Move matrix config to info.json, part 5 (#20003)

Co-authored-by: Nick Brassel <nick@tzarc.org>

8 files changed, 20 insertions, 61 deletions

diff --git a/keyboards/sck/gtm/config.h b/keyboards/sck/gtm/config.h
index f4961f2242..a99fc7a3e8 100644
--- a/keyboards/sck/gtm/config.h
+++ b/keyboards/sck/gtm/config.h
@@ -1,13 +1,5 @@
 #pragma once
 
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { C4, C5, D1 }
-#define MATRIX_COL_PINS { B4, B5, B6, B7, C7, D0 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 
diff --git a/keyboards/sck/gtm/info.json b/keyboards/sck/gtm/info.json
index 3f254f2c77..c3cc44cd64 100644
--- a/keyboards/sck/gtm/info.json
+++ b/keyboards/sck/gtm/info.json
@@ -8,6 +8,11 @@
         "pid": "0x6090",
         "device_version": "0.0.2"
     },
+    "matrix_pins": {
+        "cols": ["B4", "B5", "B6", "B7", "C7", "D0"],
+        "rows": ["C4", "C5", "D1"]
+    },
+    "diode_direction": "COL2ROW",
     "encoder": {
         "rotary": [
             {"pin_a": "D2", "pin_b": "D3", "resolution": 1}
diff --git a/keyboards/sck/m0116b/config.h b/keyboards/sck/m0116b/config.h
index f76b93ff68..a3c400ab47 100644
--- a/keyboards/sck/m0116b/config.h
+++ b/keyboards/sck/m0116b/config.h
@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D1, F0, F1, F4, F5, F6 }
-#define MATRIX_COL_PINS { D5, D3, D2, D0, B3, B2, B1, B0, E6, B5, B6, C6, C7, F7, D4, D6, D7, B4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/sck/m0116b/info.json b/keyboards/sck/m0116b/info.json
index 8588e9d605..8a2c4d109a 100644
--- a/keyboards/sck/m0116b/info.json
+++ b/keyboards/sck/m0116b/info.json
@@ -8,6 +8,11 @@
     "pid": "0x0000",
     "device_version": "0.0.1"
   },
+  "matrix_pins": {
+    "cols": ["D5", "D3", "D2", "D0", "B3", "B2", "B1", "B0", "E6", "B5", "B6", "C6", "C7", "F7", "D4", "D6", "D7", "B4"],
+    "rows": ["D1", "F0", "F1", "F4", "F5", "F6"]
+  },
+  "diode_direction": "COL2ROW",
   "bootmagic": {
     "matrix": [0, 6]
   },
diff --git a/keyboards/sck/neiso/config.h b/keyboards/sck/neiso/config.h
index 21a4f0d60c..a3c400ab47 100644
--- a/keyboards/sck/neiso/config.h
+++ b/keyboards/sck/neiso/config.h
@@ -17,25 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS \
-    { F4 }
-#define MATRIX_COL_PINS \
-    { B3, D2, F5, F7, B4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/sck/neiso/info.json b/keyboards/sck/neiso/info.json
index 3140669af5..2f233b4066 100644
--- a/keyboards/sck/neiso/info.json
+++ b/keyboards/sck/neiso/info.json
@@ -8,6 +8,11 @@
         "pid": "0x0000",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B3", "D2", "F5", "F7", "B4"],
+        "rows": ["F4"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "caterina",
     "layouts": {
diff --git a/keyboards/sck/osa/config.h b/keyboards/sck/osa/config.h
index 801a7fdc16..b81c970db7 100644
--- a/keyboards/sck/osa/config.h
+++ b/keyboards/sck/osa/config.h
@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6, B0, B1, B2, B3, B7 }
-#define MATRIX_COL_PINS { B4, D7, D5, D3, D2, D0, D1, B5 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
    #define RGB_DI_PIN D4
    #ifdef RGB_DI_PIN
    #define RGBLED_NUM 9
diff --git a/keyboards/sck/osa/info.json b/keyboards/sck/osa/info.json
index c919d3b6e8..547363e414 100644
--- a/keyboards/sck/osa/info.json
+++ b/keyboards/sck/osa/info.json
@@ -8,6 +8,11 @@
         "pid": "0x0001",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B4", "D7", "D5", "D3", "D2", "D0", "D1", "B5"],
+        "rows": ["F0", "F1", "F4", "F5", "F6", "B0", "B1", "B2", "B3", "B7"]
+    },
+    "diode_direction": "COL2ROW",
     "indicators": {
         "caps_lock": "C6",
         "num_lock": "C7",