diff options
| author | fauxpark <fauxpark@gmail.com> | 2019-12-12 06:33:10 +1100 |
|---|---|---|
| committer | Drashna Jaelre <drashna@live.com> | 2019-12-11 11:33:09 -0800 |
| commit | 770a4ee7291095aaa6548d3e988633bf2ae6e6c0 (patch) | |
| tree | 77f927d380d9f3b356c4a96dfa789980a26b47d2 /docs/faq_debug.md | |
| parent | ccda62616d422ae6df810b6fd68fc8e61002e278 (diff) | |
[Docs] Remove some outdated FAQ items (#7607)
Diffstat (limited to 'docs/faq_debug.md')
| -rw-r--r-- | docs/faq_debug.md | 68 |
1 files changed, 0 insertions, 68 deletions
diff --git a/docs/faq_debug.md b/docs/faq_debug.md index 1e0cdc82bf..6c66defbd4 100644 --- a/docs/faq_debug.md +++ b/docs/faq_debug.md @@ -112,56 +112,6 @@ In C `1` means one of [int] type which is [16 bit] in case of AVR so you can't s http://deskthority.net/workshop-f7/rebuilding-and-redesigning-a-classic-thinkpad-keyboard-t6181-60.html#p146279 - -## Bootloader Jump Doesn't Work -Properly configure bootloader size in **Makefile**. With wrong section size bootloader won't probably start with **Magic command** and **Boot Magic**. -``` -# Size of Bootloaders in bytes: -# Atmel DFU loader(ATmega32U4) 4096 -# Atmel DFU loader(AT90USB128) 8192 -# LUFA bootloader(ATmega32U4) 4096 -# Arduino Caterina(ATmega32U4) 4096 -# USBaspLoader(ATmega***) 2048 -# Teensy halfKay(ATmega32U4) 512 -# Teensy++ halfKay(AT90USB128) 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 -``` -AVR Boot section size are defined by setting **BOOTSZ** fuse in fact. Consult with your MCU datasheet. -Note that **Word**(2 bytes) size and address are used in datasheet while TMK uses **Byte**. - -AVR Boot section is located at end of Flash memory like the followings. -``` -byte Atmel/LUFA(ATMega32u4) byte Atmel(AT90SUB1286) -0x0000 +---------------+ 0x00000 +---------------+ - | | | | - | | | | - | Application | | Application | - | | | | - = = = = - | | 32KB-4KB | | 128KB-8KB -0x6000 +---------------+ 0x1E000 +---------------+ - | Bootloader | 4KB | Bootloader | 8KB -0x7FFF +---------------+ 0x1FFFF +---------------+ - - -byte Teensy(ATMega32u4) byte Teensy++(AT90SUB1286) -0x0000 +---------------+ 0x00000 +---------------+ - | | | | - | | | | - | Application | | Application | - | | | | - = = = = - | | 32KB-512B | | 128KB-2KB -0x7E00 +---------------+ 0x1FC00 +---------------+ - | Bootloader | 512B | Bootloader | 2KB -0x7FFF +---------------+ 0x1FFFF +---------------+ -``` - -And see this discussion for further reference. -https://github.com/tmk/tmk_keyboard/issues/179 - -If you are using a TeensyUSB, there is a [known bug](https://github.com/qmk/qmk_firmware/issues/164) in which the hardware reset button prevents the RESET key from working. Unplugging the keyboard and plugging it back in should resolve the problem. - ## Special Extra Key Doesn't Work (System, Audio Control Keys) You need to define `EXTRAKEY_ENABLE` in `rules.mk` to use them in QMK. @@ -194,24 +144,6 @@ If you would like to keep JTAG enabled, just add the following to your `config.h #define NO_JTAG_DISABLE ``` -## Adding LED Indicators of Lock Keys -You need your own LED indicators for CapsLock, ScrollLock and NumLock? See this post. - -http://deskthority.net/workshop-f7/tmk-keyboard-firmware-collection-t4478-120.html#p191560 - -## Program Arduino Micro/Leonardo -Push reset button and then run command like this within 8 seconds. - -``` -avrdude -patmega32u4 -cavr109 -b57600 -Uflash:w:adb_usb.hex -P/dev/ttyACM0 -``` - -Device name will vary depending on your system. - -http://arduino.cc/en/Main/ArduinoBoardMicro -https://geekhack.org/index.php?topic=14290.msg1563867#msg1563867 - - ## USB 3 Compatibility I heard some people have a problem with USB 3 port, try USB 2 port. |