ENABLE - // the backlight PWM does not work (yet). Therefore, we only have two backlight levels (on/off) - #define BACKLIGHT_LEVELS 1 - #define LED_PIN PORTD - #define BACKLIGHT_PORT_NUM (1 << 4) -#endif - +#define BACKLIGHT_PIN D4 +#define BACKLIGHT_LEVELS 3 diff --git a/keyboards/winkeyless/bface/rules.mk b/keyboards/winkeyless/bface/rules.mk index 506e37ac9c..84eace5ed6 100644 --- a/keyboards/winkeyless/bface/rules.mk +++ b/keyboards/winkeyless/bface/rules.mk @@ -18,8 +18,6 @@ EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = no COMMAND_ENABLE = yes BACKLIGHT_ENABLE = yes -BACKLIGHT_CUSTOM_DRIVER = yes -BACKLIGHT_BREATHING = no RGBLIGHT_ENABLE = yes WS2812_DRIVER = i2c diff --git a/keyboards/winkeyless/bmini/bmini.c b/keyboards/winkeyless/bmini/bmini.c index f44fd36a8c..fe3b74be13 100644 --- a/keyboards/winkeyless/bmini/bmini.c +++ b/keyboards/winkeyless/bmini/bmini.c @@ -16,3 +16,26 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include "bmini.h" + +void keyboard_pre_init_kb(void) { + led_init_ports(); + keyboard_pre_init_user(); +} + +void led_init_ports(void) { + setPinOutput(D0); + setPinOutput(D1); + setPinOutput(D6); + writePinHigh(D0); + writePinHigh(D1); + writePinHigh(D6); +} + +bool led_update_kb(led_t led_state) { + if (led_update_user(led_state)) { + writePin(D0, !led_state.num_lock); + writePin(D1, !led_state.caps_lock); + writePin(D6, !led_state.scroll_lock); + } + return true; +} diff --git a/keyboards/winkeyless/bmini/config.h b/keyboards/winkeyless/bmini/config.h index f8a26e4f00..95c44be9a4 100644 --- a/keyboards/winkeyless/bmini/config.h +++ b/keyboards/winkeyless/bmini/config.h @@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifndef BMINI_CONFIG_H -#define BMINI_CONFIG_H +#pragma once #include "config_common.h" @@ -37,6 +36,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_ANIMATIONS -#define NO_UART 1 +#define BACKLIGHT_PIN D4 +#define BACKLIGHT_LEVELS 3 -#endif +#define NO_UART 1 diff --git a/keyboards/winkeyless/bmini/rules.mk b/keyboards/winkeyless/bmini/rules.mk index 530e8ea329..a8fea7efa7 100644 --- a/keyboards/winkeyless/bmini/rules.mk +++ b/keyboards/winkeyless/bmini/rules.mk @@ -17,7 +17,7 @@ MOUSEKEY_ENABLE = no EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = yes COMMAND_ENABLE = yes -BACKLIGHT_ENABLE = no +BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = yes WS2812_DRIVER = i2c diff --git a/keyboards/winkeyless/bminiex/backlight.c b/keyboards/winkeyless/bminiex/backlight.c deleted file mode 100644 index 94e8126d88..0000000000 --- a/keyboards/winkeyless/bminiex/backlight.c +++ /dev/null @@ -1,211 +0,0 @@ -/** - * Backlighting code for PS2AVRGB boards (ATMEGA32A) - * Kenneth A. (github.com/krusli | krusli.me) - */ - -#include "backlight.h" -#include "quantum.h" - -#include <avr/pgmspace.h> -#include <avr/interrupt.h> - -#include "backlight_custom.h" -#include "breathing_custom.h" - -// DEBUG -#include <stdlib.h> -#include <stdio.h> - -// Port D: digital pins of the AVR chipset -#define NUMLOCK_PORT (1 << 0) // D0 -#define CAPSLOCK_PORT (1 << 1) // D1 -#define BACKLIGHT_PORT (1 << 4) // D4 -#define SCROLLLOCK_PORT (1 << 6) // D6 - -#define TIMER_CLK_DIV64 0x03 ///< Timer clocked at F_CPU/64 -#define TIMER1PRESCALE TIMER_CLK_DIV64 ///< timer 1 prescaler default - -#define TIMER_PRESCALE_MASK 0x07 ///< Timer Prescaler Bit-Mask - -#define PWM_MAX 0xFF -#define TIMER_TOP 255 // 8 bit PWM - -extern backlight_config_t backlight_config; - -/** - * References - * Port Registers: https://www.arduino.cc/en/Reference/PortManipulation - * TCCR1A: https://electronics.stackexchange.com/questions/92350/what-is-the-difference-between-tccr1a-and-tccr1b - * Timers: http://www.avrbeginners.net/architecture/timers/timers.html - * 16-bit timer setup: http://sculland.com/ATmega168/Interrupts-And-Timers/16-Bit-Timer-Setup/ - * PS2AVRGB firmware: https://github.com/showjean/ps2avrU/tree/master/firmware - */ - -// @Override -// turn LEDs on and off depending on USB caps/num/scroll lock states. -__attribute__ ((weak)) -void led_set_user(uint8_t usb_led) { - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - // turn on - DDRD |= NUMLOCK_PORT; - PORTD |= NUMLOCK_PORT; - } else { - // turn off - DDRD &= ~NUMLOCK_PORT; - PORTD &= ~NUMLOCK_PORT; - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - DDRD |= CAPSLOCK_PORT; - PORTD |= CAPSLOCK_PORT; - } else { - DDRD &= ~CAPSLOCK_PORT; - PORTD &= ~CAPSLOCK_PORT; - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - DDRD |= SCROLLLOCK_PORT; - PORTD |= SCROLLLOCK_PORT; - } else { - DDRD &= ~SCROLLLOCK_PORT; - PORTD &= ~SCROLLLOCK_PORT; - } -} - -#ifdef BACKLIGHT_ENABLE - -// sets up Timer 1 for 8-bit PWM -void timer1PWMSetup(void) { // NOTE ONLY CALL THIS ONCE - // default 8 bit mode - TCCR1A &= ~(1 << 1); // cbi(TCCR1A,PWM11); <- set PWM11 bit to HIGH - TCCR1A |= (1 << 0); // sbi(TCCR1A,PWM10); <- set PWM10 bit to LOW - - // clear output compare value A - // outb(OCR1AH, 0); - // outb(OCR1AL, 0); - - // clear output comparator registers for B - OCR1BH = 0; // outb(OCR1BH, 0); - OCR1BL = 0; // outb(OCR1BL, 0); -} - -bool is_init = false; -void timer1Init(void) { - // timer1SetPrescaler(TIMER1PRESCALE) - // set to DIV/64 - (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | TIMER1PRESCALE; - - // reset TCNT1 - TCNT1H = 0; // outb(TCNT1H, 0); - TCNT1L = 0; // outb(TCNT1L, 0); - - // TOIE1: Timer Overflow Interrupt Enable (Timer 1); - TIMSK |= _BV(TOIE1); // sbi(TIMSK, TOIE1); - - is_init = true; -} - -void timer1UnInit(void) { - // set prescaler back to NONE - (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | 0x00; // TIMERRTC_CLK_STOP - - // disable timer overflow interrupt - TIMSK &= ~_BV(TOIE1); // overflow bit? - - setPWM(0); - - is_init = false; -} - - -// handle TCNT1 overflow -//! Interrupt handler for tcnt1 overflow interrupt -ISR(TIMER1_OVF_vect, ISR_NOBLOCK) -{ - // sei(); - // handle breathing here - #ifdef BACKLIGHT_BREATHING - if (is_breathing()) { - custom_breathing_handler(); - } - #endif -} - -// enable timer 1 PWM -// timer1PWMBOn() -void timer1PWMBEnable(void) { - // turn on channel B (OC1B) PWM output - // set OC1B as non-inverted PWM - TCCR1A |= _BV(COM1B1); - TCCR1A &= ~_BV(COM1B0); -} - -// disable timer 1 PWM -// timer1PWMBOff() -void timer1PWMBDisable(void) { - TCCR1A &= ~_BV(COM1B1); - TCCR1A &= ~_BV(COM1B0); -} - -void enableBacklight(void) { - DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output - PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high -} - -void disableBacklight(void) { - // DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input - PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low -} - -void startPWM(void) { - timer1Init(); - timer1PWMBEnable(); - enableBacklight(); -} - -void stopPWM(void) { - timer1UnInit(); - disableBacklight(); - timer1PWMBDisable(); -} - -void b_led_init_ports(void) { - /* turn backlight on/off depending on user preference */ - #if BACKLIGHT_ON_STATE == 0 - // DDRx register: sets the direction of Port D - // DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input - PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low - #else - DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output - PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high - #endif - - timer1PWMSetup(); - startPWM(); - - #ifdef BACKLIGHT_BREATHING - breathing_enable(); - #endif -} - -void b_led_set(uint8_t level) { - if (level > BACKLIGHT_LEVELS) { - level = BACKLIGHT_LEVELS; - } - - setPWM((int)(TIMER_TOP * (float) level / BACKLIGHT_LEVELS)); -} - -// called every matrix scan -void b_led_task(void) { - // do nothing for now -} - -void setPWM(uint16_t xValue) { - if (xValue > TIMER_TOP) { - xValue = TIMER_TOP; - } - OCR1B = xValue; // timer1PWMBSet(xValue); -} - -#endif // BACKLIGHT_ENABLE diff --git a/keyboards/winkeyless/bminiex/backlight_custom.h b/keyboards/winkeyless/bminiex/backlight_custom.h deleted file mode 100644 index 51365fe3ba..0000000000 --- a/keyboards/winkeyless/bminiex/backlight_custom.h +++ /dev/null @@ -1,13 +0,0 @@ -/** - * Backlighting code for PS2AVRGB boards (ATMEGA32A) - * Kenneth A. (github.com/krusli | krusli.me) - */ - -#pragma once - -#include <avr/pgmspace.h> -void b_led_init_ports(void); -void b_led_set(uint8_t level); -void b_led_task(void); -void setPWM(uint16_t xValue); - diff --git a/keyboards/winkeyless/bminiex/bminiex.c b/keyboards/winkeyless/bminiex/bminiex.c index 11315b9210..365aeee2b2 100644 --- a/keyboards/winkeyless/bminiex/bminiex.c +++ b/keyboards/winkeyless/bminiex/bminiex.c @@ -17,20 +17,25 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "bminiex.h" -#include "backlight.h" -#include "backlight_custom.h" - -#ifdef BACKLIGHT_ENABLE -/// Overrides functions in `quantum.c` -void backlight_init_ports(void) { - b_led_init_ports(); +void keyboard_pre_init_kb(void) { + led_init_ports(); + keyboard_pre_init_user(); } -void backlight_task(void) { - b_led_task(); +void led_init_ports(void) { + setPinOutput(D0); + setPinOutput(D1); + setPinOutput(D6); + writePinHigh(D0); + writePinHigh(D1); + writePinHigh(D6); } -void backlight_set(uint8_t level) { - b_led_set(level); +bool led_update_kb(led_t led_state) { + if (led_update_user(led_state)) { + writePin(D0, !led_state.num_lock); + writePin(D1, !led_state.caps_lock); + writePin(D6, !led_state.scroll_lock); + } + return true; } -#endif diff --git a/keyboards/winkeyless/bminiex/breathing_custom.h b/keyboards/winkeyless/bminiex/breathing_custom.h deleted file mode 100644 index 71416b1b45..0000000000 --- a/keyboards/winkeyless/bminiex/breathing_custom.h +++ /dev/null @@ -1,140 +0,0 @@ -/** - * Breathing effect code for PS2AVRGB boards (ATMEGA32A) - * Works in conjunction with `backlight.c`. - * - * Code adapted from `quantum.c` to register with the existing TIMER1 overflow - * handler in `backlight.c` instead of setting up its own timer. - * Kenneth A. (github.com/krusli | krusli.me) - */ - -#ifdef BACKLIGHT_ENABLE -#ifdef BACKLIGHT_BREATHING - -#include "backlight_custom.h" - -#ifndef BREATHING_PERIOD -#define BREATHING_PERIOD 6 -#endif - -#define breathing_min() do {breathing_counter = 0;} while (0) -#define breathing_max() do {breathing_counter = breathing_period * 244 / 2;} while (0) - -// TODO make this share code with quantum.c - -#define BREATHING_NO_HALT 0 -#define BREATHING_HALT_OFF 1 -#define BREATHING_HALT_ON 2 -#define BREATHING_STEPS 128 - -static uint8_t breathing_period = BREATHING_PERIOD; -static uint8_t breathing_halt = BREATHING_NO_HALT; -static uint16_t breathing_counter = 0; - -static bool breathing = false; - -bool is_breathing(void) { - return breathing; -} - -// See http://jared.geek.nz/2013/feb/linear-led-pwm -static uint16_t cie_lightness(uint16_t v) { - if (v <= 5243) // if below 8% of max - return v / 9; // same as dividing by 900% - else { - uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare - // to get a useful result with integer division, we shift left in the expression above - // and revert what we've done again after squaring. - y = y * y * y >> 8; - if (y > 0xFFFFUL) // prevent overflow - return 0xFFFFU; - else - return (uint16_t) y; - } -} - -void breathing_enable(void) { - breathing = true; - breathing_counter = 0; - breathing_halt = BREATHING_NO_HALT; - // interrupt already registered -} - -void breathing_pulse(void) { - if (get_backlight_level() == 0) - breathing_min(); - else - breathing_max(); - breathing_halt = BREATHING_HALT_ON; - // breathing_interrupt_enable(); - breathing = true; -} - -void breathing_disable(void) { - breathing = false; - // backlight_set(get_backlight_level()); - b_led_set(get_backlight_level()); // custom implementation of backlight_set() -} - -void breathing_self_disable(void) -{ - if (get_backlight_level() == 0) - breathing_halt = BREATHING_HALT_OFF; - else - breathing_halt = BREATHING_HALT_ON; -} - -void breathing_toggle(void) { - if (is_breathing()) - breathing_disable(); - else - breathing_enable(); -} - -void breathing_period_set(uint8_t value) -{ - if (!value) - value = 1; - breathing_period = value; -} - -void breathing_period_default(void) { - breathing_period_set(BREATHING_PERIOD); -} - -void breathing_period_inc(void) -{ - breathing_period_set(breathing_period+1); -} - -void breathing_period_dec(void) -{ - breathing_period_set(breathing_period-1); -} - -/* To generate breathing curve in python: - * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)] - */ -static const uint8_t breathing_table[BREATHING_STEPS] PROGMEM = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; - -// Use this before the cie_lightness function. -static inline uint16_t scale_backlight(uint16_t v) { - return v / BACKLIGHT_LEVELS * get_backlight_level(); -} - -void custom_breathing_handler(void) { - uint16_t interval = (uint16_t) breathing_period * 244 / BREATHING_STEPS; - // resetting after one period to prevent ugly reset at overflow. - breathing_counter = (breathing_counter + 1) % (breathing_period * 244); - uint8_t index = breathing_counter / interval % BREATHING_STEPS; - - if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) || - ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1))) - { - // breathing_interrupt_disable(); - } - - setPWM(cie_lightness(scale_backlight((uint16_t) pgm_read_byte(&breathing_table[index]) * 0x0101U))); -} - -#endif // BACKLIGHT_BREATHING -#endif // BACKLIGHT_ENABLE diff --git a/keyboards/winkeyless/bminiex/config.h b/keyboards/winkeyless/bminiex/config.h index 037ca00284..8952796a81 100644 --- a/keyboards/winkeyless/bminiex/config.h +++ b/keyboards/winkeyless/bminiex/config.h @@ -36,6 +36,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_ANIMATIONS +#define BACKLIGHT_PIN D4 #define BACKLIGHT_LEVELS 5 #define NO_UART 1 diff --git a/keyboards/winkeyless/bminiex/rules.mk b/keyboards/winkeyless/bminiex/rules.mk index 2c999dcbf6..df7124400f 100644 --- a/keyboards/winkeyless/bminiex/rules.mk +++ b/keyboards/winkeyless/bminiex/rules.mk @@ -19,7 +19,6 @@ CONSOLE_ENABLE = no DEBUG_ENABLE = no COMMAND_ENABLE = no BACKLIGHT_ENABLE = yes -BACKLIGHT_CUSTOM_DRIVER = yes RGBLIGHT_ENABLE = yes WS2812_DRIVER = i2c TAP_DANCE_ENABLE = no @@ -28,5 +27,3 @@ TAP_DANCE_ENABLE = no SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend OPT_DEFS = -DDEBUG_LEVEL=0 - -SRC += backlight.c diff --git a/keyboards/ymd75/backlight.c b/keyboards/ymd75/backlight.c deleted file mode 100644 index cb0a979234..0000000000 --- a/keyboards/ymd75/backlight.c +++ /dev/null @@ -1,216 +0,0 @@ -/** - * Backlighting code for PS2AVRGB boards (ATMEGA32A) - * Kenneth A. (github.com/krusli | krusli.me) - Modified by Wayne K Jones (github.com/WarmCatUK) 2018 - */ - -#include "backlight.h" -#include "quantum.h" - -#include <avr/pgmspace.h> -#include <avr/interrupt.h> - -#include "backlight_custom.h" -#include "breathing_custom.h" - -// DEBUG -#include <stdlib.h> -#include <stdio.h> - -// Port D: digital pins of the AVR chipset -//#define NUMLOCK_PORT (1 << 2) // 2nd pin of Port D (digital) -#define CAPSLOCK_PORT (1 << 1) // 1st pin -#define BACKLIGHT_PORT (1 << 4) // D4 -//#define SCROLLLOCK_PORT (1 << 6) // D6 - -#define TIMER_CLK_DIV64 0x03 ///< Timer clocked at F_CPU/64 -#define TIMER1PRESCALE TIMER_CLK_DIV64 ///< timer 1 prescaler default - -#define TIMER_PRESCALE_MASK 0x07 ///< Timer Prescaler Bit-Mask - -#define PWM_MAX 0xFF -#define TIMER_TOP 255 // 8 bit PWM - -extern backlight_config_t backlight_config; - -/** - * References - * Port Registers: https://www.arduino.cc/en/Reference/PortManipulation - * TCCR1A: https://electronics.stackexchange.com/questions/92350/what-is-the-difference-between-tccr1a-and-tccr1b - * Timers: http://www.avrbeginners.net/architecture/timers/timers.html - * 16-bit timer setup: http://sculland.com/ATmega168/Interrupts-And-Timers/16-Bit-Timer-Setup/ - * PS2AVRGB firmware: https://github.com/showjean/ps2avrU/tree/master/firmware - */ - -// @Override -// turn LEDs on and off depending on USB caps/num/scroll lock states. -__attribute__ ((weak)) -void led_set_user(uint8_t usb_led) { - /* - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - // turn on - DDRD |= NUMLOCK_PORT; - PORTD |= NUMLOCK_PORT; - } else { - // turn off - DDRD &= ~NUMLOCK_PORT; - PORTD &= ~NUMLOCK_PORT; - } - */ - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - DDRD |= CAPSLOCK_PORT; - PORTD |= CAPSLOCK_PORT; - } else { - DDRD &= ~CAPSLOCK_PORT; - PORTD &= ~CAPSLOCK_PORT; - } - /* - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - DDRD |= SCROLLLOCK_PORT; - PORTD |= SCROLLLOCK_PORT; - } else { - DDRD &= ~SCROLLLOCK_PORT; - PORTD &= ~SCROLLLOCK_PORT; - } - */ -} - -#ifdef BACKLIGHT_ENABLE - -// sets up Timer 1 for 8-bit PWM -void timer1PWMSetup(void) { // NOTE ONLY CALL THIS ONCE - // default 8 bit mode - TCCR1A &= ~(1 << 1); // cbi(TCCR1A,PWM11); <- set PWM11 bit to HIGH - TCCR1A |= (1 << 0); // sbi(TCCR1A,PWM10); <- set PWM10 bit to LOW - - // clear output compare value A - // outb(OCR1AH, 0); - // outb(OCR1AL, 0); - - // clear output comparator registers for B - OCR1BH = 0; // outb(OCR1BH, 0); - OCR1BL = 0; // outb(OCR1BL, 0); -} - -bool is_init = false; -void timer1Init(void) { - // timer1SetPrescaler(TIMER1PRESCALE) - // set to DIV/64 - (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | TIMER1PRESCALE; - - // reset TCNT1 - TCNT1H = 0; // outb(TCNT1H, 0); - TCNT1L = 0; // outb(TCNT1L, 0); - - // TOIE1: Timer Overflow Interrupt Enable (Timer 1); - TIMSK |= _BV(TOIE1); // sbi(TIMSK, TOIE1); - - is_init = true; -} - -void timer1UnInit(void) { - // set prescaler back to NONE - (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | 0x00; // TIMERRTC_CLK_STOP - - // disable timer overflow interrupt - TIMSK &= ~_BV(TOIE1); // overflow bit? - - setPWM(0); - - is_init = false; -} - - -// handle TCNT1 overflow -//! Interrupt handler for tcnt1 overflow interrupt -ISR(TIMER1_OVF_vect, ISR_NOBLOCK) -{ - // sei(); - // handle breathing here - #ifdef BACKLIGHT_BREATHING - if (is_breathing()) { - custom_breathing_handler(); - } - #endif - - // TODO call user defined function -} - -// enable timer 1 PWM -// timer1PWMBOn() -void timer1PWMBEnable(void) { - // turn on channel B (OC1B) PWM output - // set OC1B as non-inverted PWM - TCCR1A |= _BV(COM1B1); - TCCR1A &= ~_BV(COM1B0); -} - -// disable timer 1 PWM -// timer1PWMBOff() -void timer1PWMBDisable(void) { - TCCR1A &= ~_BV(COM1B1); - TCCR1A &= ~_BV(COM1B0); -} - -void enableBacklight(void) { - DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output - PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high -} - -void disableBacklight(void) { - // DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input - PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low -} - -void startPWM(void) { - timer1Init(); - timer1PWMBEnable(); - enableBacklight(); -} - -void stopPWM(void) { - timer1UnInit(); - disableBacklight(); - timer1PWMBDisable(); -} - -void b_led_init_ports(void) { - /* turn backlight on/off depending on user preference */ - #if BACKLIGHT_ON_STATE == 0 - // DDRx register: sets the direction of Port D - // DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input - PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low - #else - DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output - PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high - #endif - - timer1PWMSetup(); - startPWM(); - - #ifdef BACKLIGHT_BREATHING - breathing_enable(); - #endif -} - -void b_led_set(uint8_t level) { - if (level > BACKLIGHT_LEVELS) { - level = BACKLIGHT_LEVELS; - } - - setPWM((int)(TIMER_TOP * (float) level / BACKLIGHT_LEVELS)); -} - -// called every matrix scan -void b_led_task(void) { - // do nothing for now -} - -void setPWM(uint16_t xValue) { - if (xValue > TIMER_TOP) { - xValue = TIMER_TOP; - } - OCR1B = xValue; // timer1PWMBSet(xValue); -} - -#endif // BACKLIGHT_ENABLE diff --git a/keyboards/ymd75/backlight_custom.h b/keyboards/ymd75/backlight_custom.h deleted file mode 100644 index 7210be840e..0000000000 --- a/keyboards/ymd75/backlight_custom.h +++ /dev/null @@ -1,15 +0,0 @@ -/** - * Backlighting code for PS2AVRGB boards (ATMEGA32A) - * Kenneth A. (github.com/krusli | krusli.me) - */ - -#ifndef BACKLIGHT_CUSTOM_H -#define BACKLIGHT_CUSTOM_H - -#include <avr/pgmspace.h> -void b_led_init_ports(void); -void b_led_set(uint8_t level); -void b_led_task(void); -void setPWM(uint16_t xValue); - -#endif // BACKLIGHT_CUSTOM_H diff --git a/keyboards/ymd75/breathing_custom.h b/keyboards/ymd75/breathing_custom.h deleted file mode 100644 index 71416b1b45..0000000000 --- a/keyboards/ymd75/breathing_custom.h +++ /dev/null @@ -1,140 +0,0 @@ -/** - * Breathing effect code for PS2AVRGB boards (ATMEGA32A) - * Works in conjunction with `backlight.c`. - * - * Code adapted from `quantum.c` to register with the existing TIMER1 overflow - * handler in `backlight.c` instead of setting up its own timer. - * Kenneth A. (github.com/krusli | krusli.me) - */ - -#ifdef BACKLIGHT_ENABLE -#ifdef BACKLIGHT_BREATHING - -#include "backlight_custom.h" - -#ifndef BREATHING_PERIOD -#define BREATHING_PERIOD 6 -#endif - -#define breathing_min() do {breathing_counter = 0;} while (0) -#define breathing_max() do {breathing_counter = breathing_period * 244 / 2;} while (0) - -// TODO make this share code with quantum.c - -#define BREATHING_NO_HALT 0 -#define BREATHING_HALT_OFF 1 -#define BREATHING_HALT_ON 2 -#define BREATHING_STEPS 128 - -static uint8_t breathing_period = BREATHING_PERIOD; -static uint8_t breathing_halt = BREATHING_NO_HALT; -static uint16_t breathing_counter = 0; - -static bool breathing = false; - -bool is_breathing(void) { - return breathing; -} - -// See http://jared.geek.nz/2013/feb/linear-led-pwm -static uint16_t cie_lightness(uint16_t v) { - if (v <= 5243) // if below 8% of max - return v / 9; // same as dividing by 900% - else { - uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare - // to get a useful result with integer division, we shift left in the expression above - // and revert what we've done again after squaring. - y = y * y * y >> 8; - if (y > 0xFFFFUL) // prevent overflow - return 0xFFFFU; - else - return (uint16_t) y; - } -} - -void breathing_enable(void) { - breathing = true; - breathing_counter = 0; - breathing_halt = BREATHING_NO_HALT; - // interrupt already registered -} - -void breathing_pulse(void) { - if (get_backlight_level() == 0) - breathing_min(); - else - breathing_max(); - breathing_halt = BREATHING_HALT_ON; - // breathing_interrupt_enable(); - breathing = true; -} - -void breathing_disable(void) { - breathing = false; - // backlight_set(get_backlight_level()); - b_led_set(get_backlight_level()); // custom implementation of backlight_set() -} - -void breathing_self_disable(void) -{ - if (get_backlight_level() == 0) - breathing_halt = BREATHING_HALT_OFF; - else - breathing_halt = BREATHING_HALT_ON; -} - -void breathing_toggle(void) { - if (is_breathing()) - breathing_disable(); - else - breathing_enable(); -} - -void breathing_period_set(uint8_t value) -{ - if (!value) - value = 1; - breathing_period = value; -} - -void breathing_period_default(void) { - breathing_period_set(BREATHING_PERIOD); -} - -void breathing_period_inc(void) -{ - breathing_period_set(breathing_period+1); -} - -void breathing_period_dec(void) -{ - breathing_period_set(breathing_period-1); -} - -/* To generate breathing curve in python: - * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)] - */ -static const uint8_t breathing_table[BREATHING_STEPS] PROGMEM = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; - -// Use this before the cie_lightness function. -static inline uint16_t scale_backlight(uint16_t v) { - return v / BACKLIGHT_LEVELS * get_backlight_level(); -} - -void custom_breathing_handler(void) { - uint16_t interval = (uint16_t) breathing_period * 244 / BREATHING_STEPS; - // resetting after one period to prevent ugly reset at overflow. - breathing_counter = (breathing_counter + 1) % (breathing_period * 244); - uint8_t index = breathing_counter / interval % BREATHING_STEPS; - - if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) || - ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1))) - { - // breathing_interrupt_disable(); - } - - setPWM(cie_lightness(scale_backlight((uint16_t) pgm_read_byte(&breathing_table[index]) * 0x0101U))); -} - -#endif // BACKLIGHT_BREATHING -#endif // BACKLIGHT_ENABLE diff --git a/keyboards/ymd75/config.h b/keyboards/ymd75/config.h index 00f6bd292c..88916be62f 100644 --- a/keyboards/ymd75/config.h +++ b/keyboards/ymd75/config.h @@ -17,8 +17,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once #include "config_common.h" @@ -39,6 +38,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7 } #define DIODE_DIRECTION COL2ROW +#define BACKLIGHT_PIN D4 #define BACKLIGHT_LEVELS 12 #define RGB_DI_PIN E2 @@ -49,5 +49,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_VAL_STEP 18 #define NO_UART 1 - -#endif diff --git a/keyboards/ymd75/rules.mk b/keyboards/ymd75/rules.mk index eb41e19cf3..9d584b2b41 100644 --- a/keyboards/ymd75/rules.mk +++ b/keyboards/ymd75/rules.mk @@ -23,14 +23,8 @@ WS2812_DRIVER = i2c NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work - DISABLE_WS2812 = no KEY_LOCK_ENABLE = yes # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - - -#OPT_DEFS = -DDEBUG_LEVEL=0 - -SRC = backlight.c diff --git a/keyboards/ymd75/ymd75.c b/keyboards/ymd75/ymd75.c index e32a745bfd..1c5c380390 100644 --- a/keyboards/ymd75/ymd75.c +++ b/keyboards/ymd75/ymd75.c @@ -17,20 +17,19 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "ymd75.h" -#include "backlight.h" -#include "backlight_custom.h" - -#ifdef BACKLIGHT_ENABLE -/// Overrides functions in `quantum.c` -void backlight_init_ports(void) { - b_led_init_ports(); +void keyboard_pre_init_kb(void) { + led_init_ports(); + keyboard_pre_init_user(); } -void backlight_task(void) { - b_led_task(); +void led_init_ports(void) { + setPinOutput(D1); + writePinHigh(D1); } -void backlight_set(uint8_t level) { - b_led_set(level); +bool led_update_kb(led_t led_state) { + if (led_update_user(led_state)) { + writePin(D1, !led_state.caps_lock); + } + return true; } -#endif diff --git a/keyboards/ymd96/backlight.c b/keyboards/ymd96/backlight.c deleted file mode 100644 index f3f2b7a05b..0000000000 --- a/keyboards/ymd96/backlight.c +++ /dev/null @@ -1,214 +0,0 @@ -/** - * Backlighting code for PS2AVRGB boards (ATMEGA32A) - * Kenneth A. (github.com/krusli | krusli.me) - */ - -#include "backlight.h" -#include "quantum.h" - -#include <avr/pgmspace.h> -#include <avr/interrupt.h> - -#include "backlight_custom.h" -#include "breathing_custom.h" - -// DEBUG -#include <stdlib.h> -#include <stdio.h> - -// Port D: digital pins of the AVR chipset -#define NUMLOCK_PORT (1 << 0) // 0th pin of Port D (digital) -#define CAPSLOCK_PORT (1 << 1) // 1st pin -#define BACKLIGHT_PORT (1 << 4) // D4 -//#define SCROLLLOCK_PORT (1 << 6) // D6 - -#define TIMER_CLK_DIV64 0x03 ///< Timer clocked at F_CPU/64 -#define TIMER1PRESCALE TIMER_CLK_DIV64 ///< timer 1 prescaler default - -#define TIMER_PRESCALE_MASK 0x07 ///< Timer Prescaler Bit-Mask - -#define PWM_MAX 0xFF -#define TIMER_TOP 255 // 8 bit PWM - -extern backlight_config_t backlight_config; - -/** - * References - * Port Registers: https://www.arduino.cc/en/Reference/PortManipulation - * TCCR1A: https://electronics.stackexchange.com/questions/92350/what-is-the-difference-between-tccr1a-and-tccr1b - * Timers: http://www.avrbeginners.net/architecture/timers/timers.html - * 16-bit timer setup: http://sculland.com/ATmega168/Interrupts-And-Timers/16-Bit-Timer-Setup/ - * PS2AVRGB firmware: https://github.com/showjean/ps2avrU/tree/master/firmware - */ - -// @Override -// turn LEDs on and off depending on USB caps/num/scroll lock states. -__attribute__ ((weak)) -void led_set_user(uint8_t usb_led) { - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - // turn on - DDRD |= NUMLOCK_PORT; - PORTD |= NUMLOCK_PORT; - } else { - // turn off - DDRD &= ~NUMLOCK_PORT; - PORTD &= ~NUMLOCK_PORT; - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - DDRD |= CAPSLOCK_PORT; - PORTD |= CAPSLOCK_PORT; - } else { - DDRD &= ~CAPSLOCK_PORT; - PORTD &= ~CAPSLOCK_PORT; - } - - /* YMD96 does not have scroll lock led - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - DDRD |= SCROLLLOCK_PORT; - PORTD |= SCROLLLOCK_PORT; - } else { - DDRD &= ~SCROLLLOCK_PORT; - PORTD &= ~SCROLLLOCK_PORT; - }*/ -} - -#ifdef BACKLIGHT_ENABLE - -// sets up Timer 1 for 8-bit PWM -void timer1PWMSetup(void) { // NOTE ONLY CALL THIS ONCE - // default 8 bit mode - TCCR1A &= ~(1 << 1); // cbi(TCCR1A,PWM11); <- set PWM11 bit to HIGH - TCCR1A |= (1 << 0); // sbi(TCCR1A,PWM10); <- set PWM10 bit to LOW - - // clear output compare value A - // outb(OCR1AH, 0); - // outb(OCR1AL, 0); - - // clear output comparator registers for B - OCR1BH = 0; // outb(OCR1BH, 0); - OCR1BL = 0; // outb(OCR1BL, 0); -} - -bool is_init = false; -void timer1Init(void) { - // timer1SetPrescaler(TIMER1PRESCALE) - // set to DIV/64 - (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | TIMER1PRESCALE; - - // reset TCNT1 - TCNT1H = 0; // outb(TCNT1H, 0); - TCNT1L = 0; // outb(TCNT1L, 0); - - // TOIE1: Timer Overflow Interrupt Enable (Timer 1); - TIMSK |= _BV(TOIE1); // sbi(TIMSK, TOIE1); - - is_init = true; -} - -void timer1UnInit(void) { - // set prescaler back to NONE - (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | 0x00; // TIMERRTC_CLK_STOP - - // disable timer overflow interrupt - TIMSK &= ~_BV(TOIE1); // overflow bit? - - setPWM(0); - - is_init = false; -} - - -// handle TCNT1 overflow -//! Interrupt handler for tcnt1 overflow interrupt -ISR(TIMER1_OVF_vect, ISR_NOBLOCK) -{ - // sei(); - // handle breathing here - #ifdef BACKLIGHT_BREATHING - if (is_breathing()) { - custom_breathing_handler(); - } - #endif - - // TODO call user defined function -} - -// enable timer 1 PWM -// timer1PWMBOn() -void timer1PWMBEnable(void) { - // turn on channel B (OC1B) PWM output - // set OC1B as non-inverted PWM - TCCR1A |= _BV(COM1B1); - TCCR1A &= ~_BV(COM1B0); -} - -// disable timer 1 PWM -// timer1PWMBOff() -void timer1PWMBDisable(void) { - TCCR1A &= ~_BV(COM1B1); - TCCR1A &= ~_BV(COM1B0); -} - -void enableBacklight(void) { - DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output - PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high -} - -void disableBacklight(void) { - // DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input - PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low -} - -void startPWM(void) { - timer1Init(); - timer1PWMBEnable(); - enableBacklight(); -} - -void stopPWM(void) { - timer1UnInit(); - disableBacklight(); - timer1PWMBDisable(); -} - -void b_led_init_ports(void) { - /* turn backlight on/off depending on user preference */ - #if BACKLIGHT_ON_STATE == 0 - // DDRx register: sets the direction of Port D - // DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input - PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low - #else - DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output - PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high - #endif - - timer1PWMSetup(); - startPWM(); - - #ifdef BACKLIGHT_BREATHING - breathing_enable(); - #endif -} - -void b_led_set(uint8_t level) { - if (level > BACKLIGHT_LEVELS) { - level = BACKLIGHT_LEVELS; - } - - setPWM((int)(TIMER_TOP * (float) level / BACKLIGHT_LEVELS)); -} - -// called every matrix scan -void b_led_task(void) { - // do nothing for now -} - -void setPWM(uint16_t xValue) { - if (xValue > TIMER_TOP) { - xValue = TIMER_TOP; - } - OCR1B = xValue; // timer1PWMBSet(xValue); -} - -#endif // BACKLIGHT_ENABLE diff --git a/keyboards/ymd96/backlight_custom.h b/keyboards/ymd96/backlight_custom.h deleted file mode 100644 index 7210be840e..0000000000 --- a/keyboards/ymd96/backlight_custom.h +++ /dev/null @@ -1,15 +0,0 @@ -/** - * Backlighting code for PS2AVRGB boards (ATMEGA32A) - * Kenneth A. (github.com/krusli | krusli.me) - */ - -#ifndef BACKLIGHT_CUSTOM_H -#define BACKLIGHT_CUSTOM_H - -#include <avr/pgmspace.h> -void b_led_init_ports(void); -void b_led_set(uint8_t level); -void b_led_task(void); -void setPWM(uint16_t xValue); - -#endif // BACKLIGHT_CUSTOM_H diff --git a/keyboards/ymd96/breathing_custom.h b/keyboards/ymd96/breathing_custom.h deleted file mode 100644 index 71416b1b45..0000000000 --- a/keyboards/ymd96/breathing_custom.h +++ /dev/null @@ -1,140 +0,0 @@ -/** - * Breathing effect code for PS2AVRGB boards (ATMEGA32A) - * Works in conjunction with `backlight.c`. - * - * Code adapted from `quantum.c` to register with the existing TIMER1 overflow - * handler in `backlight.c` instead of setting up its own timer. - * Kenneth A. (github.com/krusli | krusli.me) - */ - -#ifdef BACKLIGHT_ENABLE -#ifdef BACKLIGHT_BREATHING - -#include "backlight_custom.h" - -#ifndef BREATHING_PERIOD -#define BREATHING_PERIOD 6 -#endif - -#define breathing_min() do {breathing_counter = 0;} while (0) -#define breathing_max() do {breathing_counter = breathing_period * 244 / 2;} while (0) - -// TODO make this share code with quantum.c - -#define BREATHING_NO_HALT 0 -#define BREATHING_HALT_OFF 1 -#define BREATHING_HALT_ON 2 -#define BREATHING_STEPS 128 - -static uint8_t breathing_period = BREATHING_PERIOD; -static uint8_t breathing_halt = BREATHING_NO_HALT; -static uint16_t breathing_counter = 0; - -static bool breathing = false; - -bool is_breathing(void) { - return breathing; -} - -// See http://jared.geek.nz/2013/feb/linear-led-pwm -static uint16_t cie_lightness(uint16_t v) { - if (v <= 5243) // if below 8% of max - return v / 9; // same as dividing by 900% - else { - uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare - // to get a useful result with integer division, we shift left in the expression above - // and revert what we've done again after squaring. - y = y * y * y >> 8; - if (y > 0xFFFFUL) // prevent overflow - return 0xFFFFU; - else - return (uint16_t) y; - } -} - -void breathing_enable(void) { - breathing = true; - breathing_counter = 0; - breathing_halt = BREATHING_NO_HALT; - // interrupt already registered -} - -void breathing_pulse(void) { - if (get_backlight_level() == 0) - breathing_min(); - else - breathing_max(); - breathing_halt = BREATHING_HALT_ON; - // breathing_interrupt_enable(); - breathing = true; -} - -void breathing_disable(void) { - breathing = false; - // backlight_set(get_backlight_level()); - b_led_set(get_backlight_level()); // custom implementation of backlight_set() -} - -void breathing_self_disable(void) -{ - if (get_backlight_level() == 0) - breathing_halt = BREATHING_HALT_OFF; - else - breathing_halt = BREATHING_HALT_ON; -} - -void breathing_toggle(void) { - if (is_breathing()) - breathing_disable(); - else - breathing_enable(); -} - -void breathing_period_set(uint8_t value) -{ - if (!value) - value = 1; - breathing_period = value; -} - -void breathing_period_default(void) { - breathing_period_set(BREATHING_PERIOD); -} - -void breathing_period_inc(void) -{ - breathing_period_set(breathing_period+1); -} - -void breathing_period_dec(void) -{ - breathing_period_set(breathing_period-1); -} - -/* To generate breathing curve in python: - * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)] - */ -static const uint8_t breathing_table[BREATHING_STEPS] PROGMEM = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; - -// Use this before the cie_lightness function. -static inline uint16_t scale_backlight(uint16_t v) { - return v / BACKLIGHT_LEVELS * get_backlight_level(); -} - -void custom_breathing_handler(void) { - uint16_t interval = (uint16_t) breathing_period * 244 / BREATHING_STEPS; - // resetting after one period to prevent ugly reset at overflow. - breathing_counter = (breathing_counter + 1) % (breathing_period * 244); - uint8_t index = breathing_counter / interval % BREATHING_STEPS; - - if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) || - ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1))) - { - // breathing_interrupt_disable(); - } - - setPWM(cie_lightness(scale_backlight((uint16_t) pgm_read_byte(&breathing_table[index]) * 0x0101U))); -} - -#endif // BACKLIGHT_BREATHING -#endif // BACKLIGHT_ENABLE diff --git a/keyboards/ymd96/config.h b/keyboards/ymd96/config.h index 1232f90c28..d761e60379 100644 --- a/keyboards/ymd96/config.h +++ b/keyboards/ymd96/config.h @@ -18,8 +18,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "config_common.h" -#ifndef CONFIG_H -#define CONFIG_H +#pragma once #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D @@ -38,8 +37,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW +#define BACKLIGHT_PIN D4 #define BACKLIGHT_LEVELS 12 -// #define BACKLIGHT_BREATHING // works, but BL_TOGG might not work +#define BACKLIGHT_BREATHING #define TAPPING_TOGGLE 3 @@ -55,5 +55,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /*#define RGBLIGHT_VAL_STEP 20 #define NO_UART 1*/ - -#endif diff --git a/keyboards/ymd96/rules.mk b/keyboards/ymd96/rules.mk index 3c892daabb..b7571649bd 100644 --- a/keyboards/ymd96/rules.mk +++ b/keyboards/ymd96/rules.mk @@ -19,7 +19,6 @@ CONSOLE_ENABLE = no COMMAND_ENABLE = no BACKLIGHT_ENABLE = yes -BACKLIGHT_CUSTOM_DRIVER = yes RGBLIGHT_ENABLE = yes WS2812_DRIVER = i2c @@ -30,5 +29,3 @@ KEY_LOCK_ENABLE = yes SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend OPT_DEFS = -DDEBUG_LEVEL=0 - -SRC = backlight.c diff --git a/keyboards/ymd96/ymd96.c b/keyboards/ymd96/ymd96.c index eae84ade19..c81435e45a 100644 --- a/keyboards/ymd96/ymd96.c +++ b/keyboards/ymd96/ymd96.c @@ -18,20 +18,22 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "ymd96.h" -#include "backlight.h" -#include "backlight_custom.h" - -#ifdef BACKLIGHT_ENABLE -/// Overrides functions in `quantum.c` -void backlight_init_ports(void) { - b_led_init_ports(); +void keyboard_pre_init_kb(void) { + led_init_ports(); + keyboard_pre_init_user(); } -void backlight_task(void) { - b_led_task(); +void led_init_ports(void) { + setPinOutput(D0); + setPinOutput(D1); + writePinHigh(D0); + writePinHigh(D1); } -void backlight_set(uint8_t level) { - b_led_set(level); +bool led_update_kb(led_t led_state) { + if (led_update_user(led_state)) { + writePin(D0, !led_state.num_lock); + writePin(D1, !led_state.caps_lock); + } + return true; } -#endif diff --git a/keyboards/ymdk/bface/bface.c b/keyboards/ymdk/bface/bface.c index 8622fd5238..e2810409a8 100644 --- a/keyboards/ymdk/bface/bface.c +++ b/keyboards/ymdk/bface/bface.c @@ -16,26 +16,19 @@ */ #include "quantum.h" +void keyboard_pre_init_kb(void) { + led_init_ports(); + keyboard_pre_init_user(); +} -void keyboard_pre_init_kb(void){ - //init the CAPS LOCK LED pin as an output +void led_init_ports(void) { setPinOutput(D1); - //init the Backlight Pin as an output - setPinOutput(D4); - //call any user initialization code - keyboard_pre_init_user(); + writePinHigh(D1); } -void led_set_kb(uint8_t usb_led){ - //control the caps lock LED - if(IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)){ - //set led pin to high - writePinHigh(D1); - } else { - //set to low - writePinLow(D1); +bool led_update_kb(led_t led_state) { + if (led_update_user(led_state)) { + writePin(D1, !led_state.caps_lock); } - //call any user LED functions - led_set_user(usb_led); + return true; } - diff --git a/keyboards/ymdk/bface/config.h b/keyboards/ymdk/bface/config.h index 2273b7e84e..a8c8a21493 100644 --- a/keyboards/ymdk/bface/config.h +++ b/keyboards/ymdk/bface/config.h @@ -40,5 +40,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define BACKLIGHT_PIN D4 #define BACKLIGHT_LEVELS 6 - - diff --git a/keyboards/ymdk/bface/rules.mk b/keyboards/ymdk/bface/rules.mk index f6f026cf30..6320071ab8 100644 --- a/keyboards/ymdk/bface/rules.mk +++ b/keyboards/ymdk/bface/rules.mk @@ -18,9 +18,6 @@ EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = no COMMAND_ENABLE = yes BACKLIGHT_ENABLE = yes -BACKLIGHT_CUSTOM_DRIVER = no -BACKLIGHT_BREATHING = no RGBLIGHT_ENABLE = no -RGBLIGHT_CUSTOM_DRIVER = no OPT_DEFS = -DDEBUG_LEVEL=0 diff --git a/keyboards/ymdk_np21/backlight.c b/keyboards/ymdk_np21/backlight.c deleted file mode 100644 index fbd241fa9d..0000000000 --- a/keyboards/ymdk_np21/backlight.c +++ /dev/null @@ -1,213 +0,0 @@ -/** - * Backlighting code for PS2AVRGB boards (ATMEGA32A) - * Kenneth A. (github.com/krusli | krusli.me) - */ - -#include "backlight.h" -#include "quantum.h" - -#include <avr/pgmspace.h> -#include <avr/interrupt.h> - -#include "backlight_custom.h" -#include "breathing_custom.h" - -// DEBUG -#include <stdlib.h> -#include <stdio.h> - -// Port D: digital pins of the AVR chipset -#define NUMLOCK_PORT (1 << 0) // D0 -#define CAPSLOCK_PORT (1 << 1) // D1 -#define BACKLIGHT_PORT (1 << 4) // D4 -#define SCROLLLOCK_PORT (1 << 6) // D6 - -#define TIMER_CLK_DIV64 0x03 ///< Timer clocked at F_CPU/64 -#define TIMER1PRESCALE TIMER_CLK_DIV64 ///< timer 1 prescaler default - -#define TIMER_PRESCALE_MASK 0x07 ///< Timer Prescaler Bit-Mask - -#define PWM_MAX 0xFF -#define TIMER_TOP 255 // 8 bit PWM - -extern backlight_config_t backlight_config; - -/** - * References - * Port Registers: https://www.arduino.cc/en/Reference/PortManipulation - * TCCR1A: https://electronics.stackexchange.com/questions/92350/what-is-the-difference-between-tccr1a-and-tccr1b - * Timers: http://www.avrbeginners.net/architecture/timers/timers.html - * 16-bit timer setup: http://sculland.com/ATmega168/Interrupts-And-Timers/16-Bit-Timer-Setup/ - * PS2AVRGB firmware: https://github.com/showjean/ps2avrU/tree/master/firmware - */ - -// @Override -// turn LEDs on and off depending on USB caps/num/scroll lock states. -__attribute__ ((weak)) -void led_set_user(uint8_t usb_led) { - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - // turn on - DDRD |= NUMLOCK_PORT; - PORTD |= NUMLOCK_PORT; - } else { - // turn off - DDRD &= ~NUMLOCK_PORT; - PORTD &= ~NUMLOCK_PORT; - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - DDRD |= CAPSLOCK_PORT; - PORTD |= CAPSLOCK_PORT; - } else { - DDRD &= ~CAPSLOCK_PORT; - PORTD &= ~CAPSLOCK_PORT; - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - DDRD |= SCROLLLOCK_PORT; - PORTD |= SCROLLLOCK_PORT; - } else { - DDRD &= ~SCROLLLOCK_PORT; - PORTD &= ~SCROLLLOCK_PORT; - } -} - -#ifdef BACKLIGHT_ENABLE - -// sets up Timer 1 for 8-bit PWM -void timer1PWMSetup(void) { // NOTE ONLY CALL THIS ONCE - // default 8 bit mode - TCCR1A &= ~(1 << 1); // cbi(TCCR1A,PWM11); <- set PWM11 bit to HIGH - TCCR1A |= (1 << 0); // sbi(TCCR1A,PWM10); <- set PWM10 bit to LOW - - // clear output compare value A - // outb(OCR1AH, 0); - // outb(OCR1AL, 0); - - // clear output comparator registers for B - OCR1BH = 0; // outb(OCR1BH, 0); - OCR1BL = 0; // outb(OCR1BL, 0); -} - -bool is_init = false; -void timer1Init(void) { - // timer1SetPrescaler(TIMER1PRESCALE) - // set to DIV/64 - (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | TIMER1PRESCALE; - - // reset TCNT1 - TCNT1H = 0; // outb(TCNT1H, 0); - TCNT1L = 0; // outb(TCNT1L, 0); - - // TOIE1: Timer Overflow Interrupt Enable (Timer 1); - TIMSK |= _BV(TOIE1); // sbi(TIMSK, TOIE1); - - is_init = true; -} - -void timer1UnInit(void) { - // set prescaler back to NONE - (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | 0x00; // TIMERRTC_CLK_STOP - - // disable timer overflow interrupt - TIMSK &= ~_BV(TOIE1); // overflow bit? - - setPWM(0); - - is_init = false; -} - - -// handle TCNT1 overflow -//! Interrupt handler for tcnt1 overflow interrupt -ISR(TIMER1_OVF_vect, ISR_NOBLOCK) -{ - // sei(); - // handle breathing here - #ifdef BACKLIGHT_BREATHING - if (is_breathing()) { - custom_breathing_handler(); - } - #endif - - // TODO call user defined function -} - -// enable timer 1 PWM -// timer1PWMBOn() -void timer1PWMBEnable(void) { - // turn on channel B (OC1B) PWM output - // set OC1B as non-inverted PWM - TCCR1A |= _BV(COM1B1); - TCCR1A &= ~_BV(COM1B0); -} - -// disable timer 1 PWM -// timer1PWMBOff() -void timer1PWMBDisable(void) { - TCCR1A &= ~_BV(COM1B1); - TCCR1A &= ~_BV(COM1B0); -} - -void enableBacklight(void) { - DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output - PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high -} - -void disableBacklight(void) { - // DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input - PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low -} - -void startPWM(void) { - timer1Init(); - timer1PWMBEnable(); - enableBacklight(); -} - -void stopPWM(void) { - timer1UnInit(); - disableBacklight(); - timer1PWMBDisable(); -} - -void b_led_init_ports(void) { - /* turn backlight on/off depending on user preference */ - #if BACKLIGHT_ON_STATE == 0 - // DDRx register: sets the direction of Port D - // DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input - PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low - #else - DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output - PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high - #endif - - timer1PWMSetup(); - startPWM(); - - #ifdef BACKLIGHT_BREATHING - breathing_enable(); - #endif -} - -void b_led_set(uint8_t level) { - if (level > BACKLIGHT_LEVELS) { - level = BACKLIGHT_LEVELS; - } - - setPWM((int)(TIMER_TOP * (float) level / BACKLIGHT_LEVELS)); -} - -// called every matrix scan -void b_led_task(void) { - // do nothing for now -} - -void setPWM(uint16_t xValue) { - if (xValue > TIMER_TOP) { - xValue = TIMER_TOP; - } - OCR1B = xValue; // timer1PWMBSet(xValue); -} - -#endif // BACKLIGHT_ENABLE diff --git a/keyboards/ymdk_np21/backlight_custom.h b/keyboards/ymdk_np21/backlight_custom.h deleted file mode 100644 index 7210be840e..0000000000 --- a/keyboards/ymdk_np21/backlight_custom.h +++ /dev/null @@ -1,15 +0,0 @@ -/** - * Backlighting code for PS2AVRGB boards (ATMEGA32A) - * Kenneth A. (github.com/krusli | krusli.me) - */ - -#ifndef BACKLIGHT_CUSTOM_H -#define BACKLIGHT_CUSTOM_H - -#include <avr/pgmspace.h> -void b_led_init_ports(void); -void b_led_set(uint8_t level); -void b_led_task(void); -void setPWM(uint16_t xValue); - -#endif // BACKLIGHT_CUSTOM_H diff --git a/keyboards/ymdk_np21/breathing_custom.h b/keyboards/ymdk_np21/breathing_custom.h deleted file mode 100644 index 71416b1b45..0000000000 --- a/keyboards/ymdk_np21/breathing_custom.h +++ /dev/null @@ -1,140 +0,0 @@ -/** - * Breathing effect code for PS2AVRGB boards (ATMEGA32A) - * Works in conjunction with `backlight.c`. - * - * Code adapted from `quantum.c` to register with the existing TIMER1 overflow - * handler in `backlight.c` instead of setting up its own timer. - * Kenneth A. (github.com/krusli | krusli.me) - */ - -#ifdef BACKLIGHT_ENABLE -#ifdef BACKLIGHT_BREATHING - -#include "backlight_custom.h" - -#ifndef BREATHING_PERIOD -#define BREATHING_PERIOD 6 -#endif - -#define breathing_min() do {breathing_counter = 0;} while (0) -#define breathing_max() do {breathing_counter = breathing_period * 244 / 2;} while (0) - -// TODO make this share code with quantum.c - -#define BREATHING_NO_HALT 0 -#define BREATHING_HALT_OFF 1 -#define BREATHING_HALT_ON 2 -#define BREATHING_STEPS 128 - -static uint8_t breathing_period = BREATHING_PERIOD; -static uint8_t breathing_halt = BREATHING_NO_HALT; -static uint16_t breathing_counter = 0; - -static bool breathing = false; - -bool is_breathing(void) { - return breathing; -} - -// See http://jared.geek.nz/2013/feb/linear-led-pwm -static uint16_t cie_lightness(uint16_t v) { - if (v <= 5243) // if below 8% of max - return v / 9; // same as dividing by 900% - else { - uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare - // to get a useful result with integer division, we shift left in the expression above - // and revert what we've done again after squaring. - y = y * y * y >> 8; - if (y > 0xFFFFUL) // prevent overflow - return 0xFFFFU; - else - return (uint16_t) y; - } -} - -void breathing_enable(void) { - breathing = true; - breathing_counter = 0; - breathing_halt = BREATHING_NO_HALT; - // interrupt already registered -} - -void breathing_pulse(void) { - if (get_backlight_level() == 0) - breathing_min(); - else - breathing_max(); - breathing_halt = BREATHING_HALT_ON; - // breathing_interrupt_enable(); - breathing = true; -} - -void breathing_disable(void) { - breathing = false; - // backlight_set(get_backlight_level()); - b_led_set(get_backlight_level()); // custom implementation of backlight_set() -} - -void breathing_self_disable(void) -{ - if (get_backlight_level() == 0) - breathing_halt = BREATHING_HALT_OFF; - else - breathing_halt = BREATHING_HALT_ON; -} - -void breathing_toggle(void) { - if (is_breathing()) - breathing_disable(); - else - breathing_enable(); -} - -void breathing_period_set(uint8_t value) -{ - if (!value) - value = 1; - breathing_period = value; -} - -void breathing_period_default(void) { - breathing_period_set(BREATHING_PERIOD); -} - -void breathing_period_inc(void) -{ - breathing_period_set(breathing_period+1); -} - -void breathing_period_dec(void) -{ - breathing_period_set(breathing_period-1); -} - -/* To generate breathing curve in python: - * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)] - */ -static const uint8_t breathing_table[BREATHING_STEPS] PROGMEM = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; - -// Use this before the cie_lightness function. -static inline uint16_t scale_backlight(uint16_t v) { - return v / BACKLIGHT_LEVELS * get_backlight_level(); -} - -void custom_breathing_handler(void) { - uint16_t interval = (uint16_t) breathing_period * 244 / BREATHING_STEPS; - // resetting after one period to prevent ugly reset at overflow. - breathing_counter = (breathing_counter + 1) % (breathing_period * 244); - uint8_t index = breathing_counter / interval % BREATHING_STEPS; - - if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) || - ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1))) - { - // breathing_interrupt_disable(); - } - - setPWM(cie_lightness(scale_backlight((uint16_t) pgm_read_byte(&breathing_table[index]) * 0x0101U))); -} - -#endif // BACKLIGHT_BREATHING -#endif // BACKLIGHT_ENABLE diff --git a/keyboards/ymdk_np21/config.h b/keyboards/ymdk_np21/config.h index 60c5277761..91478d9035 100644 --- a/keyboards/ymdk_np21/config.h +++ b/keyboards/ymdk_np21/config.h @@ -15,10 +15,9 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include "config_common.h" +#pragma once -#ifndef CONFIG_H -#define CONFIG_H +#include "config_common.h" #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D @@ -37,8 +36,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW +#define BACKLIGHT_PIN D4 #define BACKLIGHT_LEVELS 12 -// #define BACKLIGHT_BREATHING // works, but BL_TOGG might not work +#define BACKLIGHT_BREATHING #define TAPPING_TOGGLE 3 @@ -52,5 +52,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLED_NUM 5 #define RGB_DI_PIN E2 // NOTE: for PS2AVRGB boards, underglow commands are sent via I2C to 0xB0. #define RGBLIGHT_ANIMATIONS - -#endif diff --git a/keyboards/ymdk_np21/rules.mk b/keyboards/ymdk_np21/rules.mk index 772bee9285..237386bcea 100644 --- a/keyboards/ymdk_np21/rules.mk +++ b/keyboards/ymdk_np21/rules.mk @@ -19,7 +19,6 @@ CONSOLE_ENABLE = no COMMAND_ENABLE = yes BACKLIGHT_ENABLE = yes -BACKLIGHT_CUSTOM_DRIVER = yes RGBLIGHT_ENABLE = yes WS2812_DRIVER = i2c @@ -30,5 +29,3 @@ KEY_LOCK_ENABLE = yes SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend OPT_DEFS = -DDEBUG_LEVEL=0 - -SRC = backlight.c diff --git a/keyboards/ymdk_np21/ymdk_np21.c b/keyboards/ymdk_np21/ymdk_np21.c index f2b3d46dab..5bf1597581 100644 --- a/keyboards/ymdk_np21/ymdk_np21.c +++ b/keyboards/ymdk_np21/ymdk_np21.c @@ -18,20 +18,19 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "ymdk_np21.h" -#include "backlight.h" -#include "backlight_custom.h" - -#ifdef BACKLIGHT_ENABLE -/// Overrides functions in `quantum.c` -void backlight_init_ports(void) { - b_led_init_ports(); +void keyboard_pre_init_kb(void) { + led_init_ports(); + keyboard_pre_init_user(); } -void backlight_task(void) { - b_led_task(); +void led_init_ports(void) { + setPinOutput(D0); + writePinHigh(D0); } -void backlight_set(uint8_t level) { - b_led_set(level); +bool led_update_kb(led_t led_state) { + if (led_update_user(led_state)) { + writePin(D0, !led_state.num_lock); + } + return true; } -#endif |