RGB Matrix: driver naming cleanups (#21594)

3 files changed, 43 insertions, 43 deletions

diff --git a/keyboards/input_club/k_type/is31fl3733-dual.c b/keyboards/input_club/k_type/is31fl3733-dual.c
index 3898016875..2dec2b0a26 100644
--- a/keyboards/input_club/k_type/is31fl3733-dual.c
+++ b/keyboards/input_club/k_type/is31fl3733-dual.c
@@ -65,7 +65,7 @@ uint8_t g_twi_transfer_buffer[20];
 // The control buffers match the PG0 LED On/Off registers.
 // Storing them like this is optimal for I2C transfers to the registers.
 // We could optimize this and take out the unused registers from these
-// buffers and the transfers in IS31FL3733_write_pwm_buffer() but it's
+// buffers and the transfers in is31fl3733_write_pwm_buffer() but it's
 // probably not worth the extra complexity.
 uint8_t g_pwm_buffer[DRIVER_COUNT][192];
 bool    g_pwm_buffer_update_required[DRIVER_COUNT] = {false};
@@ -73,7 +73,7 @@ bool    g_pwm_buffer_update_required[DRIVER_COUNT] = {false};
 uint8_t g_led_control_registers[DRIVER_COUNT][24]             = {{0}, {0}};
 bool    g_led_control_registers_update_required[DRIVER_COUNT] = {false};
 
-bool IS31FL3733_write_register(uint8_t index, uint8_t addr, uint8_t reg, uint8_t data) {
+bool is31fl3733_write_register(uint8_t index, uint8_t addr, uint8_t reg, uint8_t data) {
     // If the transaction fails function returns false.
     g_twi_transfer_buffer[0] = reg;
     g_twi_transfer_buffer[1] = data;
@@ -92,7 +92,7 @@ bool IS31FL3733_write_register(uint8_t index, uint8_t addr, uint8_t reg, uint8_t
     return true;
 }
 
-bool IS31FL3733_write_pwm_buffer(uint8_t index, uint8_t addr, uint8_t *pwm_buffer) {
+bool is31fl3733_write_pwm_buffer(uint8_t index, uint8_t addr, uint8_t *pwm_buffer) {
     // Assumes PG1 is already selected.
     // If any of the transactions fails function returns false.
     // Transmit PWM registers in 12 transfers of 16 bytes.
@@ -123,7 +123,7 @@ bool IS31FL3733_write_pwm_buffer(uint8_t index, uint8_t addr, uint8_t *pwm_buffe
     return true;
 }
 
-void IS31FL3733_init(uint8_t bus, uint8_t addr, uint8_t sync) {
+void is31fl3733_init(uint8_t bus, uint8_t addr, uint8_t sync) {
     // In order to avoid the LEDs being driven with garbage data
     // in the LED driver's PWM registers, shutdown is enabled last.
     // Set up the mode and other settings, clear the PWM registers,
@@ -131,35 +131,35 @@ void IS31FL3733_init(uint8_t bus, uint8_t addr, uint8_t sync) {
     // Sync is passed so set it according to the datasheet.
 
     // Unlock the command register.
-    IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+    is31fl3733_write_register(bus, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
     // Select PG0
-    IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
+    is31fl3733_write_register(bus, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
     // Turn off all LEDs.
     for (int i = 0x00; i <= 0x17; i++) {
-        IS31FL3733_write_register(bus, addr, i, 0x00);
+        is31fl3733_write_register(bus, addr, i, 0x00);
     }
     // Unlock the command register.
-    IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+    is31fl3733_write_register(bus, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
     // Select PG1
-    IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
+    is31fl3733_write_register(bus, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
     // Set PWM on all LEDs to 0
     // No need to setup Breath registers to PWM as that is the default.
     for (int i = 0x00; i <= 0xBF; i++) {
-        IS31FL3733_write_register(bus, addr, i, 0x00);
+        is31fl3733_write_register(bus, addr, i, 0x00);
     }
     // Unlock the command register.
-    IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+    is31fl3733_write_register(bus, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
     // Select PG3
-    IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION);
+    is31fl3733_write_register(bus, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION);
     // Set global current to maximum.
-    IS31FL3733_write_register(bus, addr, ISSI_REG_GLOBALCURRENT, 0xFF);
+    is31fl3733_write_register(bus, addr, ISSI_REG_GLOBALCURRENT, 0xFF);
     // Disable software shutdown.
-    IS31FL3733_write_register(bus, addr, ISSI_REG_CONFIGURATION, (sync << 6) | 0x01);
+    is31fl3733_write_register(bus, addr, ISSI_REG_CONFIGURATION, (sync << 6) | 0x01);
     // Wait 10ms to ensure the device has woken up.
     wait_ms(10);
 }
 
-void IS31FL3733_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
+void is31fl3733_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
     if (index >= 0 && index < RGB_MATRIX_LED_COUNT) {
         is31_led led = g_is31_leds[index];
 
@@ -170,13 +170,13 @@ void IS31FL3733_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
     }
 }
 
-void IS31FL3733_set_color_all(uint8_t red, uint8_t green, uint8_t blue) {
+void is31fl3733_set_color_all(uint8_t red, uint8_t green, uint8_t blue) {
     for (int i = 0; i < RGB_MATRIX_LED_COUNT; i++) {
-        IS31FL3733_set_color(i, red, green, blue);
+        is31fl3733_set_color(i, red, green, blue);
     }
 }
 
-void IS31FL3733_set_led_control_register(uint8_t index, bool red, bool green, bool blue) {
+void is31fl3733_set_led_control_register(uint8_t index, bool red, bool green, bool blue) {
     is31_led led = g_is31_leds[index];
 
     uint8_t control_register_r = led.r / 8;
@@ -205,28 +205,28 @@ void IS31FL3733_set_led_control_register(uint8_t index, bool red, bool green, bo
     g_led_control_registers_update_required[led.driver] = true;
 }
 
-void IS31FL3733_update_pwm_buffers(uint8_t addr, uint8_t index) {
+void is31fl3733_update_pwm_buffers(uint8_t addr, uint8_t index) {
     if (g_pwm_buffer_update_required[index]) {
         // Firstly we need to unlock the command register and select PG1.
-        IS31FL3733_write_register(index, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
-        IS31FL3733_write_register(index, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
+        is31fl3733_write_register(index, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+        is31fl3733_write_register(index, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
 
         // If any of the transactions fail we risk writing dirty PG0,
         // refresh page 0 just in case.
-        if (!IS31FL3733_write_pwm_buffer(index, addr, g_pwm_buffer[index])) {
+        if (!is31fl3733_write_pwm_buffer(index, addr, g_pwm_buffer[index])) {
             g_led_control_registers_update_required[index] = true;
         }
     }
     g_pwm_buffer_update_required[index] = false;
 }
 
-void IS31FL3733_update_led_control_registers(uint8_t addr, uint8_t index) {
+void is31fl3733_update_led_control_registers(uint8_t addr, uint8_t index) {
     if (g_led_control_registers_update_required[index]) {
         // Firstly we need to unlock the command register and select PG0
-        IS31FL3733_write_register(index, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
-        IS31FL3733_write_register(index, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
+        is31fl3733_write_register(index, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+        is31fl3733_write_register(index, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
         for (int i = 0; i < 24; i++) {
-            IS31FL3733_write_register(index, addr, i, g_led_control_registers[index][i]);
+            is31fl3733_write_register(index, addr, i, g_led_control_registers[index][i]);
         }
     }
     g_led_control_registers_update_required[index] = false;
diff --git a/keyboards/input_club/k_type/is31fl3733-dual.h b/keyboards/input_club/k_type/is31fl3733-dual.h
index 16586714b8..1becefbf93 100644
--- a/keyboards/input_club/k_type/is31fl3733-dual.h
+++ b/keyboards/input_club/k_type/is31fl3733-dual.h
@@ -31,21 +31,21 @@ typedef struct is31_led {
 
 extern const is31_led PROGMEM g_is31_leds[RGB_MATRIX_LED_COUNT];
 
-void IS31FL3733_init(uint8_t bus, uint8_t addr, uint8_t sync);
-bool IS31FL3733_write_register(uint8_t index, uint8_t addr, uint8_t reg, uint8_t data);
-bool IS31FL3733_write_pwm_buffer(uint8_t index, uint8_t addr, uint8_t *pwm_buffer);
+void is31fl3733_init(uint8_t bus, uint8_t addr, uint8_t sync);
+bool is31fl3733_write_register(uint8_t index, uint8_t addr, uint8_t reg, uint8_t data);
+bool is31fl3733_write_pwm_buffer(uint8_t index, uint8_t addr, uint8_t *pwm_buffer);
 
-void IS31FL3733_set_color(int index, uint8_t red, uint8_t green, uint8_t blue);
-void IS31FL3733_set_color_all(uint8_t red, uint8_t green, uint8_t blue);
+void is31fl3733_set_color(int index, uint8_t red, uint8_t green, uint8_t blue);
+void is31fl3733_set_color_all(uint8_t red, uint8_t green, uint8_t blue);
 
-void IS31FL3733_set_led_control_register(uint8_t index, bool red, bool green, bool blue);
+void is31fl3733_set_led_control_register(uint8_t index, bool red, bool green, bool blue);
 
 // This should not be called from an interrupt
 // (eg. from a timer interrupt).
 // Call this while idle (in between matrix scans).
 // If the buffer is dirty, it will update the driver with the buffer.
-void IS31FL3733_update_pwm_buffers(uint8_t addr, uint8_t index); // index is the driver index
-void IS31FL3733_update_led_control_registers(uint8_t addr, uint8_t index);
+void is31fl3733_update_pwm_buffers(uint8_t addr, uint8_t index); // index is the driver index
+void is31fl3733_update_led_control_registers(uint8_t addr, uint8_t index);
 
 #define A_1 0x00
 #define A_2 0x01
diff --git a/keyboards/input_club/k_type/k_type-rgbdriver.c b/keyboards/input_club/k_type/k_type-rgbdriver.c
index 6529f98201..dc5d4abd67 100644
--- a/keyboards/input_club/k_type/k_type-rgbdriver.c
+++ b/keyboards/input_club/k_type/k_type-rgbdriver.c
@@ -23,34 +23,34 @@
 
 static void init(void) {
     i2c_init(&I2CD1, I2C1_SCL_PIN, I2C1_SDA_PIN);
-    IS31FL3733_init(0, DRIVER_ADDR_1, 0);
+    is31fl3733_init(0, DRIVER_ADDR_1, 0);
 #    ifdef USE_I2C2
     i2c_init(&I2CD2, I2C2_SCL_PIN, I2C2_SDA_PIN);
-    IS31FL3733_init(1, DRIVER_ADDR_2, 0);
+    is31fl3733_init(1, DRIVER_ADDR_2, 0);
 #    endif
     for (int index = 0; index < RGB_MATRIX_LED_COUNT; index++) {
         bool enabled = true;
         // This only caches it for later
-        IS31FL3733_set_led_control_register(index, enabled, enabled, enabled);
+        is31fl3733_set_led_control_register(index, enabled, enabled, enabled);
     }
-    IS31FL3733_update_led_control_registers(DRIVER_ADDR_1, 0);
+    is31fl3733_update_led_control_registers(DRIVER_ADDR_1, 0);
 #    ifdef USE_I2C2
-    IS31FL3733_update_led_control_registers(DRIVER_ADDR_2, 1);
+    is31fl3733_update_led_control_registers(DRIVER_ADDR_2, 1);
 #    endif
 }
 
 static void flush(void) {
-    IS31FL3733_update_pwm_buffers(DRIVER_ADDR_1, 0);
+    is31fl3733_update_pwm_buffers(DRIVER_ADDR_1, 0);
 #    ifdef USE_I2C2
-    IS31FL3733_update_pwm_buffers(DRIVER_ADDR_2, 1);
+    is31fl3733_update_pwm_buffers(DRIVER_ADDR_2, 1);
 #    endif
 }
 
 const rgb_matrix_driver_t rgb_matrix_driver = {
     .init = init,
     .flush = flush,
-    .set_color = IS31FL3733_set_color,
-    .set_color_all = IS31FL3733_set_color_all,
+    .set_color = is31fl3733_set_color,
+    .set_color_all = is31fl3733_set_color_all,
 };
 
 #endif