Move encoder config to data driven (#19923)

Co-authored-by: Nick Brassel <nick@tzarc.org>

51 files changed, 149 insertions, 134 deletions

diff --git a/keyboards/handwired/amigopunk/config.h b/keyboards/handwired/amigopunk/config.h
index 78f8271f84..2cbbb3152a 100644
--- a/keyboards/handwired/amigopunk/config.h
+++ b/keyboards/handwired/amigopunk/config.h
@@ -24,12 +24,6 @@
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/* Encoder setup */
-#ifdef ENCODER_ENABLE
-#define ENCODERS_PAD_A { E0 }
-#define ENCODERS_PAD_B { E1 }
-#endif
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 
diff --git a/keyboards/handwired/amigopunk/info.json b/keyboards/handwired/amigopunk/info.json
index 2f98f2c755..e79911a676 100644
--- a/keyboards/handwired/amigopunk/info.json
+++ b/keyboards/handwired/amigopunk/info.json
@@ -8,6 +8,11 @@
         "pid": "0x1805",
         "device_version": "0.0.1"
     },
+    "encoder": {
+        "rotary": [
+            {"pin_a": "E0", "pin_b": "E1"}
+        ]
+    },
     "processor": "at90usb1286",
     "bootloader": "halfkay",
     "layouts": {
diff --git a/keyboards/handwired/bento/rev1/config.h b/keyboards/handwired/bento/rev1/config.h
index 497a2deb16..62c3144cc5 100644
--- a/keyboards/handwired/bento/rev1/config.h
+++ b/keyboards/handwired/bento/rev1/config.h
@@ -16,9 +16,6 @@
 
 #pragma once
 
-#define ENCODERS_PAD_A { D1 }
-#define ENCODERS_PAD_B { D0 }
-
 #define RGB_DI_PIN D3
 #ifdef RGB_DI_PIN
   #define RGBLED_NUM 4
diff --git a/keyboards/handwired/bento/rev1/info.json b/keyboards/handwired/bento/rev1/info.json
index 057931bb4e..5f7e673306 100644
--- a/keyboards/handwired/bento/rev1/info.json
+++ b/keyboards/handwired/bento/rev1/info.json
@@ -8,6 +8,11 @@
     "pid": "0xDAD3",
     "device_version": "1.0.0"
   },
+  "encoder": {
+    "rotary": [
+      {"pin_a": "D1", "pin_b": "D0"}
+    ]
+  },
   "processor": "atmega32u4",
   "bootloader": "caterina",
   "matrix_pins": {
diff --git a/keyboards/handwired/d48/config.h b/keyboards/handwired/d48/config.h
index 21f78e0645..23dbfa831c 100644
--- a/keyboards/handwired/d48/config.h
+++ b/keyboards/handwired/d48/config.h
@@ -40,11 +40,6 @@
 )
 #endif
 
-/* Encoders */
-#define ENCODERS_PAD_A { B3, A0 }
-#define ENCODERS_PAD_B { A6, A1 }
-/* #define ENCODER_RESOLUTION 4 */
-
 /* OLED */
 #define OLED_FONT_H "glcdfont_d48.c"
 #define OLED_TIMEOUT 0
diff --git a/keyboards/handwired/d48/info.json b/keyboards/handwired/d48/info.json
index 9da51d5959..c607f21937 100644
--- a/keyboards/handwired/d48/info.json
+++ b/keyboards/handwired/d48/info.json
@@ -8,6 +8,12 @@
         "pid": "0x6060",
         "device_version": "0.0.1"
     },
+    "encoder": {
+        "rotary": [
+            {"pin_a": "B3", "pin_b": "A6"},
+            {"pin_a": "A0", "pin_b": "A1"}
+        ]
+    },
     "processor": "STM32F303",
     "bootloader": "stm32-dfu",
     "board": "QMK_PROTON_C",
diff --git a/keyboards/handwired/dactylmacropad/config.h b/keyboards/handwired/dactylmacropad/config.h
index e69ceac331..a2a5455ab1 100644
--- a/keyboards/handwired/dactylmacropad/config.h
+++ b/keyboards/handwired/dactylmacropad/config.h
@@ -19,7 +19,4 @@
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
 
-#define ENCODERS_PAD_A { D1 }
-#define ENCODERS_PAD_B { D0 }
-#define ENCODER_RESOLUTION 4
 #define TAP_CODE_DELAY 100
diff --git a/keyboards/handwired/dactylmacropad/info.json b/keyboards/handwired/dactylmacropad/info.json
index b56174caa2..1f56982b6d 100644
--- a/keyboards/handwired/dactylmacropad/info.json
+++ b/keyboards/handwired/dactylmacropad/info.json
@@ -23,6 +23,11 @@
         "pid": "0x0000",
         "vid": "0xFEED"
     },
+    "encoder": {
+        "rotary": [
+            {"pin_a": "D1", "pin_b": "D0"}
+        ]
+    },
     "layouts": {
         "LAYOUT": {
             "layout": [
diff --git a/keyboards/handwired/daishi/config.h b/keyboards/handwired/daishi/config.h
index 6a5d485d7f..1fefa56fc6 100644
--- a/keyboards/handwired/daishi/config.h
+++ b/keyboards/handwired/daishi/config.h
@@ -34,10 +34,5 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/* Set up rotary encoder */
-#define ENCODERS_PAD_A { F1 }
-#define ENCODERS_PAD_B { F0 }
-#define ENCODER_RESOLUTION 2
-
 /* Set delay for tap_code on rotary encoder */
 #define TAP_CODE_DELAY 10
diff --git a/keyboards/handwired/daishi/info.json b/keyboards/handwired/daishi/info.json
index a28c885537..27671cc28a 100644
--- a/keyboards/handwired/daishi/info.json
+++ b/keyboards/handwired/daishi/info.json
@@ -8,6 +8,11 @@
         "pid": "0x0001",
         "device_version": "0.0.1"
     },
+    "encoder": {
+        "rotary": [
+            {"pin_a": "F1", "pin_b": "F0", "resolution": 2}
+        ]
+    },
     "processor": "at90usb1286",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/handwired/daskeyboard/daskeyboard4/info.json b/keyboards/handwired/daskeyboard/daskeyboard4/info.json
index 067450ae0b..900a66bb8b 100644
--- a/keyboards/handwired/daskeyboard/daskeyboard4/info.json
+++ b/keyboards/handwired/daskeyboard/daskeyboard4/info.json
@@ -39,8 +39,7 @@
         "rotary": [
             {
             "pin_a": "B13",
-            "pin_b": "B12",
-            "resolution": 4
+            "pin_b": "B12"
             }
         ]
     },
diff --git a/keyboards/handwired/dc/mc/001/config.h b/keyboards/handwired/dc/mc/001/config.h
index 7be4ba0aa9..4e9dfdea8c 100644
--- a/keyboards/handwired/dc/mc/001/config.h
+++ b/keyboards/handwired/dc/mc/001/config.h
@@ -18,16 +18,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #pragma once
 
 /*
-    RE_CHANNEL_A          = _BV(6),
-    RE_CHANNEL_B          = _BV(5),
-*/
-#define ENCODERS_PAD_A \
-    { B6 }
-#define ENCODERS_PAD_B \
-    { B5 }
-#define ENCODER_RESOLUTION 4
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/handwired/dc/mc/001/info.json b/keyboards/handwired/dc/mc/001/info.json
index 78c75f3713..852915569e 100644
--- a/keyboards/handwired/dc/mc/001/info.json
+++ b/keyboards/handwired/dc/mc/001/info.json
@@ -8,6 +8,11 @@
         "pid": "0x4D43",
         "device_version": "0.0.1"
     },
+    "encoder": {
+        "rotary": [
+            {"pin_a": "B6", "pin_b": "B5"}
+        ]
+    },
     "bootmagic": {
         "matrix": [0, 1]
     },
diff --git a/keyboards/handwired/ddg_56/config.h b/keyboards/handwired/ddg_56/config.h
index a9b3c12ef2..e46edef395 100644
--- a/keyboards/handwired/ddg_56/config.h
+++ b/keyboards/handwired/ddg_56/config.h
@@ -19,6 +19,3 @@
 
 #define MATRIX_ROW_PINS { B5, B15, B9, B10, A14 }
 #define MATRIX_COL_PINS { A2, B8, B13, B14, B4, B11, B12, A13, A15, A8, A7, A6, B0, B1 }
-
-#define ENCODERS_PAD_A { A1, B3 }
-#define ENCODERS_PAD_B { A0, B2 }
diff --git a/keyboards/handwired/ddg_56/info.json b/keyboards/handwired/ddg_56/info.json
index 2b7a8cfc43..f7253711e4 100644
--- a/keyboards/handwired/ddg_56/info.json
+++ b/keyboards/handwired/ddg_56/info.json
@@ -8,6 +8,12 @@
     "pid": "0xB195",
     "device_version": "0.0.1"
   },
+  "encoder": {
+    "rotary": [
+      {"pin_a": "A1", "pin_b": "A0"},
+      {"pin_a": "B3", "pin_b": "B2"}
+    ]
+  },
   "processor": "STM32F303",
   "bootloader": "stm32-dfu",
   "board": "QMK_PROTON_C",
diff --git a/keyboards/handwired/frankie_macropad/config.h b/keyboards/handwired/frankie_macropad/config.h
index 8045d59c67..577b27b372 100644
--- a/keyboards/handwired/frankie_macropad/config.h
+++ b/keyboards/handwired/frankie_macropad/config.h
@@ -49,6 +49,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 #define NO_ACTION_ONESHOT
-
-#define ENCODERS_PAD_A { D0, D2 }
-#define ENCODERS_PAD_B { D1, D3 }
diff --git a/keyboards/handwired/frankie_macropad/info.json b/keyboards/handwired/frankie_macropad/info.json
index 3ddf407549..24fb55f5da 100644
--- a/keyboards/handwired/frankie_macropad/info.json
+++ b/keyboards/handwired/frankie_macropad/info.json
@@ -8,6 +8,12 @@
         "pid": "0x0000",
         "device_version": "0.0.1"
     },
+    "encoder": {
+        "rotary": [
+            {"pin_a": "D0", "pin_b": "D1"},
+            {"pin_a": "D2", "pin_b": "D3"}
+        ]
+    },
     "bootmagic": {
         "matrix": [2, 0]
     },
diff --git a/keyboards/handwired/hnah108/config.h b/keyboards/handwired/hnah108/config.h
index a942bd253d..2face5fbed 100644
--- a/keyboards/handwired/hnah108/config.h
+++ b/keyboards/handwired/hnah108/config.h
@@ -34,9 +34,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-#define ENCODERS_PAD_A { B2 }
-#define ENCODERS_PAD_B { B3 }
-
 #define RGB_DI_PIN E2
 #define RGB_MATRIX_LED_COUNT 30
 // RGB Matrix Animation modes. Explicitly enabled
diff --git a/keyboards/handwired/hnah108/info.json b/keyboards/handwired/hnah108/info.json
index c9dcc020cc..116591fddf 100644
--- a/keyboards/handwired/hnah108/info.json
+++ b/keyboards/handwired/hnah108/info.json
@@ -8,6 +8,11 @@
         "pid": "0x0000",
         "device_version": "0.0.2"
     },
+    "encoder": {
+        "rotary": [
+            {"pin_a": "B2", "pin_b": "B3"}
+        ]
+    },
     "backlight": {
         "pin": "B7",
         "levels": 4,
diff --git a/keyboards/handwired/mutepad/config.h b/keyboards/handwired/mutepad/config.h
index 97ba13cd6a..9ebec0ffef 100644
--- a/keyboards/handwired/mutepad/config.h
+++ b/keyboards/handwired/mutepad/config.h
@@ -19,14 +19,6 @@
 #define MATRIX_COL_PINS \
     { B1, B3, B2, B6 }
 
-/* encoder support */
-#define ENCODERS_PAD_A \
-    { F4 }
-#define ENCODERS_PAD_B \
-    { F5 }
-
-#define ENCODER_RESOLUTION 2
-
 #define TAP_CODE_DELAY 10
 
 /* COL2ROW, ROW2COL */
diff --git a/keyboards/handwired/mutepad/info.json b/keyboards/handwired/mutepad/info.json
index 408ecffc51..6068f33b9d 100644
--- a/keyboards/handwired/mutepad/info.json
+++ b/keyboards/handwired/mutepad/info.json
@@ -8,6 +8,11 @@
         "pid": "0x0000",
         "device_version": "0.0.1"
     },
+    "encoder": {
+        "rotary": [
+            {"pin_a": "F4", "pin_b": "F5", "resolution": 2}
+        ]
+    },
     "processor": "atmega32u4",
     "bootloader": "caterina",
     "layouts": {
diff --git a/keyboards/handwired/obuwunkunubi/spaget/config.h b/keyboards/handwired/obuwunkunubi/spaget/config.h
index 7743cd6cd6..6a7baeba33 100644
--- a/keyboards/handwired/obuwunkunubi/spaget/config.h
+++ b/keyboards/handwired/obuwunkunubi/spaget/config.h
@@ -32,10 +32,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* Define encoder pins */
-#define ENCODERS_PAD_A { F5, F7 } // 1a, 2a
-#define ENCODERS_PAD_B { F4, F6 } // 1b, 2b
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
diff --git a/keyboards/handwired/obuwunkunubi/spaget/info.json b/keyboards/handwired/obuwunkunubi/spaget/info.json
index ed635d0208..8a205c6794 100644
--- a/keyboards/handwired/obuwunkunubi/spaget/info.json
+++ b/keyboards/handwired/obuwunkunubi/spaget/info.json
@@ -8,6 +8,12 @@
         "pid": "0x6969",
         "device_version": "0.0.1"
     },
+    "encoder": {
+        "rotary": [
+            {"pin_a": "F5", "pin_b": "F4"},
+            {"pin_a": "F7", "pin_b": "F6"}
+        ]
+    },
     "processor": "atmega32u4",
     "bootloader": "caterina",
     "layouts": {
diff --git a/keyboards/handwired/pill60/config.h b/keyboards/handwired/pill60/config.h
index d374143192..e96fba1db8 100644
--- a/keyboards/handwired/pill60/config.h
+++ b/keyboards/handwired/pill60/config.h
@@ -1,17 +1,17 @@
- /* Copyright 2020 Imam Rafii 
-  * 
-  * This program is free software: you can redistribute it and/or modify 
-  * it under the terms of the GNU General Public License as published by 
-  * the Free Software Foundation, either version 2 of the License, or 
-  * (at your option) any later version. 
-  * 
-  * This program is distributed in the hope that it will be useful, 
-  * but WITHOUT ANY WARRANTY; without even the implied warranty of 
-  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
-  * GNU General Public License for more details. 
-  * 
-  * You should have received a copy of the GNU General Public License 
-  * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
+ /* Copyright 2020 Imam Rafii
+  *
+  * This program is free software: you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License as published by
+  * the Free Software Foundation, either version 2 of the License, or
+  * (at your option) any later version.
+  *
+  * This program is distributed in the hope that it will be useful,
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  * GNU General Public License for more details.
+  *
+  * You should have received a copy of the GNU General Public License
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
   */
 #pragma once
 
@@ -20,10 +20,3 @@
 
 #define BACKLIGHT_PWM_DRIVER    PWMD5
 #define BACKLIGHT_PWM_CHANNEL   1
-
-/* Encoder */
-#define ENCODERS_PAD_A \
-    { B9 }
-#define ENCODERS_PAD_B \
-    { B8 }
-#define ENCODER_RESOLUTION 2
diff --git a/keyboards/handwired/pill60/info.json b/keyboards/handwired/pill60/info.json
index 891196f87b..5ab526ce67 100644
--- a/keyboards/handwired/pill60/info.json
+++ b/keyboards/handwired/pill60/info.json
@@ -8,6 +8,11 @@
         "pid": "0x5444",
         "device_version": "0.0.1"
     },
+    "encoder": {
+        "rotary": [
+            {"pin_a": "B9", "pin_b": "B8", "resolution": 2}
+        ]
+    },
     "backlight": {
         "driver": "software",
         "pin": "B14",
diff --git a/keyboards/handwired/prkl30/feather/config.h b/keyboards/handwired/prkl30/feather/config.h
index 5e94752e1b..a1b7295e32 100644
--- a/keyboards/handwired/prkl30/feather/config.h
+++ b/keyboards/handwired/prkl30/feather/config.h
@@ -20,9 +20,6 @@
 #define MATRIX_COL_PINS { D3, D1, B7, D6, C7, B6, B5, D7, C6, D0}
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
-#define ENCODERS_PAD_A { F7 }
-#define ENCODERS_PAD_B { F6 }
-#define ENCODER_RESOLUTION 4
 
 /* RGB Light Configuration */
 
diff --git a/keyboards/handwired/prkl30/feather/info.json b/keyboards/handwired/prkl30/feather/info.json
new file mode 100644
index 0000000000..8078ee0481
--- /dev/null
+++ b/keyboards/handwired/prkl30/feather/info.json
@@ -0,0 +1,7 @@
+{
+    "encoder": {
+        "rotary": [
+            {"pin_a": "F7", "pin_b": "F6"}
+        ]
+    }
+}
diff --git a/keyboards/handwired/prkl30/promicro/config.h b/keyboards/handwired/prkl30/promicro/config.h
index 6edad3bc5c..c3767088c7 100644
--- a/keyboards/handwired/prkl30/promicro/config.h
+++ b/keyboards/handwired/prkl30/promicro/config.h
@@ -20,9 +20,6 @@
 #define MATRIX_COL_PINS { B4, B5, F6, F5, F4, F7, B1, B3, B2, B6}
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
-#define ENCODERS_PAD_A { D3 }
-#define ENCODERS_PAD_B { D2 }
-#define ENCODER_RESOLUTION 4
 
 /* RGB Light Configuration */
 
diff --git a/keyboards/handwired/prkl30/promicro/info.json b/keyboards/handwired/prkl30/promicro/info.json
new file mode 100644
index 0000000000..a7ca847765
--- /dev/null
+++ b/keyboards/handwired/prkl30/promicro/info.json
@@ -0,0 +1,7 @@
+{
+    "encoder": {
+        "rotary": [
+            {"pin_a": "D3", "pin_b": "D2"}
+        ]
+    }
+}
\ No newline at end of file
diff --git a/keyboards/handwired/snatchpad/config.h b/keyboards/handwired/snatchpad/config.h
index 97de836d04..57d303a983 100644
--- a/keyboards/handwired/snatchpad/config.h
+++ b/keyboards/handwired/snatchpad/config.h
@@ -20,11 +20,6 @@
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/* Rotary encoder options */
-#define ENCODER_RESOLUTIONS { 4, 4 }
-#define ENCODERS_PAD_A { D3, D0 }
-#define ENCODERS_PAD_B { D2, D1 }
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/handwired/snatchpad/info.json b/keyboards/handwired/snatchpad/info.json
index da0221f474..a86091abfd 100644
--- a/keyboards/handwired/snatchpad/info.json
+++ b/keyboards/handwired/snatchpad/info.json
@@ -8,6 +8,12 @@
         "pid": "0x7370",
         "device_version": "0.0.1"
     },
+    "encoder": {
+        "rotary": [
+            {"pin_a": "D3", "pin_b": "D2"},
+            {"pin_a": "D0", "pin_b": "D1"}
+        ]
+    },
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/handwired/swiftrax/bumblebee/config.h b/keyboards/handwired/swiftrax/bumblebee/config.h
index f18b0fab89..c10291a82a 100644
--- a/keyboards/handwired/swiftrax/bumblebee/config.h
+++ b/keyboards/handwired/swiftrax/bumblebee/config.h
@@ -25,10 +25,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION ROW2COL
 
-/* Encoder */
-#define ENCODERS_PAD_A { C6 }
-#define ENCODERS_PAD_B { B6 }
-
 /* RGB Indicators */
 #define RGB_DI_PIN E6
 #define RGBLED_NUM 3
diff --git a/keyboards/handwired/swiftrax/bumblebee/info.json b/keyboards/handwired/swiftrax/bumblebee/info.json
index 887fc697af..2147a556c2 100644
--- a/keyboards/handwired/swiftrax/bumblebee/info.json
+++ b/keyboards/handwired/swiftrax/bumblebee/info.json
@@ -8,6 +8,11 @@
         "pid": "0xE881",
         "device_version": "0.0.1"
     },
+    "encoder": {
+        "rotary": [
+            {"pin_a": "C6", "pin_b": "B6"}
+        ]
+    },
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/handwired/swiftrax/digicarp65/config.h b/keyboards/handwired/swiftrax/digicarp65/config.h
index 6618b9fa83..80b735d0d8 100644
--- a/keyboards/handwired/swiftrax/digicarp65/config.h
+++ b/keyboards/handwired/swiftrax/digicarp65/config.h
@@ -25,6 +25,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
-
-#define ENCODERS_PAD_A { B3 }
-#define ENCODERS_PAD_B { B7 }
diff --git a/keyboards/handwired/swiftrax/digicarp65/info.json b/keyboards/handwired/swiftrax/digicarp65/info.json
index aba6fbd54d..2eef105756 100644
--- a/keyboards/handwired/swiftrax/digicarp65/info.json
+++ b/keyboards/handwired/swiftrax/digicarp65/info.json
@@ -8,6 +8,11 @@
         "pid": "0xE7F1",
         "device_version": "0.0.1"
     },
+    "encoder": {
+        "rotary": [
+            {"pin_a": "B3", "pin_b": "B7"}
+        ]
+    },
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "community_layouts": ["65_ansi", "65_ansi_split_bs", "65_iso", "65_iso_split_bs"],
diff --git a/keyboards/handwired/swiftrax/joypad/config.h b/keyboards/handwired/swiftrax/joypad/config.h
index 45d0d0bb70..2f54bc0c4e 100644
--- a/keyboards/handwired/swiftrax/joypad/config.h
+++ b/keyboards/handwired/swiftrax/joypad/config.h
@@ -23,9 +23,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROW_PINS { C6, B3, B0, B1, D6, D5 }
 #define MATRIX_COL_PINS { C7, B4, D0, C2 }
 
-#define ENCODERS_PAD_A { C5 }
-#define ENCODERS_PAD_B { C4 }
-
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
diff --git a/keyboards/handwired/swiftrax/joypad/info.json b/keyboards/handwired/swiftrax/joypad/info.json
index 9b3f094e85..bef5225bcd 100644
--- a/keyboards/handwired/swiftrax/joypad/info.json
+++ b/keyboards/handwired/swiftrax/joypad/info.json
@@ -8,6 +8,11 @@
         "pid": "0xEA68",
         "device_version": "0.0.1"
     },
+    "encoder": {
+        "rotary": [
+            {"pin_a": "C5", "pin_b": "C4"}
+        ]
+    },
     "processor": "atmega32u2",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/handwired/swiftrax/pandamic/config.h b/keyboards/handwired/swiftrax/pandamic/config.h
index b802e4782a..77daa76c24 100644
--- a/keyboards/handwired/swiftrax/pandamic/config.h
+++ b/keyboards/handwired/swiftrax/pandamic/config.h
@@ -23,10 +23,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROW_PINS { D1, D2, B5, B7, D3, D5, D6, D4, D7, B4 }
 #define MATRIX_COL_PINS { B6, C6, C7, F7, F6, F5, F4, F1, F0, D0 }
 
-#define ENCODERS_PAD_A { E6 }
-#define ENCODERS_PAD_B { B0 }
-
-
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION ROW2COL
 
diff --git a/keyboards/handwired/swiftrax/pandamic/info.json b/keyboards/handwired/swiftrax/pandamic/info.json
index b5d0ebd1ba..60fe2886f5 100644
--- a/keyboards/handwired/swiftrax/pandamic/info.json
+++ b/keyboards/handwired/swiftrax/pandamic/info.json
@@ -8,6 +8,11 @@
         "pid": "0xEB0E",
         "device_version": "0.0.1"
     },
+    "encoder": {
+        "rotary": [
+            {"pin_a": "E6", "pin_b": "B0"}
+        ]
+    },
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/handwired/swiftrax/walter/config.h b/keyboards/handwired/swiftrax/walter/config.h
index d58a3cbfb4..7bfee265ab 100644
--- a/keyboards/handwired/swiftrax/walter/config.h
+++ b/keyboards/handwired/swiftrax/walter/config.h
@@ -26,9 +26,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-#define ENCODERS_PAD_A { B3 }
-#define ENCODERS_PAD_B { B7 }
-
 #define RGB_DI_PIN E6
 #define RGBLED_NUM 24
 #define RGBLIGHT_EFFECT_BREATHING
diff --git a/keyboards/handwired/swiftrax/walter/info.json b/keyboards/handwired/swiftrax/walter/info.json
index 675da09c9c..88da47f36b 100644
--- a/keyboards/handwired/swiftrax/walter/info.json
+++ b/keyboards/handwired/swiftrax/walter/info.json
@@ -8,6 +8,11 @@
         "pid": "0xE964",
         "device_version": "0.0.1"
     },
+    "encoder": {
+        "rotary": [
+            {"pin_a": "B3", "pin_b": "B7"}
+        ]
+    },
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/config.h
index e4856c4eec..c52610e9d3 100644
--- a/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/config.h
+++ b/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/config.h
@@ -38,10 +38,5 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define EE_HANDS
 
-#define ENCODERS_PAD_A \
-    { D5 }
-#define ENCODERS_PAD_B \
-    { C7 }
-
 /* PMW33XX Settings */
 #define PMW33XX_CS_PIN B6
diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/info.json b/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/info.json
index 4fcfeed921..dabab602dd 100644
--- a/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/info.json
+++ b/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/info.json
@@ -1,5 +1,10 @@
 {
     "keyboard_name": "Tractyl Manuform (5x6) Elite-C",
+    "encoder": {
+        "rotary": [
+            {"pin_a": "D5", "pin_b": "C7"}
+        ]
+    },
     "split": {
         "soft_serial_pin": "D2"
     },
diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f303/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/f303/config.h
index f3f3fb7e22..d10cb0bd8b 100644
--- a/keyboards/handwired/tractyl_manuform/5x6_right/f303/config.h
+++ b/keyboards/handwired/tractyl_manuform/5x6_right/f303/config.h
@@ -70,12 +70,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define I2C1_SDA_PAL_MODE        4
 #define I2C1_CLOCK_SPEED         400000
 
-/* encoder config */
-#define ENCODERS_PAD_A \
-    { A7 }
-#define ENCODERS_PAD_B \
-    { A8 }
-
 /* spi config for eeprom and pmw3360 sensor */
 #define SPI_DRIVER                           SPID2
 #define SPI_SCK_PIN                          B13
diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f303/info.json b/keyboards/handwired/tractyl_manuform/5x6_right/f303/info.json
index 3ad29d36b8..bed70941bf 100644
--- a/keyboards/handwired/tractyl_manuform/5x6_right/f303/info.json
+++ b/keyboards/handwired/tractyl_manuform/5x6_right/f303/info.json
@@ -1,5 +1,10 @@
 {
     "keyboard_name": "Tractyl Manuform (5x6) Proton-C",
+    "encoder": {
+        "rotary": [
+            {"pin_a": "A7", "pin_b": "A8"}
+        ]
+    },
     "processor": "STM32F303",
     "bootloader": "stm32-dfu"
 }
diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h
index e93e70f569..227863aaa5 100644
--- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h
+++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h
@@ -76,12 +76,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define I2C1_CLOCK_SPEED  400000
 #define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_16_9
 
-/* encoder config */
-#define ENCODERS_PAD_A \
-    { A13 }
-#define ENCODERS_PAD_B \
-    { A14 }
-
 /* spi config for eeprom and pmw3360 sensor */
 #define SPI_DRIVER                           SPID1
 #define SPI_SCK_PIN                          A5
diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/info.json b/keyboards/handwired/tractyl_manuform/5x6_right/f411/info.json
index 9b81dc18eb..0791e50ebf 100644
--- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/info.json
+++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/info.json
@@ -1,5 +1,10 @@
 {
     "keyboard_name": "Tractyl Manuform (5x6) BlackPill",
+    "encoder": {
+        "rotary": [
+            {"pin_a": "A13", "pin_b": "A14"}
+        ]
+    },
     "processor": "STM32F411",
     "bootloader": "stm32-dfu",
     "board": "BLACKPILL_STM32_F411"
diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/config.h
index cae5b7fc14..51ff0d3123 100644
--- a/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/config.h
+++ b/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/config.h
@@ -42,10 +42,5 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define EE_HANDS
 
-#define ENCODERS_PAD_A \
-    { D5 }
-#define ENCODERS_PAD_B \
-    { D4 }
-
 /* PMW33XX Settings */
 #define PMW33XX_CS_PIN B0
diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/info.json b/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/info.json
index a7fb36c71e..7f60ae0edc 100644
--- a/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/info.json
+++ b/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/info.json
@@ -1,5 +1,10 @@
 {
     "keyboard_name": "Tractyl Manuform (5x6) Teensy 2.0++",
+    "encoder": {
+        "rotary": [
+            {"pin_a": "D5", "pin_b": "D4"}
+        ]
+    },
     "split": {
         "soft_serial_pin": "D2"
     },
diff --git a/keyboards/handwired/uthol/rev3/config.h b/keyboards/handwired/uthol/rev3/config.h
index dff88fb7c6..1e6b532e2a 100644
--- a/keyboards/handwired/uthol/rev3/config.h
+++ b/keyboards/handwired/uthol/rev3/config.h
@@ -25,14 +25,6 @@
 #define MATRIX_ROW_PINS \
     { A4, A3, A2, A1, A0 }
 
-
-// Encoder config
-#define ENCODERS_PAD_A \
-    { C15 }
-#define ENCODERS_PAD_B \
-    { C14 }
-#define ENCODER_RESOLUTION 2
-
 // OLED config
 #define OLED_DISPLAY_128X64
 #define OLED_DISPLAY_WIDTH 128
diff --git a/keyboards/handwired/uthol/rev3/info.json b/keyboards/handwired/uthol/rev3/info.json
index d95bbc9bca..b5d099b27a 100644
--- a/keyboards/handwired/uthol/rev3/info.json
+++ b/keyboards/handwired/uthol/rev3/info.json
@@ -3,6 +3,11 @@
     "usb": {
         "device_version": "0.0.3"
     },
+    "encoder": {
+        "rotary": [
+            {"pin_a": "C15", "pin_b": "C14", "resolution": 2}
+        ]
+    },
     "processor": "STM32F401",
     "bootloader": "stm32-dfu",
     "board": "BLACKPILL_STM32_F401"