Relocate Adafruit BLE code (#14530)

5 files changed, 0 insertions, 939 deletions

diff --git a/tmk_core/protocol/lufa/adafruit_ble.cpp b/tmk_core/protocol/lufa/adafruit_ble.cpp
deleted file mode 100644
index 3f2cc35734..0000000000
--- a/tmk_core/protocol/lufa/adafruit_ble.cpp
+++ /dev/null
@@ -1,701 +0,0 @@
-#include "adafruit_ble.h"
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <alloca.h>
-#include "debug.h"
-#include "timer.h"
-#include "action_util.h"
-#include "ringbuffer.hpp"
-#include <string.h>
-#include "spi_master.h"
-#include "wait.h"
-#include "analog.h"
-#include "progmem.h"
-
-// These are the pin assignments for the 32u4 boards.
-// You may define them to something else in your config.h
-// if yours is wired up differently.
-#ifndef AdafruitBleResetPin
-#    define AdafruitBleResetPin D4
-#endif
-
-#ifndef AdafruitBleCSPin
-#    define AdafruitBleCSPin B4
-#endif
-
-#ifndef AdafruitBleIRQPin
-#    define AdafruitBleIRQPin E6
-#endif
-
-#ifndef AdafruitBleSpiClockSpeed
-#    define AdafruitBleSpiClockSpeed 4000000UL  // SCK frequency
-#endif
-
-#define SCK_DIVISOR (F_CPU / AdafruitBleSpiClockSpeed)
-
-#define SAMPLE_BATTERY
-#define ConnectionUpdateInterval 1000 /* milliseconds */
-
-#ifndef BATTERY_LEVEL_PIN
-#    define BATTERY_LEVEL_PIN B5
-#endif
-
-static struct {
-    bool is_connected;
-    bool initialized;
-    bool configured;
-
-#define ProbedEvents 1
-#define UsingEvents 2
-    bool event_flags;
-
-#ifdef SAMPLE_BATTERY
-    uint16_t last_battery_update;
-    uint32_t vbat;
-#endif
-    uint16_t last_connection_update;
-} state;
-
-// Commands are encoded using SDEP and sent via SPI
-// https://github.com/adafruit/Adafruit_BluefruitLE_nRF51/blob/master/SDEP.md
-
-#define SdepMaxPayload 16
-struct sdep_msg {
-    uint8_t type;
-    uint8_t cmd_low;
-    uint8_t cmd_high;
-    struct __attribute__((packed)) {
-        uint8_t len : 7;
-        uint8_t more : 1;
-    };
-    uint8_t payload[SdepMaxPayload];
-} __attribute__((packed));
-
-// The recv latency is relatively high, so when we're hammering keys quickly,
-// we want to avoid waiting for the responses in the matrix loop.  We maintain
-// a short queue for that.  Since there is quite a lot of space overhead for
-// the AT command representation wrapped up in SDEP, we queue the minimal
-// information here.
-
-enum queue_type {
-    QTKeyReport,  // 1-byte modifier + 6-byte key report
-    QTConsumer,   // 16-bit key code
-#ifdef MOUSE_ENABLE
-    QTMouseMove,  // 4-byte mouse report
-#endif
-};
-
-struct queue_item {
-    enum queue_type queue_type;
-    uint16_t        added;
-    union __attribute__((packed)) {
-        struct __attribute__((packed)) {
-            uint8_t modifier;
-            uint8_t keys[6];
-        } key;
-
-        uint16_t consumer;
-        struct __attribute__((packed)) {
-            int8_t  x, y, scroll, pan;
-            uint8_t buttons;
-        } mousemove;
-    };
-};
-
-// Items that we wish to send
-static RingBuffer<queue_item, 40> send_buf;
-// Pending response; while pending, we can't send any more requests.
-// This records the time at which we sent the command for which we
-// are expecting a response.
-static RingBuffer<uint16_t, 2> resp_buf;
-
-static bool process_queue_item(struct queue_item *item, uint16_t timeout);
-
-enum sdep_type {
-    SdepCommand       = 0x10,
-    SdepResponse      = 0x20,
-    SdepAlert         = 0x40,
-    SdepError         = 0x80,
-    SdepSlaveNotReady = 0xFE,  // Try again later
-    SdepSlaveOverflow = 0xFF,  // You read more data than is available
-};
-
-enum ble_cmd {
-    BleInitialize = 0xBEEF,
-    BleAtWrapper  = 0x0A00,
-    BleUartTx     = 0x0A01,
-    BleUartRx     = 0x0A02,
-};
-
-enum ble_system_event_bits {
-    BleSystemConnected    = 0,
-    BleSystemDisconnected = 1,
-    BleSystemUartRx       = 8,
-    BleSystemMidiRx       = 10,
-};
-
-#define SdepTimeout 150             /* milliseconds */
-#define SdepShortTimeout 10         /* milliseconds */
-#define SdepBackOff 25              /* microseconds */
-#define BatteryUpdateInterval 10000 /* milliseconds */
-
-static bool at_command(const char *cmd, char *resp, uint16_t resplen, bool verbose, uint16_t timeout = SdepTimeout);
-static bool at_command_P(const char *cmd, char *resp, uint16_t resplen, bool verbose = false);
-
-// Send a single SDEP packet
-static bool sdep_send_pkt(const struct sdep_msg *msg, uint16_t timeout) {
-    spi_start(AdafruitBleCSPin, false, 0, SCK_DIVISOR);
-    uint16_t timerStart = timer_read();
-    bool     success    = false;
-    bool     ready      = false;
-
-    do {
-        ready = spi_write(msg->type) != SdepSlaveNotReady;
-        if (ready) {
-            break;
-        }
-
-        // Release it and let it initialize
-        spi_stop();
-        wait_us(SdepBackOff);
-        spi_start(AdafruitBleCSPin, false, 0, SCK_DIVISOR);
-    } while (timer_elapsed(timerStart) < timeout);
-
-    if (ready) {
-        // Slave is ready; send the rest of the packet
-        spi_transmit(&msg->cmd_low, sizeof(*msg) - (1 + sizeof(msg->payload)) + msg->len);
-        success = true;
-    }
-
-    spi_stop();
-
-    return success;
-}
-
-static inline void sdep_build_pkt(struct sdep_msg *msg, uint16_t command, const uint8_t *payload, uint8_t len, bool moredata) {
-    msg->type     = SdepCommand;
-    msg->cmd_low  = command & 0xFF;
-    msg->cmd_high = command >> 8;
-    msg->len      = len;
-    msg->more     = (moredata && len == SdepMaxPayload) ? 1 : 0;
-
-    static_assert(sizeof(*msg) == 20, "msg is correctly packed");
-
-    memcpy(msg->payload, payload, len);
-}
-
-// Read a single SDEP packet
-static bool sdep_recv_pkt(struct sdep_msg *msg, uint16_t timeout) {
-    bool     success    = false;
-    uint16_t timerStart = timer_read();
-    bool     ready      = false;
-
-    do {
-        ready = readPin(AdafruitBleIRQPin);
-        if (ready) {
-            break;
-        }
-        wait_us(1);
-    } while (timer_elapsed(timerStart) < timeout);
-
-    if (ready) {
-        spi_start(AdafruitBleCSPin, false, 0, SCK_DIVISOR);
-
-        do {
-            // Read the command type, waiting for the data to be ready
-            msg->type = spi_read();
-            if (msg->type == SdepSlaveNotReady || msg->type == SdepSlaveOverflow) {
-                // Release it and let it initialize
-                spi_stop();
-                wait_us(SdepBackOff);
-                spi_start(AdafruitBleCSPin, false, 0, SCK_DIVISOR);
-                continue;
-            }
-
-            // Read the rest of the header
-            spi_receive(&msg->cmd_low, sizeof(*msg) - (1 + sizeof(msg->payload)));
-
-            // and get the payload if there is any
-            if (msg->len <= SdepMaxPayload) {
-                spi_receive(msg->payload, msg->len);
-            }
-            success = true;
-            break;
-        } while (timer_elapsed(timerStart) < timeout);
-
-        spi_stop();
-    }
-    return success;
-}
-
-static void resp_buf_read_one(bool greedy) {
-    uint16_t last_send;
-    if (!resp_buf.peek(last_send)) {
-        return;
-    }
-
-    if (readPin(AdafruitBleIRQPin)) {
-        struct sdep_msg msg;
-
-    again:
-        if (sdep_recv_pkt(&msg, SdepTimeout)) {
-            if (!msg.more) {
-                // We got it; consume this entry
-                resp_buf.get(last_send);
-                dprintf("recv latency %dms\n", TIMER_DIFF_16(timer_read(), last_send));
-            }
-
-            if (greedy && resp_buf.peek(last_send) && readPin(AdafruitBleIRQPin)) {
-                goto again;
-            }
-        }
-
-    } else if (timer_elapsed(last_send) > SdepTimeout * 2) {
-        dprintf("waiting_for_result: timeout, resp_buf size %d\n", (int)resp_buf.size());
-
-        // Timed out: consume this entry
-        resp_buf.get(last_send);
-    }
-}
-
-static void send_buf_send_one(uint16_t timeout = SdepTimeout) {
-    struct queue_item item;
-
-    // Don't send anything more until we get an ACK
-    if (!resp_buf.empty()) {
-        return;
-    }
-
-    if (!send_buf.peek(item)) {
-        return;
-    }
-    if (process_queue_item(&item, timeout)) {
-        // commit that peek
-        send_buf.get(item);
-        dprintf("send_buf_send_one: have %d remaining\n", (int)send_buf.size());
-    } else {
-        dprint("failed to send, will retry\n");
-        wait_ms(SdepTimeout);
-        resp_buf_read_one(true);
-    }
-}
-
-static void resp_buf_wait(const char *cmd) {
-    bool didPrint = false;
-    while (!resp_buf.empty()) {
-        if (!didPrint) {
-            dprintf("wait on buf for %s\n", cmd);
-            didPrint = true;
-        }
-        resp_buf_read_one(true);
-    }
-}
-
-static bool ble_init(void) {
-    state.initialized  = false;
-    state.configured   = false;
-    state.is_connected = false;
-
-    setPinInput(AdafruitBleIRQPin);
-
-    spi_init();
-
-    // Perform a hardware reset
-    setPinOutput(AdafruitBleResetPin);
-    writePinHigh(AdafruitBleResetPin);
-    writePinLow(AdafruitBleResetPin);
-    wait_ms(10);
-    writePinHigh(AdafruitBleResetPin);
-
-    wait_ms(1000);  // Give it a second to initialize
-
-    state.initialized = true;
-    return state.initialized;
-}
-
-static inline uint8_t min(uint8_t a, uint8_t b) { return a < b ? a : b; }
-
-static bool read_response(char *resp, uint16_t resplen, bool verbose) {
-    char *dest = resp;
-    char *end  = dest + resplen;
-
-    while (true) {
-        struct sdep_msg msg;
-
-        if (!sdep_recv_pkt(&msg, 2 * SdepTimeout)) {
-            dprint("sdep_recv_pkt failed\n");
-            return false;
-        }
-
-        if (msg.type != SdepResponse) {
-            *resp = 0;
-            return false;
-        }
-
-        uint8_t len = min(msg.len, end - dest);
-        if (len > 0) {
-            memcpy(dest, msg.payload, len);
-            dest += len;
-        }
-
-        if (!msg.more) {
-            // No more data is expected!
-            break;
-        }
-    }
-
-    // Ensure the response is NUL terminated
-    *dest = 0;
-
-    // "Parse" the result text; we want to snip off the trailing OK or ERROR line
-    // Rewind past the possible trailing CRLF so that we can strip it
-    --dest;
-    while (dest > resp && (dest[0] == '\n' || dest[0] == '\r')) {
-        *dest = 0;
-        --dest;
-    }
-
-    // Look back for start of preceeding line
-    char *last_line = strrchr(resp, '\n');
-    if (last_line) {
-        ++last_line;
-    } else {
-        last_line = resp;
-    }
-
-    bool              success       = false;
-    static const char kOK[] PROGMEM = "OK";
-
-    success = !strcmp_P(last_line, kOK);
-
-    if (verbose || !success) {
-        dprintf("result: %s\n", resp);
-    }
-    return success;
-}
-
-static bool at_command(const char *cmd, char *resp, uint16_t resplen, bool verbose, uint16_t timeout) {
-    const char *    end = cmd + strlen(cmd);
-    struct sdep_msg msg;
-
-    if (verbose) {
-        dprintf("ble send: %s\n", cmd);
-    }
-
-    if (resp) {
-        // They want to decode the response, so we need to flush and wait
-        // for all pending I/O to finish before we start this one, so
-        // that we don't confuse the results
-        resp_buf_wait(cmd);
-        *resp = 0;
-    }
-
-    // Fragment the command into a series of SDEP packets
-    while (end - cmd > SdepMaxPayload) {
-        sdep_build_pkt(&msg, BleAtWrapper, (uint8_t *)cmd, SdepMaxPayload, true);
-        if (!sdep_send_pkt(&msg, timeout)) {
-            return false;
-        }
-        cmd += SdepMaxPayload;
-    }
-
-    sdep_build_pkt(&msg, BleAtWrapper, (uint8_t *)cmd, end - cmd, false);
-    if (!sdep_send_pkt(&msg, timeout)) {
-        return false;
-    }
-
-    if (resp == NULL) {
-        uint16_t now = timer_read();
-        while (!resp_buf.enqueue(now)) {
-            resp_buf_read_one(false);
-        }
-        uint16_t later = timer_read();
-        if (TIMER_DIFF_16(later, now) > 0) {
-            dprintf("waited %dms for resp_buf\n", TIMER_DIFF_16(later, now));
-        }
-        return true;
-    }
-
-    return read_response(resp, resplen, verbose);
-}
-
-bool at_command_P(const char *cmd, char *resp, uint16_t resplen, bool verbose) {
-    char *cmdbuf = (char *)alloca(strlen_P(cmd) + 1);
-    strcpy_P(cmdbuf, cmd);
-    return at_command(cmdbuf, resp, resplen, verbose);
-}
-
-bool adafruit_ble_is_connected(void) { return state.is_connected; }
-
-bool adafruit_ble_enable_keyboard(void) {
-    char resbuf[128];
-
-    if (!state.initialized && !ble_init()) {
-        return false;
-    }
-
-    state.configured = false;
-
-    // Disable command echo
-    static const char kEcho[] PROGMEM = "ATE=0";
-    // Make the advertised name match the keyboard
-    static const char kGapDevName[] PROGMEM = "AT+GAPDEVNAME=" STR(PRODUCT);
-    // Turn on keyboard support
-    static const char kHidEnOn[] PROGMEM = "AT+BLEHIDEN=1";
-
-    // Adjust intervals to improve latency.  This causes the "central"
-    // system (computer/tablet) to poll us every 10-30 ms.  We can't
-    // set a smaller value than 10ms, and 30ms seems to be the natural
-    // processing time on my macbook.  Keeping it constrained to that
-    // feels reasonable to type to.
-    static const char kGapIntervals[] PROGMEM = "AT+GAPINTERVALS=10,30,,";
-
-    // Reset the device so that it picks up the above changes
-    static const char kATZ[] PROGMEM = "ATZ";
-
-    // Turn down the power level a bit
-    static const char  kPower[] PROGMEM             = "AT+BLEPOWERLEVEL=-12";
-    static PGM_P const configure_commands[] PROGMEM = {
-        kEcho, kGapIntervals, kGapDevName, kHidEnOn, kPower, kATZ,
-    };
-
-    uint8_t i;
-    for (i = 0; i < sizeof(configure_commands) / sizeof(configure_commands[0]); ++i) {
-        PGM_P cmd;
-        memcpy_P(&cmd, configure_commands + i, sizeof(cmd));
-
-        if (!at_command_P(cmd, resbuf, sizeof(resbuf))) {
-            dprintf("failed BLE command: %S: %s\n", cmd, resbuf);
-            goto fail;
-        }
-    }
-
-    state.configured = true;
-
-    // Check connection status in a little while; allow the ATZ time
-    // to kick in.
-    state.last_connection_update = timer_read();
-fail:
-    return state.configured;
-}
-
-static void set_connected(bool connected) {
-    if (connected != state.is_connected) {
-        if (connected) {
-            dprint("BLE connected\n");
-        } else {
-            dprint("BLE disconnected\n");
-        }
-        state.is_connected = connected;
-
-        // TODO: if modifiers are down on the USB interface and
-        // we cut over to BLE or vice versa, they will remain stuck.
-        // This feels like a good point to do something like clearing
-        // the keyboard and/or generating a fake all keys up message.
-        // However, I've noticed that it takes a couple of seconds
-        // for macOS to to start recognizing key presses after BLE
-        // is in the connected state, so I worry that doing that
-        // here may not be good enough.
-    }
-}
-
-void adafruit_ble_task(void) {
-    char resbuf[48];
-
-    if (!state.configured && !adafruit_ble_enable_keyboard()) {
-        return;
-    }
-    resp_buf_read_one(true);
-    send_buf_send_one(SdepShortTimeout);
-
-    if (resp_buf.empty() && (state.event_flags & UsingEvents) && readPin(AdafruitBleIRQPin)) {
-        // Must be an event update
-        if (at_command_P(PSTR("AT+EVENTSTATUS"), resbuf, sizeof(resbuf))) {
-            uint32_t mask = strtoul(resbuf, NULL, 16);
-
-            if (mask & BleSystemConnected) {
-                set_connected(true);
-            } else if (mask & BleSystemDisconnected) {
-                set_connected(false);
-            }
-        }
-    }
-
-    if (timer_elapsed(state.last_connection_update) > ConnectionUpdateInterval) {
-        bool shouldPoll = true;
-        if (!(state.event_flags & ProbedEvents)) {
-            // Request notifications about connection status changes.
-            // This only works in SPIFRIEND firmware > 0.6.7, which is why
-            // we check for this conditionally here.
-            // Note that at the time of writing, HID reports only work correctly
-            // with Apple products on firmware version 0.6.7!
-            // https://forums.adafruit.com/viewtopic.php?f=8&t=104052
-            if (at_command_P(PSTR("AT+EVENTENABLE=0x1"), resbuf, sizeof(resbuf))) {
-                at_command_P(PSTR("AT+EVENTENABLE=0x2"), resbuf, sizeof(resbuf));
-                state.event_flags |= UsingEvents;
-            }
-            state.event_flags |= ProbedEvents;
-
-            // leave shouldPoll == true so that we check at least once
-            // before relying solely on events
-        } else {
-            shouldPoll = false;
-        }
-
-        static const char kGetConn[] PROGMEM = "AT+GAPGETCONN";
-        state.last_connection_update         = timer_read();
-
-        if (at_command_P(kGetConn, resbuf, sizeof(resbuf))) {
-            set_connected(atoi(resbuf));
-        }
-    }
-
-#ifdef SAMPLE_BATTERY
-    if (timer_elapsed(state.last_battery_update) > BatteryUpdateInterval && resp_buf.empty()) {
-        state.last_battery_update = timer_read();
-
-        state.vbat = analogReadPin(BATTERY_LEVEL_PIN);
-    }
-#endif
-}
-
-static bool process_queue_item(struct queue_item *item, uint16_t timeout) {
-    char cmdbuf[48];
-    char fmtbuf[64];
-
-    // Arrange to re-check connection after keys have settled
-    state.last_connection_update = timer_read();
-
-#if 1
-    if (TIMER_DIFF_16(state.last_connection_update, item->added) > 0) {
-        dprintf("send latency %dms\n", TIMER_DIFF_16(state.last_connection_update, item->added));
-    }
-#endif
-
-    switch (item->queue_type) {
-        case QTKeyReport:
-            strcpy_P(fmtbuf, PSTR("AT+BLEKEYBOARDCODE=%02x-00-%02x-%02x-%02x-%02x-%02x-%02x"));
-            snprintf(cmdbuf, sizeof(cmdbuf), fmtbuf, item->key.modifier, item->key.keys[0], item->key.keys[1], item->key.keys[2], item->key.keys[3], item->key.keys[4], item->key.keys[5]);
-            return at_command(cmdbuf, NULL, 0, true, timeout);
-
-        case QTConsumer:
-            strcpy_P(fmtbuf, PSTR("AT+BLEHIDCONTROLKEY=0x%04x"));
-            snprintf(cmdbuf, sizeof(cmdbuf), fmtbuf, item->consumer);
-            return at_command(cmdbuf, NULL, 0, true, timeout);
-
-#ifdef MOUSE_ENABLE
-        case QTMouseMove:
-            strcpy_P(fmtbuf, PSTR("AT+BLEHIDMOUSEMOVE=%d,%d,%d,%d"));
-            snprintf(cmdbuf, sizeof(cmdbuf), fmtbuf, item->mousemove.x, item->mousemove.y, item->mousemove.scroll, item->mousemove.pan);
-            if (!at_command(cmdbuf, NULL, 0, true, timeout)) {
-                return false;
-            }
-            strcpy_P(cmdbuf, PSTR("AT+BLEHIDMOUSEBUTTON="));
-            if (item->mousemove.buttons & MOUSE_BTN1) {
-                strcat(cmdbuf, "L");
-            }
-            if (item->mousemove.buttons & MOUSE_BTN2) {
-                strcat(cmdbuf, "R");
-            }
-            if (item->mousemove.buttons & MOUSE_BTN3) {
-                strcat(cmdbuf, "M");
-            }
-            if (item->mousemove.buttons == 0) {
-                strcat(cmdbuf, "0");
-            }
-            return at_command(cmdbuf, NULL, 0, true, timeout);
-#endif
-        default:
-            return true;
-    }
-}
-
-void adafruit_ble_send_keys(uint8_t hid_modifier_mask, uint8_t *keys, uint8_t nkeys) {
-    struct queue_item item;
-    bool              didWait = false;
-
-    item.queue_type   = QTKeyReport;
-    item.key.modifier = hid_modifier_mask;
-    item.added        = timer_read();
-
-    while (nkeys >= 0) {
-        item.key.keys[0] = keys[0];
-        item.key.keys[1] = nkeys >= 1 ? keys[1] : 0;
-        item.key.keys[2] = nkeys >= 2 ? keys[2] : 0;
-        item.key.keys[3] = nkeys >= 3 ? keys[3] : 0;
-        item.key.keys[4] = nkeys >= 4 ? keys[4] : 0;
-        item.key.keys[5] = nkeys >= 5 ? keys[5] : 0;
-
-        if (!send_buf.enqueue(item)) {
-            if (!didWait) {
-                dprint("wait for buf space\n");
-                didWait = true;
-            }
-            send_buf_send_one();
-            continue;
-        }
-
-        if (nkeys <= 6) {
-            return;
-        }
-
-        nkeys -= 6;
-        keys += 6;
-    }
-}
-
-void adafruit_ble_send_consumer_key(uint16_t usage) {
-    struct queue_item item;
-
-    item.queue_type = QTConsumer;
-    item.consumer   = usage;
-
-    while (!send_buf.enqueue(item)) {
-        send_buf_send_one();
-    }
-}
-
-#ifdef MOUSE_ENABLE
-void adafruit_ble_send_mouse_move(int8_t x, int8_t y, int8_t scroll, int8_t pan, uint8_t buttons) {
-    struct queue_item item;
-
-    item.queue_type        = QTMouseMove;
-    item.mousemove.x       = x;
-    item.mousemove.y       = y;
-    item.mousemove.scroll  = scroll;
-    item.mousemove.pan     = pan;
-    item.mousemove.buttons = buttons;
-
-    while (!send_buf.enqueue(item)) {
-        send_buf_send_one();
-    }
-}
-#endif
-
-uint32_t adafruit_ble_read_battery_voltage(void) { return state.vbat; }
-
-bool adafruit_ble_set_mode_leds(bool on) {
-    if (!state.configured) {
-        return false;
-    }
-
-    // The "mode" led is the red blinky one
-    at_command_P(on ? PSTR("AT+HWMODELED=1") : PSTR("AT+HWMODELED=0"), NULL, 0);
-
-    // Pin 19 is the blue "connected" LED; turn that off too.
-    // When turning LEDs back on, don't turn that LED on if we're
-    // not connected, as that would be confusing.
-    at_command_P(on && state.is_connected ? PSTR("AT+HWGPIO=19,1") : PSTR("AT+HWGPIO=19,0"), NULL, 0);
-    return true;
-}
-
-// https://learn.adafruit.com/adafruit-feather-32u4-bluefruit-le/ble-generic#at-plus-blepowerlevel
-bool adafruit_ble_set_power_level(int8_t level) {
-    char cmd[46];
-    if (!state.configured) {
-        return false;
-    }
-    snprintf(cmd, sizeof(cmd), "AT+BLEPOWERLEVEL=%d", level);
-    return at_command(cmd, NULL, 0, false);
-}
diff --git a/tmk_core/protocol/lufa/adafruit_ble.h b/tmk_core/protocol/lufa/adafruit_ble.h
deleted file mode 100644
index b43e0771d9..0000000000
--- a/tmk_core/protocol/lufa/adafruit_ble.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/* Bluetooth Low Energy Protocol for QMK.
- * Author: Wez Furlong, 2016
- * Supports the Adafruit BLE board built around the nRF51822 chip.
- */
-
-#pragma once
-
-#include <stdbool.h>
-#include <stdint.h>
-#include <string.h>
-
-#include "config_common.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Instruct the module to enable HID keyboard support and reset */
-extern bool adafruit_ble_enable_keyboard(void);
-
-/* Query to see if the BLE module is connected */
-extern bool adafruit_ble_query_is_connected(void);
-
-/* Returns true if we believe that the BLE module is connected.
- * This uses our cached understanding that is maintained by
- * calling ble_task() periodically. */
-extern bool adafruit_ble_is_connected(void);
-
-/* Call this periodically to process BLE-originated things */
-extern void adafruit_ble_task(void);
-
-/* Generates keypress events for a set of keys.
- * The hid modifier mask specifies the state of the modifier keys for
- * this set of keys.
- * Also sends a key release indicator, so that the keys do not remain
- * held down. */
-extern void adafruit_ble_send_keys(uint8_t hid_modifier_mask, uint8_t *keys, uint8_t nkeys);
-
-/* Send a consumer usage.
- * (milliseconds) */
-extern void adafruit_ble_send_consumer_key(uint16_t usage);
-
-#ifdef MOUSE_ENABLE
-/* Send a mouse/wheel movement report.
- * The parameters are signed and indicate positive or negative direction
- * change. */
-extern void adafruit_ble_send_mouse_move(int8_t x, int8_t y, int8_t scroll, int8_t pan, uint8_t buttons);
-#endif
-
-/* Compute battery voltage by reading an analog pin.
- * Returns the integer number of millivolts */
-extern uint32_t adafruit_ble_read_battery_voltage(void);
-
-extern bool adafruit_ble_set_mode_leds(bool on);
-extern bool adafruit_ble_set_power_level(int8_t level);
-
-#ifdef __cplusplus
-}
-#endif
diff --git a/tmk_core/protocol/lufa/outputselect.c b/tmk_core/protocol/lufa/outputselect.c
deleted file mode 100644
index f758c65280..0000000000
--- a/tmk_core/protocol/lufa/outputselect.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
-Copyright 2017 Priyadi Iman Nurcahyo
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "outputselect.h"
-
-#if defined(PROTOCOL_LUFA)
-#    include "lufa.h"
-#endif
-
-#ifdef MODULE_ADAFRUIT_BLE
-#    include "adafruit_ble.h"
-#endif
-
-uint8_t desired_output = OUTPUT_DEFAULT;
-
-/** \brief Set Output
- *
- * FIXME: Needs doc
- */
-void set_output(uint8_t output) {
-    set_output_user(output);
-    desired_output = output;
-}
-
-/** \brief Set Output User
- *
- * FIXME: Needs doc
- */
-__attribute__((weak)) void set_output_user(uint8_t output) {}
-
-static bool is_usb_configured(void) {
-#if defined(PROTOCOL_LUFA)
-    return USB_DeviceState == DEVICE_STATE_Configured;
-#endif
-}
-
-/** \brief Auto Detect Output
- *
- * FIXME: Needs doc
- */
-uint8_t auto_detect_output(void) {
-    if (is_usb_configured()) {
-        return OUTPUT_USB;
-    }
-
-#ifdef MODULE_ADAFRUIT_BLE
-    if (adafruit_ble_is_connected()) {
-        return OUTPUT_BLUETOOTH;
-    }
-#endif
-
-#ifdef BLUETOOTH_ENABLE
-    return OUTPUT_BLUETOOTH;  // should check if BT is connected here
-#endif
-
-    return OUTPUT_NONE;
-}
-
-/** \brief Where To Send
- *
- * FIXME: Needs doc
- */
-uint8_t where_to_send(void) {
-    if (desired_output == OUTPUT_AUTO) {
-        return auto_detect_output();
-    }
-    return desired_output;
-}
diff --git a/tmk_core/protocol/lufa/outputselect.h b/tmk_core/protocol/lufa/outputselect.h
deleted file mode 100644
index c4548e1122..0000000000
--- a/tmk_core/protocol/lufa/outputselect.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
-Copyright 2017 Priyadi Iman Nurcahyo
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include <stdint.h>
-
-enum outputs {
-    OUTPUT_AUTO,
-
-    OUTPUT_NONE,
-    OUTPUT_USB,
-    OUTPUT_BLUETOOTH
-};
-
-#ifndef OUTPUT_DEFAULT
-#    define OUTPUT_DEFAULT OUTPUT_AUTO
-#endif
-
-void    set_output(uint8_t output);
-void    set_output_user(uint8_t output);
-uint8_t auto_detect_output(void);
-uint8_t where_to_send(void);
diff --git a/tmk_core/protocol/lufa/ringbuffer.hpp b/tmk_core/protocol/lufa/ringbuffer.hpp
deleted file mode 100644
index 70a3c4881d..0000000000
--- a/tmk_core/protocol/lufa/ringbuffer.hpp
+++ /dev/null
@@ -1,66 +0,0 @@
-#pragma once
-// A simple ringbuffer holding Size elements of type T
-template <typename T, uint8_t Size>
-class RingBuffer {
- protected:
-  T buf_[Size];
-  uint8_t head_{0}, tail_{0};
- public:
-  inline uint8_t nextPosition(uint8_t position) {
-    return (position + 1) % Size;
-  }
-
-  inline uint8_t prevPosition(uint8_t position) {
-    if (position == 0) {
-      return Size - 1;
-    }
-    return position - 1;
-  }
-
-  inline bool enqueue(const T &item) {
-    static_assert(Size > 1, "RingBuffer size must be > 1");
-    uint8_t next = nextPosition(head_);
-    if (next == tail_) {
-      // Full
-      return false;
-    }
-
-    buf_[head_] = item;
-    head_ = next;
-    return true;
-  }
-
-  inline bool get(T &dest, bool commit = true) {
-    auto tail = tail_;
-    if (tail == head_) {
-      // No more data
-      return false;
-    }
-
-    dest = buf_[tail];
-    tail = nextPosition(tail);
-
-    if (commit) {
-      tail_ = tail;
-    }
-    return true;
-  }
-
-  inline bool empty() const { return head_ == tail_; }
-
-  inline uint8_t size() const {
-    int diff = head_ - tail_;
-    if (diff >= 0) {
-      return diff;
-    }
-    return Size + diff;
-  }
-
-  inline T& front() {
-    return buf_[tail_];
-  }
-
-  inline bool peek(T &item) {
-    return get(item, false);
-  }
-};