# Keychron C1 white

![Keychron C1](https://i.imgur.com/oB9h56v.png)

A customizable TKL keyboard.

* Keyboard Maintainer(s): [SonixQMK](https://github.com/SonixQMK), [IsaacDynamo](https://github.com/IsaacDynamo), [noldevin](https://github.com/noldevin), [vjdato21](https://github.com/vjdato21)
* Hardware Supported: Keychron C1 white
* Hardware Availability: [Keychron](https://www.keychron.com/products/keychron-c1-wired-mechanical-keyboard)

# Install
1. If your keyboard currently has stock firmware installed, put your keyboard first into bootloader by shorting the boot pins found under the spacebar before plugging in your keyboard to the PC. Otherwise, press `Fn + Esc` to put your keyboard into bootloader.
1. Download and run [Sonix Flasher](https://github.com/SonixQMK/sonix-flasher/releases/tag/v0.2.1).
1. In Sonix Flasher, select `SN32F26x` under 'Device'. And select `0x00` as the qmk offset.
1. Click 'Flash QMK...' and flash jumploader-keychron_c1_white.bin. This can be found in 'Pre-Compiled Jumploaders' build by the latest [Sonix keyboard bootloader action](https://github.com/SonixQMK/sonix-keyboard-bootloader/actions).
1. In Sonix Flasher, select `SN32F26x` under 'Device'. And select `0x200` as the qmk offset.
1. Lastly, click 'Flash QMK...' and flash keychron_c1_white_default.bin. This can be found in 'Pre-Compiled Firmware' build by the latest [Sonix QMK firmware action](https://github.com/SonixQMK/qmk_firmware/actions).

# Keymapping
### Windows Mode
<details>

Without Fn | With Fn
---------- | -------
ESC | Reset keyboard
F1 | Decrease PC Brightness
F2 | Increase PC Brightness
F3 | Task View
F4 | File Explorer
F5 | Decrease KB Brightness
F6 | Increase KB Brightness
F7 | Previous Track
F8 | Play/Pause Track
F9 | Next Track
F10 | Mute
F11 | Decrease Volume
F12 | Increase Volume
Print Screen | Snip & Sketch
Cortana | -
Toggle backlight | -
↑ | Increase effect speed
← | Cycle through modes in reverse
↓ | Decrease effect speed
→ | Cycle through modes

</details>

### Mac Mode
<details>

Without Fn | With Fn
---------- | -------
ESC | Reset keyboard
F1 | Decrease PC Brightness
F2 | Increase PC Brightness
F3 | None
F4 | Finder
F5 | Decrease KB Brightness
F6 | Increase KB Brightness
F7 | Previous Track
F8 | Play/Pause Track
F9 | Next Track
F10 | Mute
F11 | Decrease Volume
F12 | Increase Volume
Take a screenshot (whole screen) | Take a screenshot (specific area)
Siri (hold down) | -
Toggle backlight | -
↑ | Increase effect speed
← | Cycle through modes in reverse
↓ | Decrease effect speed
→ | Cycle through modes

</details>

# More Info

Make example for this keyboard (after setting up your build environment):

    make keychron/c1/white

[Video](https://www.youtube.com/watch?v=aUiKHdI5Vk8) explaining installation for a similar keyboard.

For more info and detailed flashing instructions, please visit https://github.com/CanUnesi/QMK-on-K6#readme

See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).