From 62ba66d61821fec6a5ad3bdccdf738e15e082461 Mon Sep 17 00:00:00 2001 From: XScorpion2 Date: Fri, 10 May 2019 18:55:02 -0500 Subject: Cleanup/rgb matrix (#5811) * clean up rgb matrix extern usage Moved rgb matrix boiler plate into macros Rebased onto typing heatmap pr * Fixing the reversed frame buffer access in digital rain * Fixing digital rain & typing heatmap if keyreactive effects are not enabled * Apply suggestions from code review Co-Authored-By: Drashna Jaelre * Adding parenthesizes to DRIVER_LED_TOTAL where necessary * Updated docs * added notes about parentheses --- docs/feature_rgb_matrix.md | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'docs') diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index 1e43414676..e29433a4bf 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -30,9 +30,11 @@ Configure the hardware via your `config.h`: #define DRIVER_COUNT 2 #define DRIVER_1_LED_TOTAL 25 #define DRIVER_2_LED_TOTAL 24 -#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL +#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) ``` +!> Note the parentheses, this is so when `DRIVER_LED_TOTAL` is used in code and expanded, the values are added together before any additional math is applied to them. As an example, `rand() % (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)` will give very different results than `rand() % DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL`. + Currently only 2 drivers are supported, but it would be trivial to support all 4 combinations. Define these arrays listing all the LEDs in your `.c`: -- cgit 1.4.1 From fd23a0e909c8478f3d9103bce410548af2496f92 Mon Sep 17 00:00:00 2001 From: XScorpion2 Date: Fri, 10 May 2019 21:56:16 -0500 Subject: RGB Matrix Effects: Cycle Out to In & Cycle Out to In Dual (#5812) --- docs/feature_rgb_matrix.md | 4 ++++ quantum/rgb_matrix_animations/cycle_out_in_anim.h | 23 ++++++++++++++++++++++ .../rgb_matrix_animations/cycle_out_in_dual_anim.h | 23 ++++++++++++++++++++++ .../rgb_matrix_animations/rgb_matrix_effects.inc | 2 ++ 4 files changed, 52 insertions(+) create mode 100644 quantum/rgb_matrix_animations/cycle_out_in_anim.h create mode 100644 quantum/rgb_matrix_animations/cycle_out_in_dual_anim.h (limited to 'docs') diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index e29433a4bf..8347660dfe 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -197,6 +197,8 @@ enum rgb_matrix_effects { RGB_MATRIX_CYCLE_ALL, // Full keyboard solid hue cycling through full gradient RGB_MATRIX_CYCLE_LEFT_RIGHT, // Full gradient scrolling left to right RGB_MATRIX_CYCLE_UP_DOWN, // Full gradient scrolling top to bottom + RGB_MATRIX_CYCLE_OUT_IN, // Full gradient scrolling out to in + RGB_MATRIX_CYCLE_OUT_IN_DUAL, // Full dual gradients scrolling out to in RGB_MATRIX_RAINBOW_MOVING_CHEVRON, // Full gradent Chevron shapped scrolling left to right RGB_MATRIX_DUAL_BEACON, // Full gradient spinning around center of keyboard RGB_MATRIX_RAINBOW_BEACON, // Full tighter gradient spinning around center of keyboard @@ -236,6 +238,8 @@ You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `con |`#define DISABLE_RGB_MATRIX_CYCLE_ALL` |Disables `RGB_MATRIX_CYCLE_ALL` | |`#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT` |Disables `RGB_MATRIX_CYCLE_LEFT_RIGHT` | |`#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN` |Disables `RGB_MATRIX_CYCLE_UP_DOWN` | +|`#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN` |Disables `RGB_MATRIX_CYCLE_OUT_IN` | +|`#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL` |Disables `RGB_MATRIX_CYCLE_OUT_IN_DUAL` | |`#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON` |Disables `RGB_MATRIX_RAINBOW_MOVING_CHEVRON` | |`#define DISABLE_RGB_MATRIX_DUAL_BEACON` |Disables `RGB_MATRIX_DUAL_BEACON` | |`#define DISABLE_RGB_MATRIX_RAINBOW_BEACON` |Disables `RGB_MATRIX_RAINBOW_BEACON` | diff --git a/quantum/rgb_matrix_animations/cycle_out_in_anim.h b/quantum/rgb_matrix_animations/cycle_out_in_anim.h new file mode 100644 index 0000000000..dc9d09fd3f --- /dev/null +++ b/quantum/rgb_matrix_animations/cycle_out_in_anim.h @@ -0,0 +1,23 @@ +#ifndef DISABLE_RGB_MATRIX_CYCLE_OUT_IN +RGB_MATRIX_EFFECT(CYCLE_OUT_IN) +#ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS + +bool CYCLE_OUT_IN(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { 0, rgb_matrix_config.sat, rgb_matrix_config.val }; + uint8_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 4); + for (uint8_t i = led_min; i < led_max; i++) { + RGB_MATRIX_TEST_LED_FLAGS(); + int16_t dx = g_led_config.point[i].x - 112; + int16_t dy = g_led_config.point[i].y - 32; + uint8_t dist = sqrt16(dx * dx + dy * dy); + hsv.h = 3 * dist / 2 + time; + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS +#endif // DISABLE_RGB_MATRIX_CYCLE_OUT_IN diff --git a/quantum/rgb_matrix_animations/cycle_out_in_dual_anim.h b/quantum/rgb_matrix_animations/cycle_out_in_dual_anim.h new file mode 100644 index 0000000000..941e6b9a8a --- /dev/null +++ b/quantum/rgb_matrix_animations/cycle_out_in_dual_anim.h @@ -0,0 +1,23 @@ +#ifndef DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +RGB_MATRIX_EFFECT(CYCLE_OUT_IN_DUAL) +#ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS + +bool CYCLE_OUT_IN_DUAL(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { 0, rgb_matrix_config.sat, rgb_matrix_config.val }; + uint8_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 4); + for (uint8_t i = led_min; i < led_max; i++) { + RGB_MATRIX_TEST_LED_FLAGS(); + int16_t dx = 56 - abs8(g_led_config.point[i].x - 112); + int16_t dy = g_led_config.point[i].y - 32; + uint8_t dist = sqrt16(dx * dx + dy * dy); + hsv.h = 3 * dist + time; + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS +#endif // DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL diff --git a/quantum/rgb_matrix_animations/rgb_matrix_effects.inc b/quantum/rgb_matrix_animations/rgb_matrix_effects.inc index 9bc6454613..f05a415a58 100644 --- a/quantum/rgb_matrix_animations/rgb_matrix_effects.inc +++ b/quantum/rgb_matrix_animations/rgb_matrix_effects.inc @@ -7,6 +7,8 @@ #include "rgb_matrix_animations/cycle_left_right_anim.h" #include "rgb_matrix_animations/cycle_up_down_anim.h" #include "rgb_matrix_animations/rainbow_moving_chevron_anim.h" +#include "rgb_matrix_animations/cycle_out_in_anim.h" +#include "rgb_matrix_animations/cycle_out_in_dual_anim.h" #include "rgb_matrix_animations/dual_beacon_anim.h" #include "rgb_matrix_animations/rainbow_beacon_anim.h" #include "rgb_matrix_animations/rainbow_pinwheels_anim.h" -- cgit 1.4.1 From 7871a465d36d11c4f9216a9e862104e0e770c6f4 Mon Sep 17 00:00:00 2001 From: ymzcdg <49898694+ymzcdg@users.noreply.github.com> Date: Sun, 12 May 2019 00:22:16 +0800 Subject: translate docs into Mandarin Chinese (#5807) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit * translate newbs.md into Madarin Chinese translate newbs.md into Madarin Chinese * translate docs into Mandarin Chinese translate getting_started_github.md into Mandarin Chinese * translate getting_started_getting_help.md into Mandarin Chinese translate getting_started_getting_help.md into Mandarin Chinese * contributing.md to Chinese Personify QMK as a girl named Q酱 . It can make more developer read this document and contribute QMK. * getting_started_introduction.md to Chinese getting_started_introduction.md to Chinese * faq.md to Chinese faq.md to Chinese * crlf2lf getting_started_introduction.md ending line fix getting_started_introduction.md * crlf2lf contributing.md crlf2lf contributing.md --- docs/zh-cn/contributing.md | 205 +++++++++++++++++++++++++++++ docs/zh-cn/faq.md | 6 + docs/zh-cn/getting_started_getting_help.md | 15 +++ docs/zh-cn/getting_started_github.md | 59 +++++++++ docs/zh-cn/newbs.md | 23 ++++ 5 files changed, 308 insertions(+) create mode 100644 docs/zh-cn/contributing.md create mode 100644 docs/zh-cn/faq.md create mode 100644 docs/zh-cn/getting_started_getting_help.md create mode 100644 docs/zh-cn/getting_started_github.md create mode 100644 docs/zh-cn/newbs.md (limited to 'docs') diff --git a/docs/zh-cn/contributing.md b/docs/zh-cn/contributing.md new file mode 100644 index 0000000000..62b956b619 --- /dev/null +++ b/docs/zh-cn/contributing.md @@ -0,0 +1,205 @@ +# 如何做贡献 + +👍🎉 首先感谢各位百忙之中抽空阅读本文档，并为我们无私奉献。给您点赞啦！ 🎉👍 + +第三方的帮助让Q酱成长了许多呢，Q酱也从你们那学到了不少新东西。Q酱希望每一个想帮助我的人都能很方便的做出有用的贡献。在这里我给摩拳擦掌的你们写了一点引导，让你们的代码在不对我做重大改动的情况下都能成功的被采纳哦。 + +* [项目概况](#项目概况) +* [代码规范](#代码规范) +* [一般教程](#一般教程) +* [行为守则对于我来说有何意义?](#行为守则对于我来说有何意义?) + +## 这文章巨长无比不想读啊! 我就想问个问题而已! + +您要是想问关于Q酱的问题的话可以在[OLKB Subreddit](https://reddit.com/r/olkb)或者是[Discord](https://discord.gg/Uq7gcHh)随意问。 + +请记住: + +* 维护Q酱的小可爱有的时候可能会有点忙，不能及时回答您的问题，耐心等等，他们都是很nice的人呀。 +* 维护Q酱的人都是很无私的善良的人。无论是贡献代码还是回答问题，都是义务的。有时见到他们努力回答各种问题，解决各种BUG，Q酱也是很心疼的。 +* 您可以看看下面的教程，可以让您的问题浅显易懂，更容易回答： + * https://opensource.com/life/16/10/how-ask-technical-questions + * http://www.catb.org/esr/faqs/smart-questions.html + +# 项目概况 + +Q酱很大一部分是用C语言组成的，不过有一小部分特性是C++的。怎么说呢，都是我的一部分，两个我都爱。Q酱一般是在键盘上的嵌入式处理器那里工作的，尤其与AVR([LUFA](http://www.fourwalledcubicle.com/LUFA.php))和ARM ([ChibiOS](http://www.chibios.com))两小哥哥搭配，干活不累，嘻嘻。如果您精通Arduino的话您会发现很多熟悉的概念，但也有点不爽，因为您以前的经验可能没法用来帮助Q酱。 + + + +# Q酱，我在哪能帮助你嘞? + +您要是有问题的话可以 [提出一个issue](https://github.com/qmk/qmk_firmware/issues) 或 [在Discord上交流一下](https://discord.gg/Uq7gcHh). + +# Q酱，我如何帮助你? + +您以前是否没为开源贡献过代码，而又想知道帮助Q酱是怎么一回事? 稍安勿躁，咱给您总结一下！ + +0. 先注册一个 [GitHub](https://github.com) 账户。 +1. 做好一个你要贡献的布局，那就要 [找一个你想解决的问题](https://github.com/qmk/qmk_firmware/issues)，或者 [找一个你想添加的特性](https://github.com/qmk/qmk_firmware/issues?q=is%3Aopen+is%3Aissue+label%3Afeature)。 +2. 把关联着问题的仓库分叉（fork）到你的仓库。这样你在`你的GitHub用户名/qmk_firmware`就有一个仓库备份啦。 +3. 使用 `git clone https://github.com/此处添GitHub用户名/此处添仓库名.git`这个命令把仓库同步到你的电脑中。 +4. 您要是想开发一个新特性的话可以先创建一个issue和Q酱的维护者讨论一下您要做什么。 +5. 使用`git checkout -b 此处写分支名字（别用汉字）`命令来创建一个分支（branch）用于开发。 +6. 对要解决的问题或要添加的特性进行适当的更改。 +7. 使用 `git add 把改变的文件的目录写这里` 可以添加改变的文件内容到git用于管理工程状态的索引（快照）里。 +8. 使用 `git commit -m "这里写修改的相关信息"` 来描述你做出了什么修改。 +9. 使用 `git push origin 此处写分支名字`来把你的更改同步到GitHub库里（反正不是打篮球那个库里）。 +10. 提交一个[QMK 固件的pull request](https://github.com/qmk/qmk_firmware/pull/new/master)。 +11. 给你的pull request拟一个标题，包括简短的描述和问题或错误代码。比如, 你可以起一个这样的"Added more log outputting to resolve #4352"（最好用英语，毕竟Q酱的中文也不是那么的溜，有可能会看不懂中文）。 +12. 在描述（description）里面写你做了哪些更改，你的代码里还存在什么问题, 或者你想问维护的小可爱们的问题。你的your pull request有点小问题无伤大雅(本来也没有完美的代码嘛), 维护的小可爱们会竭尽全力帮您改进的！ +13. 维护人员审查代码可能需要一些时间。 +14. 维护人员会通知您要更改什么地方，然后您就按照建议改一改。 +15. 预祝您合并成功！ + +# 代码规范 + +其实也没有什么特别严格的规范啦，但是俗话说的好：没有规矩，不成方圆。您可以看一下您的要改动的代码周围的画风，然后保持队形。如果你感觉周围都不知道是什么牛鬼蛇神的话就看看下面的建议： + +* 我们用肆(4)个空格来缩进(软件中也可以设置到Tab键) +* 我们使用改良的1TBS(允许单行样式) + * 左大括号: 在开放性语句块那行的末尾 + * 右大括号: 和开放性语句块第一个字母对齐 + * Else If: 将右大括号放在行的开头，下一个左大括号放在同一行的结尾 + * 可选大括号: 可选大括号是必选的 + * 应该这样: if (condition) { return false; } + * 不应该这样: if (condition) return false; +* 建议使用C语言风格的注释: `/* */` + * 把注释想象成一个描述特征的故事 + * 充分使用注释来描述你为何这样修改 + * 有些公认的东西就不要写到注释里面了 + * 如果你不知道注释是否多余,看下面 +* 一般不要主动换行，主动换行的话每行不要超过76列 +* 要把 `#pragma once` 放到头文件的开始哦，抛弃老土的(`#ifndef THIS_FILE_H`, `#define THIS_FILE_H`, ..., `#endif`)吧 +* 下面两种预处理命令都可以用: `#ifdef DEFINED` 还有 `#if defined(DEFINED)` + * 以上那句对处女座不是很友好哈，处女座的朋友们就别纠结了，直接 `#if defined(DEFINED)` 。 + * 还有就是选好一种风格就一直用，一直用一直爽，不要朝三暮四, 除非你要变化到多重条件的 `#if`。 + * `#` 和 `if`要挨在一起哦，再让本空格在中间冒充电灯泡本空格会生气的。 + * 以下是缩进规则: + * 首先考虑可读性，强迫症的朋友们总想要保持代码的高一致性，这样可不好。 + * 保证文件已有风格不变。如果代码本来就是杂糅风格，那就见机行事，让你的修改更有意义些。 + * 其实你也可以在缩进的时候看看周围其他代码，然后范水模山，预处理命令可以有自己的缩进风格。 + +可以参照下面: + +```c +/* foo 的 Enums*/ +enum foo_state { + FOO_BAR, + FOO_BAZ, +}; + +/* 有返回值的情况 */ +int foo(void) { + if (some_condition) { + return FOO_BAR; + } else { + return -1; + } +} +``` + +# Clang-format的自动格式化 +[Clang-format](https://clang.llvm.org/docs/ClangFormat.html) 是LLVM的一部分，可以帮你自动格式化代码。我们给你准备好了一个适用于以上规范的配置文件，会帮你调整缩进和换行，你只需要写好括号就好。有了它，你再也不用担心调整代码格式太耗时，没有时间陪伴自己（虚构）的另一半了。 + +使用[LLVM 完整安装](http://llvm.org/builds/)可以在Windows上安装clang-format, Ubuntu用户要用`sudo apt install clang-format`。 + +命令行的朋友们, 加上 `-style=file`选项就会自动在QMK的根目录寻找.clang-format配置文件了。 + +VSCode用户, 标准的 C/C++ 插件就支持clang-format, 或者可以用[独立扩展](https://marketplace.visualstudio.com/items?itemName=LLVMExtensions.ClangFormat)也行。 + +有些东西(比如LAYOUT宏) 会被clang-format打乱，所以那些文件就别用clang-format了,这里就教您一个小窍门，在`// clang-format off` 和 `//clang-format on`之间装上会被搞乱的代码就好了。 + +# 一般教程 + +你可以给Q酱的不同部分添砖加瓦，但也要用不同的方法严谨检查。不论你修改哪里最好还是看看下边。 + +* 将PR（pull request）分成一个个的逻辑单元。 比如，不要一次将两个新特性PR出去。要添加的特性排好队，一个一个来。 +* 提交之前看一眼，`git diff --check`的空格一定要写对了 +* 确定你的代码能通过编译 + * 布局: 确定`make keyboard:your_new_keymap` 不返回错误 + * 键盘: 确定 `make keyboard:all` 不返回错误 + * 核心代码: 确定 `make all` 不返回错误 +* 提交的信息尽量明确。第一行写点简短介绍(每行不多于70个英文字母), 第二行空着,第三行和后面就要写些必要的细节了。最好用英文写，比如: + +``` +Adjust the fronzlebop for the kerpleplork + +The kerpleplork was intermittently failing with error code 23. The root cause was the fronzlebop setting, which causes the kerpleplork to activate every N iterations. + +Limited experimentation on the devices I have available shows that 7 is high enough to avoid confusing the kerpleplork, but I'd like to get some feedback from people with ARM devices to be sure. +``` + +## 文档 + +想帮助Q酱当然是先看文档最简单了。找到这个文档哪里错了然后改正它对于你来说超级简单! 我们也对有写文档能力的人求贤若渴，如果你是对的人[点这个](#Q酱，我在哪能帮助你嘞?)! + +文档呢，都静静的放在`qmk_firmware/docs` 目录里, 也或者您想为网页做贡献的话也是可以的哦。 + +在文档中附代码案例时, 先观察文档其他地方的命名规范。比如, 把enums的名字都改成像`my_layers`或者`my_keycodes`来防止名字不一致的enums被当作特务枪毙: + +```c +enum my_layers { + _FIRST_LAYER, + _SECOND_LAYER +}; + +enum my_keycodes { + FIRST_LAYER = SAFE_RANGE, + SECOND_LAYER +}; +``` + +## 布局 + +大多数QMK新手都从创建一个自己的布局开始。我们尽力保证布局规范宽松 (毕竟布局是个性的体现) 不过建议遵守以下准则，这样可以让别人更好理解你的代码 + +* 用 [模板](documentation_templates.md)写个`readme.md`。 +* 所有的布局PR都会被squash, 如果你想知道你的提交是怎么被squash的那你就自己来吧 +* 不要把新特性和布局一起PR。可以分别PR他们 +* 布局文件夹就不要放`Makefile`了，这个操作都过时啦 +* 更新文件头部的copyrights(看`%YOUR_NAME%`那) + +## 键盘 + +QMK的最终归宿是键盘。有些键盘是社区维护的，有一些是制作这些键盘的人维护的。`readme.md`会告诉你是谁维护了这个键盘，如果你对某个键盘有疑问，可以 [创建一个Issue](https://github.com/qmk/qmk_firmware/issues) 来问一问维护者。 + +我们建议你按下面的来操作: + +* 用[模板](documentation_templates.md)写`readme.md`。 +* 提交数量尽量合理，不然我们可就要把你的PR给squash了。 +* 不要把新特性和新键盘一起PR。可以分别PR他们 +* 用父文件夹的名字命名 `.c`/`.h`文件, 比如`/keyboards///.[ch]` +* 键盘文件夹就不要放`Makefile`了，这个操作都过时啦 +* 更新文件头部的copyrights(看`%YOUR_NAME%`那) + +## Quantum/TMK 核心 + +在您废寝忘食地开发Q酱新特性或者帮Q酱驱虫之前，一定要确保你的工作是有意义的。看看[了解QMK](understanding_qmk.md)你会对Q酱有更深的了解，这个文档将带你领略QMK的程序流程。现在你应该和维护团对谈谈来了解实现你想法的最佳方法了。一下渠道都可以： + +* [在Discord交流](https://discord.gg/Uq7gcHh) +* [建立一个Issue](https://github.com/qmk/qmk_firmware/issues/new) + +新特性和BUG的修复影响所有键盘。开发组也在翻修QMK。所以，在实施重大返修之前一定要讨论一下。如果你在没有事先与维护团队沟通的情况下提交了一个PR，而且你的选择与维护团队的计划方向不符，那你可能要面临大改了。 + +修复BUG或者开发新特性之前看看这个： + +* **默认不启用** - QMK运行的芯片多数内存有限，所以首要考虑的还应该是布局不要被破坏，于是特性默认是不启用的。你喜欢什么特性的话就打开它，如果你觉得有些特性应该默认开启或者你能帮助缩减代码，那就联系维护组吧。 +* **提交之前在本地编译** - 这个简直就是家喻户晓了，但是也确实需要编译啊！ 我们的Travis系统会发现一切问题，但是自己编译一下可要比在线等快多了。 +* **注意版本和芯片平台** - 有那么几个键盘有支持不同配置甚至是不同芯片的版本。试着写一个能AVR和ARM两个平台运行的特性，或者在不支持的平台自动禁用。 +* **解释你的新特性** - 在`docs/`写个文档, 你可以创建新文档或者写到现有文档中。如果你不把它记录下来，其他人就无法从你的努力中获益。 + +也可以看看以下建议： + +* 提交数量尽量合理，不然我们可就要把你的PR给squash了。 +* 不要把新特性、布局和键盘一起PR。可以分别PR他们。 +* 给你的特性写[单元测试](unit_testing.md)。 +* 你编辑的文件风格要一致，如果风格不明确或者是混搭风的，你就要先看看[代码规范](#代码规范)确认情况。 + +## 重构 + +为了保持QMK脉络清晰，Q酱打算深入规划重构一下自己，然后让合作者进行修改。如果你有重构的思路或建议[创建一个issue](https://github.com/qmk/qmk_firmware/issues), Q酱很乐意讨论一下怎么改进一下。 + +# 行为守则对于我来说有何意义? + +我们的[行为守则](https://github.com/qmk/qmk_firmware/blob/master/CODE_OF_CONDUCT.md) 是说明您有责任尊重和礼貌地对待项目中的每个人，无论他们的身份如何。 如果你是我们行为准则所描述的不当行为的受害者，我们将站在你这边，并按照行为准则对施暴者进行适当谴责。 diff --git a/docs/zh-cn/faq.md b/docs/zh-cn/faq.md new file mode 100644 index 0000000000..3d0b65c6fd --- /dev/null +++ b/docs/zh-cn/faq.md @@ -0,0 +1,6 @@ +# 常见问题 + +* [一般问题](faq_general.md) +* [构建和编译QMK](faq_build.md) +* [QMK调试和故障排除](faq_debug.md) +* [布局问题](faq_keymap.md) diff --git a/docs/zh-cn/getting_started_getting_help.md b/docs/zh-cn/getting_started_getting_help.md new file mode 100644 index 0000000000..cf770a7708 --- /dev/null +++ b/docs/zh-cn/getting_started_getting_help.md @@ -0,0 +1,15 @@ +# 获得帮助 + +有很多方法来获得关于QMK的帮助. + +## 实时聊天 + +你可以在我们的主要[Discord服务器](https://discord.gg/Uq7gcHh)找到QMK的开发者和用户。有很多讨论固件的不同频道, 工具箱(Toolbox), 硬件,配置工具(configurator). + +## OLKB Subreddit + +QMK的官方论坛是[/r/olkb](https://reddit.com/r/olkb) 在[reddit.com](https://reddit.com)上. + +## Github的Issue + +你可以在GitHub上 [提出issue](https://github.com/qmk/qmk_firmware/issues).当您的问题需要长期讨论或调试时，这尤其方便。 diff --git a/docs/zh-cn/getting_started_github.md b/docs/zh-cn/getting_started_github.md new file mode 100644 index 0000000000..0400eea643 --- /dev/null +++ b/docs/zh-cn/getting_started_github.md @@ -0,0 +1,59 @@ +# 如何在QMK中使用Github + +Github can be a little tricky to those that aren't familiar with it - this guide will walk through each step of forking, cloning, and submitting a pull request with QMK. + +?> 本教程假设您已安装GitHub，并且您喜欢使用命令行工作。 + +首先 [Github上的QMK页面](https://github.com/qmk/qmk_firmware), 您能看到右上方有个按钮写着"Fork": + +![从Github上分叉](http://i.imgur.com/8Toomz4.jpg) + +如果你是某组织成员，你将需要选择分叉到哪个账户。一般情况下, 你是想要分叉到你的私人账户下。当你完成分叉 (有时需要等一会), 点击"Clone or Download" 按钮: + +!从Github下载](http://i.imgur.com/N1NYcSz.jpg) + +你要选择 "HTTPS", 然后选择链接复制: + +![HTTPS链接](http://i.imgur.com/eGO0ohO.jpg) + +然后，在命令行输入`git clone `，然后粘贴你的链接: + +``` +user@computer:~$ git clone https://github.com/whoeveryouare/qmk_firmware.git +Cloning into 'qmk_firmware'... +remote: Counting objects: 46625, done. +remote: Compressing objects: 100% (2/2), done. +remote: Total 46625 (delta 0), reused 0 (delta 0), pack-reused 46623 +Receiving objects: 100% (46625/46625), 84.47 MiB | 3.14 MiB/s, done. +Resolving deltas: 100% (29362/29362), done. +Checking out files: 100% (2799/2799), done. +``` + +现在你本地计算机有QMK的分叉了,你可以添加你的布局了, 为你的键盘编译并刷新固件吧。如果你觉得你的修改很不错, 你可以添加,提交,然后想你的分叉推出（pull）你的改变，像这样: + +``` +user@computer:~$ git add . +user@computer:~$ git commit -m "adding my keymap" +[master cccb1608] adding my keymap + 1 file changed, 1 insertion(+) + create mode 100644 keyboards/planck/keymaps/mine/keymap.c +user@computer:~$ git push +Counting objects: 1, done. +Delta compression using up to 4 threads. +Compressing objects: 100% (1/1), done. +Writing objects: 100% (1/1), 1.64 KiB | 0 bytes/s, done. +Total 1 (delta 1), reused 0 (delta 0) +remote: Resolving deltas: 100% (1/1), completed with 1 local objects. +To https://github.com/whoeveryouare/qmk_firmware.git + + 20043e64...7da94ac5 master -> master +``` + +现在你的改动已经在你Github上的分支中了 - 如果你回到这 (`https://github.com/你的GitHub账户名/qmk_firmware`) ,你可以点击下方所示按钮创建 "New Pull Request": + +![新的 Pull Request](http://i.imgur.com/DxMHpJ8.jpg) + +现在你可以看到你所做的一切 - 如果看起来不错, 就可以点击 "Create Pull Request"定稿了: + +![创建Pull Request](http://i.imgur.com/Ojydlaj.jpg) + +提交后,我们会开跟你说你的改动,要求您进行更改, 并最终接受您的更改!感谢您为QMK做的贡献 :) diff --git a/docs/zh-cn/newbs.md b/docs/zh-cn/newbs.md new file mode 100644 index 0000000000..8c36b0d24b --- /dev/null +++ b/docs/zh-cn/newbs.md @@ -0,0 +1,23 @@ +# QMK菜鸟教程 + +QMK是为你机械硬盘设计的的一个强大的开源固件。使用QMK可以很简单的让你的定制键盘变得强大。看完这篇文章，无论你是菜鸟还是大佬，都可以顺利的使用QMK来定制键盘。 + +你是否为不知道你的键盘能不能运行QMK而苦恼? 如果你的机械键盘是你自己做的，那么这把键盘一般可以运行QMK。我们提供了[一大堆自制键盘](http://qmk.fm/keyboards/), 所以即便你的键盘不能运行QMK你也很容易能找到满足你需求的键盘。 + +## 概览 + +这个教程有7个主要部分： + +* [新手上路](newbs_getting_started.md) +* [用命令行构建你的第一个固件](newbs_building_firmware.md) +* [用在线界面构建你的第一个固件](newbs_building_firmware_configurator.md) +* [刷新固件](newbs_flashing.md) +* [测试和调试](newbs_testing_debugging.md) +* [Git最佳实践](newbs_best_practices.md) +* [其他学习资源](newbs_learn_more_resources.md) + +这份教程旨在帮助没有固件构建经验的人，也是根据该目的做出选择和建议。这些程序有很多替代方法，大部分替代我们都支持。如果你对完成一个任务有疑问，可以[向我们寻求帮助](getting_started_getting_help.md). + +## 其他资源 + +* [Thomas Baart的 QMK基础博客](https://thomasbaart.nl/category/mechanical-keyboards/firmware/qmk/qmk-basics/) – 这是一个用户创建的博客，涵盖了为新手准备的使用QMK的基础知识。 -- cgit 1.4.1 From c6184d2e7ed9695c22635431394e501b1d5e6271 Mon Sep 17 00:00:00 2001 From: XScorpion2 Date: Sun, 12 May 2019 00:20:14 -0500 Subject: Added check for event pressed to clear space cadet (#5839) * Added check for pressed to clear space cadet * Found some docs to update * Update docs/quantum_keycodes.md Co-Authored-By: fauxpark * Changes from PR --- docs/feature_space_cadet.md | 10 +++++----- docs/keycodes.md | 5 +++++ docs/quantum_keycodes.md | 7 ++++++- quantum/process_keycode/process_space_cadet.c | 12 +++++++----- 4 files changed, 23 insertions(+), 11 deletions(-) (limited to 'docs') diff --git a/docs/feature_space_cadet.md b/docs/feature_space_cadet.md index 5c375c5184..075578522e 100644 --- a/docs/feature_space_cadet.md +++ b/docs/feature_space_cadet.md @@ -20,7 +20,7 @@ Firstly, in your keymap, do one of the following: |`KC_RCPC` |Right Control when held, `)` when tapped | |`KC_LAPO` |Left Alt when held, `(` when tapped | |`KC_RAPC` |Right Alt when held, `)` when tapped | -|`KC_SFTENT`|Right Shift when held, `Enter` when tapped | +|`KC_SFTENT`|Right Shift when held, Enter when tapped | ## Caveats @@ -38,10 +38,10 @@ By default Space Cadet assumes a US ANSI layout, but if your layout uses differe |----------------|-------------------------------|---------------------------------------------------------------------------------| |`LSPO_KEYS` |`KC_LSFT, LSPO_MOD, LSPO_KEY` |Send `KC_LSFT` when held, the mod and key defined by `LSPO_MOD` and `LSPO_KEY`. | |`RSPC_KEYS` |`KC_RSFT, RSPC_MOD, RSPC_KEY` |Send `KC_RSFT` when held, the mod and key defined by `RSPC_MOD` and `RSPC_KEY`. | -|`LCPO_KEYS` |`KC_LCTL, KC_LCTL, KC_9` |Send `KC_LCTL` when held, the mod `KC_LCTL` with the key `KC_9` when tapped. | -|`RCPC_KEYS` |`KC_RCTL, KC_RCTL, KC_0` |Send `KC_RCTL` when held, the mod `KC_RCTL` with the key `KC_0` when tapped. | -|`LAPO_KEYS` |`KC_LALT, KC_LALT, KC_9` |Send `KC_LALT` when held, the mod `KC_LALT` with the key `KC_9` when tapped. | -|`RAPC_KEYS` |`KC_RALT, KC_RALT, KC_0` |Send `KC_RALT` when held, the mod `KC_RALT` with the key `KC_0` when tapped. | +|`LCPO_KEYS` |`KC_LCTL, KC_LSFT, KC_9` |Send `KC_LCTL` when held, the mod `KC_LSFT` with the key `KC_9` when tapped. | +|`RCPC_KEYS` |`KC_RCTL, KC_RSFT, KC_0` |Send `KC_RCTL` when held, the mod `KC_RSFT` with the key `KC_0` when tapped. | +|`LAPO_KEYS` |`KC_LALT, KC_LSFT, KC_9` |Send `KC_LALT` when held, the mod `KC_LSFT` with the key `KC_9` when tapped. | +|`RAPC_KEYS` |`KC_RALT, KC_RSFT, KC_0` |Send `KC_RALT` when held, the mod `KC_RSFT` with the key `KC_0` when tapped. | |`SFTENT_KEYS` |`KC_RSFT, KC_TRNS, SFTENT_KEY` |Send `KC_RSFT` when held, no mod with the key `SFTENT_KEY` when tapped. | diff --git a/docs/keycodes.md b/docs/keycodes.md index c0e6aa5c63..e9cfd34252 100644 --- a/docs/keycodes.md +++ b/docs/keycodes.md @@ -216,6 +216,11 @@ This is a reference only. Each group of keys links to the page documenting their |`KC_GESC` |`GRAVE_ESC`|Escape when tapped, ` when pressed with Shift or GUI| |`KC_LSPO` | |Left Shift when held, `(` when tapped | |`KC_RSPC` | |Right Shift when held, `)` when tapped | +|`KC_LCPO` | |Left Control when held, `(` when tapped | +|`KC_RCPC` | |Right Control when held, `)` when tapped | +|`KC_LAPO` | |Left Alt when held, `(` when tapped | +|`KC_RAPC` | |Right Alt when held, `)` when tapped | +|`KC_SFTENT` | |Right Shift when held, Enter when tapped | |`KC_LEAD` | |The [Leader key](feature_leader_key.md) | |`KC_LOCK` | |The [Lock key](feature_key_lock.md) | |`FUNC(n)` |`F(n)` |Call `fn_action(n)` (deprecated) | diff --git a/docs/quantum_keycodes.md b/docs/quantum_keycodes.md index 90192e6324..a2ba34c32d 100644 --- a/docs/quantum_keycodes.md +++ b/docs/quantum_keycodes.md @@ -1,6 +1,6 @@ # Quantum Keycodes -Quantum keycodes allow for easier customisation of your keymap than the basic ones provide, without having to define custom actions. +Quantum keycodes allow for easier customization of your keymap than the basic ones provide, without having to define custom actions. All keycodes within quantum are numbers between `0x0000` and `0xFFFF`. Within your `keymap.c` it may look like you have functions and other special cases, but ultimately the C preprocessor will translate those into a single 4 byte integer. QMK has reserved `0x0000` through `0x00FF` for standard keycodes. These are keycodes such as `KC_A`, `KC_1`, and `KC_LCTL`, which are basic keys defined in the USB HID specification. @@ -16,6 +16,11 @@ On this page we have documented keycodes between `0x00FF` and `0xFFFF` which are |`KC_GESC` |`GRAVE_ESC`|Escape when tapped, ` when pressed with Shift or GUI| |`KC_LSPO` | |Left Shift when held, `(` when tapped | |`KC_RSPC` | |Right Shift when held, `)` when tapped | +|`KC_LCPO` | |Left Control when held, `(` when tapped | +|`KC_RCPC` | |Right Control when held, `)` when tapped | +|`KC_LAPO` | |Left Alt when held, `(` when tapped | +|`KC_RAPC` | |Right Alt when held, `)` when tapped | +|`KC_SFTENT` | |Right Shift when held, Enter when tapped | |`KC_LEAD` | |The [Leader key](feature_leader_key.md) | |`KC_LOCK` | |The [Lock key](feature_key_lock.md) | |`FUNC(n)` |`F(n)` |Call `fn_action(n)` (deprecated) | diff --git a/quantum/process_keycode/process_space_cadet.c b/quantum/process_keycode/process_space_cadet.c index ac39df8089..089199eee2 100644 --- a/quantum/process_keycode/process_space_cadet.c +++ b/quantum/process_keycode/process_space_cadet.c @@ -60,18 +60,18 @@ // Control / paren setup #ifndef LCPO_KEYS - #define LCPO_KEYS KC_LCTL, KC_LCTL, KC_9 + #define LCPO_KEYS KC_LCTL, KC_LSFT, KC_9 #endif #ifndef RCPC_KEYS - #define RCPC_KEYS KC_RCTL, KC_RCTL, KC_0 + #define RCPC_KEYS KC_RCTL, KC_RSFT, KC_0 #endif // Alt / paren setup #ifndef LAPO_KEYS - #define LAPO_KEYS KC_LALT, KC_LALT, KC_9 + #define LAPO_KEYS KC_LALT, KC_LSFT, KC_9 #endif #ifndef RAPC_KEYS - #define RAPC_KEYS KC_RALT, KC_RALT, KC_0 + #define RAPC_KEYS KC_RALT, KC_RSFT, KC_0 #endif // Shift / Enter setup @@ -143,7 +143,9 @@ bool process_space_cadet(uint16_t keycode, keyrecord_t *record) { return false; } default: { - sc_last = 0; + if (record->event.pressed) { + sc_last = 0; + } break; } } -- cgit 1.4.1 From 670a9b7f83dacf2b0e9fb42756935a77598c6677 Mon Sep 17 00:00:00 2001 From: Takeshi ISHII <2170248+mtei@users.noreply.github.com> Date: Thu, 16 May 2019 13:11:28 +0900 Subject: Add effect range to rgblight.c (#5856) * add rgblight_set_effect_range() * implement effect range * Arrange the order of function list in rgblight.h . * update docs/feature_rgblight.md * fix RGBLIGHT_RAINBOW_SWIRL_RANGE default value * add example code about Utility Functions * add example code about direct operation functions * When RGBLIGHT_SPLIT is defined, the following function has no meaning and is invalidated. * rgblight_setrgb_master(r, g, b) * rgblight_setrgb_slave(r, g, b) * rgblight_sethsv_master(h, s, v) * rgblight_sethsv_slave(h, s, v) * add temporary test code for rgblight_set_effect_range * fix rgblight_effect_knight() bug * Test End. Revert "add temporary test code for rgblight_set_effect_range" This reverts commit 5680cddd012d68b2db75a532862a7fef250f8973. --- docs/feature_rgblight.md | 134 +++++++++++++++++++++++++++++++++-------------- quantum/rgblight.c | 117 +++++++++++++++++++++++------------------ quantum/rgblight.h | 123 +++++++++++++++++++++++++------------------ 3 files changed, 234 insertions(+), 140 deletions(-) (limited to 'docs') diff --git a/docs/feature_rgblight.md b/docs/feature_rgblight.md index 1e0ce91473..be4ddfa729 100644 --- a/docs/feature_rgblight.md +++ b/docs/feature_rgblight.md @@ -129,7 +129,7 @@ The following options are used to tweak the various animations: |`RGBLIGHT_EFFECT_KNIGHT_LED_NUM` |`RGBLED_NUM` |The number of LEDs to have the "Knight" animation travel | |`RGBLIGHT_EFFECT_KNIGHT_LENGTH` |`3` |The number of LEDs to light up for the "Knight" animation | |`RGBLIGHT_EFFECT_KNIGHT_OFFSET` |`0` |The number of LEDs to start the "Knight" animation from the start of the strip by | -|`RGBLIGHT_RAINBOW_SWIRL_RANGE` |`360` |Range adjustment for the rainbow swirl effect to get different swirls | +|`RGBLIGHT_RAINBOW_SWIRL_RANGE` |`255` |Range adjustment for the rainbow swirl effect to get different swirls | |`RGBLIGHT_EFFECT_SNAKE_LENGTH` |`4` |The number of LEDs to light up for the "Snake" animation | ### Example Usage to Reduce Memory Footprint @@ -176,44 +176,100 @@ const uint8_t RGBLED_GRADIENT_RANGES[] PROGMEM = {255, 170, 127, 85, 64}; If you need to change your RGB lighting in code, for example in a macro to change the color whenever you switch layers, QMK provides a set of functions to assist you. See [`rgblight.h`](https://github.com/qmk/qmk_firmware/blob/master/quantum/rgblight.h) for the full list, but the most commonly used functions include: -|Function |Description | -|--------------------------------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------| -|`rgblight_enable()` |Turn LEDs on, based on their previous state | -|`rgblight_enable_noeeprom()` |Turn LEDs on, based on their previous state (not written to EEPROM) | -|`rgblight_disable()` |Turn LEDs off | -|`rgblight_disable_noeeprom()` |Turn LEDs off (not written to EEPROM) | -|`rgblight_mode(x)` |Set the mode, if RGB animations are enabled | -|`rgblight_mode_noeeprom(x)` |Set the mode, if RGB animations are enabled (not written to EEPROM) | -|`rgblight_setrgb(r, g, b)` |Set all LEDs to the given RGB value where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM) | -|`rgblight_setrgb_at(r, g, b, led)` |Set a single LED to the given RGB value, where `r`/`g`/`b` are between 0 and 255 and `led` is between 0 and `RGBLED_NUM` (not written to EEPROM) | +### Utility Functions +|Function |Description | +|--------------------------------------------|-------------------------------------------------------------------| +|`sethsv(hue, sat, val, ledbuf)` |Set ledbuf to the given HSV value | +|`sethsv_raw(hue, sat, val, ledbuf)` |Set ledbuf to the given HSV value without RGBLIGHT_LIMIT_VAL check | +|`setrgb(r, g, b, ledbuf)` |Set ledbuf to the given RGB value where `r`/`g`/`b` | + +### Low level Functions +|Function |Description | +|--------------------------------------------|-------------------------------------------| +|`rgblight_set()` |Flash out led buffers to LEDs | +|`rgblight_set_clipping_range(pos, num)` |Set clipping Range. see [Clipping Range](#clipping-range) | + +Example: +```c +sethsv(HSV_WHITE, (LED_TYPE *)&led[0]); // led 0 +sethsv(HSV_RED, (LED_TYPE *)&led[1]); // led 1 +sethsv(HSV_GREEN, (LED_TYPE *)&led[2]); // led 2 +rgblight_set(); // Utility functions do not call rgblight_set() automatically, so they need to be called explicitly. +``` + +### Effects and Animations Functions +#### effect range setting +|Function |Description | +|--------------------------------------------|------------------| +|`rgblight_set_effect_range(pos, num)` |Set Effects Range | + +#### direct operation +|Function |Description | +|--------------------------------------------|-------------| +|`rgblight_setrgb_at(r, g, b, index)` |Set a single LED to the given RGB value, where `r`/`g`/`b` are between 0 and 255 and `index` is between 0 and `RGBLED_NUM` (not written to EEPROM) | +|`rgblight_sethsv_at(h, s, v, index)` |Set a single LED to the given HSV value, where `h`/`s`/`v` are between 0 and 255, and `index` is between 0 and `RGBLED_NUM` (not written to EEPROM) | |`rgblight_setrgb_range(r, g, b, start, end)`|Set a continuous range of LEDs to the given RGB value, where `r`/`g`/`b` are between 0 and 255 and `start`(included) and `stop`(excluded) are between 0 and `RGBLED_NUM` (not written to EEPROM)| -|`rgblight_setrgb_master(r, g, b)` |Set the LEDs on the master side to the given RGB value, where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM) | -|`rgblight_setrgb_slave(r, g, b)` |Set the LEDs on the slave side to the given RGB value, where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM) | -|`rgblight_sethsv(h, s, v)` |Set all LEDs to the given HSV value where `h` is between 0 and 360 and `s`/`v` are between 0 and 255 | -|`rgblight_sethsv_noeeprom(h, s, v)` |Set all LEDs to the given HSV value where `h` is between 0 and 360 and `s`/`v` are between 0 and 255 (not written to EEPROM) | -|`rgblight_sethsv_at(h, s, v, led)` |Set a single LED to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255, and `led` is between 0 and `RGBLED_NUM` (not written to EEPROM)| -|`rgblight_sethsv_range(h, s, v, start, end)`|Set a continuous range of LEDs to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255, and `start`(included) and `stop`(excluded) are between 0 and `RGBLED_NUM` (not written to EEPROM)| -|`rgblight_sethsv_master(h, s, v)` |Set the LEDs on the master side to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255 (not written to EEPROM) | -|`rgblight_sethsv_slave(h, s, v)` |Set the LEDs on the slave side to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255 (not written to EEPROM) | -|`rgblight_toggle()` |Toggle all LEDs between on and off | -|`rgblight_toggle_noeeprom()` |Toggle all LEDs between on and off (not written to EEPROM) | -|`rgblight_step()` |Change the mode to the next RGB animation in the list of enabled RGB animations | -|`rgblight_step_noeeprom()` |Change the mode to the next RGB animation in the list of enabled RGB animations (not written to EEPROM) | -|`rgblight_step_reverse()` |Change the mode to the previous RGB animation in the list of enabled RGB animations | -|`rgblight_step_reverse_noeeprom()` |Change the mode to the previous RGB animation in the list of enabled RGB animations (not written to EEPROM) | -|`rgblight_increase_hue()` |Increase the hue for all LEDs. This wraps around at maximum hue | -|`rgblight_increase_hue_noeeprom()` |Increase the hue for all LEDs. This wraps around at maximum hue (not written to EEPROM) | -|`rgblight_decrease_hue()` |Decrease the hue for all LEDs. This wraps around at minimum hue | -|`rgblight_decrease_hue_noeeprom()` |Decrease the hue for all LEDs. This wraps around at minimum hue (not written to EEPROM) | -|`rgblight_increase_sat()` |Increase the saturation for all LEDs. This wraps around at maximum saturation | -|`rgblight_increase_sat_noeeprom()` |Increase the saturation for all LEDs. This wraps around at maximum saturation (not written to EEPROM) | -|`rgblight_decrease_sat()` |Decrease the saturation for all LEDs. This wraps around at minimum saturation | -|`rgblight_decrease_sat_noeeprom()` |Decrease the saturation for all LEDs. This wraps around at minimum saturation (not written to EEPROM) | -|`rgblight_increase_val()` |Increase the value for all LEDs. This wraps around at maximum value | -|`rgblight_increase_val_noeeprom()` |Increase the value for all LEDs. This wraps around at maximum value (not written to EEPROM) | -|`rgblight_decrease_val()` |Decrease the value for all LEDs. This wraps around at minimum value | -|`rgblight_decrease_val_noeeprom()` |Decrease the value for all LEDs. This wraps around at minimum value (not written to EEPROM) | -|`rgblight_set_clipping_range(pos, num)` |Set clipping Range | +|`rgblight_sethsv_range(h, s, v, start, end)`|Set a continuous range of LEDs to the given HSV value, where `h`/`s`/`v` are between 0 and 255, and `start`(included) and `stop`(excluded) are between 0 and `RGBLED_NUM` (not written to EEPROM)| +|`rgblight_setrgb(r, g, b)` |Set effect range LEDs to the given RGB value where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM) | +|`rgblight_setrgb_master(r, g, b)` |Set the LEDs on the master side to the given RGB value, where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM) | +|`rgblight_setrgb_slave(r, g, b)` |Set the LEDs on the slave side to the given RGB value, where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM) | +|`rgblight_sethsv_master(h, s, v)` |Set the LEDs on the master side to the given HSV value, where `h`/`s`/`v` are between 0 and 255 (not written to EEPROM) | +|`rgblight_sethsv_slave(h, s, v)` |Set the LEDs on the slave side to the given HSV value, where `h`/`s`/`v` are between 0 and 255 (not written to EEPROM) | + +Example: +```c +rgblight_sethsv(HSV_WHITE, 0); // led 0 +rgblight_sethsv(HSV_RED, 1); // led 1 +rgblight_sethsv(HSV_GREEN, 2); // led 2 +// The above functions automatically calls rgblight_set(), so there is no need to call it explicitly. +// Note that it is inefficient to call repeatedly. +``` + +#### effect mode change +|Function |Description | +|--------------------------------------------|-------------| +|`rgblight_mode(x)` |Set the mode, if RGB animations are enabled | +|`rgblight_mode_noeeprom(x)` |Set the mode, if RGB animations are enabled (not written to EEPROM) | +|`rgblight_step()` |Change the mode to the next RGB animation in the list of enabled RGB animations | +|`rgblight_step_noeeprom()` |Change the mode to the next RGB animation in the list of enabled RGB animations (not written to EEPROM) | +|`rgblight_step_reverse()` |Change the mode to the previous RGB animation in the list of enabled RGB animations | +|`rgblight_step_reverse_noeeprom()` |Change the mode to the previous RGB animation in the list of enabled RGB animations (not written to EEPROM) | + +#### effects mode disable/enable +|Function |Description | +|--------------------------------------------|-------------| +|`rgblight_toggle()` |Toggle effect range LEDs between on and off | +|`rgblight_toggle_noeeprom()` |Toggle effect range LEDs between on and off (not written to EEPROM) | +|`rgblight_enable()` |Turn effect range LEDs on, based on their previous state | +|`rgblight_enable_noeeprom()` |Turn effect range LEDs on, based on their previous state (not written to EEPROM) | +|`rgblight_disable()` |Turn effect range LEDs off | +|`rgblight_disable_noeeprom()` |Turn effect range LEDs off (not written to EEPROM) | + +#### hue, sat, val change +|Function |Description | +|--------------------------------------------|-------------| +|`rgblight_increase_hue()` |Increase the hue for effect range LEDs. This wraps around at maximum hue | +|`rgblight_increase_hue_noeeprom()` |Increase the hue for effect range LEDs. This wraps around at maximum hue (not written to EEPROM) | +|`rgblight_decrease_hue()` |Decrease the hue for effect range LEDs. This wraps around at minimum hue | +|`rgblight_decrease_hue_noeeprom()` |Decrease the hue for effect range LEDs. This wraps around at minimum hue (not written to EEPROM) | +|`rgblight_increase_sat()` |Increase the saturation for effect range LEDs. This wraps around at maximum saturation | +|`rgblight_increase_sat_noeeprom()` |Increase the saturation for effect range LEDs. This wraps around at maximum saturation (not written to EEPROM) | +|`rgblight_decrease_sat()` |Decrease the saturation for effect range LEDs. This wraps around at minimum saturation | +|`rgblight_decrease_sat_noeeprom()` |Decrease the saturation for effect range LEDs. This wraps around at minimum saturation (not written to EEPROM) | +|`rgblight_increase_val()` |Increase the value for effect range LEDs. This wraps around at maximum value | +|`rgblight_increase_val_noeeprom()` |Increase the value for effect range LEDs. This wraps around at maximum value (not written to EEPROM) | +|`rgblight_decrease_val()` |Decrease the value for effect range LEDs. This wraps around at minimum value | +|`rgblight_decrease_val_noeeprom()` |Decrease the value for effect range LEDs. This wraps around at minimum value (not written to EEPROM) | +|`rgblight_sethsv(h, s, v)` |Set effect range LEDs to the given HSV value where `h`/`s`/`v` are between 0 and 255 | +|`rgblight_sethsv_noeeprom(h, s, v)` |Set effect range LEDs to the given HSV value where `h`/`s`/`v` are between 0 and 255 (not written to EEPROM) | + +#### query +|Function |Description | +|-----------------------|-----------------| +|`rgblight_get_mode()` |Get current mode | +|`rgblight_get_hue()` |Get current hue | +|`rgblight_get_sat()` |Get current sat | +|`rgblight_get_val()` |Get current val | ## Colors @@ -324,4 +380,6 @@ In addition to setting the Clipping Range, you can use `RGBLIGHT_LED_MAP` togeth ``` clip mapped +## Hardware Modification + If your keyboard lacks onboard underglow LEDs, you may often be able to solder on an RGB LED strip yourself. You will need to find an unused pin to wire to the data pin of your LED strip. Some keyboards may break out unused pins from the MCU to make soldering easier. The other two pins, VCC and GND, must also be connected to the appropriate power pins. diff --git a/quantum/rgblight.c b/quantum/rgblight.c index 77772e2925..75e4ef0d86 100644 --- a/quantum/rgblight.c +++ b/quantum/rgblight.c @@ -101,19 +101,35 @@ LED_TYPE led[RGBLED_NUM]; static uint8_t clipping_start_pos = 0; static uint8_t clipping_num_leds = RGBLED_NUM; +static uint8_t effect_start_pos = 0; +static uint8_t effect_end_pos = RGBLED_NUM; +static uint8_t effect_num_leds = RGBLED_NUM; void rgblight_set_clipping_range(uint8_t start_pos, uint8_t num_leds) { clipping_start_pos = start_pos; clipping_num_leds = num_leds; } +void rgblight_set_effect_range(uint8_t start_pos, uint8_t num_leds) { + if (start_pos >= RGBLED_NUM) return; + if (start_pos + num_leds > RGBLED_NUM) return; + effect_start_pos = start_pos; + effect_end_pos = start_pos + num_leds; + effect_num_leds = num_leds; +} -void sethsv(uint8_t hue, uint8_t sat, uint8_t val, LED_TYPE *led1) { - HSV hsv = { hue, sat, val > RGBLIGHT_LIMIT_VAL ? RGBLIGHT_LIMIT_VAL : val }; +void sethsv_raw(uint8_t hue, uint8_t sat, uint8_t val, LED_TYPE *led1) { + HSV hsv = { hue, sat, val }; RGB rgb = hsv_to_rgb(hsv); setrgb(rgb.r, rgb.g, rgb.b, led1); } +void sethsv(uint8_t hue, uint8_t sat, uint8_t val, LED_TYPE *led1) { + sethsv_raw( hue, sat, + val > RGBLIGHT_LIMIT_VAL ? RGBLIGHT_LIMIT_VAL : val, + led1); +} + void setrgb(uint8_t r, uint8_t g, uint8_t b, LED_TYPE *led1) { (*led1).r = r; (*led1).g = g; @@ -501,15 +517,15 @@ void rgblight_sethsv_eeprom_helper(uint8_t hue, uint8_t sat, uint8_t val, bool w #else uint8_t range = RGBLED_GRADIENT_RANGES[delta / 2]; #endif - for (uint8_t i = 0; i < RGBLED_NUM; i++) { - uint8_t _hue = ((uint16_t)i * (uint16_t)range) / RGBLED_NUM; + for (uint8_t i = 0; i < effect_num_leds; i++) { + uint8_t _hue = ((uint16_t)i * (uint16_t)range) / effect_num_leds; if (direction) { _hue = hue + _hue; } else { _hue = hue - _hue; } dprintf("rgblight rainbow set hsv: %d,%d,%d,%u\n", i, _hue, direction, range); - sethsv(_hue, sat, val, (LED_TYPE *)&led[i]); + sethsv(_hue, sat, val, (LED_TYPE *)&led[i + effect_start_pos]); } rgblight_set(); } @@ -557,7 +573,7 @@ uint8_t rgblight_get_val(void) { void rgblight_setrgb(uint8_t r, uint8_t g, uint8_t b) { if (!rgblight_config.enable) { return; } - for (uint8_t i = 0; i < RGBLED_NUM; i++) { + for (uint8_t i = effect_start_pos; i < effect_end_pos; i++) { led[i].r = r; led[i].g = g; led[i].b = b; @@ -615,6 +631,7 @@ void rgblight_sethsv_range(uint8_t hue, uint8_t sat, uint8_t val, uint8_t start, rgblight_setrgb_range(tmp_led.r, tmp_led.g, tmp_led.b, start, end); } +#ifndef RGBLIGHT_SPLIT void rgblight_setrgb_master(uint8_t r, uint8_t g, uint8_t b) { rgblight_setrgb_range(r, g, b, 0 , (uint8_t) RGBLED_NUM/2); } @@ -630,36 +647,34 @@ void rgblight_sethsv_master(uint8_t hue, uint8_t sat, uint8_t val) { void rgblight_sethsv_slave(uint8_t hue, uint8_t sat, uint8_t val) { rgblight_sethsv_range(hue, sat, val, (uint8_t) RGBLED_NUM/2, (uint8_t) RGBLED_NUM); } +#endif // ifndef RGBLIGHT_SPLIT #ifndef RGBLIGHT_CUSTOM_DRIVER void rgblight_set(void) { - LED_TYPE *start_led = led + clipping_start_pos; + LED_TYPE *start_led; uint16_t num_leds = clipping_num_leds; - if (rgblight_config.enable) { - #ifdef RGBLIGHT_LED_MAP - LED_TYPE led0[RGBLED_NUM]; - for(uint8_t i = 0; i < RGBLED_NUM; i++) { - led0[i] = led[pgm_read_byte(&led_map[i])]; - } - start_led = led0 + clipping_start_pos; - #endif - #ifdef RGBW - ws2812_setleds_rgbw(start_led, num_leds); - #else - ws2812_setleds(start_led, num_leds); - #endif - } else { - for (uint8_t i = 0; i < RGBLED_NUM; i++) { + + if (!rgblight_config.enable) { + for (uint8_t i = effect_start_pos; i < effect_end_pos; i++) { led[i].r = 0; led[i].g = 0; led[i].b = 0; } - #ifdef RGBW - ws2812_setleds_rgbw(start_led, num_leds); - #else - ws2812_setleds(start_led, num_leds); - #endif } +#ifdef RGBLIGHT_LED_MAP + LED_TYPE led0[RGBLED_NUM]; + for(uint8_t i = 0; i < RGBLED_NUM; i++) { + led0[i] = led[pgm_read_byte(&led_map[i])]; + } + start_led = led0 + clipping_start_pos; +#else + start_led = led + clipping_start_pos; +#endif +#ifdef RGBW + ws2812_setleds_rgbw(start_led, num_leds); +#else + ws2812_setleds(start_led, num_leds); +#endif } #endif @@ -926,9 +941,9 @@ void rgblight_effect_rainbow_swirl(animation_status_t *anim) { uint8_t hue; uint8_t i; - for (i = 0; i < RGBLED_NUM; i++) { - hue = (RGBLIGHT_RAINBOW_SWIRL_RANGE / RGBLED_NUM * i + anim->current_hue); - sethsv(hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&led[i]); + for (i = 0; i < effect_num_leds; i++) { + hue = (RGBLIGHT_RAINBOW_SWIRL_RANGE / effect_num_leds * i + anim->current_hue); + sethsv(hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&led[i + effect_start_pos]); } rgblight_set(); @@ -957,7 +972,7 @@ void rgblight_effect_snake(animation_status_t *anim) { #if defined(RGBLIGHT_SPLIT) && !defined(RGBLIGHT_SPLIT_NO_ANIMATION_SYNC) if (anim->pos == 0) { // restart signal if (increment == 1) { - pos = RGBLED_NUM - 1; + pos = effect_num_leds - 1; } else { pos = 0; } @@ -965,26 +980,27 @@ void rgblight_effect_snake(animation_status_t *anim) { } #endif - for (i = 0; i < RGBLED_NUM; i++) { - led[i].r = 0; - led[i].g = 0; - led[i].b = 0; + for (i = 0; i < effect_num_leds; i++) { + LED_TYPE *ledp = led + i + effect_start_pos; + ledp->r = 0; + ledp->g = 0; + ledp->b = 0; for (j = 0; j < RGBLIGHT_EFFECT_SNAKE_LENGTH; j++) { k = pos + j * increment; if (k < 0) { - k = k + RGBLED_NUM; + k = k + effect_num_leds; } if (i == k) { sethsv(rgblight_config.hue, rgblight_config.sat, (uint8_t)(rgblight_config.val*(RGBLIGHT_EFFECT_SNAKE_LENGTH-j)/RGBLIGHT_EFFECT_SNAKE_LENGTH), - (LED_TYPE *)&led[i]); + ledp); } } } rgblight_set(); if (increment == 1) { if (pos - 1 < 0) { - pos = RGBLED_NUM - 1; + pos = effect_num_leds - 1; #if defined(RGBLIGHT_SPLIT) && !defined(RGBLIGHT_SPLIT_NO_ANIMATION_SYNC) anim->pos = 0; #endif @@ -995,7 +1011,7 @@ void rgblight_effect_snake(animation_status_t *anim) { #endif } } else { - pos = (pos + 1) % RGBLED_NUM; + pos = (pos + 1) % effect_num_leds; #if defined(RGBLIGHT_SPLIT) && !defined(RGBLIGHT_SPLIT_NO_ANIMATION_SYNC) anim->pos = pos; #endif @@ -1023,14 +1039,14 @@ void rgblight_effect_knight(animation_status_t *anim) { } #endif // Set all the LEDs to 0 - for (i = 0; i < RGBLED_NUM; i++) { + for (i = effect_start_pos; i < effect_end_pos; i++) { led[i].r = 0; led[i].g = 0; led[i].b = 0; } // Determine which LEDs should be lit up for (i = 0; i < RGBLIGHT_EFFECT_KNIGHT_LED_NUM; i++) { - cur = (i + RGBLIGHT_EFFECT_KNIGHT_OFFSET) % RGBLED_NUM; + cur = (i + RGBLIGHT_EFFECT_KNIGHT_OFFSET) % effect_num_leds + effect_start_pos; if (i >= low_bound && i <= high_bound) { sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&led[cur]); @@ -1064,9 +1080,9 @@ void rgblight_effect_christmas(animation_status_t *anim) { uint8_t i; anim->current_offset = (anim->current_offset + 1) % 2; - for (i = 0; i < RGBLED_NUM; i++) { + for (i = 0; i < effect_num_leds; i++) { hue = 0 + ((i/RGBLIGHT_EFFECT_CHRISTMAS_STEP + anim->current_offset) % 2) * 85; - sethsv(hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&led[i]); + sethsv(hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&led[i + effect_start_pos]); } rgblight_set(); } @@ -1099,13 +1115,14 @@ void rgblight_effect_rgbtest(animation_status_t *anim) { #ifdef RGBLIGHT_EFFECT_ALTERNATING void rgblight_effect_alternating(animation_status_t *anim) { - for(int i = 0; ipos){ - sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&led[i]); - }else if (i>=RGBLED_NUM/2 && !anim->pos){ - sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&led[i]); - }else{ - sethsv(rgblight_config.hue, rgblight_config.sat, 0, (LED_TYPE *)&led[i]); + for (int i = 0; i < effect_num_leds; i++) { + LED_TYPE *ledp = led + i + effect_start_pos; + if (ipos) { + sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val, ledp); + } else if (i>=effect_num_leds/2 && !anim->pos) { + sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val, ledp); + } else { + sethsv(rgblight_config.hue, rgblight_config.sat, 0, ledp); } } rgblight_set(); diff --git a/quantum/rgblight.h b/quantum/rgblight.h index 35d7942ca6..064522a2b0 100644 --- a/quantum/rgblight.h +++ b/quantum/rgblight.h @@ -99,7 +99,7 @@ enum RGBLIGHT_EFFECT_MODE { #endif #ifndef RGBLIGHT_EFFECT_KNIGHT_LED_NUM -#define RGBLIGHT_EFFECT_KNIGHT_LED_NUM RGBLED_NUM +#define RGBLIGHT_EFFECT_KNIGHT_LED_NUM (effect_num_leds) #endif #ifndef RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL @@ -170,61 +170,79 @@ typedef struct _rgblight_status_t { #endif } rgblight_status_t; -#ifdef RGBLIGHT_SPLIT - #define RGBLIGHT_STATUS_CHANGE_MODE (1<<0) - #define RGBLIGHT_STATUS_CHANGE_HSVS (1<<1) - #define RGBLIGHT_STATUS_CHANGE_TIMER (1<<2) - #define RGBLIGHT_STATUS_ANIMATION_TICK (1<<3) +/* === Utility Functions ===*/ +void sethsv(uint8_t hue, uint8_t sat, uint8_t val, LED_TYPE *led1); +void sethsv_raw(uint8_t hue, uint8_t sat, uint8_t val, LED_TYPE *led1); // without RGBLIGHT_LIMIT_VAL check +void setrgb(uint8_t r, uint8_t g, uint8_t b, LED_TYPE *led1); - typedef struct _rgblight_syncinfo_t { - rgblight_config_t config; - rgblight_status_t status; - } rgblight_syncinfo_t; +/* === Low level Functions === */ +void rgblight_set(void); +void rgblight_set_clipping_range(uint8_t start_pos, uint8_t num_leds); - /* for split keyboard master side */ - uint8_t rgblight_get_change_flags(void); - void rgblight_clear_change_flags(void); - void rgblight_get_syncinfo(rgblight_syncinfo_t *syncinfo); - /* for split keyboard slave side */ - void rgblight_update_sync(rgblight_syncinfo_t *syncinfo, bool write_to_eeprom); +/* === Effects and Animations Functions === */ +/* effect range setting */ +void rgblight_set_effect_range(uint8_t start_pos, uint8_t num_leds); + +/* direct operation */ +void rgblight_setrgb_at(uint8_t r, uint8_t g, uint8_t b, uint8_t index); +void rgblight_sethsv_at(uint8_t hue, uint8_t sat, uint8_t val, uint8_t index); +void rgblight_setrgb_range(uint8_t r, uint8_t g, uint8_t b, uint8_t start, uint8_t end); +void rgblight_sethsv_range(uint8_t hue, uint8_t sat, uint8_t val, uint8_t start, uint8_t end); +void rgblight_setrgb(uint8_t r, uint8_t g, uint8_t b); + +#ifndef RGBLIGHT_SPLIT +void rgblight_setrgb_master(uint8_t r, uint8_t g, uint8_t b); +void rgblight_setrgb_slave(uint8_t r, uint8_t g, uint8_t b); +void rgblight_sethsv_master(uint8_t hue, uint8_t sat, uint8_t val); +void rgblight_sethsv_slave(uint8_t hue, uint8_t sat, uint8_t val); #endif -void rgblight_init(void); +/* effect mode change */ +void rgblight_mode(uint8_t mode); +void rgblight_mode_noeeprom(uint8_t mode); void rgblight_increase(void); void rgblight_decrease(void); +void rgblight_step(void); +void rgblight_step_noeeprom(void); +void rgblight_step_reverse(void); +void rgblight_step_reverse_noeeprom(void); + +/* effects mode disable/enable */ void rgblight_toggle(void); +void rgblight_toggle_noeeprom(void); void rgblight_enable(void); +void rgblight_enable_noeeprom(void); void rgblight_disable(void); -void rgblight_step(void); -void rgblight_step_reverse(void); -uint8_t rgblight_get_mode(void); -void rgblight_mode(uint8_t mode); -void rgblight_set(void); -uint32_t rgblight_read_dword(void); -void rgblight_update_dword(uint32_t dword); +void rgblight_disable_noeeprom(void); + +/* hue, sat, val change */ void rgblight_increase_hue(void); +void rgblight_increase_hue_noeeprom(void); void rgblight_decrease_hue(void); +void rgblight_decrease_hue_noeeprom(void); void rgblight_increase_sat(void); +void rgblight_increase_sat_noeeprom(void); void rgblight_decrease_sat(void); +void rgblight_decrease_sat_noeeprom(void); void rgblight_increase_val(void); +void rgblight_increase_val_noeeprom(void); void rgblight_decrease_val(void); +void rgblight_decrease_val_noeeprom(void); void rgblight_increase_speed(void); void rgblight_decrease_speed(void); void rgblight_sethsv(uint8_t hue, uint8_t sat, uint8_t val); +void rgblight_sethsv_noeeprom(uint8_t hue, uint8_t sat, uint8_t val); + +/* query */ +uint8_t rgblight_get_mode(void); uint8_t rgblight_get_hue(void); uint8_t rgblight_get_sat(void); uint8_t rgblight_get_val(void); -void rgblight_setrgb(uint8_t r, uint8_t g, uint8_t b); -void rgblight_setrgb_at(uint8_t r, uint8_t g, uint8_t b, uint8_t index); -void rgblight_sethsv_at(uint8_t hue, uint8_t sat, uint8_t val, uint8_t index); -void rgblight_setrgb_range(uint8_t r, uint8_t g, uint8_t b, uint8_t start, uint8_t end); -void rgblight_sethsv_range(uint8_t hue, uint8_t sat, uint8_t val, uint8_t start, uint8_t end); -void rgblight_setrgb_master(uint8_t r, uint8_t g, uint8_t b); -void rgblight_setrgb_slave(uint8_t r, uint8_t g, uint8_t b); -void rgblight_sethsv_master(uint8_t hue, uint8_t sat, uint8_t val); -void rgblight_sethsv_slave(uint8_t hue, uint8_t sat, uint8_t val); -void rgblight_set_clipping_range(uint8_t start_pos, uint8_t num_leds); +/* === qmk_firmware (core)internal Functions === */ +void rgblight_init(void); +uint32_t rgblight_read_dword(void); +void rgblight_update_dword(uint32_t dword); uint32_t eeconfig_read_rgblight(void); void eeconfig_update_rgblight(uint32_t val); void eeconfig_update_rgblight_default(void); @@ -233,27 +251,9 @@ void eeconfig_debug_rgblight(void); void rgb_matrix_increase(void); void rgb_matrix_decrease(void); -void sethsv(uint8_t hue, uint8_t sat, uint8_t val, LED_TYPE *led1); -void setrgb(uint8_t r, uint8_t g, uint8_t b, LED_TYPE *led1); - -void rgblight_sethsv_noeeprom(uint8_t hue, uint8_t sat, uint8_t val); -void rgblight_mode_noeeprom(uint8_t mode); -void rgblight_toggle_noeeprom(void); -void rgblight_enable_noeeprom(void); -void rgblight_disable_noeeprom(void); -void rgblight_step_noeeprom(void); -void rgblight_step_reverse_noeeprom(void); -void rgblight_increase_hue_noeeprom(void); -void rgblight_decrease_hue_noeeprom(void); -void rgblight_increase_sat_noeeprom(void); -void rgblight_decrease_sat_noeeprom(void); -void rgblight_increase_val_noeeprom(void); -void rgblight_decrease_val_noeeprom(void); - void rgblight_sethsv_eeprom_helper(uint8_t hue, uint8_t sat, uint8_t val, bool write_to_eeprom); void rgblight_mode_eeprom_helper(uint8_t mode, bool write_to_eeprom); - #define EZ_RGB(val) rgblight_show_solid_color((val >> 16) & 0xFF, (val >> 8) & 0xFF, val & 0xFF) void rgblight_show_solid_color(uint8_t r, uint8_t g, uint8_t b); @@ -264,6 +264,25 @@ void rgblight_timer_enable(void); void rgblight_timer_disable(void); void rgblight_timer_toggle(void); +#ifdef RGBLIGHT_SPLIT + #define RGBLIGHT_STATUS_CHANGE_MODE (1<<0) + #define RGBLIGHT_STATUS_CHANGE_HSVS (1<<1) + #define RGBLIGHT_STATUS_CHANGE_TIMER (1<<2) + #define RGBLIGHT_STATUS_ANIMATION_TICK (1<<3) + + typedef struct _rgblight_syncinfo_t { + rgblight_config_t config; + rgblight_status_t status; + } rgblight_syncinfo_t; + + /* for split keyboard master side */ + uint8_t rgblight_get_change_flags(void); + void rgblight_clear_change_flags(void); + void rgblight_get_syncinfo(rgblight_syncinfo_t *syncinfo); + /* for split keyboard slave side */ + void rgblight_update_sync(rgblight_syncinfo_t *syncinfo, bool write_to_eeprom); +#endif + #ifdef RGBLIGHT_USE_TIMER typedef struct _animation_status_t { -- cgit 1.4.1 From b541369c45f13369c16de1b887f6ca5b7e589e6d Mon Sep 17 00:00:00 2001 From: Pavlos Vinieratos Date: Thu, 16 May 2019 17:21:51 +0200 Subject: [Docs] Fix typo in Userspace doc (#5871) * typo * Update docs/feature_userspace.md Co-Authored-By: fauxpark --- docs/feature_userspace.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'docs') diff --git a/docs/feature_userspace.md b/docs/feature_userspace.md index d82d43138d..2f119c8bde 100644 --- a/docs/feature_userspace.md +++ b/docs/feature_userspace.md @@ -110,7 +110,7 @@ QMK has a bunch of [functions](custom_quantum_functions.md) that have [`_quantum However, you can actually add support for keymap version, so that you can use it in both your userspace and your keymap! -For instance, lets looks at the `layer_state_set_user` function. Lets enable the [Tri Layer State](ref_functions.md#olkb-tri-layers) functionalitly to all of our boards, and then still have your `keymap.c` still able to use this functionality. +For instance, let's look at the `layer_state_set_user()` function. You can enable the [Tri Layer State](ref_functions.md#olkb-tri-layers) functionality on all of your boards, while also retaining the Tri Layer functionality in your `keymap.c` files. In your `` file, you'd want to add this: ```c -- cgit 1.4.1 From 48b01446ba6b74d7e0793f972873a10fceef2f62 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Thu, 16 May 2019 10:28:06 -0700 Subject: Make delay for Capslock in Hold-Tap functions configurable (#5497) * Increase delay for Hold-Tap register for CAPSLOCK Because it seems that the 80ms delay wasn't too much * Screw it, make the caps delay a define and make it configurable --- docs/config_options.md | 2 ++ tmk_core/common/action.c | 10 +++++++++- 2 files changed, 11 insertions(+), 1 deletion(-) (limited to 'docs') diff --git a/docs/config_options.md b/docs/config_options.md index 3ef00394db..cab3c0747a 100644 --- a/docs/config_options.md +++ b/docs/config_options.md @@ -171,6 +171,8 @@ If you define these options you will enable the associated feature, which may in * how long for the Combo keys to be detected. Defaults to `TAPPING_TERM` if not defined. * `#define TAP_CODE_DELAY 100` * Sets the delay between `register_code` and `unregister_code`, if you're having issues with it registering properly (common on VUSB boards). The value is in milliseconds. +* `#define TAP_HOLD_CAPS_DELAY 200` + * Sets the delay for Tap Hold keys (`LT`, `MT`) when using `KC_CAPSLOCK` keycode, as this has some special handling on MacOS. The value is in milliseconds, and defaults to 200ms if not defined. ## RGB Light Configuration diff --git a/tmk_core/common/action.c b/tmk_core/common/action.c index d4d4ac28da..bb4e66c9c8 100644 --- a/tmk_core/common/action.c +++ b/tmk_core/common/action.c @@ -44,6 +44,9 @@ int retro_tapping_counter = 0; #include #endif +#ifndef TAP_HOLD_CAPS_DELAY +# define TAP_HOLD_CAPS_DELAY 200 +#endif /** \brief Called to execute an action. * * FIXME: Needs documentation. @@ -518,7 +521,7 @@ void process_action(keyrecord_t *record, action_t action) if (tap_count > 0) { dprint("KEYMAP_TAP_KEY: Tap: unregister_code\n"); if (action.layer_tap.code == KC_CAPS) { - wait_ms(80); + wait_ms(TAP_HOLD_CAPS_DELAY); } unregister_code(action.layer_tap.code); } else { @@ -853,8 +856,13 @@ void unregister_code(uint8_t code) */ void tap_code(uint8_t code) { register_code(code); + if (code == KC_CAPS) { + wait_ms(TAP_HOLD_CAPS_DELAY); + } #if TAP_CODE_DELAY > 0 + else { wait_ms(TAP_CODE_DELAY); + } #endif unregister_code(code); } -- cgit 1.4.1 From d85110b6ec5fcdf3ef88b41909ce739b017abbea Mon Sep 17 00:00:00 2001 From: Josh Date: Fri, 17 May 2019 16:48:53 -0400 Subject: Adds a configurable initial delay to the audio clicky feature (#4286) * Adding an AUDIO_CLICKY_DELAY_DURATION configurable value to the AUDIO_CLICKY feature. * Tweaking my community keymap to work better with my rev 4 planck. --- docs/feature_audio.md | 3 ++- layouts/community/ortho_4x12/mindsound/config.h | 5 +++-- quantum/process_keycode/process_clicky.c | 11 ++++++++--- 3 files changed, 13 insertions(+), 6 deletions(-) (limited to 'docs') diff --git a/docs/feature_audio.md b/docs/feature_audio.md index e1dd4c5a85..7511598bcf 100644 --- a/docs/feature_audio.md +++ b/docs/feature_audio.md @@ -175,8 +175,9 @@ You can configure the default, min and max frequencies, the stepping and built i | `AUDIO_CLICKY_FREQ_DEFAULT` | 440.0f | Sets the default/starting audio frequency for the clicky sounds. | | `AUDIO_CLICKY_FREQ_MIN` | 65.0f | Sets the lowest frequency (under 60f are a bit buggy). | | `AUDIO_CLICKY_FREQ_MAX` | 1500.0f | Sets the the highest frequency. Too high may result in coworkers attacking you. | -| `AUDIO_CLICKY_FREQ_FACTOR` | 1.18921f| Sets the stepping of UP/DOWN key codes. | +| `AUDIO_CLICKY_FREQ_FACTOR` | 1.18921f| Sets the stepping of UP/DOWN key codes. This is a multiplicative factor. The default steps the frequency up/down by a musical minor third. | | `AUDIO_CLICKY_FREQ_RANDOMNESS` | 0.05f | Sets a factor of randomness for the clicks, Setting this to `0f` will make each click identical, and `1.0f` will make this sound much like the 90's computer screen scrolling/typing effect. | +| `AUDIO_CLICKY_DELAY_DURATION` | 1 | An integer note duration where 1 is 1/16th of the tempo, or a sixty-fourth note (see `quantum/audio/musical_notes.h` for implementation details). The main clicky effect will be delayed by this duration. Adjusting this to values around 6-12 will help compensate for loud switches. | diff --git a/layouts/community/ortho_4x12/mindsound/config.h b/layouts/community/ortho_4x12/mindsound/config.h index 76e7da2049..e615fe77eb 100644 --- a/layouts/community/ortho_4x12/mindsound/config.h +++ b/layouts/community/ortho_4x12/mindsound/config.h @@ -15,9 +15,10 @@ #define STARTUP_SONG SONG(ADVENTURE_TIME) #define AUDIO_CLICKY #define AUDIO_CLICKY_ON + #define AUDIO_CLICKY_DELAY_DURATION 0 #define AUDIO_CLICKY_FREQ_MAX 2500.0f - #define AUDIO_CLICKY_FREQ_RANDOMNESS 0.2f - #define AUDIO_CLICKY_FREQ_DEFAULT 110.0f + #define AUDIO_CLICKY_FREQ_RANDOMNESS 0.3f + #define AUDIO_CLICKY_FREQ_DEFAULT 880.0f #endif // for some reason the LSvi rev1 disables action tapping... diff --git a/quantum/process_keycode/process_clicky.c b/quantum/process_keycode/process_clicky.c index 12fef51f9e..43b803afe7 100644 --- a/quantum/process_keycode/process_clicky.c +++ b/quantum/process_keycode/process_clicky.c @@ -3,6 +3,9 @@ #ifdef AUDIO_CLICKY +#ifndef AUDIO_CLICKY_DELAY_DURATION +#define AUDIO_CLICKY_DELAY_DURATION 1 +#endif // !AUDIO_CLICKY_DELAY_DURATION #ifndef AUDIO_CLICKY_FREQ_DEFAULT #define AUDIO_CLICKY_FREQ_DEFAULT 440.0f #endif // !AUDIO_CLICKY_FREQ_DEFAULT @@ -21,7 +24,9 @@ float clicky_freq = AUDIO_CLICKY_FREQ_DEFAULT; float clicky_rand = AUDIO_CLICKY_FREQ_RANDOMNESS; -float clicky_song[][2] = {{AUDIO_CLICKY_FREQ_DEFAULT, 3}, {AUDIO_CLICKY_FREQ_DEFAULT, 1}}; // 3 and 1 --> durations + +// the first "note" is an intentional delay; the 2nd and 3rd notes are the "clicky" +float clicky_song[][2] = {{AUDIO_CLICKY_FREQ_MIN, AUDIO_CLICKY_DELAY_DURATION}, {AUDIO_CLICKY_FREQ_DEFAULT, 3}, {AUDIO_CLICKY_FREQ_DEFAULT, 1}}; // 3 and 1 --> durations extern audio_config_t audio_config; @@ -34,8 +39,8 @@ void clicky_play(void) { #ifndef NO_MUSIC_MODE if (music_activated || midi_activated || !audio_config.enable) return; #endif // !NO_MUSIC_MODE - clicky_song[0][0] = 2.0f * clicky_freq * (1.0f + clicky_rand * ( ((float)rand()) / ((float)(RAND_MAX)) ) ); - clicky_song[1][0] = clicky_freq * (1.0f + clicky_rand * ( ((float)rand()) / ((float)(RAND_MAX)) ) ); + clicky_song[1][0] = 2.0f * clicky_freq * (1.0f + clicky_rand * ( ((float)rand()) / ((float)(RAND_MAX)) ) ); + clicky_song[2][0] = clicky_freq * (1.0f + clicky_rand * ( ((float)rand()) / ((float)(RAND_MAX)) ) ); PLAY_SONG(clicky_song); } -- cgit 1.4.1 From 0099bbf9a64a0b4df1093f528481bff39af2c80d Mon Sep 17 00:00:00 2001 From: XScorpion2 Date: Sun, 19 May 2019 11:09:06 -0500 Subject: Single Color Band scrolling left to right effects (#5867) --- docs/feature_rgb_matrix.md | 4 ++++ quantum/rgb_matrix_animations/colorband_sat_anim.h | 21 +++++++++++++++++++++ quantum/rgb_matrix_animations/colorband_val_anim.h | 21 +++++++++++++++++++++ .../rgb_matrix_animations/rgb_matrix_effects.inc | 2 ++ 4 files changed, 48 insertions(+) create mode 100644 quantum/rgb_matrix_animations/colorband_sat_anim.h create mode 100644 quantum/rgb_matrix_animations/colorband_val_anim.h (limited to 'docs') diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index 8347660dfe..df124ea0f5 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -194,6 +194,8 @@ enum rgb_matrix_effects { RGB_MATRIX_ALPHAS_MODS, // Static dual hue, speed is hue for secondary hue RGB_MATRIX_GRADIENT_UP_DOWN, // Static gradient top to bottom, speed controls how much gradient changes RGB_MATRIX_BREATHING, // Single hue brightness cycling animation + RGB_MATRIX_BAND_SAT, // Single hue band fading saturation scrolling left to right + RGB_MATRIX_BAND_VAL, // Single hue band fading brightness scrolling left to right RGB_MATRIX_CYCLE_ALL, // Full keyboard solid hue cycling through full gradient RGB_MATRIX_CYCLE_LEFT_RIGHT, // Full gradient scrolling left to right RGB_MATRIX_CYCLE_UP_DOWN, // Full gradient scrolling top to bottom @@ -235,6 +237,8 @@ You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `con |`#define DISABLE_RGB_MATRIX_ALPHAS_MODS` |Disables `RGB_MATRIX_ALPHAS_MODS` | |`#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN` |Disables `RGB_MATRIX_GRADIENT_UP_DOWN` | |`#define DISABLE_RGB_MATRIX_BREATHING` |Disables `RGB_MATRIX_BREATHING` | +|`#define DISABLE_RGB_MATRIX_BAND_SAT` |Disables `RGB_MATRIX_BAND_SAT` | +|`#define DISABLE_RGB_MATRIX_BAND_VAL` |Disables `RGB_MATRIX_BAND_VAL` | |`#define DISABLE_RGB_MATRIX_CYCLE_ALL` |Disables `RGB_MATRIX_CYCLE_ALL` | |`#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT` |Disables `RGB_MATRIX_CYCLE_LEFT_RIGHT` | |`#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN` |Disables `RGB_MATRIX_CYCLE_UP_DOWN` | diff --git a/quantum/rgb_matrix_animations/colorband_sat_anim.h b/quantum/rgb_matrix_animations/colorband_sat_anim.h new file mode 100644 index 0000000000..89773b6ce6 --- /dev/null +++ b/quantum/rgb_matrix_animations/colorband_sat_anim.h @@ -0,0 +1,21 @@ +#ifndef DISABLE_RGB_MATRIX_BAND_SAT +RGB_MATRIX_EFFECT(BAND_SAT) +#ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS + +bool BAND_SAT(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { rgb_matrix_config.hue, 0, rgb_matrix_config.val }; + uint8_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 4); + for (uint8_t i = led_min; i < led_max; i++) { + RGB_MATRIX_TEST_LED_FLAGS(); + int16_t s = rgb_matrix_config.sat - abs(scale8(g_led_config.point[i].x, 228) + 28 - time) * 8; + hsv.s = s < 0 ? 0 : s; + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS +#endif // DISABLE_RGB_MATRIX_BAND_SAT diff --git a/quantum/rgb_matrix_animations/colorband_val_anim.h b/quantum/rgb_matrix_animations/colorband_val_anim.h new file mode 100644 index 0000000000..bf41cec910 --- /dev/null +++ b/quantum/rgb_matrix_animations/colorband_val_anim.h @@ -0,0 +1,21 @@ +#ifndef DISABLE_RGB_MATRIX_BAND_VAL +RGB_MATRIX_EFFECT(BAND_VAL) +#ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS + +bool BAND_VAL(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { rgb_matrix_config.hue, rgb_matrix_config.sat, 0 }; + uint8_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 4); + for (uint8_t i = led_min; i < led_max; i++) { + RGB_MATRIX_TEST_LED_FLAGS(); + int16_t v = rgb_matrix_config.val - abs(scale8(g_led_config.point[i].x, 228) + 28 - time) * 8; + hsv.v = v < 0 ? 0 : v; + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS +#endif // DISABLE_RGB_MATRIX_BAND_VAL diff --git a/quantum/rgb_matrix_animations/rgb_matrix_effects.inc b/quantum/rgb_matrix_animations/rgb_matrix_effects.inc index f05a415a58..4b01afaa35 100644 --- a/quantum/rgb_matrix_animations/rgb_matrix_effects.inc +++ b/quantum/rgb_matrix_animations/rgb_matrix_effects.inc @@ -3,6 +3,8 @@ #include "rgb_matrix_animations/alpha_mods_anim.h" #include "rgb_matrix_animations/gradient_up_down_anim.h" #include "rgb_matrix_animations/breathing_anim.h" +#include "rgb_matrix_animations/colorband_sat_anim.h" +#include "rgb_matrix_animations/colorband_val_anim.h" #include "rgb_matrix_animations/cycle_all_anim.h" #include "rgb_matrix_animations/cycle_left_right_anim.h" #include "rgb_matrix_animations/cycle_up_down_anim.h" -- cgit 1.4.1 From 270b39b2eb44247cff75ddd216a8e67f8f264991 Mon Sep 17 00:00:00 2001 From: XScorpion2 Date: Sun, 19 May 2019 11:19:46 -0500 Subject: Spirals, Pinwheels, and Documentation....Oh My! RGB Matrix Effects (#5877) * Spirals, Pinwheels, and Documentation....Oh My! * Spiral effect band thickness adjustments * Fixing animation spin directions --- docs/feature_rgb_matrix.md | 12 +++++++++++ lib/lib8tion/trig8.h | 25 ++++++++++++++++++++++ .../colorband_pinwheel_sat_anim.h | 22 +++++++++++++++++++ .../colorband_pinwheel_val_anim.h | 22 +++++++++++++++++++ .../colorband_spiral_sat_anim.h | 23 ++++++++++++++++++++ .../colorband_spiral_val_anim.h | 23 ++++++++++++++++++++ .../rgb_matrix_animations/cycle_pinwheel_anim.h | 22 +++++++++++++++++++ quantum/rgb_matrix_animations/cycle_spiral_anim.h | 23 ++++++++++++++++++++ .../rgb_matrix_animations/rgb_matrix_effects.inc | 6 ++++++ 9 files changed, 178 insertions(+) create mode 100644 quantum/rgb_matrix_animations/colorband_pinwheel_sat_anim.h create mode 100644 quantum/rgb_matrix_animations/colorband_pinwheel_val_anim.h create mode 100644 quantum/rgb_matrix_animations/colorband_spiral_sat_anim.h create mode 100644 quantum/rgb_matrix_animations/colorband_spiral_val_anim.h create mode 100644 quantum/rgb_matrix_animations/cycle_pinwheel_anim.h create mode 100644 quantum/rgb_matrix_animations/cycle_spiral_anim.h (limited to 'docs') diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index df124ea0f5..18636776cd 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -196,12 +196,18 @@ enum rgb_matrix_effects { RGB_MATRIX_BREATHING, // Single hue brightness cycling animation RGB_MATRIX_BAND_SAT, // Single hue band fading saturation scrolling left to right RGB_MATRIX_BAND_VAL, // Single hue band fading brightness scrolling left to right + RGB_MATRIX_BAND_PINWHEEL_SAT, // Single hue 3 blade spinning pinwheel fades saturation + RGB_MATRIX_BAND_PINWHEEL_VAL, // Single hue 3 blade spinning pinwheel fades brightness + RGB_MATRIX_BAND_SPIRAL_SAT, // Single hue spinning spiral fades saturation + RGB_MATRIX_BAND_SPIRAL_VAL, // Single hue spinning spiral fades brightness RGB_MATRIX_CYCLE_ALL, // Full keyboard solid hue cycling through full gradient RGB_MATRIX_CYCLE_LEFT_RIGHT, // Full gradient scrolling left to right RGB_MATRIX_CYCLE_UP_DOWN, // Full gradient scrolling top to bottom RGB_MATRIX_CYCLE_OUT_IN, // Full gradient scrolling out to in RGB_MATRIX_CYCLE_OUT_IN_DUAL, // Full dual gradients scrolling out to in RGB_MATRIX_RAINBOW_MOVING_CHEVRON, // Full gradent Chevron shapped scrolling left to right + RGB_MATRIX_CYCLE_PINWHEEL, // Full gradient spinning pinwheel around center of keyboard + RGB_MATRIX_CYCLE_SPIRAL, // Full gradient spinning spiral around center of keyboard RGB_MATRIX_DUAL_BEACON, // Full gradient spinning around center of keyboard RGB_MATRIX_RAINBOW_BEACON, // Full tighter gradient spinning around center of keyboard RGB_MATRIX_RAINBOW_PINWHEELS, // Full dual gradients spinning two halfs of keyboard @@ -239,6 +245,10 @@ You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `con |`#define DISABLE_RGB_MATRIX_BREATHING` |Disables `RGB_MATRIX_BREATHING` | |`#define DISABLE_RGB_MATRIX_BAND_SAT` |Disables `RGB_MATRIX_BAND_SAT` | |`#define DISABLE_RGB_MATRIX_BAND_VAL` |Disables `RGB_MATRIX_BAND_VAL` | +|`#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT` |Disables `RGB_MATRIX_BAND_PINWHEEL_SAT` | +|`#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL` |Disables `RGB_MATRIX_BAND_PINWHEEL_VAL` | +|`#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT` |Disables `RGB_MATRIX_BAND_SPIRAL_SAT` | +|`#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL` |Disables `RGB_MATRIX_BAND_SPIRAL_VAL` | |`#define DISABLE_RGB_MATRIX_CYCLE_ALL` |Disables `RGB_MATRIX_CYCLE_ALL` | |`#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT` |Disables `RGB_MATRIX_CYCLE_LEFT_RIGHT` | |`#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN` |Disables `RGB_MATRIX_CYCLE_UP_DOWN` | @@ -246,6 +256,8 @@ You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `con |`#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL` |Disables `RGB_MATRIX_CYCLE_OUT_IN_DUAL` | |`#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON` |Disables `RGB_MATRIX_RAINBOW_MOVING_CHEVRON` | |`#define DISABLE_RGB_MATRIX_DUAL_BEACON` |Disables `RGB_MATRIX_DUAL_BEACON` | +|`#define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL` |Disables `RGB_MATRIX_CYCLE_PINWHEEL` | +|`#define DISABLE_RGB_MATRIX_CYCLE_SPIRAL` |Disables `RGB_MATRIX_CYCLE_SPIRAL` | |`#define DISABLE_RGB_MATRIX_RAINBOW_BEACON` |Disables `RGB_MATRIX_RAINBOW_BEACON` | |`#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS` |Disables `RGB_MATRIX_RAINBOW_PINWHEELS` | |`#define DISABLE_RGB_MATRIX_RAINDROPS` |Disables `RGB_MATRIX_RAINDROPS` | diff --git a/lib/lib8tion/trig8.h b/lib/lib8tion/trig8.h index 6ef3ce625f..cfba6373fb 100644 --- a/lib/lib8tion/trig8.h +++ b/lib/lib8tion/trig8.h @@ -255,5 +255,30 @@ LIB8STATIC uint8_t cos8( uint8_t theta) return sin8( theta + 64); } +/// Fast 16-bit approximation of atan2(x). +/// @returns atan2, value between 0 and 255 +LIB8STATIC uint8_t atan2_8(int16_t dy, int16_t dx) +{ + if (dy == 0) + { + if (dx >= 0) + return 0; + else + return 128; + } + + int16_t abs_y = dy > 0 ? dy : -dy; + int8_t a; + + if (dx >= 0) + a = 32 - (32 * (dx - abs_y) / (dx + abs_y)); + else + a = 96 - (32 * (dx + abs_y) / (abs_y - dx)); + + if (dy < 0) + return -a; // negate if in quad III or IV + return a; +} + ///@} #endif diff --git a/quantum/rgb_matrix_animations/colorband_pinwheel_sat_anim.h b/quantum/rgb_matrix_animations/colorband_pinwheel_sat_anim.h new file mode 100644 index 0000000000..3e6df1fbeb --- /dev/null +++ b/quantum/rgb_matrix_animations/colorband_pinwheel_sat_anim.h @@ -0,0 +1,22 @@ +#ifndef DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +RGB_MATRIX_EFFECT(BAND_PINWHEEL_SAT) +#ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS + +bool BAND_PINWHEEL_SAT(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { rgb_matrix_config.hue, 0, rgb_matrix_config.val }; + uint8_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 2); + for (uint8_t i = led_min; i < led_max; i++) { + RGB_MATRIX_TEST_LED_FLAGS(); + int16_t dx = g_led_config.point[i].x - 112; + int16_t dy = g_led_config.point[i].y - 32; + hsv.s = rgb_matrix_config.sat - time - atan2_8(dy, dx) * 3; + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS +#endif // DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT diff --git a/quantum/rgb_matrix_animations/colorband_pinwheel_val_anim.h b/quantum/rgb_matrix_animations/colorband_pinwheel_val_anim.h new file mode 100644 index 0000000000..88cc7d1f23 --- /dev/null +++ b/quantum/rgb_matrix_animations/colorband_pinwheel_val_anim.h @@ -0,0 +1,22 @@ +#ifndef DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +RGB_MATRIX_EFFECT(BAND_PINWHEEL_VAL) +#ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS + +bool BAND_PINWHEEL_VAL(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { rgb_matrix_config.hue, rgb_matrix_config.sat, 0 }; + uint8_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 2); + for (uint8_t i = led_min; i < led_max; i++) { + RGB_MATRIX_TEST_LED_FLAGS(); + int16_t dx = g_led_config.point[i].x - 112; + int16_t dy = g_led_config.point[i].y - 32; + hsv.v = rgb_matrix_config.val - time - atan2_8(dy, dx) * 3; + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS +#endif // DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL diff --git a/quantum/rgb_matrix_animations/colorband_spiral_sat_anim.h b/quantum/rgb_matrix_animations/colorband_spiral_sat_anim.h new file mode 100644 index 0000000000..44955900a5 --- /dev/null +++ b/quantum/rgb_matrix_animations/colorband_spiral_sat_anim.h @@ -0,0 +1,23 @@ +#ifndef DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT +RGB_MATRIX_EFFECT(BAND_SPIRAL_SAT) +#ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS + +bool BAND_SPIRAL_SAT(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { rgb_matrix_config.hue, 0, rgb_matrix_config.val }; + uint8_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 2); + for (uint8_t i = led_min; i < led_max; i++) { + RGB_MATRIX_TEST_LED_FLAGS(); + int16_t dx = g_led_config.point[i].x - 112; + int16_t dy = g_led_config.point[i].y - 32; + uint8_t dist = sqrt16(dx * dx + dy * dy); + hsv.s = rgb_matrix_config.sat + dist - time - atan2_8(dy, dx); + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS +#endif // DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT diff --git a/quantum/rgb_matrix_animations/colorband_spiral_val_anim.h b/quantum/rgb_matrix_animations/colorband_spiral_val_anim.h new file mode 100644 index 0000000000..5aea0c8da1 --- /dev/null +++ b/quantum/rgb_matrix_animations/colorband_spiral_val_anim.h @@ -0,0 +1,23 @@ +#ifndef DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL +RGB_MATRIX_EFFECT(BAND_SPIRAL_VAL) +#ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS + +bool BAND_SPIRAL_VAL(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { rgb_matrix_config.hue, rgb_matrix_config.sat, 0 }; + uint8_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 2); + for (uint8_t i = led_min; i < led_max; i++) { + RGB_MATRIX_TEST_LED_FLAGS(); + int16_t dx = g_led_config.point[i].x - 112; + int16_t dy = g_led_config.point[i].y - 32; + uint8_t dist = sqrt16(dx * dx + dy * dy); + hsv.v = rgb_matrix_config.val + dist - time - atan2_8(dy, dx); + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS +#endif // DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL diff --git a/quantum/rgb_matrix_animations/cycle_pinwheel_anim.h b/quantum/rgb_matrix_animations/cycle_pinwheel_anim.h new file mode 100644 index 0000000000..59d60ac077 --- /dev/null +++ b/quantum/rgb_matrix_animations/cycle_pinwheel_anim.h @@ -0,0 +1,22 @@ +#ifndef DISABLE_RGB_MATRIX_CYCLE_PINWHEEL +RGB_MATRIX_EFFECT(CYCLE_PINWHEEL) +#ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS + +bool CYCLE_PINWHEEL(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { 0, rgb_matrix_config.sat, rgb_matrix_config.val }; + uint8_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 4); + for (uint8_t i = led_min; i < led_max; i++) { + RGB_MATRIX_TEST_LED_FLAGS(); + int16_t dx = g_led_config.point[i].x - 112; + int16_t dy = g_led_config.point[i].y - 32; + hsv.h = atan2_8(dy, dx) + time; + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS +#endif // DISABLE_RGB_MATRIX_CYCLE_PINWHEEL diff --git a/quantum/rgb_matrix_animations/cycle_spiral_anim.h b/quantum/rgb_matrix_animations/cycle_spiral_anim.h new file mode 100644 index 0000000000..865309c252 --- /dev/null +++ b/quantum/rgb_matrix_animations/cycle_spiral_anim.h @@ -0,0 +1,23 @@ +#ifndef DISABLE_RGB_MATRIX_CYCLE_SPIRAL +RGB_MATRIX_EFFECT(CYCLE_SPIRAL) +#ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS + +bool CYCLE_SPIRAL(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { 0, rgb_matrix_config.sat, rgb_matrix_config.val }; + uint8_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 2); + for (uint8_t i = led_min; i < led_max; i++) { + RGB_MATRIX_TEST_LED_FLAGS(); + int16_t dx = g_led_config.point[i].x - 112; + int16_t dy = g_led_config.point[i].y - 32; + uint8_t dist = sqrt16(dx * dx + dy * dy); + hsv.h = dist - time - atan2_8(dy, dx); + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS +#endif // DISABLE_RGB_MATRIX_CYCLE_SPIRAL diff --git a/quantum/rgb_matrix_animations/rgb_matrix_effects.inc b/quantum/rgb_matrix_animations/rgb_matrix_effects.inc index 4b01afaa35..01332ed0dd 100644 --- a/quantum/rgb_matrix_animations/rgb_matrix_effects.inc +++ b/quantum/rgb_matrix_animations/rgb_matrix_effects.inc @@ -5,12 +5,18 @@ #include "rgb_matrix_animations/breathing_anim.h" #include "rgb_matrix_animations/colorband_sat_anim.h" #include "rgb_matrix_animations/colorband_val_anim.h" +#include "rgb_matrix_animations/colorband_pinwheel_sat_anim.h" +#include "rgb_matrix_animations/colorband_pinwheel_val_anim.h" +#include "rgb_matrix_animations/colorband_spiral_sat_anim.h" +#include "rgb_matrix_animations/colorband_spiral_val_anim.h" #include "rgb_matrix_animations/cycle_all_anim.h" #include "rgb_matrix_animations/cycle_left_right_anim.h" #include "rgb_matrix_animations/cycle_up_down_anim.h" #include "rgb_matrix_animations/rainbow_moving_chevron_anim.h" #include "rgb_matrix_animations/cycle_out_in_anim.h" #include "rgb_matrix_animations/cycle_out_in_dual_anim.h" +#include "rgb_matrix_animations/cycle_pinwheel_anim.h" +#include "rgb_matrix_animations/cycle_spiral_anim.h" #include "rgb_matrix_animations/dual_beacon_anim.h" #include "rgb_matrix_animations/rainbow_beacon_anim.h" #include "rgb_matrix_animations/rainbow_pinwheels_anim.h" -- cgit 1.4.1 From 5c7b37bbbde969eb056d531c897c1d5f80beeb58 Mon Sep 17 00:00:00 2001 From: Ryan Caltabiano Date: Wed, 15 May 2019 22:23:42 -0500 Subject: Added custom center point to rgb matrix --- docs/feature_rgb_matrix.md | 6 ++++-- quantum/rgb_matrix.c | 6 ++++++ quantum/rgb_matrix_animations/cycle_out_in_anim.h | 4 ++-- quantum/rgb_matrix_animations/cycle_out_in_dual_anim.h | 4 ++-- quantum/rgb_matrix_animations/dual_beacon_anim.h | 2 +- quantum/rgb_matrix_animations/rainbow_beacon_anim.h | 2 +- quantum/rgb_matrix_animations/rainbow_pinwheels_anim.h | 2 +- 7 files changed, 17 insertions(+), 9 deletions(-) (limited to 'docs') diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index 18636776cd..8f0cd12b3c 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -144,14 +144,16 @@ const led_config_t g_led_config = { { } }; ``` -The first part, `// Key Matrix to LED Index`, tells the system what key this LED represents by using the key's electrical matrix row & col. The second part, `// LED Index to Physical Position` represents the LED's physical position on the keyboard. The first value, `x`, is between 0-224 (inclusive), and the second value, `y`, is between 0-64 (inclusive). This range is due to effect that calculate the center or halves for their animations. The easiest way to calculate these positions is imagine your keyboard is a grid, and the top left of the keyboard represents x, y coordinate 0, 0 and the bottom right of your keyboard represents 224, 64. Using this as a basis, you can use the following formula to calculate the physical position: +The first part, `// Key Matrix to LED Index`, tells the system what key this LED represents by using the key's electrical matrix row & col. The second part, `// LED Index to Physical Position` represents the LED's physical `{ x, y }` position on the keyboard. The default expected range of values for `{ x, y }` is the inclusive range `{ 0..224, 0..64 }`. This default expected range is due to effects that calculate the center of the keyboard for their animations. The easiest way to calculate these positions is imagine your keyboard is a grid, and the top left of the keyboard represents `{ x, y }` coordinate `{ 0, 0 }` and the bottom right of your keyboard represents `{ 224, 64 }`. Using this as a basis, you can use the following formula to calculate the physical position: ```C x = 224 / (NUMBER_OF_COLS - 1) * COL_POSITION y = 64 / (NUMBER_OF_ROWS - 1) * ROW_POSITION ``` -Where NUMBER_OF_COLS, NUMBER_OF_ROWS, COL_POSITION, & ROW_POSITION are all based on the physical layout of your keyboard, not the electrical layout. +Where NUMBER_OF_COLS, NUMBER_OF_ROWS, COL_POSITION, & ROW_POSITION are all based on the physical layout of your keyboard, not the electrical layout. + +As mentioned earlier, the center of the keyboard by default is expected to be `{ 112, 32 }`, but this can be changed if you want to more accurately calculate the LED's physical `{ x, y }` positions. Keyboard designers can implement `#define RGB_MATRIX_CENTER { 112, 32 }` in their config.h file with the new center point of the keyboard, or where they want it to be allowing more possibilities for the `{ x, y }` values. Do note that the maximum value for x or y is 255, and the recommended maximum is 224 as this gives animations runoff room before they reset. `// LED Index to Flag` is a bitmask, whether or not a certain LEDs is of a certain type. It is recommended that LEDs are set to only 1 type. diff --git a/quantum/rgb_matrix.c b/quantum/rgb_matrix.c index 9b9932df52..a6a9549af4 100644 --- a/quantum/rgb_matrix.c +++ b/quantum/rgb_matrix.c @@ -26,6 +26,12 @@ #include "lib/lib8tion/lib8tion.h" +#ifndef RGB_MATRIX_CENTER + const point_t k_rgb_matrix_center = { 112, 32 }; +#else + const point_t k_rgb_matrix_center = RGB_MATRIX_CENTER; +#endif + // ------------------------------------------ // -----Begin rgb effect includes macros----- #define RGB_MATRIX_EFFECT(name) diff --git a/quantum/rgb_matrix_animations/cycle_out_in_anim.h b/quantum/rgb_matrix_animations/cycle_out_in_anim.h index dc9d09fd3f..29209e4d7b 100644 --- a/quantum/rgb_matrix_animations/cycle_out_in_anim.h +++ b/quantum/rgb_matrix_animations/cycle_out_in_anim.h @@ -9,8 +9,8 @@ bool CYCLE_OUT_IN(effect_params_t* params) { uint8_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 4); for (uint8_t i = led_min; i < led_max; i++) { RGB_MATRIX_TEST_LED_FLAGS(); - int16_t dx = g_led_config.point[i].x - 112; - int16_t dy = g_led_config.point[i].y - 32; + int16_t dx = g_led_config.point[i].x - k_rgb_matrix_center.x; + int16_t dy = g_led_config.point[i].y - k_rgb_matrix_center.y; uint8_t dist = sqrt16(dx * dx + dy * dy); hsv.h = 3 * dist / 2 + time; RGB rgb = hsv_to_rgb(hsv); diff --git a/quantum/rgb_matrix_animations/cycle_out_in_dual_anim.h b/quantum/rgb_matrix_animations/cycle_out_in_dual_anim.h index 941e6b9a8a..b2f79ceea0 100644 --- a/quantum/rgb_matrix_animations/cycle_out_in_dual_anim.h +++ b/quantum/rgb_matrix_animations/cycle_out_in_dual_anim.h @@ -9,8 +9,8 @@ bool CYCLE_OUT_IN_DUAL(effect_params_t* params) { uint8_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 4); for (uint8_t i = led_min; i < led_max; i++) { RGB_MATRIX_TEST_LED_FLAGS(); - int16_t dx = 56 - abs8(g_led_config.point[i].x - 112); - int16_t dy = g_led_config.point[i].y - 32; + int16_t dx = (k_rgb_matrix_center.x / 2) - abs8(g_led_config.point[i].x - k_rgb_matrix_center.x); + int16_t dy = g_led_config.point[i].y - k_rgb_matrix_center.y; uint8_t dist = sqrt16(dx * dx + dy * dy); hsv.h = 3 * dist + time; RGB rgb = hsv_to_rgb(hsv); diff --git a/quantum/rgb_matrix_animations/dual_beacon_anim.h b/quantum/rgb_matrix_animations/dual_beacon_anim.h index f853f71ecc..59c91046d4 100644 --- a/quantum/rgb_matrix_animations/dual_beacon_anim.h +++ b/quantum/rgb_matrix_animations/dual_beacon_anim.h @@ -11,7 +11,7 @@ bool DUAL_BEACON(effect_params_t* params) { int8_t sin_value = sin8(time) - 128; for (uint8_t i = led_min; i < led_max; i++) { RGB_MATRIX_TEST_LED_FLAGS(); - hsv.h = ((g_led_config.point[i].y - 32) * cos_value + (g_led_config.point[i].x - 112) * sin_value) / 128 + rgb_matrix_config.hue; + hsv.h = ((g_led_config.point[i].y - k_rgb_matrix_center.y) * cos_value + (g_led_config.point[i].x - k_rgb_matrix_center.x) * sin_value) / 128 + rgb_matrix_config.hue; RGB rgb = hsv_to_rgb(hsv); rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); } diff --git a/quantum/rgb_matrix_animations/rainbow_beacon_anim.h b/quantum/rgb_matrix_animations/rainbow_beacon_anim.h index a0e0f814c5..564e3c480a 100644 --- a/quantum/rgb_matrix_animations/rainbow_beacon_anim.h +++ b/quantum/rgb_matrix_animations/rainbow_beacon_anim.h @@ -11,7 +11,7 @@ bool RAINBOW_BEACON(effect_params_t* params) { int16_t sin_value = 2 * (sin8(time) - 128); for (uint8_t i = led_min; i < led_max; i++) { RGB_MATRIX_TEST_LED_FLAGS(); - hsv.h = ((g_led_config.point[i].y - 32) * cos_value + (g_led_config.point[i].x - 112) * sin_value) / 128 + rgb_matrix_config.hue; + hsv.h = ((g_led_config.point[i].y - k_rgb_matrix_center.y) * cos_value + (g_led_config.point[i].x - k_rgb_matrix_center.x) * sin_value) / 128 + rgb_matrix_config.hue; RGB rgb = hsv_to_rgb(hsv); rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); } diff --git a/quantum/rgb_matrix_animations/rainbow_pinwheels_anim.h b/quantum/rgb_matrix_animations/rainbow_pinwheels_anim.h index 275aaa48d9..7d189b927b 100644 --- a/quantum/rgb_matrix_animations/rainbow_pinwheels_anim.h +++ b/quantum/rgb_matrix_animations/rainbow_pinwheels_anim.h @@ -11,7 +11,7 @@ bool PINWHEELS(effect_params_t* params) { int16_t sin_value = 3 * (sin8(time) - 128); for (uint8_t i = led_min; i < led_max; i++) { RGB_MATRIX_TEST_LED_FLAGS(); - hsv.h = ((g_led_config.point[i].y - 32) * cos_value + (56 - abs8(g_led_config.point[i].x - 112)) * sin_value) / 128 + rgb_matrix_config.hue; + hsv.h = ((g_led_config.point[i].y - k_rgb_matrix_center.y) * cos_value + (56 - abs8(g_led_config.point[i].x - k_rgb_matrix_center.x)) * sin_value) / 128 + rgb_matrix_config.hue; RGB rgb = hsv_to_rgb(hsv); rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); } -- cgit 1.4.1 From 02787ac07f29ecb05a53dc986c215e177ee11d1d Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Tue, 21 May 2019 13:15:59 -0700 Subject: Add missing links to features page and sidebar section --- docs/_summary.md | 3 +++ docs/features.md | 5 +++++ 2 files changed, 8 insertions(+) (limited to 'docs') diff --git a/docs/_summary.md b/docs/_summary.md index 043943f1d8..1c3153b040 100644 --- a/docs/_summary.md +++ b/docs/_summary.md @@ -54,9 +54,12 @@ * [Bootmagic](feature_bootmagic.md) * [Combos](feature_combo) * [Command](feature_command.md) + * [Debounce API](feature_debuonce.md) * [Dynamic Macros](feature_dynamic_macros.md) * [Encoders](feature_encoders.md) * [Grave Escape](feature_grave_esc.md) + * [Haptic Feedback](feature_haptic_feedback.md) + * [HD44780 LED](feature_hd44780.md) * [Key Lock](feature_key_lock.md) * [Layouts](feature_layouts.md) * [Leader Key](feature_leader_key.md) diff --git a/docs/features.md b/docs/features.md index cb69df35d7..eb3f26d6a8 100644 --- a/docs/features.md +++ b/docs/features.md @@ -7,12 +7,15 @@ QMK has a staggering number of features for building your keyboard. It can take * [Audio](feature_audio.md) - Connect a speaker to your keyboard for audio feedback, midi support, and music mode. * [Auto Shift](feature_auto_shift.md) - Tap for the normal key, hold slightly longer for its shifted state. * [Backlight](feature_backlight.md) - LED lighting support for your keyboard. +* [Bluetooth](feature_bluetooth.md) - BlueTooth support for your keyboard. * [Bootmagic](feature_bootmagic.md) - Adjust the behavior of your keyboard using hotkeys. * [Combos](feature_combo.md) - Custom actions for multiple key holds. * [Command](feature_command.md) - Runtime version of bootmagic (Formerly known as "Magic"). +* [Debounce API](feature_debuonce.md) - Customization of debouncing algorithms, and the ability to add more/custom debouncing. * [Dynamic Macros](feature_dynamic_macros.md) - Record and playback macros from the keyboard itself. * [Encoders](feature_encoders.md) - Rotary encoders! * [Grave Escape](feature_grave_esc.md) - Lets you use a single key for Esc and Grave. +* [Haptic Feedback](feature_haptic_feedback.md) - Add haptic feedback drivers to your board. * [HD44780 LCD Display](feature_hd44780.md) - Support for LCD character displays using the HD44780 standard. * [Key Lock](feature_key_lock.md) - Lock a key in the "down" state. * [Layouts](feature_layouts.md) - Use one keymap with any keyboard that supports your layout. @@ -20,6 +23,7 @@ QMK has a staggering number of features for building your keyboard. It can take * [LED Matrix](feature_led_matrix.md) - LED Matrix single color lights for per key lighting (Single Color, not RGB). * [Macros](feature_macros.md) - Send multiple key presses when pressing only one physical key. * [Mouse keys](feature_mouse_keys.md) - Control your mouse pointer from your keyboard. +* [OLED Driver](feature_oled_driver) - Add OLED screens to your keyboard. * [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys) - Sticky Keys, lets hit a key rather than holding it. * [Pointing Device](feature_pointing_device.md) - Framework for connecting your custom pointing device to your keyboard. * [PS2 Mouse](feature_ps2_mouse.md) - Driver for connecting a PS/2 mouse directly to your keyboard. @@ -33,3 +37,4 @@ QMK has a staggering number of features for building your keyboard. It can take * [Thermal Printer](feature_thermal_printer.md) - Connect a thermal printer to your keyboard to be able to toggle on a printed log of everything you type. * [Unicode](feature_unicode.md) - Unicode input support. * [Userspace](feature_userspace.md) - Share code between different keymaps and keyboards. +* [Velocikey](feature_velocikey.md) - Allows changes in animation speed based on WPM/Typing speed. -- cgit 1.4.1 From 894010786c4a78b939df7114d1c3e70957a8a300 Mon Sep 17 00:00:00 2001 From: ymzcdg <49898694+ymzcdg@users.noreply.github.com> Date: Thu, 23 May 2019 05:33:10 +0800 Subject: translate docs into Mandarin Chinese (#5890) * translate docs into Mandarin Chinese translate faq_debug.md into Chinese * translate faq_build.md into Chinese translate faq_build.md into Chinese * faq_keymap.md to zh-cn faq_keymap.md to zh-cn --- docs/zh-cn/faq_build.md | 150 ++++++++++++++++++++++++++++++ docs/zh-cn/faq_debug.md | 233 +++++++++++++++++++++++++++++++++++++++++++++++ docs/zh-cn/faq_keymap.md | 212 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 595 insertions(+) create mode 100644 docs/zh-cn/faq_build.md create mode 100644 docs/zh-cn/faq_debug.md create mode 100644 docs/zh-cn/faq_keymap.md (limited to 'docs') diff --git a/docs/zh-cn/faq_build.md b/docs/zh-cn/faq_build.md new file mode 100644 index 0000000000..60d902007c --- /dev/null +++ b/docs/zh-cn/faq_build.md @@ -0,0 +1,150 @@ +# 关于构建的常见问题 + +本页所写是QMK构建的常见问题.如果你还没有进行过编译,就看一下[构建环境搭建](getting_started_build_tools.md) 和 [make的说明](getting_started_make_guide.md). + +## 如果您不能在Linux上编程 +您需要适当的权限才能操作设备。对于Linux用户, 请参阅下方有关`udev`规则的说明。如果您对`udev`有问题，解决方法是用`sudo`命令。如果您不熟悉此命令，使用`man sudo`查看其手册或[看这个网页](https://linux.die.net/man/8/sudo). + +在你的主控是ATMega32u4时，以下是使用`sudo`命令的样例： + + $ sudo dfu-programmer atmega32u4 erase --force + $ sudo dfu-programmer atmega32u4 flash your.hex + $ sudo dfu-programmer atmega32u4 reset + +或只用； + + $ sudo make ::dfu + +使用`sudo`运行`make`一般来说**不**推荐，如果可能，尽量使用前一种方法之一。 + +### Linux `udev` 规则 +在Linux上，您需要适当的权限才能访问MCU。你也可以在刷新固件时使用 `sudo`，或把这些文件放到`/etc/udev/rules.d/`。 + +**/etc/udev/rules.d/50-atmel-dfu.rules:** +``` +# Atmel ATMega32U4 +SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff4", MODE:="0666" +# Atmel USBKEY AT90USB1287 +SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ffb", MODE:="0666" +# Atmel ATMega32U2 +SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff0", MODE:="0666" +``` + +**/etc/udev/rules.d/52-tmk-keyboard.rules:** +``` +# tmk键盘产品 https://github.com/tmk/tmk_keyboard +SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666" +``` +**/etc/udev/rules.d/54-input-club-keyboard.rules:** + +``` +# Input Club keyboard bootloader +SUBSYSTEMS=="usb", ATTRS{idVendor}=="1c11", MODE:="0666" +``` + +### 串行设备在Linux上检测不到bootloader模式 +确保您的内核对您的设备有相应的支持。 如果你的设备是 USB ACM, 比如Pro Micro (Atmega32u4)，就要加上`CONFIG_USB_ACM=y`. 其他设备可能需要`USB_SERIAL` 及其任何子选项。 + +## DFU Bootloader的未知设备 + +如果您在使用Windows来刷新键盘的时候碰到了问题，检查设备管理器。如果在键盘处于 "bootloader模式"时你看到 "未知设备"，说明你可能面临设备问题。 + +重新运行MSYS2上的安装脚本或许会凑效（比如在MSYS2/WSL运行 `./util/qmk_install.sh`) 或者重新安装QMK工具箱也可能会解决你的问题。 + +如果以上方法还是短针攻疽，那您可能需要使用[Zadig Utility](https://zadig.akeo.ie/)。下载此程序, 找到设备问题, 然后选择 `WinUSB`选项, 然后点击"Reinstall driver"。完成后再试试刷新你的键盘。倘若依然徒劳无功，那就尝试所有选项直到好用为止。 + +?> 事实上没有一个驱动的最佳选择，有些选项就是和某些系统相辅相成。但libUSB和WinUSB似乎也算是这里的最佳选择了。 +如果bootloader在设备列表中没有显示，你可能要使能 "List all devices"选项在选项菜单中`Options`，然后找到有问题的bootloader设备。(译者注：在win10中可能为 查看-显示隐藏的设备) + + +## WINAVR已淘汰 +不再推荐使用WINAVR，使用可能会导致问题 +详情请见[TMK Issue #99](https://github.com/tmk/tmk_keyboard/issues/99). + +## USB VID 和 PID +你可以在编辑`config.h`时使用任何你想用的ID值。实际上，使用任何可能未使用的ID都没有问题，除了有极低的与其他产品发生冲突的可能性。 + +大多数QMK主板使用`0xFEED`作为vendor ID。您应该查看其他键盘，以确保选择了唯一的Product ID。 + +也要看看这个。 +https://github.com/tmk/tmk_keyboard/issues/150 + +一也可以在下方链接购买一个唯一的VID:PID。不过个人使用似乎用不着这个。 +- http://www.obdev.at/products/vusb/license.html +- http://www.mcselec.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=92&option=com_phpshop&Itemid=1 + +## Cortex: `cstddef: No such file or directory` +在Ubuntu 14.04上的GCC 4.8 会出现这种问题需要用这个PPA升级到4.9。 +https://launchpad.net/~terry.guo/+archive/ubuntu/gcc-arm-embedded + +https://github.com/tmk/tmk_keyboard/issues/212 +https://github.com/tmk/tmk_keyboard/wiki/mbed-cortex-porting#compile-error-cstddef +https://developer.mbed.org/forum/mbed/topic/5205/ + +## `clock_prescale_set` and `clock_div_1` Not Available +你的工具链太旧了不支持MCU。比如WinAVR 20100110就不支持ATMega32u2. + +``` +Compiling C: ../../tmk_core/protocol/lufa/lufa.c +avr-gcc -c -mmcu=atmega32u2 -gdwarf-2 -DF_CPU=16000000UL -DINTERRUPT_CONTROL_ENDPOINT -DBOOTLOADER_SIZE=4096 -DF_USB=16000000UL -DARCH=ARCH_AVR8 -DUSB_DEVICE_ONLY -DUSE_FLASH_DESCRIPTORS -DUSE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -DFIXED_CONTROL_ENDPOINT_SIZE=8 -DFIXED_NUM_CONFIGURATIONS=1 -DPROTOCOL_LUFA -DEXTRAKEY_ENABLE -DCONSOLE_ENABLE -DCOMMAND_ENABLE -DVERSION=unknown -Os -funsigned-char -funsigned-bitfields -ffunction-sections -fdata-sections -fno-inline-small-functions -fpack-struct -fshort-enums -fno-strict-aliasing -Wall -Wstrict-prototypes -Wa,-adhlns=obj_alps64/protocol/lufa/lufa.lst -I. -I../../tmk_core -I../../tmk_core/protocol/lufa -I../../tmk_core/protocol/lufa/LUFA-git -I../../tmk_core/common -std=gnu99 -include config.h -MMD -MP -MF .dep/obj_alps64_protocol_lufa_lufa.o.d ../../tmk_core/protocol/lufa/lufa.c -o obj_alps64/protocol/lufa/lufa.o +../../tmk_core/protocol/lufa/lufa.c: In function 'setup_mcu': +../../tmk_core/protocol/lufa/lufa.c:575: warning: implicit declaration of function 'clock_prescale_set' +../../tmk_core/protocol/lufa/lufa.c:575: error: 'clock_div_1' undeclared (first use in this function) +../../tmk_core/protocol/lufa/lufa.c:575: error: (Each undeclared identifier is reported only once +../../tmk_core/protocol/lufa/lufa.c:575: error: for each function it appears in.) +make: *** [obj_alps64/protocol/lufa/lufa.o] Error 1 +``` + + +## AVR的BOOTLOADER_SIZE +注意Teensy2.0++ bootloader的大小是2048字节。有些Makefile注释错了。 + +``` +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 2048 +# Atmel DFU loader 4096 (TMK Alt Controller) +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=2048 +``` + +## 在MacOS上 `avr-gcc: internal compiler error: Abort trap: 6 (program cc1)` +这是brew更新的问题，导致AVR GCC依赖的符号链接被损坏。 + +解决方案是移除并重新安装所有受影响的模块。 + +``` +brew rm avr-gcc +brew rm dfu-programmer +brew rm dfu-util +brew rm gcc-arm-none-eabi +brew rm avrdude +brew install avr-gcc +brew install dfu-programmer +brew install dfu-util +brew install gcc-arm-none-eabi +brew install avrdude +``` + +### avr-gcc 8.1 和 LUFA + +如果你把avr-gcc升级到7以上你可能会遇到关于LUFA的问题。比如: + +`lib/lufa/LUFA/Drivers/USB/Class/Device/AudioClassDevice.h:380:5: error: 'const' attribute on function returning 'void'` + +那你就需要在brew中把avr-gcc回退到7。 + +``` +brew uninstall --force avr-gcc +brew install avr-gcc@7 +brew link --force avr-gcc@7 +``` + +### 我刷新了我的键盘但是键盘不工作/按键没有注册 - 而且还是ARM的 (rev6 planck, clueboard 60, hs60v2, etc...) (Feb 2019) +由于EEPROM在基于ARM的芯片上的工作原理，保存的设置可能不再有效。这会影响默认层，而且*或许*在某些情况下，会使键盘不好用，我们仍在调查这些情况。重置EEPROM将解决此问题。 + +[Planck rev6键盘重置EEPROM](https://cdn.discordapp.com/attachments/473506116718952450/539284620861243409/planck_rev6_default.bin) 是用于强制重置EEPROM的。刷入这个文件后，再次刷入正常固件，这会将键盘恢复到_正常_工作状态。 +[Preonic rev3键盘重置EEPROM](https://cdn.discordapp.com/attachments/473506116718952450/537849497313738762/preonic_rev3_default.bin) + +如果以任何形式启用了bootmagic， 那么您还需要(看[Bootmagic文档](feature_bootmagic.md) 以及键盘信息，以了解如何执行此操作的详细信息). diff --git a/docs/zh-cn/faq_debug.md b/docs/zh-cn/faq_debug.md new file mode 100644 index 0000000000..ca8b3fd25d --- /dev/null +++ b/docs/zh-cn/faq_debug.md @@ -0,0 +1,233 @@ +# 调试的常见问题 + +本篇详细介绍了人们在键盘故障排除时的各种常见问题。 + +# 调试控制台 + +## `hid_listen` 无法识别设备 +当设备的调试控制台未就绪时，您将看到如下内容： + +``` +Waiting for device:......... +``` + +插入设备后，*hid_listen*找到该设备，您将收到以下消息： + +``` +Waiting for new device:......................... +Listening: +``` + +如果您无法获得这条“Listening:”消息，请尝试在[Makefile]中使用 `CONSOLE_ENABLE=yes` + +在Linux这样的操作系统上，你可能需要一些权限。 +- 使用`sudo hid_listen` + +## 控制台没有返回消息 +检查: +- *hid_listen* 找到了你的设备。看前面。 +- 输入**Magic**+d打开调试。详见[Magic Commands](https://github.com/tmk/tmk_keyboard#magic-commands)。 +- 设置`debug_enable=true` ，一般存在于**matrix.c**的`matrix_init()`中。 +- 尝试使用'print'函数而不要用调试输出。详见**common/print.h**。 +- 断开其他有控制台功能的设备。 详见[Issue #97](https://github.com/tmk/tmk_keyboard/issues/97)。 + +## Linux或UNIX这样的系统如何请求超级用户权限 +用'sudo'来执行*hid_listen*就有权限了。 +``` +$ sudo hid_listen +``` + +或者把一个文件放到规则文件夹来为TMK设备添加*udev规则*，不同系统的目录可能有所不同。 + +文件: /etc/udev/rules.d/52-tmk-keyboard.rules(在Ubuntu系统的情况下) +``` +# tmk keyboard products https://github.com/tmk/tmk_keyboard +SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666" +``` + +*** + +# 其他 +## 安全注意事项 + +你应该不想要把你的键盘变成"砖头"吧，就是变成没法重写固件的那种。 +下面讲解一些参数来告诉你什么风险很大（其实也不是很大）。 + +- 假如你键盘表面没有设计重置键"RESET", 那你要进入bootloader的话就要按PCB上的RESET了。 + 按PCB上的RESET要拧开键盘底部。 +- 如果 tmk_core / common 里面的文件丢失键盘可能失灵。 +- .hex太大可能不太好; `make dfu` 会删除块，检验大小（咦?好像反了...）。 + 一但出错，刷新键盘失败的话就困在DFU出不去了。 + - 所以, 要知道大小限制。 Planck键盘上.hex文件最大大小是 is 7000h (十进制是28672) + +``` +Linking: .build/planck_rev4_cbbrowne.elf [OK] +Creating load file for Flash: .build/planck_rev4_cbbrowne.hex [OK] + +Size after: + text data bss dec hex filename + 0 22396 0 22396 577c planck_rev4_cbbrowne.hex +``` + + - 上面那个文件大小是 22396/577ch，比28672/7000h小 + - 当你有一个合适的.hex文件时，你就要重试加载那个了 + - 您在键盘Makefile中的某些选项可能消耗额外内存；注意以下这几个 + BOOTMAGIC_ENABLE, MOUSEKEY_ENABLE, EXTRAKEY_ENABLE, CONSOLE_ENABLE, API_SYSEX_ENABLE +- DFU 工具/不/可以写入bootloader (unless you throw in extra fruit salad of options), + 所以还是有点危险的 +- EEPROM大概有100000次循环寿命。不要总是频繁重写固件；EEPROM会玩坏的。 +## 全键无冲不好用 +首先你要在**Makefile**用如下命令编译固件`NKRO_ENABLE`。 + +全键无冲还不好用的话试着用`Magic` **N** 命令(默认是`LShift+RShift+N`)。这个命令会在**全键无冲**和**六键无冲**之间临时切换。有些情况**全键无冲**不好用你就需要使用**六键无冲**模式，尤其是在BIOS中。 + +如果你的固件使用`BOOTMAGIC_ENABLE`编译的你要用`BootMagic` **N** 命令(默认`Space+N`)打开开关。这个设置保存在EEPROM中并保存在电源循环中。 + + +https://github.com/tmk/tmk_keyboard#boot-magic-configuration---virtual-dip-switch + + +## 指点杆需要复位电路(PS/2 鼠标支持) +如果没有复位电路，由于硬件初始化不正确，您将得到不一致的结果。查看TPM754复位电路。 + +- http://geekhack.org/index.php?topic=50176.msg1127447#msg1127447 +- http://www.mikrocontroller.net/attachment/52583/tpm754.pdf + + +## 矩阵不可读16以上的列 +当列超过16时[matrix.h]的`read_cols()`中，用`1UL<<16`而不要用`1<<16`。 + +在C语言中`1` 是一个[int] 类型的[16 bit]值，在AVR中你不能左移大于15次。如果你使用`1<<16`的话会得到意外的零。你要用 [unsigned long]类型，比如`1UL`。 + +http://deskthority.net/workshop-f7/rebuilding-and-redesigning-a-classic-thinkpad-keyboard-t6181-60.html#p146279 + + +## Bootloader跳转不好用 +在**Makefile**中正确配置**Makefile**大小。如果分区大小不正确，引导加载程序可能无法从**Magic command**和**Boot Magic**加载。 +``` +# bootloader字节数： +# Atmel DFU loader(ATmega32U4) 4096 +# Atmel DFU loader(AT90USB128) 8192 +# LUFA bootloader(ATmega32U4) 4096 +# Arduino Caterina(ATmega32U4) 4096 +# USBaspLoader(ATmega***) 2048 +# Teensy halfKay(ATmega32U4) 512 +# Teensy++ halfKay(AT90USB128) 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 +``` +AVR引导大小是通过**BOOTSZ**熔丝位来设置的。查阅你单片机的datasheet。 +记住，datasheet用的是**Word**(2字节)表示大小和地址，TMK用的是**Byte**。 + +AVR引导部分位于闪存的末尾，如下所示（Application是应用区，Bootloader是引导区）。 +``` +byte Atmel/LUFA(ATMega32u4) byte Atmel(AT90SUB1286) +0x0000 +---------------+ 0x00000 +---------------+ + | | | | + | | | | + | Application | | Application | + | | | | + = = = = + | | 32KB-4KB | | 128KB-8KB +0x6000 +---------------+ 0x1E000 +---------------+ + | Bootloader | 4KB | Bootloader | 8KB +0x7FFF +---------------+ 0x1FFFF +---------------+ + + +byte Teensy(ATMega32u4) byte Teensy++(AT90SUB1286) +0x0000 +---------------+ 0x00000 +---------------+ + | | | | + | | | | + | Application | | Application | + | | | | + = = = = + | | 32KB-512B | | 128KB-2KB +0x7E00 +---------------+ 0x1FC00 +---------------+ + | Bootloader | 512B | Bootloader | 2KB +0x7FFF +---------------+ 0x1FFFF +---------------+ +``` + +详情请见下方issue。 +https://github.com/tmk/tmk_keyboard/issues/179 + +如果你使用TeensyUSB, 有一个[已知bug](https://github.com/qmk/qmk_firmware/issues/164)硬件重置按钮阻止软件定义重置键工作。重新插拔键盘就好了。 + +## 特殊额外键不起作用(系统，音频控制键) +你要在`rules.mk`定义`EXTRAKEY_ENABLE`在QMK中使用它们。 + +``` +EXTRAKEY_ENABLE = yes # 音频控制和系统控制 +``` + +## 睡眠唤醒不好用 + +在Windows查看设备管理器中该键盘设备属性中电源管理选项卡中的`允许此设备唤醒计算机(O)`是否勾选。同时看一眼BIOS设置。 + +在主机睡眠时按下任何键都可以唤醒了。 + +## 使用Arduino? + +**注意Arduino的针脚名字和主控芯片的不一样。** 比如, Arduino的`D0`并不是`PD0`。自己用原理图捋一下电路。 + +- http://arduino.cc/en/uploads/Main/arduino-leonardo-schematic_3b.pdf +- http://arduino.cc/en/uploads/Main/arduino-micro-schematic.pdf + +Arduino Leonardo和micro使用**ATMega32U4**，该芯片TMK可用，但Arduino的bootloader会导致问题。 + + +## 在USB AVR使用PF4-7针脚? +你要置位MCUCR寄存器JTD位来将PF4-7设置为GPIO。这些针脚默认是JTAG功能。 像ATMega*U* or AT90USB*这样的MCU会受影响。 + +如果是用Teensy的话就不需要了。Tennsy自带JTAGEN位未编程来失能该功能。 + +代码如下。 +``` + // F接口JTAG失能。在四个周期内写入两次JTD位。 + MCUCR |= (1< +![键盘设计图](https://i.imgur.com/5wsh5wM.png) + +## 我有一些键变成了其他功能或者不工作了 + +QMK有两个功能，Bootmagic和命令行，它允许您在运行中更改键盘的行为。该功能包括但不仅限于, 交换Ctrl/Caps，关闭界面，交换Alt/Gui，交换 Backspace/Backslash，禁用所有键，以及其他的行为改变。 + +快速解决方法是插入键盘时按住`Space`+`Backspace`。该操作将重置已保存设置，让这些键回复初始功能。这招不好用的话参阅下方： + +* [Bootmagic](feature_bootmagic.md) +* [命令](feature_command.md) + +## 菜单键不好用 + +现在大多数键盘 `KC_RGUI`和`KC_RCTL`中间的键子叫做`KC_APP`。这是因为在这个键子发明之前相关标准里就已经有键叫做`MENU(菜单)`了，所以微软叫他`APP(应用)`键。 + +## `KC_SYSREQ` 不工作 +使用抓屏的键码(`KC_PSCREEN`或`KC_PSCR`)而不用`KC_SYSREQ`。组合键'Alt + Print Screen'会被当作'System request'。 + +见[issue #168](https://github.com/tmk/tmk_keyboard/issues/168)和 +* http://en.wikipedia.org/wiki/Magic_SysRq_key +* http://en.wikipedia.org/wiki/System_request + +## 电源键不工作 + +这有点让人困惑,QMK有两个"Power(电源)"键码: `KC_POWER` 在键盘/小键盘的HID使用页面中，`KC_SYSTEM_POWER` (或者叫`KC_PWR`)在用户页。 + +前者只能被macOS识别，但是后者，即`KC_SLEP`和`KC_WAKE`三大主要操作系统全都支持，所以推荐使用这两个。Windows下这些键立即生效，macOS要长按直到弹出对话框。 + +## 自动大小写锁定 +可以解决'the'问题(正常应为The)。我经常在输入'The'时不慎输入了'the'或者'THe'。自动大小写锁定可以修正此类问题。详见下方链接。 +https://github.com/tmk/tmk_keyboard/issues/67 + +## 修改 键/层 卡住 +除非正确配置层切换，否则修改键或层可能会卡住。 +对于修改键和图层操作，必须把`KC_TRANS`放到目标层的相同位置，用于注销修改键或在释放事件时返回到上一层。 +* https://github.com/tmk/tmk_core/blob/master/doc/keymap.md#31-momentary-switching +* http://geekhack.org/index.php?topic=57008.msg1492604#msg1492604 +* https://github.com/tmk/tmk_keyboard/issues/248 + + +## 机械自锁开关支持Mechanical Lock Switch Support + +本功能用于*机械自锁开关*比如[this Alps one](http://deskthority.net/wiki/Alps_SKCL_Lock)。你可以通过向`config.h`添加以下宏来使能该功能： + +``` +#define LOCKING_SUPPORT_ENABLE +#define LOCKING_RESYNC_ENABLE +``` + +在使能该功能后，要在键盘中使用`KC_LCAP`, `KC_LNUM` 和 `KC_LSCR`这三个键码。 + +远古机械键盘偶尔会有自锁机械开关，现在几乎没有了。***大多数情况下你不需要使用该功能，且要使用`KC_CAPS`, `KC_NLCK`和`KC_SLCK`这三个键码。*** + +## 输入ASCII之外的特殊字符比如Cédille 'Ç' +没有在所有系统中输入这个的通用方法。你要定义针对你的特定操作系统或布局的**宏**。 + +比如看这个**宏**代码的文章。 + +http://deskthority.net/workshop-f7/tmk-keyboard-firmware-collection-t4478-120.html#p195620 + +在**Windows**上，可以用`AltGr`键或**Alt码**。 +* http://en.wikipedia.org/wiki/AltGr_key +* https://zh.wikipedia.org/wiki/Alt%E7%A0%81 + +在**Mac OS**定义`Option`键组合。 +* https://zh.wikipedia.org/wiki/Option%E9%94%AE#%E6%9B%BF%E4%BB%A3%E9%94%AE%E7%9B%98%E8%BE%93%E5%85%A5 + +在**Xorg**可以改用`compose`键。 +* http://en.wikipedia.org/wiki/Compose_key + +下方链接查看**Unicode**输入。 +* http://en.wikipedia.org/wiki/Unicode_input + +## macOS上的`Fn` + +不像大多数FN键，苹果上那个有自己的键码...呃，基本上算吧。 他取缔了基本6键无冲HID报告的第六个键码 -- 所以苹果键盘其实是5键无冲的。 + +技术上说QMK可以发送这个键。但是，这样做需要修改报告格式以添加FN键的状态。这还不是最糟糕的，你的键盘的VID和PID和真的苹果键盘不一样的话还不会被识别。 +QMK官方支持这个会被律师函的，所以就当我没说过。 + +详见[issue#2179](https://github.com/qmk/qmk_firmware/issues/2179)。 + + +## Mac OSX的媒体控制键 +#### KC_MNXT 和 KC_MPRV 在Mac上不好用 +使用 `KC_MFFD`(`KC_MEDIA_FAST_FORWARD`) 和 `KC_MRWD`(`KC_MEDIA_REWIND`)，不要用 `KC_MNXT` 和 `KC_MPRV`. +详见 https://github.com/tmk/tmk_keyboard/issues/195 + + +## Mac OSX中支持那些键? +你可以从此源码中获知在OSX中支持哪些键码 + +`usb_2_adb_keymap` 阵列映射 键盘/小键盘 页用于ADB扫描码(OSX内部键码). + +https://opensource.apple.com/source/IOHIDFamily/IOHIDFamily-606.1.7/IOHIDFamily/Cosmo_USB2ADB.c + +`IOHIDConsumer::dispatchConsumerEvent`会处理用户页面用法。 + +https://opensource.apple.com/source/IOHIDFamily/IOHIDFamily-606.1.7/IOHIDFamily/IOHIDConsumer.cpp + + +## Mac OSX中的JIS键 +岛国特别键比如`無変換(Muhenkan)`, `変換(Henkan)`, `ひらがな(hiragana)`OSX是不是别的。You can use **Seil** to enable those keys, try following options. + +* 在电脑键盘上使能NFER键 +* 在电脑键盘上使能XFER键 +* 在电脑键盘上使能KATAKAN键 + +https://pqrs.org/osx/karabiner/seil.html + + +## RN-42蓝牙模块与Karabiner不能有效协同工作 +Karabiner - Mac OSX的改键软件 - 默认RN-42模块是不会被响应的。想要Karabiner和你的键盘协同工作你要使能此选项： +https://github.com/tekezo/Karabiner/issues/403#issuecomment-102559237 + +此问题详见下方链接。 +https://github.com/tmk/tmk_keyboard/issues/213 +https://github.com/tekezo/Karabiner/issues/403 + + +## Esc 和 ` 双功能键 + +请见[Grave Escape](feature_grave_esc.md)功能。 + +## 右侧双角色修改键(诸如Shift、Alt等有修改其他键作用的键)变箭头键 +右侧修改键单击时会变为箭头键，长按就还是修改键。在TMK中双角色键称之为**TAP**. +``` + +#include "keymap_common.h" + + +/* 用TMK双角色键功能实现右侧修改键改箭头键 + * + * https://github.com/tmk/tmk_core/blob/master/doc/keymap.md#213-modifier-with-tap-keydual-role + * https://en.wikipedia.org/wiki/Modifier_key#Dual-role_keys + */ +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* 0: qwerty */ + [0] = LAYOUT( \ + ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, NUHS,BSPC, \ + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, \ + LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,ENT, \ + LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH,FN0, ESC, \ + FN4, LGUI,LALT, SPC, APP, FN2, FN1, FN3), + [1] = LAYOUT( \ + GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS,TRNS, \ + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,\ + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,FN5, TRNS, \ + TRNS,TRNS,TRNS, TRNS, TRNS,FN7, FN6, FN8), +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_UP), + [1] = ACTION_MODS_TAP_KEY(MOD_RGUI, KC_DOWN), + [2] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_LEFT), + [3] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_RIGHT), + [4] = ACTION_LAYER_MOMENTARY(1), + [5] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_PGUP), + [6] = ACTION_MODS_TAP_KEY(MOD_RGUI, KC_PGDN), + [7] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_HOME), + [8] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_END), +}; + +``` + +双角色键说明: https://en.wikipedia.org/wiki/Modifier_key#Dual-role_keys + + +## Mac OSX的弹出键 +`KC_EJCT` 键码在OSX可以使用 https://github.com/tmk/tmk_keyboard/issues/250 +似乎Windows10会忽略该键码，Linux/Xorg可以识别该键码但默认不映射。 + +目前尚不清楚如何在真正的苹果键盘按出弹出键。HHKB使用`F20`用于弹出键(`Fn+f`)，该功能在MAC模式有效但不保证与苹果弹出键码相符。 + + +## `action_util.c`中的 `weak_mods`和`real_mods`是什么 +___待改善___ + +real_mods 用于保存实际(物理)修改键的实际状态。 +weak_mods 用于保存虚拟或临时修改键，它将不会影响实际修改键。 + +以按下左侧Shift键然后输入ACTION_MODS_KEY(LSHIFT, KC_A)为例， + +在weak_mods时， +* (1) 按下不抬起左Shift: real_mods |= MOD_BIT(LSHIFT) +* (2) 按 ACTION_MODS_KEY(LSHIFT, KC_A): weak_mods |= MOD_BIT(LSHIFT) +* (3) 抬起 ACTION_MODS_KEY(LSHIFT, KC_A): weak_mods &= ~MOD_BIT(LSHIFT) +real_mods 还是保持在修改状态。 + +在没有weak_mods时， +* (1) 按下不抬起左Shift: real_mods |= MOD_BIT(LSHIFT) +* (2) 按 ACTION_MODS_KEY(LSHIFT, KC_A): real_mods |= MOD_BIT(LSHIFT) +* (3) 抬起 ACTION_MODS_KEY(LSHIFT, KC_A): real_mods &= ~MOD_BIT(LSHIFT) +此时real_mods失去‘实际左Shift’的状态。 + +weak_mods和real_mods现已全部加入键盘数据包发送豪华套餐。 +https://github.com/tmk/tmk_core/blob/master/common/action_util.c#L57 -- cgit 1.4.1 From dcb274b2867adeb0f516eb709c7f651aa61774a6 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Wed, 22 May 2019 20:55:52 -0700 Subject: Fix links Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> --- docs/_summary.md | 4 ++-- docs/features.md | 6 +++--- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'docs') diff --git a/docs/_summary.md b/docs/_summary.md index 1c3153b040..02254a9d81 100644 --- a/docs/_summary.md +++ b/docs/_summary.md @@ -54,12 +54,12 @@ * [Bootmagic](feature_bootmagic.md) * [Combos](feature_combo) * [Command](feature_command.md) - * [Debounce API](feature_debuonce.md) + * [Debounce API](feature_debounce_type.md) * [Dynamic Macros](feature_dynamic_macros.md) * [Encoders](feature_encoders.md) * [Grave Escape](feature_grave_esc.md) * [Haptic Feedback](feature_haptic_feedback.md) - * [HD44780 LED](feature_hd44780.md) + * [HD44780 LCD Controller](feature_hd44780.md) * [Key Lock](feature_key_lock.md) * [Layouts](feature_layouts.md) * [Leader Key](feature_leader_key.md) diff --git a/docs/features.md b/docs/features.md index eb3f26d6a8..ac9aad3948 100644 --- a/docs/features.md +++ b/docs/features.md @@ -11,7 +11,7 @@ QMK has a staggering number of features for building your keyboard. It can take * [Bootmagic](feature_bootmagic.md) - Adjust the behavior of your keyboard using hotkeys. * [Combos](feature_combo.md) - Custom actions for multiple key holds. * [Command](feature_command.md) - Runtime version of bootmagic (Formerly known as "Magic"). -* [Debounce API](feature_debuonce.md) - Customization of debouncing algorithms, and the ability to add more/custom debouncing. +* [Debounce API](feature_debounce_type.md) - Customization of debouncing algorithms, and the ability to add more/custom debouncing. * [Dynamic Macros](feature_dynamic_macros.md) - Record and playback macros from the keyboard itself. * [Encoders](feature_encoders.md) - Rotary encoders! * [Grave Escape](feature_grave_esc.md) - Lets you use a single key for Esc and Grave. @@ -23,7 +23,7 @@ QMK has a staggering number of features for building your keyboard. It can take * [LED Matrix](feature_led_matrix.md) - LED Matrix single color lights for per key lighting (Single Color, not RGB). * [Macros](feature_macros.md) - Send multiple key presses when pressing only one physical key. * [Mouse keys](feature_mouse_keys.md) - Control your mouse pointer from your keyboard. -* [OLED Driver](feature_oled_driver) - Add OLED screens to your keyboard. +* [OLED Driver](feature_oled_driver.md) - Add OLED screens to your keyboard. * [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys) - Sticky Keys, lets hit a key rather than holding it. * [Pointing Device](feature_pointing_device.md) - Framework for connecting your custom pointing device to your keyboard. * [PS2 Mouse](feature_ps2_mouse.md) - Driver for connecting a PS/2 mouse directly to your keyboard. @@ -37,4 +37,4 @@ QMK has a staggering number of features for building your keyboard. It can take * [Thermal Printer](feature_thermal_printer.md) - Connect a thermal printer to your keyboard to be able to toggle on a printed log of everything you type. * [Unicode](feature_unicode.md) - Unicode input support. * [Userspace](feature_userspace.md) - Share code between different keymaps and keyboards. -* [Velocikey](feature_velocikey.md) - Allows changes in animation speed based on WPM/Typing speed. +* [Velocikey](feature_velocikey.md) - Allows changes in RGB animation speed based on WPM/Typing speed. -- cgit 1.4.1 From c97315dc5a355636e1f514a93c28ea2842002742 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Wed, 22 May 2019 20:59:01 -0700 Subject: Additional link fixes Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> --- docs/_summary.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'docs') diff --git a/docs/_summary.md b/docs/_summary.md index 02254a9d81..8a40ccd7f2 100644 --- a/docs/_summary.md +++ b/docs/_summary.md @@ -52,7 +52,7 @@ * [Backlight](feature_backlight.md) * [Bluetooth](feature_bluetooth.md) * [Bootmagic](feature_bootmagic.md) - * [Combos](feature_combo) + * [Combos](feature_combo.md) * [Command](feature_command.md) * [Debounce API](feature_debounce_type.md) * [Dynamic Macros](feature_dynamic_macros.md) @@ -66,7 +66,7 @@ * [LED Matrix](feature_led_matrix.md) * [Macros](feature_macros.md) * [Mouse Keys](feature_mouse_keys.md) - * [OLED Driver](feature_oled_driver) + * [OLED Driver](feature_oled_driver.md) * [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys) * [Pointing Device](feature_pointing_device.md) * [PS/2 Mouse](feature_ps2_mouse.md) -- cgit 1.4.1 From 36f427f40cc64fa2dcd6da4eae20d467e88c0bd9 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Thu, 23 May 2019 10:29:18 -0700 Subject: Fix typo --- docs/features.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'docs') diff --git a/docs/features.md b/docs/features.md index ac9aad3948..f9ef51eae2 100644 --- a/docs/features.md +++ b/docs/features.md @@ -24,7 +24,7 @@ QMK has a staggering number of features for building your keyboard. It can take * [Macros](feature_macros.md) - Send multiple key presses when pressing only one physical key. * [Mouse keys](feature_mouse_keys.md) - Control your mouse pointer from your keyboard. * [OLED Driver](feature_oled_driver.md) - Add OLED screens to your keyboard. -* [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys) - Sticky Keys, lets hit a key rather than holding it. +* [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys) - Sticky Keys, lets you hit a key rather than holding it. * [Pointing Device](feature_pointing_device.md) - Framework for connecting your custom pointing device to your keyboard. * [PS2 Mouse](feature_ps2_mouse.md) - Driver for connecting a PS/2 mouse directly to your keyboard. * [RGB Light](feature_rgblight.md) - RGB lighting for your keyboard. -- cgit 1.4.1 From fe8c2209ca9172352cb46cc6cf7800e4998849ea Mon Sep 17 00:00:00 2001 From: fauxpark Date: Sat, 25 May 2019 03:05:29 +1000 Subject: Document MT keycode in keycodes.md --- docs/keycodes.md | 35 ++++++++++++++++++----------------- 1 file changed, 18 insertions(+), 17 deletions(-) (limited to 'docs') diff --git a/docs/keycodes.md b/docs/keycodes.md index e9cfd34252..3ff87856e4 100644 --- a/docs/keycodes.md +++ b/docs/keycodes.md @@ -344,23 +344,24 @@ This is a reference only. Each group of keys links to the page documenting their ## [Mod-Tap Keys](feature_advanced_keycodes.md#mod-tap) -|Key |Aliases |Description | -|------------|-----------------------------------------------------------------|-------------------------------------------------------| -|`LCTL_T(kc)`|`CTL_T(kc)` |Left Control when held, `kc` when tapped | -|`LSFT_T(kc)`|`SFT_T(kc)` |Left Shift when held, `kc` when tapped | -|`LALT_T(kc)`|`ALT_T(kc)` |Left Alt when held, `kc` when tapped | -|`LGUI_T(kc)`|`LCMD_T(kc)`, `LWIN_T(kc)`, `GUI_T(kc)`, `CMD_T(kc)`, `WIN_T(kc)`|Left GUI when held, `kc` when tapped | -|`RCTL_T(kc)`| |Right Control when held, `kc` when tapped | -|`RSFT_T(kc)`| |Right Shift when held, `kc` when tapped | -|`RALT_T(kc)`|`ALGR_T(kc)` |Right Alt when held, `kc` when tapped | -|`RGUI_T(kc)`|`RCMD_T(kc)`, `RWIN_T(kc)` |Right GUI when held, `kc` when tapped | -|`SGUI_T(kc)`|`SCMD_T(kc)`, `SWIN_T(kc)` |Left Shift and GUI when held, `kc` when tapped | -|`LCA_T(kc)` | |Left Control and Alt when held, `kc` when tapped | -|`LCAG_T(kc)`| |Left Control, Alt and GUI when held, `kc` when tapped | -|`RCAG_T(kc)`| |Right Control, Alt and GUI when held, `kc` when tapped | -|`C_S_T(kc)` | |Left Control and Shift when held, `kc` when tapped | -|`MEH_T(kc)` | |Left Control, Shift and Alt when held, `kc` when tapped| -|`HYPR_T(kc)`|`ALL_T(kc)` |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)| +|Key |Aliases |Description | +|-------------|-----------------------------------------------------------------|-------------------------------------------------------| +|`MT(mod, kc)`| |`mod` when held, `kc` when tapped | +|`LCTL_T(kc)` |`CTL_T(kc)` |Left Control when held, `kc` when tapped | +|`LSFT_T(kc)` |`SFT_T(kc)` |Left Shift when held, `kc` when tapped | +|`LALT_T(kc)` |`ALT_T(kc)` |Left Alt when held, `kc` when tapped | +|`LGUI_T(kc)` |`LCMD_T(kc)`, `LWIN_T(kc)`, `GUI_T(kc)`, `CMD_T(kc)`, `WIN_T(kc)`|Left GUI when held, `kc` when tapped | +|`RCTL_T(kc)` | |Right Control when held, `kc` when tapped | +|`RSFT_T(kc)` | |Right Shift when held, `kc` when tapped | +|`RALT_T(kc)` |`ALGR_T(kc)` |Right Alt when held, `kc` when tapped | +|`RGUI_T(kc)` |`RCMD_T(kc)`, `RWIN_T(kc)` |Right GUI when held, `kc` when tapped | +|`SGUI_T(kc)` |`SCMD_T(kc)`, `SWIN_T(kc)` |Left Shift and GUI when held, `kc` when tapped | +|`LCA_T(kc)` | |Left Control and Alt when held, `kc` when tapped | +|`LCAG_T(kc)` | |Left Control, Alt and GUI when held, `kc` when tapped | +|`RCAG_T(kc)` | |Right Control, Alt and GUI when held, `kc` when tapped | +|`C_S_T(kc)` | |Left Control and Shift when held, `kc` when tapped | +|`MEH_T(kc)` | |Left Control, Shift and Alt when held, `kc` when tapped| +|`HYPR_T(kc)` |`ALL_T(kc)` |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)| ## [RGB Lighting](feature_rgblight.md) -- cgit 1.4.1 From 3ef425423a9b8399b02c8240b4f56c3713f984f6 Mon Sep 17 00:00:00 2001 From: Elliot Powell <32494740+e11i0t23@users.noreply.github.com> Date: Thu, 30 May 2019 16:53:43 +0100 Subject: Update feature_encoders.md Fix missing closing comment after second encoder --- docs/feature_encoders.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'docs') diff --git a/docs/feature_encoders.md b/docs/feature_encoders.md index dd12c91ce3..9ac97a9a16 100644 --- a/docs/feature_encoders.md +++ b/docs/feature_encoders.md @@ -38,7 +38,7 @@ or `keymap.c`: } else { tap_code(KC_PGUP); } - } else if (index == 1) { /* Second encoder + } else if (index == 1) { /* Second encoder */ if (clockwise) { tap_code(KC_UP); } else { -- cgit 1.4.1 From 9cc5841a91ff1bf95d6895254b43b097a0f365aa Mon Sep 17 00:00:00 2001 From: Elliot Powell <32494740+e11i0t23@users.noreply.github.com> Date: Fri, 31 May 2019 19:04:39 +0100 Subject: Update reference_configurator_support.md We no longer auto generate bootloader into info.json through the website therefore this can be removed --- docs/reference_configurator_support.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'docs') diff --git a/docs/reference_configurator_support.md b/docs/reference_configurator_support.md index a20a6c9adb..784c6d9f75 100644 --- a/docs/reference_configurator_support.md +++ b/docs/reference_configurator_support.md @@ -89,7 +89,7 @@ Once the layout is as desired, move to the Raw Data tab in KLE, and copy the con To convert this data into our JSON, go to the [QMK KLE-JSON Converter](https://qmk.fm/converter/), paste the Raw Data into the Input field, and click the Convert button. After a moment, our JSON data will appear in the Output field. Copy the contents to a new text document, and name the document `info.json`, saving it in the same folder that contains `numpad.h`. -Use the `keyboard_name` object to set the name of the keyboard. The `bootloader` object is deprecated, so it can be deleted. For instruction purposes, we will put each key's object on its own line. This is only to make the file more human-readable, and does not affect the Configurator's functionality. +Use the `keyboard_name` object to set the name of the keyboard. For instruction purposes, we will put each key's object on its own line. This is only to make the file more human-readable, and does not affect the Configurator's functionality. ```json { -- cgit 1.4.1 From d3317a8a66e1a94de0dd795f5c9efe260e674475 Mon Sep 17 00:00:00 2001 From: Elliot Powell <32494740+e11i0t23@users.noreply.github.com> Date: Fri, 31 May 2019 22:44:27 +0100 Subject: [Docs] Update getting_started_introduction.md (#6037) * Update getting_started_introduction.md * Update docs/getting_started_introduction.md Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update docs/getting_started_introduction.md Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update docs/getting_started_introduction.md Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update docs/getting_started_introduction.md Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> --- docs/getting_started_introduction.md | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'docs') diff --git a/docs/getting_started_introduction.md b/docs/getting_started_introduction.md index 3b6a488ed6..e183d77eeb 100644 --- a/docs/getting_started_introduction.md +++ b/docs/getting_started_introduction.md @@ -12,11 +12,17 @@ Within the folder `users` is a directory for each user. This is a place for user ### Keyboard Project Structure -Within the folder `keyboards` and its subfolder `handwired` is a directory for each keyboard project, for example `qmk_firmware/keyboards/clueboard`. Within it you'll find the following structure: +Within the folder `keyboards`, its subfolder `handwired` and its vendor and manufacture subdirectories e.g. `clueboard` is a directory for each keyboard project, for example `qmk_firmware/keyboards/clueboard/2x1800`. Within it, you'll find the following structure: * `keymaps/`: Different keymaps that can be built * `rules.mk`: The file that sets the default "make" options. Do not edit this file directly, instead use a keymap specific `rules.mk`. * `config.h`: The file that sets the default compile time options. Do not edit this file directly, instead use a keymap specific `config.h`. +* `info.json`: The file used for setting layout for QMK Configurator. See [Configurator Support](reference_configurator_support.md) for more information. +* `readme.md`: A brief overview of the keyboard. +* `.h`: This file is where the keyboard layout is defined against the keyboard's switch matrix. +* `.c`: This file is where you can find custom code for the keyboard. + +For more information on project structure, see [QMK Keyboard Guidelines](hardware_keyboard_guidelines.md). ### Keymap Structure -- cgit 1.4.1 From 155be34a1d2b782a73318cc507315b33cc86cc49 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Sun, 2 Jun 2019 09:04:09 +1000 Subject: Parameterise STM32 I2C pin modes and timing parameters. (#5671) I2C timing parameters were seemingly set up for an STM32F303 target MCU, at a specific clock speed. This commit allows specifying the timing parameters via config.h, allowing other STM32 MCUs to be targeted, potentially at different clock frequencies. Alternate function modes for the I2C pins are now also configurable, allowing for remapping to other pins. --- docs/i2c_driver.md | 29 ++++++++++++++++++++++++----- drivers/arm/i2c_master.c | 16 +++++++--------- drivers/arm/i2c_master.h | 40 ++++++++++++++++++++++++++++++++++++++-- 3 files changed, 69 insertions(+), 16 deletions(-) (limited to 'docs') diff --git a/docs/i2c_driver.md b/docs/i2c_driver.md index bb1a2d74ff..4a47a92b11 100644 --- a/docs/i2c_driver.md +++ b/docs/i2c_driver.md @@ -65,11 +65,30 @@ By default the I2C1 hardware driver is assumed to be used. If another hardware d STM32 MCUs allows a variety of pins to be configured as I2C pins depending on the hardware driver used. By default B6 and B7 are set to I2C. You can use these defines to set your i2c pins: -| Variable | Description | Default | -|-------------|----------------------------------------------|---------| -| `I2C1_BANK` | The bank of pins (`GPIOA`, `GPIOB`, `GPIOC`) | `GPIOB` | -| `I2C1_SCL` | The pin number for the SCL pin (0-9) | `6` | -| `I2C1_SDA` | The pin number for the SDA pin (0-9) | `7` | +| Variable | Description | Default | +|--------------------------|----------------------------------------------------------------------------------------------|---------| +| `I2C1_SCL_BANK` | The bank of pins (`GPIOA`, `GPIOB`, `GPIOC`) to use for SCL | `GPIOB` | +| `I2C1_SDA_BANK` | The bank of pins (`GPIOA`, `GPIOB`, `GPIOC`) to use for SDA | `GPIOB` | +| `I2C1_SCL` | The pin number for the SCL pin (0-9) | `6` | +| `I2C1_SDA` | The pin number for the SDA pin (0-9) | `7` | +| `I2C1_BANK` (deprecated) | The bank of pins (`GPIOA`, `GPIOB`, `GPIOC`), superceded by `I2C1_SCL_BANK`, `I2C1_SDA_BANK` | `GPIOB` | + +STM32 MCUs allow for different timing parameters when configuring I2C. These can be modified using the following parameters, using https://www.st.com/en/embedded-software/stsw-stm32126.html as a reference: + +| Variable | Default | +|-----------------------|---------| +| `I2C1_TIMINGR_PRESC` | `15U` | +| `I2C1_TIMINGR_SCLDEL` | `4U` | +| `I2C1_TIMINGR_SDADEL` | `2U` | +| `I2C1_TIMINGR_SCLH` | `15U` | +| `I2C1_TIMINGR_SCLL` | `21U` | + +STM32 MCUs allow for different "alternate function" modes when configuring GPIO pins. These are required to switch the pins used to I2C mode. See the respective datasheet for the appropriate values for your MCU. + +| Variable | Default | +|---------------------|---------| +| `I2C1_SCL_PAL_MODE` | `4` | +| `I2C1_SDA_PAL_MODE` | `4` | You can also overload the `void i2c_init(void)` function, which has a weak attribute. If you do this the configuration variables above will not be used. Please consult the datasheet of your MCU for the available GPIO configurations. The following is an example initialization function: diff --git a/drivers/arm/i2c_master.c b/drivers/arm/i2c_master.c index 7369398cc4..5814375f37 100644 --- a/drivers/arm/i2c_master.c +++ b/drivers/arm/i2c_master.c @@ -32,12 +32,10 @@ static uint8_t i2c_address; -// This configures the I2C clock to 400khz assuming a 72Mhz clock -// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html static const I2CConfig i2cconfig = { - STM32_TIMINGR_PRESC(15U) | - STM32_TIMINGR_SCLDEL(4U) | STM32_TIMINGR_SDADEL(2U) | - STM32_TIMINGR_SCLH(15U) | STM32_TIMINGR_SCLL(21U), + STM32_TIMINGR_PRESC(I2C1_TIMINGR_PRESC) | + STM32_TIMINGR_SCLDEL(I2C1_TIMINGR_SCLDEL) | STM32_TIMINGR_SDADEL(I2C1_TIMINGR_SDADEL) | + STM32_TIMINGR_SCLH(I2C1_TIMINGR_SCLH) | STM32_TIMINGR_SCLL(I2C1_TIMINGR_SCLL), 0, 0 }; @@ -58,13 +56,13 @@ __attribute__ ((weak)) void i2c_init(void) { // Try releasing special pins for a short time - palSetPadMode(I2C1_BANK, I2C1_SCL, PAL_MODE_INPUT); - palSetPadMode(I2C1_BANK, I2C1_SDA, PAL_MODE_INPUT); + palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_INPUT); + palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_INPUT); chThdSleepMilliseconds(10); - palSetPadMode(I2C1_BANK, I2C1_SCL, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN); - palSetPadMode(I2C1_BANK, I2C1_SDA, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN); + palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_ALTERNATE(I2C1_SCL_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN); + palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_ALTERNATE(I2C1_SDA_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN); //i2cInit(); //This is invoked by halInit() so no need to redo it. } diff --git a/drivers/arm/i2c_master.h b/drivers/arm/i2c_master.h index a15f1702dd..1bb74c800f 100644 --- a/drivers/arm/i2c_master.h +++ b/drivers/arm/i2c_master.h @@ -26,9 +26,19 @@ #include "ch.h" #include -#ifndef I2C1_BANK - #define I2C1_BANK GPIOB +#ifdef I2C1_BANK + #define I2C1_SCL_BANK I2C1_BANK + #define I2C1_SDA_BANK I2C1_BANK #endif + +#ifndef I2C1_SCL_BANK + #define I2C1_SCL_BANK GPIOB +#endif + +#ifndef I2C1_SDA_BANK + #define I2C1_SDA_BANK GPIOB +#endif + #ifndef I2C1_SCL #define I2C1_SCL 6 #endif @@ -36,6 +46,32 @@ #define I2C1_SDA 7 #endif +// The default PAL alternate modes are used to signal that the pins are used for I2C +#ifndef I2C1_SCL_PAL_MODE + #define I2C1_SCL_PAL_MODE 4 +#endif +#ifndef I2C1_SDA_PAL_MODE + #define I2C1_SDA_PAL_MODE 4 +#endif + +// The default timing values below configures the I2C clock to 400khz assuming a 72Mhz clock +// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html +#ifndef I2C1_TIMINGR_PRESC + #define I2C1_TIMINGR_PRESC 15U +#endif +#ifndef I2C1_TIMINGR_SCLDEL + #define I2C1_TIMINGR_SCLDEL 4U +#endif +#ifndef I2C1_TIMINGR_SDADEL + #define I2C1_TIMINGR_SDADEL 2U +#endif +#ifndef I2C1_TIMINGR_SCLH + #define I2C1_TIMINGR_SCLH 15U +#endif +#ifndef I2C1_TIMINGR_SCLL + #define I2C1_TIMINGR_SCLL 21U +#endif + #ifndef I2C_DRIVER #define I2C_DRIVER I2CD1 #endif -- cgit 1.4.1 From e0a0d80bd329b4a289e3c4f817c96857c25b0f16 Mon Sep 17 00:00:00 2001 From: ymzcdg <49898694+ymzcdg@users.noreply.github.com> Date: Wed, 5 Jun 2019 02:06:17 +0800 Subject: docs to Mandarin Chinese (#5960) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit * faq_general.md to Chinese faq_general.md to Chinese faq finished * custom_quantum_functions.md to Chinese custom_quantum_functions.md to Chinese * custom_quantum_functions.md fix custom_quantum_functions.md fix * custom_quantum_functions.md fix translate custom_quantum_functions.md fix translate * !ver.English! _summary.md bug fix _summary.md bug fix of English doc. add".md" behind "feature_combo" * !ver.English! custom_quantum_functions.md fix#5869 custom_quantum_functions.md in English : delete redundant "is" . issue#5869 * !ver.English! how_keyboards_work.md link fix change https://en.wikipedia.org/wiki/Unicode_input#Hexadecimal_code_input to https://en.wikipedia.org/wiki/Unicode_input#Hexadecimal_input "#Hexadecimal_code_input" not exist * !English! how_keyboards_work.md add missing "t" Tied to a specific OS a a time (need recompilation when changing OS); change to Tied to a specific OS at a time (need recompilation when changing OS); * _summary.md improve translation _summary.md improve translation * reference_glossary.md into Chinese reference_glossary.md into Chinese 术语表翻译，这个术语表英文版似乎不太全，应该补充英文版，并在中文版添加其他具有中国特色的术语。 --- docs/custom_quantum_functions.md | 2 +- docs/how_keyboards_work.md | 4 +- docs/zh-cn/_summary.md | 66 ++--- docs/zh-cn/custom_quantum_functions.md | 490 +++++++++++++++++++++++++++++++++ docs/zh-cn/faq_general.md | 19 ++ docs/zh-cn/reference_glossary.md | 170 ++++++++++++ 6 files changed, 715 insertions(+), 36 deletions(-) create mode 100644 docs/zh-cn/custom_quantum_functions.md create mode 100644 docs/zh-cn/faq_general.md create mode 100644 docs/zh-cn/reference_glossary.md (limited to 'docs') diff --git a/docs/custom_quantum_functions.md b/docs/custom_quantum_functions.md index 6287b95309..7be82c650f 100644 --- a/docs/custom_quantum_functions.md +++ b/docs/custom_quantum_functions.md @@ -267,7 +267,7 @@ You should use this function if you need custom matrix scanning code. It can als If the board supports it, it can be "idled", by stopping a number of functions. A good example of this is RGB lights or backlights. This can save on power consumption, or may be better behavior for your keyboard. -This is controlled by two functions: `suspend_power_down_*` and `suspend_wakeup_init_*`, which are called when the system is board is idled and when it wakes up, respectively. +This is controlled by two functions: `suspend_power_down_*` and `suspend_wakeup_init_*`, which are called when the system board is idled and when it wakes up, respectively. ### Example suspend_power_down_user() and suspend_wakeup_init_user() Implementation diff --git a/docs/how_keyboards_work.md b/docs/how_keyboards_work.md index 0772f055d6..5697a21872 100644 --- a/docs/how_keyboards_work.md +++ b/docs/how_keyboards_work.md @@ -63,10 +63,10 @@ You may wonder why a keyboard layout containing all of Unicode is not devised th ## How to (Maybe) Enter Unicode Characters -You can have the firmware send *sequences of keys* to use the [software Unicode Input Method](https://en.wikipedia.org/wiki/Unicode_input#Hexadecimal_code_input) of the target operating system, thus effectively entering characters independently of the layout defined in the OS. +You can have the firmware send *sequences of keys* to use the [software Unicode Input Method](https://en.wikipedia.org/wiki/Unicode_input#Hexadecimal_input) of the target operating system, thus effectively entering characters independently of the layout defined in the OS. Yet, it does come with multiple disadvantages: - - Tied to a specific OS a a time (need recompilation when changing OS); + - Tied to a specific OS at a time (need recompilation when changing OS); - Within a given OS, does not work in all software; - Limited to a subset of Unicode on some systems. diff --git a/docs/zh-cn/_summary.md b/docs/zh-cn/_summary.md index df25a3ccd1..b0d9f1c068 100644 --- a/docs/zh-cn/_summary.md +++ b/docs/zh-cn/_summary.md @@ -7,27 +7,27 @@ * [学习资源](newbs_learn_more_resources.md) * [QMK基础](README.md) - * [QMK 简介](getting_started_introduction.md) - * [贡献 QMK](contributing.md) + * [QMK简介](getting_started_introduction.md) + * [向QMK贡献](contributing.md) * [如何使用Github](getting_started_github.md) * [获得帮助](getting_started_getting_help.md) * [问题解答](faq.md) * [一般问题](faq_general.md) - * [构建/编译QMK](faq_build.md) - * [调试/故障排除 QMK](faq_debug.md) - * [键盘布局](faq_keymap.md) + * [构建/编译](faq_build.md) + * [调试/故障排除](faq_debug.md) + * [键盘映射](faq_keymap.md) * 详细指南 * [安装构建工具](getting_started_build_tools.md) - * [流浪者指南](getting_started_vagrant.md) + * [vagrant指南](getting_started_vagrant.md) * [构建/编译指令](getting_started_make_guide.md) * [刷新固件](flashing.md) * [定制功能](custom_quantum_functions.md) - * [布局概述](keymap.md) + * [映射概述](keymap.md) * [硬件](hardware.md) - * [AVR 处理器](hardware_avr.md) + * [AVR处理器](hardware_avr.md) * [驱动](hardware_drivers.md) * 参考 @@ -35,8 +35,8 @@ * [配置选项](config_options.md) * [键码](keycodes.md) * [记录最佳实践](documentation_best_practices.md) - * [文档指南](documentation_templates.md) - * [词汇表](reference_glossary.md) + * [文档模板](documentation_templates.md) + * [术语表](reference_glossary.md) * [单元测试](unit_testing.md) * [有用的功能](ref_functions.md) * [配置器支持](reference_configurator_support.md) @@ -44,35 +44,35 @@ * [特性](features.md) * [基本键码](keycodes_basic.md) - * [US ANSI 控制键](keycodes_us_ansi_shifted.md) + * [US ANSI控制码](keycodes_us_ansi_shifted.md) * [量子键码](quantum_keycodes.md) * [高级键码](feature_advanced_keycodes.md) * [音频](feature_audio.md) - * [自动控制](feature_auto_shift.md) + * [自动shift](feature_auto_shift.md) * [背光](feature_backlight.md) * [蓝牙](feature_bluetooth.md) - * [Bootmagic](feature_bootmagic.md) + * [热改键](feature_bootmagic.md) * [组合](feature_combo) * [命令](feature_command.md) * [动态宏指令](feature_dynamic_macros.md) * [编码器](feature_encoders.md) - * [Grave Escape](feature_grave_esc.md) - * [键锁](feature_key_lock.md) - * [层](feature_layouts.md) - * [引导键](feature_leader_key.md) - * [LED 阵列](feature_led_matrix.md) + * [重音号Esc复合键](feature_grave_esc.md) + * [自锁键](feature_key_lock.md) + * [布局](feature_layouts.md) + * [前导键](feature_leader_key.md) + * [LED阵列](feature_led_matrix.md) * [宏指令](feature_macros.md) * [鼠标键](feature_mouse_keys.md) * [一键功能](feature_advanced_keycodes.md#one-shot-keys) * [指针设备](feature_pointing_device.md) - * [PS/2 鼠标](feature_ps2_mouse.md) - * [RGB 光](feature_rgblight.md) - * [RGB 矩阵](feature_rgb_matrix.md) + * [PS/2鼠标](feature_ps2_mouse.md) + * [RGB灯光](feature_rgblight.md) + * [RGB矩阵](feature_rgb_matrix.md) * [空格候补换挡](feature_space_cadet_shift.md) * [空格候补换挡回车](feature_space_cadet_shift_enter.md) * [速录机](feature_stenography.md) * [换手](feature_swap_hands.md) - * [踢踏舞](feature_tap_dance.md) + * [多击键](feature_tap_dance.md) * [终端](feature_terminal.md) * [热敏打印机](feature_thermal_printer.md) * [Unicode](feature_unicode.md) @@ -80,16 +80,16 @@ * [速度键](feature_velocikey.md) * 针对制造者和定制者 - * [飞线指南](hand_wire.md) - * [ISP 刷新指南](isp_flashing_guide.md) - * [ARM 调试指南](arm_debugging.md) - * [I2C 驱动](i2c_driver.md) - * [GPIO 控制器](internals_gpio_control.md) - * [Proton C 转换](proton_c_conversion.md) + * [手工连线指南](hand_wire.md) + * [ISP刷新指南](isp_flashing_guide.md) + * [ARM调试指南](arm_debugging.md) + * [I2C驱动](i2c_driver.md) + * [GPIO控制器](internals_gpio_control.md) + * [Proton C转换](proton_c_conversion.md) * 深入了解 * [键盘如何工作](how_keyboards_work.md) - * [理解 QMK](understanding_qmk.md) + * [理解QMK](understanding_qmk.md) * 其他话题 * [使用Eclipse开发QMK](other_eclipse.md) @@ -99,8 +99,8 @@ * QMK 内构 (正在编写) * [定义](internals_defines.md) * [输入回调寄存器](internals_input_callback_reg.md) - * [Midi 设备](internals_midi_device.md) - * [Midi 设备设置过程](internals_midi_device_setup_process.md) - * [Midi 工具库](internals_midi_util.md) + * [Midi设备](internals_midi_device.md) + * [Midi设备设置过程](internals_midi_device_setup_process.md) + * [Midi工具库](internals_midi_util.md) * [发送函数](internals_send_functions.md) - * [Sysex 工具](internals_sysex_tools.md) + * [Sysex工具](internals_sysex_tools.md) diff --git a/docs/zh-cn/custom_quantum_functions.md b/docs/zh-cn/custom_quantum_functions.md new file mode 100644 index 0000000000..42ceba9cac --- /dev/null +++ b/docs/zh-cn/custom_quantum_functions.md @@ -0,0 +1,490 @@ +# ζ̵Ĺ + +ںܶ˵ƻ̿ɲֻĵԷ㰴Ǹô򵥡϶ʵֱȼ򵥰ͺӵĹܡQMKעĹ, ǹ, ⣬ԶڲͬµΪ + +ҳٶκQMK֪ʶĶ[QMK](understanding_qmk.md)ڸIJⷢʲô + +## A Word on Core vs vs + +ǰqmk֯һνṹ + +* Core (`_quantum`) + * Keyboard/Revision (`_kb`) + * Keymap (`_user`) + +ÿһڶϼһ`_kb()` `_user()` ׺ ڼ/޶ʹ`_kb()`׺ڲֲʹ`_user()`׺ + +ڼ/޶㶨庯ʱ`_kb()`ִκδǰȵ`_user()`DZҪģȻֲ㺯ͲҪá + +# Զ + +ĿǰΪֹǸмΪ򴴽µļ롣ӴǶЩơ + +## һ¼ + +һöٳȫҲǸֲΨһֵQMKûֱֵСṩһ`SAFE_RANGE`ꡣöʱ`SAFE_RANGE`֤ȡΨһļֵ + + +öӡӵ`keymap.c`Ļڲ`FOO``BAR`ˡ + +```c +enum my_keycodes { + FOO = SAFE_RANGE, + BAR +}; +``` + +## ΪΪ + +㸲һѴڰΪʱΪ¼ʱҪ`process_record_kb()``process_record_user()`ڼʵ¼ǰQMKá`true`QMKķʽ롣ԺܷչĹܶ滻`false` QMKȻͼ̧ǰ¼ˡ + +ij»ͷʱᱻá + +### process_record_user()`ʾʵ + +¡Զһ`FOO`ļΪڰ»سʱ + +```c +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case FOO: + if (record->event.pressed) { + // ʱЩʲô + } else { + // ͷʱЩʲô + } + return false; // ˼нһ + case KC_ENTER: + // »سʱ + if (record->event.pressed) { + PLAY_NOTE_ARRAY(tone_qwerty); + } + return true; // QMKس/ͷ¼ + default: + return true; // + } +} +``` + +### `process_record_*` ĵ + +* /޶: `bool process_record_kb(uint16_t keycode, keyrecord_t *record)` +* : `bool process_record_user(uint16_t keycode, keyrecord_t *record)` + +`keycode()`ڲ϶ģ`MO(1)`, `KC_L`, ȵȡ Ҫ `switch...case` Щ¼ + +`record`ʵʰϢ + +```c +keyrecord_t record { + keyevent_t event { + keypos_t key { + uint8_t col + uint8_t row + } + bool pressed + uint16_t time + } +} +``` + +# LED + +qmkṩ˶ȡHID淶5LEDķ: + +* `USB_LED_NUM_LOCK` +* `USB_LED_CAPS_LOCK` +* `USB_LED_SCROLL_LOCK` +* `USB_LED_COMPOSE` +* `USB_LED_KANA` + +ӦLED״̬λλ +ַԻLED״̬ + +* ִͨ `led_set_user()` +* ͨ `host_keyboard_leds()` + +## `led_set_user()` + +5LEDκһ״̬Ҫıʱ˺á˺ͨLED +ʹ`IS_LED_ON(usb_led, led_name)``IS_LED_OFF(usb_led, led_name)`LED״̬ + +!> `host_keyboard_leds()`ܻ`led_set_user()`ǰֵ + +### `led_set_user()`ʾʵ + +```c +void led_set_user(uint8_t usb_led) { + if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) { + writePinLow(B0); + } else { + writePinHigh(B0); + } + if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { + writePinLow(B1); + } else { + writePinHigh(B1); + } + if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) { + writePinLow(B2); + } else { + writePinHigh(B2); + } + if (IS_LED_ON(usb_led, USB_LED_COMPOSE)) { + writePinLow(B3); + } else { + writePinHigh(B3); + } + if (IS_LED_ON(usb_led, USB_LED_KANA)) { + writePinLow(B4); + } else { + writePinHigh(B4); + } +} +``` + +### `led_set_*`ĵ + +* /޶: `void led_set_kb(uint8_t usb_led)` +* : `void led_set_user(uint8_t usb_led)` + +## `host_keyboard_leds()` + +᷵յLED״̬`led_set_*`֮ȡLED״̬ʱã[`matrix_scan_user()`](#ɨ). +Ϊ˱ݣ`IS_HOST_LED_ON(led_name)``IS_HOST_LED_OFF(led_name)` ֱ꣬ӵúͼ`host_keyboard_leds()` + +## LED״̬ + +һЩʵΪLED״̬ṩ˷ķ + +### Ergodox Boards + +Ergodoxʵṩ`ergodox_right_led_1`/`2`/`3_on`/`off()`ÿLED, Ҳ `ergodox_right_led_on`/`off(uint8_t led)` 򿪻رǡ + +⣬ʹ`ergodox_led_all_set(uint8_t n)`ָLEDȼÿLED`ergodox_right_led_1`/`2`/`3_set(uint8_t n)`ʹĻ`ergodox_right_led_set(uint8_t led, uint8_t n)` + +Ergodox boards ͬʱȼ`LED_BRIGHTNESS_LO`ȼ`LED_BRIGHTNESS_HI`(Ĭ). + +# ̳ʼ + +̳ʼм衣ǸȡҪʲô + +Ҫʼ˳г + +* `keyboard_pre_init_*` - ڴǰСЩҪǰеӲʼ +* `matrix_init_*` - ڹ̼м䱻áʱӲѳʼδʼ +* `keyboard_post_init_*` - ڹ̼󱻵á£ġƻ붼Է + +!> ڴ˵`keyboard_post_init_user`Ҫõĺ, ʱRGBƷ⡣ + +## Ԥʼ + +뼫УUSBʼǰС + +֮󲻾þͱʼˡ + +ڴû˵,òΪҪӲijʼ + +ӲʼĻٺò(ʼLEDһ). + +### `keyboard_pre_init_user()`ʾʵ + +ڼ̼趨 B0, B1, B2, B3, B4 LEDš + +```c +void keyboard_pre_init_user(void) { + // üԤʼ + + // LEDΪģʽ + setPinOutput(B0); + setPinOutput(B1); + setPinOutput(B2); + setPinOutput(B3); + setPinOutput(B4); +} +``` + +### `keyboard_pre_init_*` ĵ + +* /޶: `void keyboard_pre_init_kb(void)` +* : `void keyboard_pre_init_user(void)` + +## ʼ + +⽫ھʼʱãijЩӲúú󣬵һЩܱʼǰ + +طõĶʱãӲ޹أҲλá + + +### `matrix_init_*`ĵ + +* /޶: `void matrix_init_kb(void)` +* : `void matrix_init_user(void)` + + +## ̺ʼ + +Ǽ̳ʼеһijЩԣãΪʱӦöǽгʼ + + +### `keyboard_post_init_user()`ʾʵ + +ʾгʼɺУRGBơ + +```c +void keyboard_post_init_user(void) { + // úʼ + rgblight_enable_noeeprom(); // ʹRgb + rgblight_sethsv_noeeprom(180, 255, 255); // ɫõɫ(ɫ) + rgblight_mode_noeeprom(RGBLIGHT_MODE_BREATHING + 3); // ÿٺģʽ +} +``` + +### `keyboard_post_init_*` ĵ + +* /޶: `void keyboard_post_init_kb(void)` +* : `void keyboard_post_init_user(void)` + +# ɨ + +ܵĻҪ`process_record_*()`Զַ̣ʽӵ¼Уȷ벻Լ̲Ӱ졣Ȼڼ£бҪоɨ衣ЩҪرעܣΪÿٱ10Ρ + +### `matrix_scan_*`ʾʵ + +ӱʡˡhookһܼе֮ǰӦ㹻˽qmkڲṹԱûʾ±дҪ[һissue](https://github.com/qmk/qmk_firmware/issues/new)[Discordǽ](https://discord.gg/Uq7gcHh). + +### `matrix_scan_*` ĵ + +* /޶: `void matrix_scan_kb(void)` +* : `void matrix_scan_user(void)` + +úÿξɨʱãMCUͬдҪΪкܶΡ + +ԶɨʱõҲԶ״̬(LEDƻĻ)ûҲ붨еĹܡ + + +# / + +֧־ͿֹͨͣһƱﵽ""RGBƺͱǺܺõӡԽԼܺģҲ̷ζѡ + +: `suspend_power_down_*``suspend_wakeup_init_*`, ֱϵͳкͻʱá + + +### suspend_power_down_user()suspend_wakeup_init_user()ʾʵ + + +```c +void suspend_power_down_user(void) { + rgb_matrix_set_suspend_state(true); +} + +void suspend_wakeup_init_user(void) { + rgb_matrix_set_suspend_state(false); +} +``` + +### / ĵ + +* /޶: `void suspend_power_down_kb(void)` `void suspend_wakeup_init_user(void)` +* : `void suspend_power_down_kb(void)` `void suspend_wakeup_init_user(void)` + +# ı + +ÿıд롣ڲָʾԶ㴦á + +### `layer_state_set_*` ʾʵ + +ʹPlanckʾ [RGB](feature_rgblight.md)ʹ֮Ӧ + +```c +uint32_t layer_state_set_user(uint32_t state) { + switch (biton32(state)) { + case _RAISE: + rgblight_setrgb (0x00, 0x00, 0xFF); + break; + case _LOWER: + rgblight_setrgb (0xFF, 0x00, 0x00); + break; + case _PLOVER: + rgblight_setrgb (0x00, 0xFF, 0x00); + break; + case _ADJUST: + rgblight_setrgb (0x7A, 0x00, 0xFF); + break; + default: // for any other layers, or the default layer + rgblight_setrgb (0x00, 0xFF, 0xFF); + break; + } + return state; +} +``` +### `layer_state_set_*` ĵ + +* /޶: `uint32_t layer_state_set_kb(uint32_t state)` +* : `uint32_t layer_state_set_user(uint32_t state)` + + +`״̬`ǻbitmask, [ָ](keymap.md#ֵIJ״̬) + + +# 籣 (EEPROM) + +óڵıڼСЩñصEEPROM粻ʧ ÿ`eeconfig_read_kb``eeconfig_read_user`ȡ`eeconfig_update_kb``eeconfig_update_user`д롣ϣܹлĹܺ(лRGBָʾ⣬`eeconfig_init_kb``eeconfig_init_user`EEPROMĬֵ + +ӵIJֿǣкܶ෽ͨEEPROM洢ͷݣҲûַǡȷġÿֻһ˫(ֽ)ռ䡣 + +סEEPROMдġдܸߣDzֻдEEPROMСдƵMCU̡ + +* ӣôϣʹԣΪ൱ӡ + +### ʾʵ + +ãҶдʹû֡һӵĺкܶҪʵϣʹ˺ܶ + + +keymap.cļУ´: +```c +typedef union { + uint32_t raw; + struct { + bool rgb_layer_change :1; + }; +} user_config_t; + +user_config_t user_config; +``` + +ϴ뽨һṹ壬ýṹԴ洢òдEEPROM㽫趨ΪڽṹȻ塣Ҫס`bool` ()ֵʹ1λ, `uint8_t`ʹ8λ, `uint16_t`ʹ16λԻϴʹã˳Ǵܻ鷳Ϊǻıддֵ + + `layer_state_set_*`ʹ`rgb_layer_change`ʹ`keyboard_post_init_user``process_record_user`һС + +Ҫʹ`keyboard_post_init_userҪ`eeconfig_read_user()`ոմĽṹ塣ȻʹṹIJеĹܡ +```c +void keyboard_post_init_user(void) { + // òּľʼ + + // EEPROMû + user_config.raw = eeconfig_read_user(); + + // ʹܣĬϲ + if (user_config.rgb_layer_change) { + rgblight_enable_noeeprom(); + rgblight_sethsv_noeeprom_cyan(); + rgblight_mode_noeeprom(1); + } +} +``` +ϺڶEEPROMúʹøĬϲRGBɫ"raw"ֵǴ"union"Ľṹתġ + +```c +uint32_t layer_state_set_user(uint32_t state) { + switch (biton32(state)) { + case _RAISE: + if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom_magenta(); rgblight_mode_noeeprom(1); } + break; + case _LOWER: + if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom_red(); rgblight_mode_noeeprom(1); } + break; + case _PLOVER: + if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom_green(); rgblight_mode_noeeprom(1); } + break; + case _ADJUST: + if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom_white(); rgblight_mode_noeeprom(1); } + break; + default: // Ĭϲ + if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom_cyan(); rgblight_mode_noeeprom(1); } + break; + } + return state; +} +``` +ֵʹʱıRGBơֵ, Ϊ`process_record_user`һ¼`RGB_LYR`ҪȷʹRGB룬ʹʾرգ뽫Ϊ +```c + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case FOO: + if (record->event.pressed) { + // ʱʲô + } else { + // ͷʱʲô + } + return false; // ˼Ľһ + case KC_ENTER: + // ڰ»سʱ + if (record->event.pressed) { + PLAY_NOTE_ARRAY(tone_qwerty); + } + return true; // QMKس/ͷ¼ + case RGB_LYR: // underglowΪָʾʹá + if (record->event.pressed) { + user_config.rgb_layer_change ^= 1; // л״̬ + eeconfig_update_user(user_config.raw); // EEPROMд״̬ + if (user_config.rgb_layer_change) { // ״̬ʹ + layer_state_set(layer_state); // ô̸²ɫ + } + } + return false; break; + case RGB_MODE_FORWARD ... RGB_MODE_GRADIENT: // еRGB (see quantum_keycodes.h, L400 Բο) + if (record->event.pressed) { //ʧָܲʾıҪ + if (user_config.rgb_layer_change) { // ʹʱ + user_config.rgb_layer_change = false; // ʧܣȻ + eeconfig_update_user(user_config.raw); // EEPROMд + } + } + return true; break; + default: + return true; // + } +} +``` +Ҫ`eeconfig_init_user`ԵEEPROMʱָĬֵ, ԶǿEEPROM`EEP_RST`[Bootmagic](feature_bootmagic.md)磬ҪĬRGBָʾĬֵ + +```c +void eeconfig_init_user(void) { // EEPROM + user_config.raw = 0; + user_config.rgb_layer_change = true; // ҪĬʹ + eeconfig_update_user(user_config.raw); // EEPROMдĬֵ + + // use the non noeeprom versions, ҪEEPROMдЩֵ + rgblight_enable(); // ĬʹRGB + rgblight_sethsv_cyan(); // Ĭɫ + rgblight_mode(1); // Ĭó +} +``` + +ȻˡRGBָʾʱûһֱ棬¼̡ʹRGB룬ָʾʧܣˡ + +### 'EECONFIG' ĵ + +* /޶: `void eeconfig_init_kb(void)`, `uint32_t eeconfig_read_kb(void)``void eeconfig_update_kb(uint32_t val)` +* : `void eeconfig_init_user(void)`, `uint32_t eeconfig_read_user(void)``void eeconfig_update_user(uint32_t val)` + +`val` дEEPROMֵ`eeconfig_read_*`EEPROMһ32λ(˫)ֵ + +# Զ-ٽֵ(TAPPING_TERM) +Ĭ,-ٽֵȫͳһģҲͨáڴû˵ܺáЩ£`LT`˵ʱ˫ܼ󣬿ΪЩļװסΪ˲ÿԶ룬ܿΪÿ`TAPPING_TERM` + +ʹܵĻ, Ҫ`config.h``#define TAPPING_TERM_PER_KEY` + + +## `get_tapping_term`ʾʵ + +Ҫ޸Ļڼ`TAPPING TERM`,Ҫ`keymap.c`ļ´: + +```c +uint16_t get_tapping_term(uint16_t keycode) { + switch (keycode) { + case SFT_T(KC_SPC): + return TAPPING_TERM + 1250; + case LT(1, KC_GRV): + return 130; + default: + return TAPPING_TERM; + } +} +``` + +### `get_tapping_term` ĵ + +ƪ,Ҫquantum߼̼ĺֻҪûɡ diff --git a/docs/zh-cn/faq_general.md b/docs/zh-cn/faq_general.md new file mode 100644 index 0000000000..4949acb8c9 --- /dev/null +++ b/docs/zh-cn/faq_general.md @@ -0,0 +1,19 @@ +# + +## QMKʲô? + +[QMK](https://github.com/qmk), ӻе(Quantum Mechanical Keyboard)дһȺԴΪƼ̿ĹߡǴ[QMK̼](https://github.com/qmk/qmk_firmware)ʼ[TMK](https://github.com/tmk/tmk_keyboard)ħķֲ档 + +### Ϊʲô(Quantum)? + + + +## QMKTMKʲô? + +TMK[Jun Wako](https://github.com/tmk)ƺִСQMKʼ[Jack Humbert](https://github.com/jackhumbert)ΪPlanck̴TMKֲ档һʱJackķֲͺTMKȥԶˣ2015꣬JackQMK + +Ӽ۵QMKTMKһЩ¹ܶɵġQMKչ˿õļ룬ʹ߼ܽһḻ `S()`, `LCTL()`, `MO()`ȫ[](keycodes.md). + +ӹ̵TMKԼάйٷֵ֧ļֻ̣кСһ֧֡άѴڷֲΪ̴ķֲ档Ĭֺ֧ٵļ룬ûͨ˷֡QMKͨйֺֿͼ̣ǻз׼PRͼı֤άͬʱQMKСҲڱҪʱ + +ַŵȱ㣬ҴʱTMKQMK֮ diff --git a/docs/zh-cn/reference_glossary.md b/docs/zh-cn/reference_glossary.md new file mode 100644 index 0000000000..7b9adcc2a7 --- /dev/null +++ b/docs/zh-cn/reference_glossary.md @@ -0,0 +1,170 @@ +# QMK术语表 + +## ARM +多家公司生产的32位单片机系列，例如Atmel, Cypress, Kinetis, NXP, ST, 和 TI等公司。 + +## AVR +[Atmel](http://www.microchip.com/)公司的单片机系列。 AVR是TMK的初始支持平台。 + +## AZERTY +Français (法国)标准键盘布局。用键盘的前六个字母命名。 + +## Backlight(背光) +键盘上照明的通称。背光通常是一组LED灯，通过键帽或者按轴发光，但也不总是这样。 + +## Bluetooth(蓝牙) +一种短距离点对点无线协议。许多多无线键盘使用此协议。 + +## Bootloader(引导加载程序) +一种写到你单片机的保护区的特殊的程序，该程序可以使单片机升级自己的固件，通常是通过USB来升级。 + +## Bootmagic(热改键) +允许各种键盘行为动态变化的功能，如交换或禁用常用键。 + +## C +一种适用于系统代码的低级编程语言。大多数qmk代码是用C编写的。 + +## Colemak +一种流行的键盘布局。 + +## Compile(编译) +把人可读的代码转换成你的单片机可以运行的机器代码的过程。 + +## Dvorak +一个由August Dvorak博士在20世纪30年代创建的布局。Dvorak简化键盘(Dvorak Simplified Keyboard)的缩写。 + +## Dynamic Macro(动态宏) +一种记录在键盘上的宏，当键盘拔出或计算机重新启动时，宏将丢失。 + +* [动态宏文档](feature_dynamic_macros.md) + +## Eclipse +是一种受C语言开发者追捧的集成开发环境(IDE)。 + +* [Eclipse安装说明](eclipse.md) + +## Firmware(固件) +用来控制单片机的软件。 + +## FLIP +爱特梅尔(Atmel)提供的AVR器件刷写软件。我们一般推荐 [QMK刷写工具](https://github.com/qmk/qmk_flasher)，但是对于一些高级用例，需要FLIP。 + +## git +命令行版本控制软件 + +## GitHub +负责大多数QMK项目的网站。它是Git、问题跟踪和其他帮助我们运行qmk的功能的集成平台。 + +## ISP(在系统编程) +在系统编程(In-system programming), 使用外部硬件和JTAG管脚对AVR芯片进行编程的一种方法。 + +## hid_listen +从键盘接收调试消息的接口。 您可以使用[QMK Flasher](https://github.com/qmk/qmk_flasher)或[PJRC's hid_listen](https://www.pjrc.com/teensy/hid_listen.html)查看这些消息 + +## Keycode(键码) +表示特定键的2字节数据。`0x00`-`0xFF`用于[基本键码](keycodes_basic.md)而`0x100`-`0xFFFF`用于[量子键码](quantum_keycodes.md). + +## Key Down +一个键按下尚未抬起时触发的事件。 + +## Key Up +一个键抬起时触发的事件。 + +## Keymap(键映射) +映射到物理键盘布局的一组键码，在按键和按键释放时进行处理。有时翻译为布局，意为软件上表示的布局，即映射。 + +## Layer(层) +为了让一个键实现多个功能的抽象结构。最高活动层有限。 + +## Leader Key(前导键、设置菜单键) +本功能允许您点击前导键，然后按顺序按1-3个键子来激活按键或其他量子功能。 + +* [前导键文档](feature_leader_key.md) + +## LED +发光二极管，键盘上最常用的指示灯装置。 + +## Make +用于编译所有源文件的软件包。可以使用`make`命令和其他参数来编译你的固件。 + +## Matrix(矩阵) +一种由列和行组成的接线模式，使单片机能够用较少的引脚检测按键。矩阵通常包含二极管，以达到全键无冲。 + +## Macro(宏) +本功能可以在敲击单个键后发送多个按键事件(hid报告)。 + +* [宏文档](feature_macros.md) + +## MCU(单片机、微控制单元) +微控制单元，键盘的处理器。 + +## Modifier(修改键、修饰键、功能键) +按住该键将会改变其他键的功能，修饰键包括 Ctrl, Alt, 和 Shift。 + +## Mousekeys(鼠标键) +本功能在您敲击键盘时会控制鼠标光标。 + +* [鼠标键文档](feature_mouse_keys.md) + +## N-Key Rollover (NKRO、全键无冲) +一种术语，适用于能够同时报告任意数量按键的键盘。 + +## Oneshot Modifier(粘滞键) +一种能让你的功能键一直保持按下，直到你按下其他键的功能。它叫做粘滞键或叫做粘连键，该功能由软件实现而非机械结构。 + +## ProMicro +一种低成本AVR开发板。这种板子很容易在购物网站找到(价格不到20RMB)，但是据说刷写pro micro有点令人抓狂。 + +## Pull Request(拉请求、PR) +向QMK请求提交代码。我们鼓励所有用户提交你们自己的键盘的代码。 + +## QWERTY +标准英文键盘，通常也用于其他语言，例如中文。是用键盘前6个字母命名的。 + +## QWERTZ +标准Deutsche(德语)键盘布局。使用前6个字母明名。 + +## Rollover(允许翻转、无冲形式) +该术语表示在一个键已按下时按下另一个键。形式包括2KRO(双键无冲),6KRO(6键无冲),和NKRO(全键无冲)，无冲表示可同时按下而不产生冲突的键的数量。 + +## Scancode(扫描码) +HID报告中的一个1字节的数字，表示一个键子。这些数字在下列文档中[HID Usage Tables](https://www.usb.org/sites/default/files/documents/hut1_12v2.pdf)该文档发布于[USB-IF](http://www.usb.org/)。 + +## Space Cadet键盘的shift键 +一种特使的shift设置，能让你通过敲击左或右shift一次或多次键入不同的括号。 + +* [Space Cadet键盘文档](feature_space_cadet.md) + +## Tap(敲击、单击) +按下并释放一个键。在某些情况下您需要区分键按下和键抬起，但是单击把两个事件都包括了。 + +## Tap Dance(多击键) +本功能允许向同一个键子分配多个键码，并根据按键次数区分。 + +* [多击键文档](feature_tap_dance.md) + +## Teensy +一种低成本AVR开发板，通常用于手工连线键盘。这个teensy是有点小贵但是halfkay bootloader会让它刷写十分简单，所以也很常用。 + +## Underlight(背光) +用于照亮电路板底面的LED的总称。这些LED通常从印刷电路板的底部向键盘所在的表面发光。 + +## Unicode +在较大的计算机世界中，Unicode是一组编码方案，用于表示任何语言中的字符。 与qmk相关的是，它意味着使用各种操作系统方案来发送Unicode代码点，而不是扫描码。 + +* [Unicode文档](feature_unicode.md) + +## Unit Testing(单元测试) +针对qmk的自动运行测试框架。单元测试帮助我们确信我们的更改不会破坏任何东西。 + +* [单元测试文档](unit_testing.md) + +## USB +通用串行总线，键盘最常见的有线接口。 + +## USB 主机 (或简易主机) +USB诸暨市你的电脑，或者你的键盘所插的任何设备。 + +# 并没有找到你想找到的术语? + +[建立一个issue](https://github.com/qmk/qmk_firmware/issues) ，想好你的问题，或许你所问的术语就会添加到这里。创建一个PR帮我们添加需要添加的术语当然坠吼了:) -- cgit 1.4.1 From b2f7915994eb514a0348fdb864ead04c54c509c7 Mon Sep 17 00:00:00 2001 From: Alex Mayer Date: Wed, 5 Jun 2019 14:18:20 -0400 Subject: [Docs] Make Code Examples Consistent On Combo Page (#6078) --- docs/feature_combo.md | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'docs') diff --git a/docs/feature_combo.md b/docs/feature_combo.md index 680adce2dc..4cb1bcda08 100644 --- a/docs/feature_combo.md +++ b/docs/feature_combo.md @@ -29,6 +29,7 @@ enum combos { AB_ESC, JK_TAB }; + const uint16_t PROGMEM ab_combo[] = {KC_A, KC_B, COMBO_END}; const uint16_t PROGMEM jk_combo[] = {KC_J, KC_K, COMBO_END}; @@ -44,7 +45,7 @@ For a more complicated implementation, you can use the `process_combo_event` fun enum combo_events { ZC_COPY, XV_PASTE - }; +}; const uint16_t PROGMEM copy_combo[] = {KC_Z, KC_C, COMBO_END}; const uint16_t PROGMEM paste_combo[] = {KC_X, KC_V, COMBO_END}; -- cgit 1.4.1 From 4f2f2271cda85c3939deb3f61bbd9430e38a20fc Mon Sep 17 00:00:00 2001 From: Danny Nguyen Date: Wed, 5 Jun 2019 13:53:11 -0400 Subject: Change from avr-gcc@7 to @8 for Mac --- docs/faq_build.md | 4 ++-- docs/getting_started_build_tools.md | 6 +++--- docs/zh-cn/faq_build.md | 4 ++-- util/macos_install.sh | 4 ++-- 4 files changed, 9 insertions(+), 9 deletions(-) (limited to 'docs') diff --git a/docs/faq_build.md b/docs/faq_build.md index 0c1bedd715..23d6a67021 100644 --- a/docs/faq_build.md +++ b/docs/faq_build.md @@ -140,8 +140,8 @@ For now, you need to rollback avr-gcc to 7 in brew. ``` brew uninstall --force avr-gcc -brew install avr-gcc@7 -brew link --force avr-gcc@7 +brew install avr-gcc@8 +brew link --force avr-gcc@8 ``` ### I just flashed my keyboard and it does nothing/keypresses don't register - it's also ARM (rev6 planck, clueboard 60, hs60v2, etc...) (Feb 2019) diff --git a/docs/getting_started_build_tools.md b/docs/getting_started_build_tools.md index 0e1acca66a..268cc94c38 100644 --- a/docs/getting_started_build_tools.md +++ b/docs/getting_started_build_tools.md @@ -62,14 +62,14 @@ If you're using [homebrew,](http://brew.sh/) you can use the following commands: brew tap osx-cross/avr brew tap PX4/homebrew-px4 brew update - brew install avr-gcc@7 - brew link --force avr-gcc@7 + brew install avr-gcc@8 + brew link --force avr-gcc@8 brew install dfu-programmer brew install dfu-util brew install gcc-arm-none-eabi brew install avrdude -This is the recommended method. If you don't have homebrew, [install it!](http://brew.sh/) It's very much worth it for anyone who works in the command line. Note that the `make` and `make install` portion during the homebrew installation of `avr-gcc@7` can take over 20 minutes and exhibit high CPU usage. +This is the recommended method. If you don't have homebrew, [install it!](http://brew.sh/) It's very much worth it for anyone who works in the command line. Note that the `make` and `make install` portion during the homebrew installation of `avr-gcc@8` can take over 20 minutes and exhibit high CPU usage. ## Windows with msys2 (recommended) diff --git a/docs/zh-cn/faq_build.md b/docs/zh-cn/faq_build.md index 60d902007c..8fb449db30 100644 --- a/docs/zh-cn/faq_build.md +++ b/docs/zh-cn/faq_build.md @@ -137,8 +137,8 @@ brew install avrdude ``` brew uninstall --force avr-gcc -brew install avr-gcc@7 -brew link --force avr-gcc@7 +brew install avr-gcc@8 +brew link --force avr-gcc@8 ``` ### 我刷新了我的键盘但是键盘不工作/按键没有注册 - 而且还是ARM的 (rev6 planck, clueboard 60, hs60v2, etc...) (Feb 2019) diff --git a/util/macos_install.sh b/util/macos_install.sh index 93f3ed0b96..915ff3143c 100755 --- a/util/macos_install.sh +++ b/util/macos_install.sh @@ -22,5 +22,5 @@ fi brew tap osx-cross/avr brew tap PX4/homebrew-px4 brew update -brew install avr-gcc@7 gcc-arm-none-eabi dfu-programmer avrdude dfu-util python3 -brew link --force avr-gcc@7 +brew install avr-gcc@8 gcc-arm-none-eabi dfu-programmer avrdude dfu-util python3 +brew link --force avr-gcc@8 -- cgit 1.4.1 From 91b0c75045c38a9c770f7835b928b3b298a1ff8f Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Thu, 6 Jun 2019 01:01:24 -0400 Subject: Add meta tags for docs --- docs/index.html | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'docs') diff --git a/docs/index.html b/docs/index.html index d6fdbdbcc1..995d6b8f87 100644 --- a/docs/index.html +++ b/docs/index.html @@ -5,7 +5,11 @@ QMK Firmware - + + + + + -- cgit 1.4.1 From 834a8d1da18688eefe3e9e01f75f3e936f156e10 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Thu, 6 Jun 2019 01:07:54 -0400 Subject: add type:object to docs meta info (github uses it) --- docs/index.html | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'docs') diff --git a/docs/index.html b/docs/index.html index 995d6b8f87..77a8085bfc 100644 --- a/docs/index.html +++ b/docs/index.html @@ -7,7 +7,8 @@ - + + -- cgit 1.4.1 From fe6b8edd581c334a92a97c15faced95a12d5e882 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Thu, 6 Jun 2019 01:23:18 -0400 Subject: use twitter card large setting for larger previews --- docs/index.html | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'docs') diff --git a/docs/index.html b/docs/index.html index 77a8085bfc..8190450728 100644 --- a/docs/index.html +++ b/docs/index.html @@ -7,10 +7,11 @@ - + + -- cgit 1.4.1 From faaaa134fd436be400aa2c7841b38907899d49a6 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Thu, 6 Jun 2019 12:09:56 -0700 Subject: Replace DEBOUNCING_DELAY (deprecated) with DEBOUNCE (#5997) --- docs/config_options.md | 2 +- docs/feature_bootmagic.md | 2 +- keyboards/1upkeyboards/1up60hse/config.h | 2 +- keyboards/1upkeyboards/1up60hte/config.h | 4 ++-- keyboards/1upkeyboards/1up60rgb/config.h | 2 +- keyboards/1upkeyboards/super16/config.h | 2 +- keyboards/1upkeyboards/sweet16/config.h | 3 +-- keyboards/40percentclub/25/config.h | 2 +- keyboards/40percentclub/4x4/config.h | 2 +- keyboards/40percentclub/5x5/config.h | 2 +- keyboards/40percentclub/6lit/config.h | 2 +- keyboards/40percentclub/foobar/config.h | 2 +- keyboards/40percentclub/gherkin/config.h | 2 +- keyboards/40percentclub/half_n_half/config.h | 2 +- keyboards/40percentclub/i75/config.h | 2 +- keyboards/40percentclub/luddite/config.h | 2 +- keyboards/40percentclub/mf68/config.h | 2 +- keyboards/40percentclub/nein/config.h | 2 +- keyboards/40percentclub/nori/config.h | 2 +- keyboards/40percentclub/tomato/config.h | 2 +- keyboards/40percentclub/ut47/config.h | 2 +- keyboards/abstract/ellipse/rev1/config.h | 2 +- keyboards/acr60/config.h | 2 +- keyboards/adkb96/rev1/config.h | 5 ++--- keyboards/aeboards/aegis/config.h | 3 +-- keyboards/ai03/lunar/config.h | 4 ++-- keyboards/ai03/orbit/config.h | 2 +- keyboards/al1/config.h | 2 +- keyboards/al1/matrix.c | 8 ++++---- keyboards/alf/dc60/config.h | 2 +- keyboards/alf/x11/config.h | 2 +- keyboards/alf/x2/config.h | 2 +- keyboards/alpha/config.h | 2 +- keyboards/alu84/config.h | 2 +- keyboards/amj40/config.h | 2 +- keyboards/amj60/config.h | 2 +- keyboards/amj96/config.h | 2 +- keyboards/amjpad/config.h | 2 +- keyboards/ares/config.h | 4 ++-- keyboards/at101_blackheart/config.h | 2 +- keyboards/atom47/rev2/config.h | 2 +- keyboards/atom47/rev3/config.h | 2 +- keyboards/atomic/config.h | 2 +- keyboards/atomic/keymaps/pvc/config.h | 2 +- keyboards/atreus/config.h | 2 +- keyboards/atreus/keymaps/alphadox/config.h | 2 +- keyboards/atreus/keymaps/dvorak_42_key/config.h | 2 +- keyboards/atreus/keymaps/erlandsona/config.h | 2 +- keyboards/atreus62/config.h | 2 +- keyboards/baguette/baguette.c | 2 +- keyboards/baguette/config.h | 2 +- keyboards/bantam44/config.h | 2 +- keyboards/bfake/config.h | 2 +- keyboards/bigseries/1key/config.h | 2 +- keyboards/bigseries/2key/config.h | 2 +- keyboards/bigseries/3key/config.h | 2 +- keyboards/bigseries/4key/config.h | 2 +- keyboards/bigswitch/config.h | 2 +- keyboards/bigswitch/keymaps/wanleg/config.h | 4 ++-- keyboards/blockey/config.h | 2 +- keyboards/bm16a/config.h | 2 +- keyboards/bm16s/config.h | 2 +- keyboards/boardwalk/config.h | 2 +- keyboards/bpiphany/frosty_flake/config.h | 2 +- keyboards/bpiphany/frosty_flake/matrix.c | 8 ++++---- keyboards/bpiphany/kitten_paw/config.h | 2 +- keyboards/bpiphany/kitten_paw/matrix.c | 8 ++++---- keyboards/bpiphany/pegasushoof/config.h | 2 +- keyboards/bpiphany/pegasushoof/matrix.c | 4 ++-- keyboards/bpiphany/sixshooter/config.h | 2 +- keyboards/bpiphany/tiger_lily/config.h | 2 +- keyboards/bpiphany/tiger_lily/matrix.c | 8 ++++---- keyboards/bpiphany/unloved_bastard/config.h | 2 +- keyboards/bpiphany/unloved_bastard/matrix.c | 8 ++++---- keyboards/bthlabs/geekpad/config.h | 2 +- keyboards/butterstick/config.h | 3 +-- keyboards/canoe/config.h | 2 +- keyboards/catch22/config.h | 2 +- keyboards/christmas_tree/config.h | 2 +- keyboards/ckeys/handwire_101/config.h | 2 +- keyboards/ckeys/nakey/config.h | 2 +- keyboards/ckeys/obelus/config.h | 2 +- keyboards/claw44/rev1/config.h | 2 +- keyboards/clueboard/17/config.h | 2 +- keyboards/clueboard/2x1800/config.h | 2 +- keyboards/clueboard/66/rev1/config.h | 2 +- keyboards/clueboard/66/rev2/config.h | 2 +- keyboards/clueboard/66/rev3/config.h | 2 +- keyboards/clueboard/66/rev4/config.h | 2 +- keyboards/clueboard/66_hotswap/config.h | 2 +- keyboards/clueboard/card/config.h | 2 +- keyboards/contra/config.h | 2 +- keyboards/converter/hp_46010a/config.h | 4 +--- keyboards/converter/hp_46010a/matrix.c | 14 +++++++------- keyboards/converter/ibm_5291/config.h | 4 +--- keyboards/converter/ibm_5291/matrix.c | 16 ++++++++-------- keyboards/converter/modelm101/config.h | 4 ++-- keyboards/converter/numeric_keypad_IIe/config.h | 6 +++--- keyboards/coseyfannitutti/mullet/config.h | 3 +-- keyboards/coseyfannitutti/mulletpad/config.h | 3 +-- keyboards/cospad/config.h | 2 +- keyboards/crawlpad/config.h | 3 +-- keyboards/crkbd/rev1/config.h | 2 +- keyboards/cu24/config.h | 4 ++-- keyboards/cu75/config.h | 2 +- keyboards/daisy/config.h | 4 ++-- keyboards/dc01/arrow/config.h | 2 +- keyboards/dc01/arrow/matrix.c | 16 ++++++++-------- keyboards/dc01/left/config.h | 2 +- keyboards/dc01/left/matrix.c | 16 ++++++++-------- keyboards/dc01/numpad/config.h | 2 +- keyboards/dc01/numpad/matrix.c | 16 ++++++++-------- keyboards/dc01/right/config.h | 2 +- keyboards/dc01/right/matrix.c | 16 ++++++++-------- keyboards/deltasplit75/matrix.c | 14 +++++++------- keyboards/deltasplit75/v2/config.h | 2 +- keyboards/diverge3/config.h | 2 +- keyboards/divergetm2/config.h | 2 +- keyboards/dk60/config.h | 2 +- keyboards/do60/config.h | 2 +- keyboards/donutcables/budget96/config.h | 2 +- keyboards/donutcables/scrabblepad/config.h | 2 +- keyboards/doro67/rgb/config.h | 4 ++-- keyboards/dozen0/config.h | 2 +- keyboards/duck/eagle_viper/v2/config.h | 3 +-- keyboards/duck/eagle_viper/v2/matrix.c | 4 ++-- keyboards/duck/jetfire/config.h | 2 +- keyboards/duck/jetfire/matrix.c | 4 ++-- keyboards/duck/lightsaver/config.h | 3 +-- keyboards/duck/lightsaver/matrix.c | 4 ++-- keyboards/duck/octagon/v1/config.h | 2 +- keyboards/duck/octagon/v1/matrix.c | 4 ++-- keyboards/duck/octagon/v2/config.h | 3 +-- keyboards/duck/octagon/v2/matrix.c | 4 ++-- keyboards/dz60/config.h | 2 +- keyboards/dz60/keymaps/LEdiodes/config.h | 2 +- keyboards/eco/config.h | 2 +- keyboards/ep/40/config.h | 2 +- keyboards/ep/96/config.h | 2 +- keyboards/ergo42/matrix.c | 14 +++++++------- keyboards/ergo42/rev1/config.h | 2 +- keyboards/ergodash/mini/config.h | 2 +- keyboards/ergodash/rev1/config.h | 2 +- keyboards/ergoinu/config.h | 2 +- keyboards/ergotravel/rev1/config.h | 2 +- keyboards/espectro/config.h | 2 +- keyboards/evil80/config.h | 2 +- keyboards/exclusive/e6v2/le/config.h | 2 +- keyboards/exclusive/e6v2/oe/config.h | 2 +- keyboards/exclusive/e7v1/config.h | 2 +- keyboards/facew/config.h | 2 +- keyboards/fc660c/config.h | 2 +- keyboards/fc980c/config.h | 2 +- keyboards/felix/config.h | 2 +- keyboards/fleuron/config.h | 2 +- keyboards/fortitude60/matrix.c | 14 +++++++------- keyboards/fortitude60/rev1/config.h | 2 +- keyboards/four_banger/config.h | 2 +- keyboards/foxlab/leaf60/hotswap/config.h | 2 +- keyboards/foxlab/leaf60/universal/config.h | 2 +- keyboards/fractal/config.h | 2 +- keyboards/ft/mars80/config.h | 3 +-- keyboards/gh60/config.h | 2 +- keyboards/gh60/keymaps/dbroqua/config.h | 2 +- keyboards/gh60/keymaps/robotmaxtron/config.h | 2 +- keyboards/gh80_3000/config.h | 2 +- keyboards/gonnerd/config.h | 2 +- keyboards/gray_studio/cod67/config.h | 2 +- keyboards/gray_studio/space65/config.h | 2 +- keyboards/gskt00/config.h | 2 +- keyboards/hadron/config.h | 2 +- keyboards/halberd/config.h | 4 +--- keyboards/handwired/108key_trackpoint/config.h | 2 +- keyboards/handwired/412_64/config.h | 2 +- keyboards/handwired/arrow_pad/config.h | 2 +- keyboards/handwired/arrow_pad/keymaps/pad_21/config.h | 2 +- keyboards/handwired/arrow_pad/keymaps/pad_24/config.h | 2 +- keyboards/handwired/atreus50/config.h | 2 +- keyboards/handwired/cmd60/config.h | 2 +- keyboards/handwired/dactyl/matrix.c | 16 ++++++++-------- keyboards/handwired/dactyl_manuform/config.h | 2 +- keyboards/handwired/dactyl_promicro/config.h | 2 +- keyboards/handwired/daishi/config.h | 2 +- keyboards/handwired/datahand/config.h | 2 +- keyboards/handwired/downbubble/config.h | 2 +- keyboards/handwired/fivethirteen/config.h | 2 +- keyboards/handwired/gamenum/config.h | 2 +- keyboards/handwired/hacked_motospeed/config.h | 2 +- keyboards/handwired/hexon38/config.h | 2 +- keyboards/handwired/ibm122m/config.h | 2 +- keyboards/handwired/jn68m/config.h | 2 +- keyboards/handwired/jot50/config.h | 2 +- keyboards/handwired/jotanck/config.h | 2 +- keyboards/handwired/jotpad16/config.h | 3 +-- keyboards/handwired/kbod/config.h | 2 +- keyboards/handwired/maartenwut/config.h | 2 +- keyboards/handwired/magicforce61/config.h | 2 +- keyboards/handwired/magicforce68/config.h | 2 +- keyboards/handwired/mechboards_micropad/config.h | 2 +- keyboards/handwired/minorca/config.h | 2 +- keyboards/handwired/ms_sculpt_mobile/config.h | 2 +- keyboards/handwired/not_so_minidox/config.h | 2 +- keyboards/handwired/numbrero/config.h | 2 +- keyboards/handwired/numpad20/config.h | 2 +- keyboards/handwired/ortho5x13/config.h | 2 +- keyboards/handwired/pilcrow/config.h | 2 +- keyboards/handwired/prime_exl/config.h | 2 +- keyboards/handwired/promethium/config.h | 2 +- keyboards/handwired/promethium/matrix.c | 15 +++++++-------- keyboards/handwired/pteron/config.h | 2 +- keyboards/handwired/qc60/config.h | 2 +- keyboards/handwired/reddot/config.h | 2 +- keyboards/handwired/retro_refit/config.h | 2 +- keyboards/handwired/space_oddity/config.h | 2 +- keyboards/handwired/splittest/config.h | 2 +- keyboards/handwired/tennie/config.h | 2 +- keyboards/handwired/terminus_mini/config.h | 2 +- keyboards/handwired/trackpoint/config.h | 2 +- keyboards/handwired/tradestation/config.h | 2 +- keyboards/handwired/traveller/config.h | 2 +- keyboards/handwired/woodpad/config.h | 2 +- keyboards/handwired/xealous/rev1/config.h | 2 +- keyboards/hecomi/alpha/config.h | 2 +- keyboards/helix/pico/config.h | 2 +- keyboards/helix/rev1/config.h | 2 +- keyboards/helix/rev2/config.h | 2 +- keyboards/hid_liber/config.h | 2 +- keyboards/hifumi/config.h | 2 +- keyboards/hineybush/h87a/config.h | 2 +- keyboards/hineybush/hineyg80/config.h | 3 +-- keyboards/hs60/v1/config.h | 2 +- keyboards/hs60/v1/v1.c | 2 +- keyboards/hs60/v2/config.h | 2 +- keyboards/idobo/config.h | 2 +- keyboards/jc65/v32u4/config.h | 2 +- keyboards/jd40/config.h | 2 +- keyboards/jd45/config.h | 2 +- keyboards/jd45/keymaps/mjt/config.h | 2 +- keyboards/jj40/config.h | 2 +- keyboards/jj4x4/config.h | 2 +- keyboards/kagamidget/config.h | 2 +- keyboards/katana60/config.h | 2 +- keyboards/kbdfans/kbd19x/config.h | 2 +- keyboards/kbdfans/kbd4x/config.h | 2 +- keyboards/kbdfans/kbd66/config.h | 3 +-- keyboards/kbdfans/kbd67/hotswap/config.h | 2 +- keyboards/kbdfans/kbd67/rev1/config.h | 2 +- keyboards/kbdfans/kbd67/rev2/config.h | 2 +- keyboards/kbdfans/kbd6x/config.h | 2 +- keyboards/kbdfans/kbd75/config.h | 2 +- keyboards/kbdfans/kbd8x/config.h | 2 +- keyboards/kc60/config.h | 2 +- keyboards/kc60se/config.h | 2 +- keyboards/keebio/bdn9/config.h | 2 +- keyboards/keebio/bfo9000/config.h | 2 +- keyboards/keebio/chocopad/config.h | 2 +- keyboards/keebio/dilly/config.h | 2 +- keyboards/keebio/fourier/config.h | 2 +- keyboards/keebio/levinson/rev1/config.h | 2 +- keyboards/keebio/levinson/rev2/config.h | 2 +- keyboards/keebio/nyquist/rev1/config.h | 2 +- keyboards/keebio/nyquist/rev2/config.h | 2 +- keyboards/keebio/nyquist/rev3/config.h | 2 +- keyboards/keebio/quefrency/rev1/config.h | 2 +- keyboards/keebio/rorschach/rev1/config.h | 2 +- keyboards/keebio/tragicforce68/config.h | 2 +- keyboards/keebio/viterbi/rev1/config.h | 2 +- keyboards/keebio/viterbi/rev2/config.h | 2 +- keyboards/keebio/wavelet/config.h | 2 +- keyboards/keycapsss/o4l_5x12/config.h | 2 +- keyboards/kinesis/config.h | 2 +- keyboards/kinesis/stapelberg/config.h | 2 +- keyboards/kira75/config.h | 2 +- keyboards/kmac/config.h | 2 +- keyboards/kmac/matrix.c | 6 +++--- keyboards/kmini/config.h | 2 +- keyboards/kmini/matrix.c | 6 +++--- keyboards/knops/mini/config.h | 2 +- keyboards/kona_classic/config.h | 2 +- keyboards/laptreus/config.h | 2 +- keyboards/launchpad/config.h | 2 +- keyboards/lazydesigners/dimple/config.h | 2 +- keyboards/lazydesigners/the50/config.h | 2 +- keyboards/lazydesigners/the60/config.h | 2 +- keyboards/lets_split/rev1/config.h | 2 +- keyboards/lets_split/rev2/config.h | 2 +- keyboards/lets_split/sockets/config.h | 2 +- keyboards/lets_split_eh/config.h | 2 +- keyboards/lfkeyboards/lfk65_hs/config.h | 2 +- keyboards/lfkeyboards/lfk78/config.h | 2 +- keyboards/lfkeyboards/lfk87/config.h | 2 +- keyboards/lfkeyboards/lfkpad/config.h | 2 +- keyboards/lfkeyboards/mini1800/config.h | 2 +- keyboards/lfkeyboards/smk65/config.h | 2 +- keyboards/lily58/matrix.c | 14 +++++++------- keyboards/lily58/rev1/config.h | 2 +- keyboards/m0lly/config.h | 2 +- keyboards/m10a/config.h | 2 +- keyboards/massdrop/alt/config.h | 2 +- keyboards/massdrop/alt/matrix.c | 2 +- keyboards/massdrop/ctrl/config.h | 2 +- keyboards/massdrop/ctrl/matrix.c | 2 +- keyboards/maxipad/config.h | 2 +- keyboards/mechkeys/mk60/config.h | 2 +- keyboards/mechmini/v2/config.h | 2 +- keyboards/meira/featherble/config.h | 2 +- keyboards/meira/matrix.c | 14 ++++++-------- keyboards/meira/promicro/config.h | 2 +- keyboards/meishi/config.h | 3 +-- keyboards/melody96/config.h | 2 +- keyboards/meme/config.h | 2 +- keyboards/miniaxe/config.h | 2 +- keyboards/minidox/config.h | 2 +- keyboards/mint60/config.h | 2 +- keyboards/miuni32/config.h | 2 +- keyboards/model01/config.h | 2 +- keyboards/mt40/config.h | 2 +- keyboards/mt980/config.h | 2 +- keyboards/mxss/config.h | 2 +- keyboards/namecard2x4/rev1/config.h | 2 +- keyboards/namecard2x4/rev2/config.h | 2 +- keyboards/nek_type_a/config.h | 4 +--- keyboards/nek_type_a/matrix.c | 16 ++++++++-------- keyboards/niu_mini/config.h | 2 +- keyboards/nk65/config.h | 2 +- keyboards/novelpad/config.h | 2 +- keyboards/noxary/220/config.h | 2 +- keyboards/noxary/260/config.h | 2 +- keyboards/noxary/268/config.h | 2 +- keyboards/noxary/268_2/config.h | 2 +- keyboards/noxary/280/config.h | 2 +- keyboards/noxary/x268/config.h | 2 +- keyboards/ok60/config.h | 2 +- keyboards/omnikey_blackheart/config.h | 2 +- keyboards/orange75/config.h | 2 +- keyboards/org60/config.h | 2 +- keyboards/orthodox/rev1/config.h | 2 +- keyboards/orthodox/rev3/config.h | 2 +- keyboards/orthodox/rev3_teensy/config.h | 2 +- keyboards/paladin64/config.h | 2 +- keyboards/panc60/config.h | 2 +- keyboards/pearl/config.h | 2 +- keyboards/phantom/config.h | 2 +- keyboards/pinky/3/config.h | 2 +- keyboards/pinky/4/config.h | 2 +- keyboards/plaid/config.h | 2 +- keyboards/plain60/config.h | 2 +- keyboards/planck/config.h | 2 +- keyboards/planck/keymaps/dodger/config.h | 2 +- keyboards/playkbtw/ca66/ca66.c | 2 +- keyboards/playkbtw/ca66/config.h | 2 +- keyboards/playkbtw/pk60/config.h | 2 +- keyboards/preonic/config.h | 2 +- keyboards/preonic/keymaps/kinesis/config.h | 2 +- keyboards/preonic/keymaps/zach/config.h | 2 +- keyboards/primekb/prime_e/config.h | 2 +- keyboards/primekb/prime_l/config.h | 2 +- keyboards/primekb/prime_m/config.h | 2 +- keyboards/primekb/prime_o/config.h | 2 +- keyboards/primekb/prime_r/config.h | 2 +- keyboards/puck/config.h | 2 +- keyboards/quantrik/kyuu/config.h | 2 +- keyboards/qwertyydox/config.h | 2 +- keyboards/qwertyydox/rev1/config.h | 2 +- keyboards/rama/koyu/config.h | 2 +- keyboards/rama/m10_b/config.h | 2 +- keyboards/rama/m60_a/config.h | 2 +- keyboards/rama/m6_a/config.h | 2 +- keyboards/rama/m6_b/config.h | 2 +- keyboards/rama/u80_a/config.h | 2 +- keyboards/redox/rev1/config.h | 2 +- keyboards/rgbkb/sol/config.h | 2 +- keyboards/rgbkb/zen/rev1/config.h | 2 +- keyboards/rgbkb/zen/rev2/config.h | 2 +- keyboards/rgbkb/zygomorph/rev1/config.h | 2 +- keyboards/romac/config.h | 2 +- keyboards/s7_elephant/config.h | 2 +- keyboards/satan/config.h | 2 +- keyboards/satan/keymaps/admiralStrokers/config.h | 2 +- keyboards/satan/keymaps/fakb/config.h | 2 +- keyboards/scarletbandana/config.h | 2 +- keyboards/scythe/config.h | 3 +-- keyboards/sentraq/number_pad/config.h | 2 +- keyboards/sentraq/s60_x/default/config.h | 3 +-- keyboards/sentraq/s60_x/keymaps/bluebear/config.h | 2 +- keyboards/sentraq/s60_x/rgb/config.h | 3 +-- keyboards/sentraq/s65_plus/config.h | 2 +- keyboards/sentraq/s65_x/config.h | 2 +- keyboards/signum/3_0/elitec/config.h | 2 +- keyboards/singa/config.h | 2 +- keyboards/sixkeyboard/config.h | 2 +- keyboards/snagpad/config.h | 2 +- keyboards/southpole/config.h | 2 +- keyboards/speedo/config.h | 2 +- keyboards/standaside/config.h | 3 +-- keyboards/staryu/config.h | 2 +- keyboards/subatomic/config.h | 2 +- keyboards/sx60/config.h | 2 +- keyboards/sx60/matrix.c | 14 +++++++------- keyboards/tada68/config.h | 2 +- keyboards/tetris/config.h | 3 +-- keyboards/the_ruler/config.h | 2 +- keyboards/thevankeyboards/bananasplit/config.h | 2 +- keyboards/thevankeyboards/minivan/config.h | 2 +- keyboards/thevankeyboards/minivan/keymaps/budi/config.h | 6 +++--- keyboards/thevankeyboards/roadkit/config.h | 2 +- keyboards/tkc1800/config.h | 2 +- keyboards/tmo50/config.h | 2 +- keyboards/toad/config.h | 2 +- keyboards/tokyo60/config.h | 2 +- keyboards/touchpad/config.h | 2 +- keyboards/treadstone32/config.h | 2 +- keyboards/treadstone48/rev1/config.h | 2 +- keyboards/treasure/type9/config.h | 2 +- keyboards/uk78/config.h | 2 +- keyboards/ut472/config.h | 2 +- keyboards/v60_type_r/config.h | 2 +- keyboards/vision_division/config.h | 2 +- keyboards/vitamins_included/matrix.c | 14 +++++++------- keyboards/vitamins_included/rev1/config.h | 2 +- keyboards/waldo/config.h | 2 +- keyboards/wasdat/config.h | 2 +- keyboards/westfoxtrot/aanzee/config.h | 2 +- keyboards/westfoxtrot/cyclops/config.h | 4 ++-- keyboards/westfoxtrot/cypher/config.h | 2 +- keyboards/wilba_tech/wt60_a/config.h | 2 +- keyboards/wilba_tech/wt65_a/config.h | 2 +- keyboards/wilba_tech/wt69_a/config.h | 2 +- keyboards/wilba_tech/wt75_a/config.h | 2 +- keyboards/wilba_tech/wt80_a/config.h | 2 +- keyboards/wilba_tech/wt8_a/config.h | 2 +- keyboards/xd60/rev2/config.h | 2 +- keyboards/xd60/rev3/config.h | 2 +- keyboards/xd75/config.h | 4 ++-- keyboards/xd84/config.h | 2 +- keyboards/xd87/config.h | 2 +- keyboards/xd96/config.h | 2 +- keyboards/xmmx/config.h | 2 +- keyboards/yd60mq/config.h | 3 +-- keyboards/yd68/config.h | 2 +- keyboards/yosino58/rev1/config.h | 4 ++-- keyboards/z150_blackheart/config.h | 2 +- keyboards/zeal60/config.h | 2 +- keyboards/zeal60/zeal60.c | 5 ++--- keyboards/zeal65/config.h | 2 +- keyboards/zinc/rev1/config.h | 4 ++-- keyboards/zinc/reva/config.h | 4 ++-- keyboards/zlant/config.h | 2 +- 448 files changed, 594 insertions(+), 627 deletions(-) (limited to 'docs') diff --git a/docs/config_options.md b/docs/config_options.md index cab3c0747a..f4035809a7 100644 --- a/docs/config_options.md +++ b/docs/config_options.md @@ -83,7 +83,7 @@ This is a C header file that is one of the first things included, and will persi * enables backlight breathing (only works with backlight pins B5, B6 and B7) * `#define BREATHING_PERIOD 6` * the length of one backlight "breath" in seconds -* `#define DEBOUNCING_DELAY 5` +* `#define DEBOUNCE 5` * the delay when reading the value of the pin (5 is default) * `#define LOCKING_SUPPORT_ENABLE` * mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap diff --git a/docs/feature_bootmagic.md b/docs/feature_bootmagic.md index 39e4e47f4e..225189ccb7 100644 --- a/docs/feature_bootmagic.md +++ b/docs/feature_bootmagic.md @@ -140,7 +140,7 @@ To replace the function, all you need to do is add something like this to your c ```c void bootmagic_lite(void) { matrix_scan(); - wait_ms(DEBOUNCING_DELAY * 2); + wait_ms(DEBOUNCE * 2); matrix_scan(); if (matrix_get_row(BOOTMAGIC_LITE_ROW) & (1 << BOOTMAGIC_LITE_COLUMN)) { diff --git a/keyboards/1upkeyboards/1up60hse/config.h b/keyboards/1upkeyboards/1up60hse/config.h index 1886036225..3781d7bcf0 100644 --- a/keyboards/1upkeyboards/1up60hse/config.h +++ b/keyboards/1upkeyboards/1up60hse/config.h @@ -62,7 +62,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/1upkeyboards/1up60hte/config.h b/keyboards/1upkeyboards/1up60hte/config.h index 892a8b9fe8..bcf6329f76 100644 --- a/keyboards/1upkeyboards/1up60hte/config.h +++ b/keyboards/1upkeyboards/1up60hte/config.h @@ -47,7 +47,7 @@ along with this program. If not, see . #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE @@ -62,4 +62,4 @@ along with this program. If not, see . #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_VAL_STEP 8 -#endif \ No newline at end of file +#endif diff --git a/keyboards/1upkeyboards/1up60rgb/config.h b/keyboards/1upkeyboards/1up60rgb/config.h index fbafe0c44b..6cf5b69045 100644 --- a/keyboards/1upkeyboards/1up60rgb/config.h +++ b/keyboards/1upkeyboards/1up60rgb/config.h @@ -29,7 +29,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/1upkeyboards/super16/config.h b/keyboards/1upkeyboards/super16/config.h index 4af4dda63a..a50821637e 100644 --- a/keyboards/1upkeyboards/super16/config.h +++ b/keyboards/1upkeyboards/super16/config.h @@ -80,7 +80,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/1upkeyboards/sweet16/config.h b/keyboards/1upkeyboards/sweet16/config.h index b05b577400..23b590c2c1 100644 --- a/keyboards/1upkeyboards/sweet16/config.h +++ b/keyboards/1upkeyboards/sweet16/config.h @@ -29,7 +29,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE @@ -45,4 +45,3 @@ #define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_VAL_STEP 8 #endif - diff --git a/keyboards/40percentclub/25/config.h b/keyboards/40percentclub/25/config.h index 7381a76d92..c9c02b47e2 100644 --- a/keyboards/40percentclub/25/config.h +++ b/keyboards/40percentclub/25/config.h @@ -71,7 +71,7 @@ // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/40percentclub/4x4/config.h b/keyboards/40percentclub/4x4/config.h index 3b41e501d4..09ec5a4ec9 100644 --- a/keyboards/40percentclub/4x4/config.h +++ b/keyboards/40percentclub/4x4/config.h @@ -38,7 +38,7 @@ // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/40percentclub/5x5/config.h b/keyboards/40percentclub/5x5/config.h index f1c348a48f..a9d294bc94 100644 --- a/keyboards/40percentclub/5x5/config.h +++ b/keyboards/40percentclub/5x5/config.h @@ -47,7 +47,7 @@ // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/40percentclub/6lit/config.h b/keyboards/40percentclub/6lit/config.h index c6beafa412..110362a628 100644 --- a/keyboards/40percentclub/6lit/config.h +++ b/keyboards/40percentclub/6lit/config.h @@ -72,7 +72,7 @@ // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/40percentclub/foobar/config.h b/keyboards/40percentclub/foobar/config.h index 1443c1ca1d..15af4ad5bd 100644 --- a/keyboards/40percentclub/foobar/config.h +++ b/keyboards/40percentclub/foobar/config.h @@ -72,7 +72,7 @@ // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/40percentclub/gherkin/config.h b/keyboards/40percentclub/gherkin/config.h index d0c2be35be..4dc794e347 100644 --- a/keyboards/40percentclub/gherkin/config.h +++ b/keyboards/40percentclub/gherkin/config.h @@ -29,7 +29,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/40percentclub/half_n_half/config.h b/keyboards/40percentclub/half_n_half/config.h index c74fcacbb9..cd7515f0ba 100644 --- a/keyboards/40percentclub/half_n_half/config.h +++ b/keyboards/40percentclub/half_n_half/config.h @@ -81,7 +81,7 @@ along with this program. If not, see . // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/40percentclub/i75/config.h b/keyboards/40percentclub/i75/config.h index 611ae62b3d..f9b5d57ddf 100644 --- a/keyboards/40percentclub/i75/config.h +++ b/keyboards/40percentclub/i75/config.h @@ -27,7 +27,7 @@ #define DESCRIPTION i75 15x5 ortholinear keyboard /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/40percentclub/luddite/config.h b/keyboards/40percentclub/luddite/config.h index 5a6f2c799c..36bda06143 100644 --- a/keyboards/40percentclub/luddite/config.h +++ b/keyboards/40percentclub/luddite/config.h @@ -26,7 +26,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/40percentclub/mf68/config.h b/keyboards/40percentclub/mf68/config.h index 25252d1603..5bda9bb786 100644 --- a/keyboards/40percentclub/mf68/config.h +++ b/keyboards/40percentclub/mf68/config.h @@ -75,7 +75,7 @@ along with this program. If not, see . // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/40percentclub/nein/config.h b/keyboards/40percentclub/nein/config.h index 05fd93d244..da1bc91dd1 100644 --- a/keyboards/40percentclub/nein/config.h +++ b/keyboards/40percentclub/nein/config.h @@ -76,7 +76,7 @@ // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/40percentclub/nori/config.h b/keyboards/40percentclub/nori/config.h index a3366de621..ecaa68ada0 100644 --- a/keyboards/40percentclub/nori/config.h +++ b/keyboards/40percentclub/nori/config.h @@ -60,7 +60,7 @@ #define RGBLIGHT_VAL_STEP 8 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/40percentclub/tomato/config.h b/keyboards/40percentclub/tomato/config.h index db90d8042b..e131ce5c20 100644 --- a/keyboards/40percentclub/tomato/config.h +++ b/keyboards/40percentclub/tomato/config.h @@ -23,7 +23,7 @@ #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE diff --git a/keyboards/40percentclub/ut47/config.h b/keyboards/40percentclub/ut47/config.h index 87f2bedd73..25ef4271fb 100644 --- a/keyboards/40percentclub/ut47/config.h +++ b/keyboards/40percentclub/ut47/config.h @@ -43,7 +43,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/abstract/ellipse/rev1/config.h b/keyboards/abstract/ellipse/rev1/config.h index 4fcf96eb30..a56bfba2fa 100644 --- a/keyboards/abstract/ellipse/rev1/config.h +++ b/keyboards/abstract/ellipse/rev1/config.h @@ -75,7 +75,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/acr60/config.h b/keyboards/acr60/config.h index ab5a1932bc..9b2b2a2f00 100644 --- a/keyboards/acr60/config.h +++ b/keyboards/acr60/config.h @@ -28,7 +28,7 @@ #define BACKLIGHT_LEVELS 5 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/adkb96/rev1/config.h b/keyboards/adkb96/rev1/config.h index 8bdacb4cb3..cff135c261 100644 --- a/keyboards/adkb96/rev1/config.h +++ b/keyboards/adkb96/rev1/config.h @@ -22,7 +22,7 @@ along with this program. If not, see . #define DEVICE_VER 0x0001 #define MANUFACTURER Bit Trade One #define PRODUCT ADKB96 -#define DESCRIPTION +#define DESCRIPTION /* key matrix size */ // Rows are doubled-up @@ -45,7 +45,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE @@ -75,4 +75,3 @@ along with this program. If not, see . //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION - diff --git a/keyboards/aeboards/aegis/config.h b/keyboards/aeboards/aegis/config.h index 787c0f4850..8db31b254d 100644 --- a/keyboards/aeboards/aegis/config.h +++ b/keyboards/aeboards/aegis/config.h @@ -39,7 +39,7 @@ #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE @@ -68,4 +68,3 @@ #define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 899 #define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 125 #define DYNAMIC_KEYMAP_MACRO_COUNT 16 - diff --git a/keyboards/ai03/lunar/config.h b/keyboards/ai03/lunar/config.h index 2fe66d4bce..a9d1925546 100644 --- a/keyboards/ai03/lunar/config.h +++ b/keyboards/ai03/lunar/config.h @@ -80,7 +80,7 @@ along with this program. If not, see . // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST @@ -262,5 +262,5 @@ along with this program. If not, see . // DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR = DYNAMIC_KEYMAP_EEPROM_ADDR + (DYNAMIC_KEYMAP_LAYER_COUNT * MATRIX_ROWS * MATRIX_COLS * 2) #define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 635 // DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE = 1024 - DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR -#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 389 +#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 389 #define DYNAMIC_KEYMAP_MACRO_COUNT 16 diff --git a/keyboards/ai03/orbit/config.h b/keyboards/ai03/orbit/config.h index f4dc4fd636..00945ac796 100644 --- a/keyboards/ai03/orbit/config.h +++ b/keyboards/ai03/orbit/config.h @@ -89,7 +89,7 @@ along with this program. If not, see . // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/al1/config.h b/keyboards/al1/config.h index 838d569638..f4ded4346c 100644 --- a/keyboards/al1/config.h +++ b/keyboards/al1/config.h @@ -51,7 +51,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/al1/matrix.c b/keyboards/al1/matrix.c index 0b7ec2c8a6..f6e9510873 100644 --- a/keyboards/al1/matrix.c +++ b/keyboards/al1/matrix.c @@ -7,10 +7,10 @@ #include "util.h" #include "matrix.h" -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -static uint8_t debouncing = DEBOUNCING_DELAY; +static uint8_t debouncing = DEBOUNCE; static matrix_row_t matrix[MATRIX_ROWS]; static matrix_row_t matrix_debouncing[MATRIX_ROWS]; @@ -69,7 +69,7 @@ uint8_t matrix_scan(void) { bool curr_bit = rows & (1<. #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/alf/x11/config.h b/keyboards/alf/x11/config.h index 14c97247b5..587e97cd87 100644 --- a/keyboards/alf/x11/config.h +++ b/keyboards/alf/x11/config.h @@ -80,7 +80,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/alf/x2/config.h b/keyboards/alf/x2/config.h index 21d919983a..205fa358fc 100644 --- a/keyboards/alf/x2/config.h +++ b/keyboards/alf/x2/config.h @@ -30,7 +30,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/alpha/config.h b/keyboards/alpha/config.h index b177c8a4b5..b7348bef17 100755 --- a/keyboards/alpha/config.h +++ b/keyboards/alpha/config.h @@ -30,7 +30,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/alu84/config.h b/keyboards/alu84/config.h index 257c22e537..130e2f1b40 100755 --- a/keyboards/alu84/config.h +++ b/keyboards/alu84/config.h @@ -46,7 +46,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/amj40/config.h b/keyboards/amj40/config.h index 4d5e4889c2..f9a3c1ac69 100755 --- a/keyboards/amj40/config.h +++ b/keyboards/amj40/config.h @@ -47,7 +47,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/amj60/config.h b/keyboards/amj60/config.h index 165f20cd40..81b70111b1 100644 --- a/keyboards/amj60/config.h +++ b/keyboards/amj60/config.h @@ -47,7 +47,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/amj96/config.h b/keyboards/amj96/config.h index 866bcd5266..1f1be03ce2 100644 --- a/keyboards/amj96/config.h +++ b/keyboards/amj96/config.h @@ -64,7 +64,7 @@ along with this program. If not, see . #define BACKLIGHT_CUSTOM /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/amjpad/config.h b/keyboards/amjpad/config.h index f568d82f00..bbb48624f8 100644 --- a/keyboards/amjpad/config.h +++ b/keyboards/amjpad/config.h @@ -47,7 +47,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/ares/config.h b/keyboards/ares/config.h index f278c6fdca..cca26aab3e 100644 --- a/keyboards/ares/config.h +++ b/keyboards/ares/config.h @@ -34,7 +34,7 @@ along with this program. If not, see . #define UNUSED_PINS {} #define DIODE_DIRECTION COL2ROW -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #define NO_BACKLIGHT_CLOCK #define BACKLIGHT_LEVELS 1 @@ -48,4 +48,4 @@ along with this program. If not, see . /* Bootmagic Lite key configuration */ // #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 \ No newline at end of file +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/at101_blackheart/config.h b/keyboards/at101_blackheart/config.h index af4be3d714..83814c6486 100644 --- a/keyboards/at101_blackheart/config.h +++ b/keyboards/at101_blackheart/config.h @@ -23,7 +23,7 @@ #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/atom47/rev2/config.h b/keyboards/atom47/rev2/config.h index 7a044620bf..c38cd450ed 100644 --- a/keyboards/atom47/rev2/config.h +++ b/keyboards/atom47/rev2/config.h @@ -47,7 +47,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/atom47/rev3/config.h b/keyboards/atom47/rev3/config.h index e14800b0f8..5a302abff4 100644 --- a/keyboards/atom47/rev3/config.h +++ b/keyboards/atom47/rev3/config.h @@ -47,7 +47,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Backlight configuration */ diff --git a/keyboards/atomic/config.h b/keyboards/atomic/config.h index 8af23ffeb1..045f867277 100644 --- a/keyboards/atomic/config.h +++ b/keyboards/atomic/config.h @@ -52,7 +52,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/atomic/keymaps/pvc/config.h b/keyboards/atomic/keymaps/pvc/config.h index 50afa76884..3803a2ccd0 100644 --- a/keyboards/atomic/keymaps/pvc/config.h +++ b/keyboards/atomic/keymaps/pvc/config.h @@ -37,7 +37,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/atreus/config.h b/keyboards/atreus/config.h index 18c66c4e2a..b1559a29d8 100644 --- a/keyboards/atreus/config.h +++ b/keyboards/atreus/config.h @@ -59,7 +59,7 @@ along with this program. If not, see . //#define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/atreus/keymaps/alphadox/config.h b/keyboards/atreus/keymaps/alphadox/config.h index e81029a032..e998e5edc3 100644 --- a/keyboards/atreus/keymaps/alphadox/config.h +++ b/keyboards/atreus/keymaps/alphadox/config.h @@ -47,7 +47,7 @@ along with this program. If not, see . //#define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/atreus/keymaps/dvorak_42_key/config.h b/keyboards/atreus/keymaps/dvorak_42_key/config.h index 953178ee42..12a221d7f5 100644 --- a/keyboards/atreus/keymaps/dvorak_42_key/config.h +++ b/keyboards/atreus/keymaps/dvorak_42_key/config.h @@ -71,7 +71,7 @@ along with this program. If not, see . //#define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/atreus/keymaps/erlandsona/config.h b/keyboards/atreus/keymaps/erlandsona/config.h index 5af7e6e6cf..4a7ade96ad 100644 --- a/keyboards/atreus/keymaps/erlandsona/config.h +++ b/keyboards/atreus/keymaps/erlandsona/config.h @@ -62,7 +62,7 @@ along with this program. If not, see . //#define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/atreus62/config.h b/keyboards/atreus62/config.h index 67b5f9cb20..a7fe5f3542 100644 --- a/keyboards/atreus62/config.h +++ b/keyboards/atreus62/config.h @@ -48,7 +48,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/baguette/baguette.c b/keyboards/baguette/baguette.c index 6a8df873ab..751a317256 100644 --- a/keyboards/baguette/baguette.c +++ b/keyboards/baguette/baguette.c @@ -23,7 +23,7 @@ void bootmagic_lite(void) // We need multiple scans because debouncing can't be turned off. matrix_scan(); - wait_ms(DEBOUNCING_DELAY); + wait_ms(DEBOUNCE); matrix_scan(); // If the Esc and space bar are held down on power up, diff --git a/keyboards/baguette/config.h b/keyboards/baguette/config.h index 1259d70559..9aa525cfd5 100644 --- a/keyboards/baguette/config.h +++ b/keyboards/baguette/config.h @@ -62,7 +62,7 @@ along with this program. If not, see . // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/bantam44/config.h b/keyboards/bantam44/config.h index 3238528500..5b1885d83c 100644 --- a/keyboards/bantam44/config.h +++ b/keyboards/bantam44/config.h @@ -49,7 +49,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/bfake/config.h b/keyboards/bfake/config.h index 01fd4dff3f..235181d095 100644 --- a/keyboards/bfake/config.h +++ b/keyboards/bfake/config.h @@ -35,7 +35,7 @@ along with this program. If not, see . #define UNUSED_PINS #define DIODE_DIRECTION COL2ROW -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #define NO_BACKLIGHT_CLOCK #define BACKLIGHT_LEVELS 1 diff --git a/keyboards/bigseries/1key/config.h b/keyboards/bigseries/1key/config.h index 966f2062c4..66a0124721 100755 --- a/keyboards/bigseries/1key/config.h +++ b/keyboards/bigseries/1key/config.h @@ -40,7 +40,7 @@ along with this program. If not, see . #define DIODE_DIRECTION ROW2COL /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 50 +#define DEBOUNCE 50 /* key combination for command */ #define IS_COMMAND() ( \ diff --git a/keyboards/bigseries/2key/config.h b/keyboards/bigseries/2key/config.h index 79b9ed3786..535be27e76 100755 --- a/keyboards/bigseries/2key/config.h +++ b/keyboards/bigseries/2key/config.h @@ -40,7 +40,7 @@ along with this program. If not, see . #define DIODE_DIRECTION ROW2COL /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 50 +#define DEBOUNCE 50 /* key combination for command */ #define IS_COMMAND() ( \ diff --git a/keyboards/bigseries/3key/config.h b/keyboards/bigseries/3key/config.h index 9963a82197..faf1667255 100755 --- a/keyboards/bigseries/3key/config.h +++ b/keyboards/bigseries/3key/config.h @@ -40,7 +40,7 @@ along with this program. If not, see . #define DIODE_DIRECTION ROW2COL /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 50 +#define DEBOUNCE 50 /* key combination for command */ #define IS_COMMAND() ( \ diff --git a/keyboards/bigseries/4key/config.h b/keyboards/bigseries/4key/config.h index a222512d3c..79fdeb6edc 100755 --- a/keyboards/bigseries/4key/config.h +++ b/keyboards/bigseries/4key/config.h @@ -40,7 +40,7 @@ along with this program. If not, see . #define DIODE_DIRECTION ROW2COL /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 50 +#define DEBOUNCE 50 /* key combination for command */ #define IS_COMMAND() ( \ diff --git a/keyboards/bigswitch/config.h b/keyboards/bigswitch/config.h index a0ef6b5554..220f2591bf 100755 --- a/keyboards/bigswitch/config.h +++ b/keyboards/bigswitch/config.h @@ -40,7 +40,7 @@ along with this program. If not, see . #define DIODE_DIRECTION ROW2COL /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 50 +#define DEBOUNCE 50 /* key combination for command */ #define IS_COMMAND() ( \ diff --git a/keyboards/bigswitch/keymaps/wanleg/config.h b/keyboards/bigswitch/keymaps/wanleg/config.h index 0c6790618e..54abb9a6c1 100644 --- a/keyboards/bigswitch/keymaps/wanleg/config.h +++ b/keyboards/bigswitch/keymaps/wanleg/config.h @@ -32,8 +32,8 @@ #define BREATHING_PERIOD 5 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#undef DEBOUNCING_DELAY -#define DEBOUNCING_DELAY 5 +#undef DEBOUNCE +#define DEBOUNCE 5 // set flashing LED with QMK DFU #define QMK_LED B0 diff --git a/keyboards/blockey/config.h b/keyboards/blockey/config.h index 9bf64ef002..8934fd63a5 100644 --- a/keyboards/blockey/config.h +++ b/keyboards/blockey/config.h @@ -59,7 +59,7 @@ along with this program. If not, see . #define RGBLIGHT_ANIMATIONS /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/bm16a/config.h b/keyboards/bm16a/config.h index c6b460a118..fc0405475c 100644 --- a/keyboards/bm16a/config.h +++ b/keyboards/bm16a/config.h @@ -81,7 +81,7 @@ // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/bm16s/config.h b/keyboards/bm16s/config.h index 568e80b396..379e59bd9d 100755 --- a/keyboards/bm16s/config.h +++ b/keyboards/bm16s/config.h @@ -28,7 +28,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/boardwalk/config.h b/keyboards/boardwalk/config.h index 67352b80d0..7747502083 100644 --- a/keyboards/boardwalk/config.h +++ b/keyboards/boardwalk/config.h @@ -50,7 +50,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 6 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/bpiphany/frosty_flake/config.h b/keyboards/bpiphany/frosty_flake/config.h index a797fef428..250a1b775b 100644 --- a/keyboards/bpiphany/frosty_flake/config.h +++ b/keyboards/bpiphany/frosty_flake/config.h @@ -45,7 +45,7 @@ along with this program. If not, see . #define UNUSED_PINS { B0, C4, D3 } /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/bpiphany/frosty_flake/matrix.c b/keyboards/bpiphany/frosty_flake/matrix.c index 480e3455ba..3c49e9c000 100644 --- a/keyboards/bpiphany/frosty_flake/matrix.c +++ b/keyboards/bpiphany/frosty_flake/matrix.c @@ -24,10 +24,10 @@ #include "util.h" #include "matrix.h" -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -static uint8_t debouncing = DEBOUNCING_DELAY; +static uint8_t debouncing = DEBOUNCE; static matrix_row_t matrix[MATRIX_ROWS]; static matrix_row_t matrix_debouncing[MATRIX_ROWS]; @@ -111,7 +111,7 @@ uint8_t matrix_scan(void) { bool curr_bit = col_scan & (1<. // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/bpiphany/kitten_paw/matrix.c b/keyboards/bpiphany/kitten_paw/matrix.c index 6fdbfffd62..b59089cdf4 100644 --- a/keyboards/bpiphany/kitten_paw/matrix.c +++ b/keyboards/bpiphany/kitten_paw/matrix.c @@ -24,10 +24,10 @@ #include "util.h" #include "matrix.h" -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -static uint8_t debouncing = DEBOUNCING_DELAY; +static uint8_t debouncing = DEBOUNCE; static matrix_row_t matrix[MATRIX_ROWS]; static matrix_row_t matrix_debouncing[MATRIX_ROWS]; @@ -98,7 +98,7 @@ uint8_t matrix_scan(void) { bool curr_bit = rows & (1<. #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #endif diff --git a/keyboards/bpiphany/pegasushoof/matrix.c b/keyboards/bpiphany/pegasushoof/matrix.c index 127433875d..a670d53823 100644 --- a/keyboards/bpiphany/pegasushoof/matrix.c +++ b/keyboards/bpiphany/pegasushoof/matrix.c @@ -26,7 +26,7 @@ along with this program. If not, see . #include "util.h" #include "matrix.h" -static uint8_t debouncing = DEBOUNCING_DELAY; +static uint8_t debouncing = DEBOUNCE; static matrix_row_t matrix[MATRIX_ROWS]; static matrix_row_t matrix_debouncing[MATRIX_ROWS]; @@ -90,7 +90,7 @@ uint8_t matrix_scan(void) bool curr_bit = rows & (1<. #define UNUSED_PINS { B0, C4, D3 } /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/bpiphany/tiger_lily/matrix.c b/keyboards/bpiphany/tiger_lily/matrix.c index 3b48f6b368..47a92268c8 100644 --- a/keyboards/bpiphany/tiger_lily/matrix.c +++ b/keyboards/bpiphany/tiger_lily/matrix.c @@ -24,10 +24,10 @@ #include "util.h" #include "matrix.h" -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -static uint8_t debouncing = DEBOUNCING_DELAY; +static uint8_t debouncing = DEBOUNCE; static matrix_row_t matrix[MATRIX_ROWS]; static matrix_row_t matrix_debouncing[MATRIX_ROWS]; @@ -111,7 +111,7 @@ uint8_t matrix_scan(void) { bool curr_bit = col_scan & (1<. #define MATRIX_COLS 18 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/bpiphany/unloved_bastard/matrix.c b/keyboards/bpiphany/unloved_bastard/matrix.c index bb6de8613a..328d9015c2 100644 --- a/keyboards/bpiphany/unloved_bastard/matrix.c +++ b/keyboards/bpiphany/unloved_bastard/matrix.c @@ -43,10 +43,10 @@ __attribute__ ((weak)) void matrix_scan_user(void) { } -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -static uint8_t debouncing = DEBOUNCING_DELAY; +static uint8_t debouncing = DEBOUNCE; static matrix_row_t matrix[MATRIX_ROWS]; static matrix_row_t matrix_debouncing[MATRIX_ROWS]; @@ -112,7 +112,7 @@ uint8_t matrix_scan(void) { bool curr_bit = col_scan & (1<. // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/butterstick/config.h b/keyboards/butterstick/config.h index 4c104deb22..90875d2eed 100644 --- a/keyboards/butterstick/config.h +++ b/keyboards/butterstick/config.h @@ -11,7 +11,7 @@ #define DESCRIPTION Its a stick of butter #define VERSION "Paula Deen" -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #define FORCE_NKRO /* key matrix size */ @@ -23,4 +23,3 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION ROW2COL - diff --git a/keyboards/canoe/config.h b/keyboards/canoe/config.h index d552fee5b4..cddb749dc1 100644 --- a/keyboards/canoe/config.h +++ b/keyboards/canoe/config.h @@ -35,7 +35,7 @@ along with this program. If not, see . #define UNUSED_PINS #define DIODE_DIRECTION COL2ROW -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #define NO_BACKLIGHT_CLOCK #define BACKLIGHT_LEVELS 1 diff --git a/keyboards/catch22/config.h b/keyboards/catch22/config.h index c5cf8233db..05c336a3ff 100644 --- a/keyboards/catch22/config.h +++ b/keyboards/catch22/config.h @@ -39,7 +39,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -// #define DEBOUNCING_DELAY 0 +// #define DEBOUNCE 0 /* key combination for command */ #define IS_COMMAND() ( \ diff --git a/keyboards/christmas_tree/config.h b/keyboards/christmas_tree/config.h index 769a9e98b6..66fccebdb9 100644 --- a/keyboards/christmas_tree/config.h +++ b/keyboards/christmas_tree/config.h @@ -48,7 +48,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/ckeys/handwire_101/config.h b/keyboards/ckeys/handwire_101/config.h index 40faec066b..3dc99319ed 100755 --- a/keyboards/ckeys/handwire_101/config.h +++ b/keyboards/ckeys/handwire_101/config.h @@ -53,7 +53,7 @@ along with this program. If not, see . /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/ckeys/nakey/config.h b/keyboards/ckeys/nakey/config.h index cd8b1aa329..add3a35221 100644 --- a/keyboards/ckeys/nakey/config.h +++ b/keyboards/ckeys/nakey/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/ckeys/obelus/config.h b/keyboards/ckeys/obelus/config.h index 8d3bfa3b67..4d7afc4f52 100644 --- a/keyboards/ckeys/obelus/config.h +++ b/keyboards/ckeys/obelus/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/claw44/rev1/config.h b/keyboards/claw44/rev1/config.h index ba2ed4559e..f3406fee5c 100644 --- a/keyboards/claw44/rev1/config.h +++ b/keyboards/claw44/rev1/config.h @@ -43,7 +43,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ //#define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/clueboard/17/config.h b/keyboards/clueboard/17/config.h index 21728348db..b7e28cbb9f 100644 --- a/keyboards/clueboard/17/config.h +++ b/keyboards/clueboard/17/config.h @@ -52,7 +52,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Number of backlighting levels */ #define BACKLIGHT_LEVELS 3 diff --git a/keyboards/clueboard/2x1800/config.h b/keyboards/clueboard/2x1800/config.h index 62821f7663..e343011f95 100644 --- a/keyboards/clueboard/2x1800/config.h +++ b/keyboards/clueboard/2x1800/config.h @@ -50,7 +50,7 @@ along with this program. If not, see . #define DIODE_DIRECTION ROW2COL /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/clueboard/66/rev1/config.h b/keyboards/clueboard/66/rev1/config.h index f8fb4bd35b..9db64fbd49 100644 --- a/keyboards/clueboard/66/rev1/config.h +++ b/keyboards/clueboard/66/rev1/config.h @@ -25,7 +25,7 @@ #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/clueboard/66/rev2/config.h b/keyboards/clueboard/66/rev2/config.h index 9227cd2dfc..f11cfe82f7 100644 --- a/keyboards/clueboard/66/rev2/config.h +++ b/keyboards/clueboard/66/rev2/config.h @@ -24,7 +24,7 @@ #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/clueboard/66/rev3/config.h b/keyboards/clueboard/66/rev3/config.h index ba646f1575..bbbd82a1c0 100644 --- a/keyboards/clueboard/66/rev3/config.h +++ b/keyboards/clueboard/66/rev3/config.h @@ -24,7 +24,7 @@ #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/clueboard/66/rev4/config.h b/keyboards/clueboard/66/rev4/config.h index 540b387220..8ed1404783 100644 --- a/keyboards/clueboard/66/rev4/config.h +++ b/keyboards/clueboard/66/rev4/config.h @@ -30,7 +30,7 @@ #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/clueboard/66_hotswap/config.h b/keyboards/clueboard/66_hotswap/config.h index 2c265c9470..b25686fa17 100644 --- a/keyboards/clueboard/66_hotswap/config.h +++ b/keyboards/clueboard/66_hotswap/config.h @@ -28,7 +28,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/clueboard/card/config.h b/keyboards/clueboard/card/config.h index 9520c31a6f..9bf07f578b 100644 --- a/keyboards/clueboard/card/config.h +++ b/keyboards/clueboard/card/config.h @@ -41,7 +41,7 @@ along with this program. If not, see . #define DIODE_DIRECTION ROW2COL /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 20 +#define DEBOUNCE 20 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/contra/config.h b/keyboards/contra/config.h index 8e1369f129..b32d868654 100755 --- a/keyboards/contra/config.h +++ b/keyboards/contra/config.h @@ -30,7 +30,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/converter/hp_46010a/config.h b/keyboards/converter/hp_46010a/config.h index f77ed4115f..b7297ab884 100644 --- a/keyboards/converter/hp_46010a/config.h +++ b/keyboards/converter/hp_46010a/config.h @@ -30,6 +30,4 @@ along with this program. If not, see . #define MATRIX_COLS 8 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 - - +#define DEBOUNCE 5 diff --git a/keyboards/converter/hp_46010a/matrix.c b/keyboards/converter/hp_46010a/matrix.c index 2ca7d0357e..ac9224087f 100644 --- a/keyboards/converter/hp_46010a/matrix.c +++ b/keyboards/converter/hp_46010a/matrix.c @@ -34,18 +34,18 @@ along with this program. If not, see . #include "config.h" -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -#if ( DEBOUNCING_DELAY > 0 ) +#if ( DEBOUNCE > 0 ) static uint16_t debouncing_time ; static bool debouncing = false ; #endif static uint8_t matrix [MATRIX_ROWS] = {0}; -#if ( DEBOUNCING_DELAY > 0 ) +#if ( DEBOUNCE > 0 ) static uint8_t matrix_debounce_old [MATRIX_ROWS] = {0}; static uint8_t matrix_debounce_new [MATRIX_ROWS] = {0}; #endif @@ -172,7 +172,7 @@ uint8_t matrix_scan(void) { // the first byte of the keyboard's output data can be ignored Matrix_ThrowByte(); -#if ( DEBOUNCING_DELAY > 0 ) +#if ( DEBOUNCE > 0 ) for ( uint8_t row = 0 ; row < MATRIX_ROWS ; ++row ) { //transfer old debouncing values @@ -194,8 +194,8 @@ uint8_t matrix_scan(void) { #endif -#if ( DEBOUNCING_DELAY > 0 ) - if ( debouncing && ( timer_elapsed( debouncing_time ) > DEBOUNCING_DELAY ) ) { +#if ( DEBOUNCE > 0 ) + if ( debouncing && ( timer_elapsed( debouncing_time ) > DEBOUNCE ) ) { for ( uint8_t row = 0 ; row < MATRIX_ROWS ; ++row ) { matrix[row] = matrix_debounce_new[row] ; diff --git a/keyboards/converter/ibm_5291/config.h b/keyboards/converter/ibm_5291/config.h index 5c9ca1e4a9..9701bdfe97 100644 --- a/keyboards/converter/ibm_5291/config.h +++ b/keyboards/converter/ibm_5291/config.h @@ -37,6 +37,4 @@ along with this program. If not, see . /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 0 - - +#define DEBOUNCE 0 diff --git a/keyboards/converter/ibm_5291/matrix.c b/keyboards/converter/ibm_5291/matrix.c index 58f6e37b65..8b2dba7ab6 100644 --- a/keyboards/converter/ibm_5291/matrix.c +++ b/keyboards/converter/ibm_5291/matrix.c @@ -33,8 +33,8 @@ along with this program. If not, see . #include "config.h" -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif #define print_matrix_header() print("\nr/c 01234567\n") @@ -49,14 +49,14 @@ along with this program. If not, see . static const uint8_t row_pins [NUM_ROW_PINS] = MATRIX_ROW_PINS ; static const uint8_t col_pins [NUM_ROW_PINS] = MATRIX_COL_PINS ; -#if ( DEBOUNCING_DELAY > 0 ) +#if ( DEBOUNCE > 0 ) static uint16_t debouncing_time ; static bool debouncing = false ; #endif static uint8_t matrix [MATRIX_ROWS] = {0}; -#if ( DEBOUNCING_DELAY > 0 ) +#if ( DEBOUNCE > 0 ) static uint8_t matrix_debounce [MATRIX_ROWS] = {0}; #endif @@ -237,7 +237,7 @@ void matrix_init(void) { // initialize matrix state: all keys off for (uint8_t i = 0; i < MATRIX_ROWS; i++) { matrix[i] = 0; -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) matrix_debounce [i] = 0; # endif } @@ -247,7 +247,7 @@ void matrix_init(void) { uint8_t matrix_scan(void) { for ( uint8_t current_row = 0; current_row < MATRIX_ROWS; ++current_row ) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = matrix_read(matrix_debounce, current_row); if (matrix_changed) { @@ -260,8 +260,8 @@ uint8_t matrix_scan(void) { # endif } -# if (DEBOUNCING_DELAY > 0) - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { +# if (DEBOUNCE > 0) + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCE)) { for (uint8_t i = 0; i < MATRIX_ROWS; i++) { matrix[i] = matrix_debounce[i]; } diff --git a/keyboards/converter/modelm101/config.h b/keyboards/converter/modelm101/config.h index 97b78614ce..958b29b743 100644 --- a/keyboards/converter/modelm101/config.h +++ b/keyboards/converter/modelm101/config.h @@ -49,7 +49,7 @@ along with this program. If not, see . #define DIODE_DIRECTION ROW2COL /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed (5 is default) */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* * Magic Key Options @@ -120,4 +120,4 @@ along with this program. If not, see . //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION \ No newline at end of file +//#define NO_ACTION_FUNCTION diff --git a/keyboards/converter/numeric_keypad_IIe/config.h b/keyboards/converter/numeric_keypad_IIe/config.h index 8cf0eaa40f..a129e1210f 100644 --- a/keyboards/converter/numeric_keypad_IIe/config.h +++ b/keyboards/converter/numeric_keypad_IIe/config.h @@ -52,10 +52,10 @@ Header Pins Header / Matrix --------------- -Pin Name Description +Pin Name Description -------------------------------------------------------------- 1,2,5,3,4,6 Y0-Y5 Y-direction key-matrix connections -7 NC +7 NC 9,11,10,8 X4-X7 X-direction key-matrix connections @@ -98,4 +98,4 @@ http://wiki.apple2.org/index.php?title=Pinouts#Apple_.2F.2Fe_Numeric_Keypad_conn #define UNUSED_PINS #define DIODE_DIRECTION COL2ROW #define SOFT_SERIAL_PIN D0 -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 diff --git a/keyboards/coseyfannitutti/mullet/config.h b/keyboards/coseyfannitutti/mullet/config.h index 527294e51a..2025cb4333 100644 --- a/keyboards/coseyfannitutti/mullet/config.h +++ b/keyboards/coseyfannitutti/mullet/config.h @@ -63,7 +63,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST @@ -169,4 +169,3 @@ along with this program. If not, see . #define LCD_E_PIN 1 //< pin for Enable line #endif */ - diff --git a/keyboards/coseyfannitutti/mulletpad/config.h b/keyboards/coseyfannitutti/mulletpad/config.h index ad59410554..2174d64925 100644 --- a/keyboards/coseyfannitutti/mulletpad/config.h +++ b/keyboards/coseyfannitutti/mulletpad/config.h @@ -63,7 +63,7 @@ along with this program. If not, see . //#endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST @@ -169,4 +169,3 @@ along with this program. If not, see . #define LCD_E_PIN 1 //< pin for Enable line #endif */ - diff --git a/keyboards/cospad/config.h b/keyboards/cospad/config.h index b7e7ec384c..9844f2724a 100644 --- a/keyboards/cospad/config.h +++ b/keyboards/cospad/config.h @@ -58,7 +58,7 @@ along with this program. If not, see . #define RGBLIGHT_ANIMATIONS /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/crawlpad/config.h b/keyboards/crawlpad/config.h index a6d7ac2147..d51ad17444 100755 --- a/keyboards/crawlpad/config.h +++ b/keyboards/crawlpad/config.h @@ -26,7 +26,7 @@ #define DIODE_DIRECTION ROW2COL /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE @@ -44,4 +44,3 @@ #define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 3 #endif - diff --git a/keyboards/crkbd/rev1/config.h b/keyboards/crkbd/rev1/config.h index 6564c8503d..4ea8ff38cd 100644 --- a/keyboards/crkbd/rev1/config.h +++ b/keyboards/crkbd/rev1/config.h @@ -43,7 +43,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ //#define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/cu24/config.h b/keyboards/cu24/config.h index 1de9d33cb7..7bb49816b9 100644 --- a/keyboards/cu24/config.h +++ b/keyboards/cu24/config.h @@ -47,7 +47,7 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION ROW2COL - + /* Backlight */ #define BACKLIGHT_PIN B5 #define BACKLIGHT_BREATHING @@ -59,7 +59,7 @@ #define RGBLIGHT_ANIMATIONS /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/cu75/config.h b/keyboards/cu75/config.h index baaed33e6b..e01f947a02 100644 --- a/keyboards/cu75/config.h +++ b/keyboards/cu75/config.h @@ -42,7 +42,7 @@ along with this program. If not, see . #define RGBLIGHT_VAL_STEP 17 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/daisy/config.h b/keyboards/daisy/config.h index f397d28da6..567a215a6c 100644 --- a/keyboards/daisy/config.h +++ b/keyboards/daisy/config.h @@ -31,12 +31,12 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW - + #define BACKLIGHT_PIN D0 #define BACKLIGHT_LEVELS 6 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/dc01/arrow/config.h b/keyboards/dc01/arrow/config.h index e58967ac08..801dbb54de 100644 --- a/keyboards/dc01/arrow/config.h +++ b/keyboards/dc01/arrow/config.h @@ -53,7 +53,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/dc01/arrow/matrix.c b/keyboards/dc01/arrow/matrix.c index dd5e2ee9c9..1823138c39 100644 --- a/keyboards/dc01/arrow/matrix.c +++ b/keyboards/dc01/arrow/matrix.c @@ -36,11 +36,11 @@ along with this program. If not, see . /* Set 0 if debouncing isn't needed */ -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) static uint16_t debouncing_time; static bool debouncing = false; #endif @@ -155,7 +155,7 @@ uint8_t matrix_scan(void) // Set row, read cols for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_cols_on_row(matrix_debouncing, current_row); if (matrix_changed) { @@ -173,7 +173,7 @@ uint8_t matrix_scan(void) // Set col, read rows for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_rows_on_col(matrix_debouncing, current_col); if (matrix_changed) { debouncing = true; @@ -187,8 +187,8 @@ uint8_t matrix_scan(void) #endif -# if (DEBOUNCING_DELAY > 0) - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { +# if (DEBOUNCE > 0) + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCE)) { for (uint8_t i = 0; i < MATRIX_ROWS; i++) { matrix[i] = matrix_debouncing[i]; } @@ -209,7 +209,7 @@ uint8_t matrix_scan(void) bool matrix_is_modified(void) { -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) if (debouncing) return false; #endif return true; diff --git a/keyboards/dc01/left/config.h b/keyboards/dc01/left/config.h index 3f51373124..26ad41a056 100644 --- a/keyboards/dc01/left/config.h +++ b/keyboards/dc01/left/config.h @@ -56,7 +56,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/dc01/left/matrix.c b/keyboards/dc01/left/matrix.c index a3db220e4f..0e7b591f82 100644 --- a/keyboards/dc01/left/matrix.c +++ b/keyboards/dc01/left/matrix.c @@ -42,11 +42,11 @@ static uint8_t error_count_arrow = 0; /* Set 0 if debouncing isn't needed */ -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) static uint16_t debouncing_time; static bool debouncing = false; #endif @@ -169,7 +169,7 @@ uint8_t matrix_scan(void) // Set row, read cols for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_cols_on_row(matrix_debouncing, current_row); if (matrix_changed) { @@ -187,7 +187,7 @@ uint8_t matrix_scan(void) // Set col, read rows for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_rows_on_col(matrix_debouncing, current_col); if (matrix_changed) { debouncing = true; @@ -201,8 +201,8 @@ uint8_t matrix_scan(void) #endif -# if (DEBOUNCING_DELAY > 0) - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { +# if (DEBOUNCE > 0) + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCE)) { for (uint8_t i = 0; i < MATRIX_ROWS; i++) { matrix[i] = matrix_debouncing[i]; } @@ -249,7 +249,7 @@ uint8_t matrix_scan(void) bool matrix_is_modified(void) { -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) if (debouncing) return false; #endif return true; diff --git a/keyboards/dc01/numpad/config.h b/keyboards/dc01/numpad/config.h index a8a2445542..2e91cfdd9d 100644 --- a/keyboards/dc01/numpad/config.h +++ b/keyboards/dc01/numpad/config.h @@ -53,7 +53,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/dc01/numpad/matrix.c b/keyboards/dc01/numpad/matrix.c index 5a13f3ff24..f8b725adc2 100644 --- a/keyboards/dc01/numpad/matrix.c +++ b/keyboards/dc01/numpad/matrix.c @@ -36,11 +36,11 @@ along with this program. If not, see . /* Set 0 if debouncing isn't needed */ -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) static uint16_t debouncing_time; static bool debouncing = false; #endif @@ -155,7 +155,7 @@ uint8_t matrix_scan(void) // Set row, read cols for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_cols_on_row(matrix_debouncing, current_row); if (matrix_changed) { @@ -173,7 +173,7 @@ uint8_t matrix_scan(void) // Set col, read rows for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_rows_on_col(matrix_debouncing, current_col); if (matrix_changed) { debouncing = true; @@ -187,8 +187,8 @@ uint8_t matrix_scan(void) #endif -# if (DEBOUNCING_DELAY > 0) - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { +# if (DEBOUNCE > 0) + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCE)) { for (uint8_t i = 0; i < MATRIX_ROWS; i++) { matrix[i] = matrix_debouncing[i]; } @@ -209,7 +209,7 @@ uint8_t matrix_scan(void) bool matrix_is_modified(void) { -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) if (debouncing) return false; #endif return true; diff --git a/keyboards/dc01/right/config.h b/keyboards/dc01/right/config.h index 4933f58295..bbffb7814a 100644 --- a/keyboards/dc01/right/config.h +++ b/keyboards/dc01/right/config.h @@ -53,7 +53,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/dc01/right/matrix.c b/keyboards/dc01/right/matrix.c index 6d981797c3..6ec3a3b723 100644 --- a/keyboards/dc01/right/matrix.c +++ b/keyboards/dc01/right/matrix.c @@ -36,11 +36,11 @@ along with this program. If not, see . /* Set 0 if debouncing isn't needed */ -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) static uint16_t debouncing_time; static bool debouncing = false; #endif @@ -155,7 +155,7 @@ uint8_t matrix_scan(void) // Set row, read cols for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_cols_on_row(matrix_debouncing, current_row); if (matrix_changed) { @@ -173,7 +173,7 @@ uint8_t matrix_scan(void) // Set col, read rows for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_rows_on_col(matrix_debouncing, current_col); if (matrix_changed) { debouncing = true; @@ -187,8 +187,8 @@ uint8_t matrix_scan(void) #endif -# if (DEBOUNCING_DELAY > 0) - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { +# if (DEBOUNCE > 0) + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCE)) { for (uint8_t i = 0; i < MATRIX_ROWS; i++) { matrix[i] = matrix_debouncing[i]; } @@ -209,7 +209,7 @@ uint8_t matrix_scan(void) bool matrix_is_modified(void) { -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) if (debouncing) return false; #endif return true; diff --git a/keyboards/deltasplit75/matrix.c b/keyboards/deltasplit75/matrix.c index 1ac5c5039d..28198d89b0 100644 --- a/keyboards/deltasplit75/matrix.c +++ b/keyboards/deltasplit75/matrix.c @@ -37,11 +37,11 @@ along with this program. If not, see . # include "serial.h" #endif -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) static uint16_t debouncing_time; static bool debouncing = false; #endif @@ -140,7 +140,7 @@ uint8_t _matrix_scan(void) #if (DIODE_DIRECTION == COL2ROW) // Set row, read cols for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row); if (matrix_changed) { @@ -157,7 +157,7 @@ uint8_t _matrix_scan(void) #elif (DIODE_DIRECTION == ROW2COL) // Set col, read rows for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col); if (matrix_changed) { debouncing = true; @@ -170,8 +170,8 @@ uint8_t _matrix_scan(void) } #endif -# if (DEBOUNCING_DELAY > 0) - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { +# if (DEBOUNCE > 0) + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCE)) { for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { matrix[i+offset] = matrix_debouncing[i+offset]; } diff --git a/keyboards/deltasplit75/v2/config.h b/keyboards/deltasplit75/v2/config.h index fc85f9125b..6a2e48f4f4 100644 --- a/keyboards/deltasplit75/v2/config.h +++ b/keyboards/deltasplit75/v2/config.h @@ -47,7 +47,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/diverge3/config.h b/keyboards/diverge3/config.h index aa9f52fcbd..a593bca9db 100644 --- a/keyboards/diverge3/config.h +++ b/keyboards/diverge3/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 5 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* serial.c configuration for split keyboard */ #define SOFT_SERIAL_PIN D0 diff --git a/keyboards/divergetm2/config.h b/keyboards/divergetm2/config.h index 2cdc315dea..8ad948676d 100644 --- a/keyboards/divergetm2/config.h +++ b/keyboards/divergetm2/config.h @@ -49,7 +49,7 @@ #define DIODE_DIRECTION ROW2COL /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* number of backlight levels */ diff --git a/keyboards/dk60/config.h b/keyboards/dk60/config.h index 9df3847406..6a69516cb1 100644 --- a/keyboards/dk60/config.h +++ b/keyboards/dk60/config.h @@ -41,7 +41,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ - #define DEBOUNCING_DELAY 5 + #define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/do60/config.h b/keyboards/do60/config.h index 74d27de39e..82e818328c 100644 --- a/keyboards/do60/config.h +++ b/keyboards/do60/config.h @@ -55,7 +55,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* RGB Underglow * F5 PIN for DO60's pre-soldered WS2812 LEDs diff --git a/keyboards/donutcables/budget96/config.h b/keyboards/donutcables/budget96/config.h index 74661d828c..75aacb4d4f 100644 --- a/keyboards/donutcables/budget96/config.h +++ b/keyboards/donutcables/budget96/config.h @@ -34,7 +34,7 @@ along with this program. If not, see . #define UNUSED_PINS #define DIODE_DIRECTION COL2ROW -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #define NO_BACKLIGHT_CLOCK #define BACKLIGHT_LEVELS 1 diff --git a/keyboards/donutcables/scrabblepad/config.h b/keyboards/donutcables/scrabblepad/config.h index bf3d3db72a..d6490349e8 100644 --- a/keyboards/donutcables/scrabblepad/config.h +++ b/keyboards/donutcables/scrabblepad/config.h @@ -61,7 +61,7 @@ along with this program. If not, see . //#define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness) /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/doro67/rgb/config.h b/keyboards/doro67/rgb/config.h index 87a30e0847..16dc4fc0a4 100644 --- a/keyboards/doro67/rgb/config.h +++ b/keyboards/doro67/rgb/config.h @@ -53,7 +53,7 @@ along with this program. If not, see . // The number of LEDs connected #define DRIVER_LED_TOTAL 67 -#define RGB_MATRIX_KEYPRESSES +#define RGB_MATRIX_KEYPRESSES /* * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. @@ -63,7 +63,7 @@ along with this program. If not, see . #define RGBLED_NUM 67 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/dozen0/config.h b/keyboards/dozen0/config.h index 6b0f8525a3..9ea2c1795f 100644 --- a/keyboards/dozen0/config.h +++ b/keyboards/dozen0/config.h @@ -62,7 +62,7 @@ along with this program. If not, see . // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/duck/eagle_viper/v2/config.h b/keyboards/duck/eagle_viper/v2/config.h index a0ce866cc3..e328b1ee22 100644 --- a/keyboards/duck/eagle_viper/v2/config.h +++ b/keyboards/duck/eagle_viper/v2/config.h @@ -34,7 +34,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* number of backlight levels */ #define BACKLIGHT_LEVELS 3 @@ -48,4 +48,3 @@ along with this program. If not, see . #define BOOTMAGIC_LITE_COLUMN 10 #define TAPPING_TERM 200 - diff --git a/keyboards/duck/eagle_viper/v2/matrix.c b/keyboards/duck/eagle_viper/v2/matrix.c index b705ae49ff..0964493ac6 100644 --- a/keyboards/duck/eagle_viper/v2/matrix.c +++ b/keyboards/duck/eagle_viper/v2/matrix.c @@ -22,7 +22,7 @@ along with this program. If not, see . #include "print.h" #include "debug.h" -static uint8_t debouncing = DEBOUNCING_DELAY; +static uint8_t debouncing = DEBOUNCE; /* matrix state(1:on, 0:off) */ static matrix_row_t matrix[MATRIX_ROWS]; @@ -92,7 +92,7 @@ uint8_t matrix_scan(void) { if (debouncing) { dprint("bounce!: "); dprintf("%02X", debouncing); dprintln(); } - debouncing = DEBOUNCING_DELAY; + debouncing = DEBOUNCE; } } unselect_cols(); diff --git a/keyboards/duck/jetfire/config.h b/keyboards/duck/jetfire/config.h index 774e284918..f616bc238e 100644 --- a/keyboards/duck/jetfire/config.h +++ b/keyboards/duck/jetfire/config.h @@ -46,7 +46,7 @@ along with this program. If not, see . // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Set to top left most key */ #define BOOTMAGIC_LITE_ROW 5 diff --git a/keyboards/duck/jetfire/matrix.c b/keyboards/duck/jetfire/matrix.c index 51202aeb64..2dd94a72ac 100644 --- a/keyboards/duck/jetfire/matrix.c +++ b/keyboards/duck/jetfire/matrix.c @@ -21,7 +21,7 @@ along with this program. If not, see . #include "util.h" #include "matrix.h" -static uint8_t debouncing = DEBOUNCING_DELAY; +static uint8_t debouncing = DEBOUNCE; /* matrix state(1:on, 0:off) */ static matrix_row_t matrix[MATRIX_ROWS]; @@ -97,7 +97,7 @@ uint8_t matrix_scan(void) if (debouncing) { dprint("bounce!: "); dprintf("%02X", debouncing); dprintln(); } - debouncing = DEBOUNCING_DELAY; + debouncing = DEBOUNCE; } } unselect_cols(); diff --git a/keyboards/duck/lightsaver/config.h b/keyboards/duck/lightsaver/config.h index d302fb3953..5bb4e6faf9 100644 --- a/keyboards/duck/lightsaver/config.h +++ b/keyboards/duck/lightsaver/config.h @@ -34,7 +34,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* number of backlight levels */ #define BACKLIGHT_LEVELS 1 @@ -48,4 +48,3 @@ along with this program. If not, see . #define BOOTMAGIC_LITE_COLUMN 10 #define TAPPING_TERM 200 - diff --git a/keyboards/duck/lightsaver/matrix.c b/keyboards/duck/lightsaver/matrix.c index 543205c0b7..066452724f 100644 --- a/keyboards/duck/lightsaver/matrix.c +++ b/keyboards/duck/lightsaver/matrix.c @@ -22,7 +22,7 @@ along with this program. If not, see . #include "print.h" #include "debug.h" -static uint8_t debouncing = DEBOUNCING_DELAY; +static uint8_t debouncing = DEBOUNCE; /* matrix state(1:on, 0:off) */ static matrix_row_t matrix[MATRIX_ROWS]; @@ -90,7 +90,7 @@ uint8_t matrix_scan(void) { if (debouncing) { dprint("bounce!: "); dprintf("%02X", debouncing); dprintln(); } - debouncing = DEBOUNCING_DELAY; + debouncing = DEBOUNCE; } } unselect_cols(); diff --git a/keyboards/duck/octagon/v1/config.h b/keyboards/duck/octagon/v1/config.h index d818cb6223..45e87de4ba 100644 --- a/keyboards/duck/octagon/v1/config.h +++ b/keyboards/duck/octagon/v1/config.h @@ -34,7 +34,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* number of backlight levels */ #define BACKLIGHT_LEVELS 1 diff --git a/keyboards/duck/octagon/v1/matrix.c b/keyboards/duck/octagon/v1/matrix.c index 233404ed30..a2bea865bc 100644 --- a/keyboards/duck/octagon/v1/matrix.c +++ b/keyboards/duck/octagon/v1/matrix.c @@ -22,7 +22,7 @@ along with this program. If not, see . #include "print.h" #include "debug.h" -static uint8_t debouncing = DEBOUNCING_DELAY; +static uint8_t debouncing = DEBOUNCE; /* matrix state(1:on, 0:off) */ static matrix_row_t matrix[MATRIX_ROWS]; @@ -87,7 +87,7 @@ uint8_t matrix_scan(void) { if (debouncing) { dprint("bounce!: "); dprintf("%02X", debouncing); dprintln(); } - debouncing = DEBOUNCING_DELAY; + debouncing = DEBOUNCE; } } unselect_cols(); diff --git a/keyboards/duck/octagon/v2/config.h b/keyboards/duck/octagon/v2/config.h index 4aab587f66..82b0c8a997 100644 --- a/keyboards/duck/octagon/v2/config.h +++ b/keyboards/duck/octagon/v2/config.h @@ -34,7 +34,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* number of backlight levels */ #define BACKLIGHT_LEVELS 1 @@ -48,4 +48,3 @@ along with this program. If not, see . #define BOOTMAGIC_LITE_COLUMN 10 #define TAPPING_TERM 200 - diff --git a/keyboards/duck/octagon/v2/matrix.c b/keyboards/duck/octagon/v2/matrix.c index e6e7046b45..25d1e45b05 100644 --- a/keyboards/duck/octagon/v2/matrix.c +++ b/keyboards/duck/octagon/v2/matrix.c @@ -22,7 +22,7 @@ along with this program. If not, see . #include "print.h" #include "debug.h" -static uint8_t debouncing = DEBOUNCING_DELAY; +static uint8_t debouncing = DEBOUNCE; /* matrix state(1:on, 0:off) */ static matrix_row_t matrix[MATRIX_ROWS]; @@ -92,7 +92,7 @@ uint8_t matrix_scan(void) { if (debouncing) { dprint("bounce!: "); dprintf("%02X", debouncing); dprintln(); } - debouncing = DEBOUNCING_DELAY; + debouncing = DEBOUNCE; } } unselect_cols(); diff --git a/keyboards/dz60/config.h b/keyboards/dz60/config.h index 46702adcdf..8d66c35847 100644 --- a/keyboards/dz60/config.h +++ b/keyboards/dz60/config.h @@ -28,7 +28,7 @@ #define BACKLIGHT_LEVELS 5 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/dz60/keymaps/LEdiodes/config.h b/keyboards/dz60/keymaps/LEdiodes/config.h index 6cdc4a91e3..196d05c533 100644 --- a/keyboards/dz60/keymaps/LEdiodes/config.h +++ b/keyboards/dz60/keymaps/LEdiodes/config.h @@ -28,7 +28,7 @@ #define BACKLIGHT_LEVELS 5 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/eco/config.h b/keyboards/eco/config.h index f5820eafca..a6ae1821a7 100644 --- a/keyboards/eco/config.h +++ b/keyboards/eco/config.h @@ -38,7 +38,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/ep/40/config.h b/keyboards/ep/40/config.h index b7f99a3b7c..c954882b81 100644 --- a/keyboards/ep/40/config.h +++ b/keyboards/ep/40/config.h @@ -48,7 +48,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/ep/96/config.h b/keyboards/ep/96/config.h index 152b04b628..22d406fd5d 100644 --- a/keyboards/ep/96/config.h +++ b/keyboards/ep/96/config.h @@ -51,7 +51,7 @@ along with this program. If not, see . // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/ergo42/matrix.c b/keyboards/ergo42/matrix.c index fc42dd14d9..328d16c77b 100644 --- a/keyboards/ergo42/matrix.c +++ b/keyboards/ergo42/matrix.c @@ -37,11 +37,11 @@ along with this program. If not, see . # include "serial.h" #endif -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) static uint16_t debouncing_time; static bool debouncing = false; #endif @@ -145,7 +145,7 @@ uint8_t _matrix_scan(void) #if (DIODE_DIRECTION == COL2ROW) // Set row, read cols for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row); if (matrix_changed) { @@ -162,7 +162,7 @@ uint8_t _matrix_scan(void) #elif (DIODE_DIRECTION == ROW2COL) // Set col, read rows for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col); if (matrix_changed) { debouncing = true; @@ -175,8 +175,8 @@ uint8_t _matrix_scan(void) } #endif -# if (DEBOUNCING_DELAY > 0) - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { +# if (DEBOUNCE > 0) + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCE)) { for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { matrix[i+offset] = matrix_debouncing[i+offset]; } diff --git a/keyboards/ergo42/rev1/config.h b/keyboards/ergo42/rev1/config.h index f9d909cc7e..68a5e2bbe5 100644 --- a/keyboards/ergo42/rev1/config.h +++ b/keyboards/ergo42/rev1/config.h @@ -52,7 +52,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/ergodash/mini/config.h b/keyboards/ergodash/mini/config.h index cac1bba6f7..2fa51dcc12 100644 --- a/keyboards/ergodash/mini/config.h +++ b/keyboards/ergodash/mini/config.h @@ -55,7 +55,7 @@ along with this program. If not, see . #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/ergodash/rev1/config.h b/keyboards/ergodash/rev1/config.h index 5b7d856887..52f81e4ac9 100644 --- a/keyboards/ergodash/rev1/config.h +++ b/keyboards/ergodash/rev1/config.h @@ -55,7 +55,7 @@ along with this program. If not, see . #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/ergoinu/config.h b/keyboards/ergoinu/config.h index a59e5da745..dfc8a52930 100644 --- a/keyboards/ergoinu/config.h +++ b/keyboards/ergoinu/config.h @@ -57,7 +57,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ //#define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/ergotravel/rev1/config.h b/keyboards/ergotravel/rev1/config.h index 1d8a60afdd..89045666be 100644 --- a/keyboards/ergotravel/rev1/config.h +++ b/keyboards/ergotravel/rev1/config.h @@ -44,7 +44,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/espectro/config.h b/keyboards/espectro/config.h index 438530c410..2736c1d880 100755 --- a/keyboards/espectro/config.h +++ b/keyboards/espectro/config.h @@ -43,7 +43,7 @@ #define BACKLIGHT_LEVELS 5 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/evil80/config.h b/keyboards/evil80/config.h index 6bb2861464..ae507c74f9 100644 --- a/keyboards/evil80/config.h +++ b/keyboards/evil80/config.h @@ -32,7 +32,7 @@ #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/exclusive/e6v2/le/config.h b/keyboards/exclusive/e6v2/le/config.h index 580929ba8a..6477d5364a 100644 --- a/keyboards/exclusive/e6v2/le/config.h +++ b/keyboards/exclusive/e6v2/le/config.h @@ -54,6 +54,6 @@ along with this program. If not, see . #endif #define DIODE_DIRECTION COL2ROW -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #endif diff --git a/keyboards/exclusive/e6v2/oe/config.h b/keyboards/exclusive/e6v2/oe/config.h index 0bb89eba6d..9206916d34 100644 --- a/keyboards/exclusive/e6v2/oe/config.h +++ b/keyboards/exclusive/e6v2/oe/config.h @@ -54,6 +54,6 @@ along with this program. If not, see . #endif #define DIODE_DIRECTION COL2ROW -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #endif diff --git a/keyboards/exclusive/e7v1/config.h b/keyboards/exclusive/e7v1/config.h index eacb3ba312..689d7e8621 100644 --- a/keyboards/exclusive/e7v1/config.h +++ b/keyboards/exclusive/e7v1/config.h @@ -29,7 +29,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/facew/config.h b/keyboards/facew/config.h index b4fb0d4cdd..239783f8ba 100644 --- a/keyboards/facew/config.h +++ b/keyboards/facew/config.h @@ -34,7 +34,7 @@ along with this program. If not, see . #define UNUSED_PINS #define DIODE_DIRECTION COL2ROW -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #define NO_BACKLIGHT_CLOCK #define BACKLIGHT_LEVELS 1 diff --git a/keyboards/fc660c/config.h b/keyboards/fc660c/config.h index fe9c695174..e55896e6c9 100644 --- a/keyboards/fc660c/config.h +++ b/keyboards/fc660c/config.h @@ -44,7 +44,7 @@ along with this program. If not, see . // #define BACKLIGHT_PIN B7 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 0 +#define DEBOUNCE 0 #define TAPPING_TERM 175 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ diff --git a/keyboards/fc980c/config.h b/keyboards/fc980c/config.h index b46bdfd550..f9d3e06d6e 100644 --- a/keyboards/fc980c/config.h +++ b/keyboards/fc980c/config.h @@ -48,7 +48,7 @@ along with this program. If not, see . // #define BACKLIGHT_PIN B7 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 0 +#define DEBOUNCE 0 #define TAPPING_TERM 175 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ diff --git a/keyboards/felix/config.h b/keyboards/felix/config.h index 0e5dd9d2d1..0dd8eea07c 100644 --- a/keyboards/felix/config.h +++ b/keyboards/felix/config.h @@ -29,7 +29,7 @@ #define BACKLIGHT_LEVELS 5 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/fleuron/config.h b/keyboards/fleuron/config.h index 8e1d274369..0236bc3b6c 100644 --- a/keyboards/fleuron/config.h +++ b/keyboards/fleuron/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/fortitude60/matrix.c b/keyboards/fortitude60/matrix.c index 565f417d85..9037d53a64 100644 --- a/keyboards/fortitude60/matrix.c +++ b/keyboards/fortitude60/matrix.c @@ -38,11 +38,11 @@ extern backlight_config_t backlight_config; #include "serial.h" -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) static uint16_t debouncing_time; static bool debouncing = false; #endif @@ -144,7 +144,7 @@ uint8_t _matrix_scan(void) #if (DIODE_DIRECTION == COL2ROW) // Set row, read cols for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row); if (matrix_changed) { @@ -161,7 +161,7 @@ uint8_t _matrix_scan(void) #elif (DIODE_DIRECTION == ROW2COL) // Set col, read rows for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col); if (matrix_changed) { debouncing = true; @@ -174,8 +174,8 @@ uint8_t _matrix_scan(void) } #endif -# if (DEBOUNCING_DELAY > 0) - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { +# if (DEBOUNCE > 0) + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCE)) { for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { matrix[i+offset] = matrix_debouncing[i+offset]; } diff --git a/keyboards/fortitude60/rev1/config.h b/keyboards/fortitude60/rev1/config.h index 2fa179ae2e..ad4407a111 100644 --- a/keyboards/fortitude60/rev1/config.h +++ b/keyboards/fortitude60/rev1/config.h @@ -51,7 +51,7 @@ along with this program. If not, see . #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/four_banger/config.h b/keyboards/four_banger/config.h index 4567cec8e0..8e0738e6d0 100644 --- a/keyboards/four_banger/config.h +++ b/keyboards/four_banger/config.h @@ -30,7 +30,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/foxlab/leaf60/hotswap/config.h b/keyboards/foxlab/leaf60/hotswap/config.h index a471ea8e58..752b403c50 100644 --- a/keyboards/foxlab/leaf60/hotswap/config.h +++ b/keyboards/foxlab/leaf60/hotswap/config.h @@ -64,7 +64,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/foxlab/leaf60/universal/config.h b/keyboards/foxlab/leaf60/universal/config.h index d8d66ee383..f038430f93 100644 --- a/keyboards/foxlab/leaf60/universal/config.h +++ b/keyboards/foxlab/leaf60/universal/config.h @@ -64,7 +64,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/fractal/config.h b/keyboards/fractal/config.h index fce0931c21..f67f61c13f 100755 --- a/keyboards/fractal/config.h +++ b/keyboards/fractal/config.h @@ -31,7 +31,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/ft/mars80/config.h b/keyboards/ft/mars80/config.h index e03d1b3999..b56adb1146 100644 --- a/keyboards/ft/mars80/config.h +++ b/keyboards/ft/mars80/config.h @@ -36,7 +36,7 @@ along with this program. If not, see . #define UNUSED_PINS {} #define DIODE_DIRECTION COL2ROW -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #define NO_BACKLIGHT_CLOCK #define BACKLIGHT_LEVELS 1 @@ -47,4 +47,3 @@ along with this program. If not, see . /* key combination for magic key command */ /* defined by default; to change, uncomment and set to the combination you want */ // #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - diff --git a/keyboards/gh60/config.h b/keyboards/gh60/config.h index a99dd4e59b..8b7391faf1 100644 --- a/keyboards/gh60/config.h +++ b/keyboards/gh60/config.h @@ -53,7 +53,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/gh60/keymaps/dbroqua/config.h b/keyboards/gh60/keymaps/dbroqua/config.h index 380b8303f3..8952200e05 100644 --- a/keyboards/gh60/keymaps/dbroqua/config.h +++ b/keyboards/gh60/keymaps/dbroqua/config.h @@ -50,7 +50,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/gh60/keymaps/robotmaxtron/config.h b/keyboards/gh60/keymaps/robotmaxtron/config.h index ec2f8ceea0..1cc41d183b 100644 --- a/keyboards/gh60/keymaps/robotmaxtron/config.h +++ b/keyboards/gh60/keymaps/robotmaxtron/config.h @@ -53,7 +53,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/gh80_3000/config.h b/keyboards/gh80_3000/config.h index 7fb4183128..edcacc20e1 100644 --- a/keyboards/gh80_3000/config.h +++ b/keyboards/gh80_3000/config.h @@ -30,7 +30,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/gonnerd/config.h b/keyboards/gonnerd/config.h index 40615da5fc..5b22495db7 100644 --- a/keyboards/gonnerd/config.h +++ b/keyboards/gonnerd/config.h @@ -28,7 +28,7 @@ #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/gray_studio/cod67/config.h b/keyboards/gray_studio/cod67/config.h index b72f47143c..47b42d8a60 100644 --- a/keyboards/gray_studio/cod67/config.h +++ b/keyboards/gray_studio/cod67/config.h @@ -53,7 +53,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/gray_studio/space65/config.h b/keyboards/gray_studio/space65/config.h index e6d9f235d8..979cb0a604 100644 --- a/keyboards/gray_studio/space65/config.h +++ b/keyboards/gray_studio/space65/config.h @@ -80,7 +80,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/gskt00/config.h b/keyboards/gskt00/config.h index 376f89dbe8..7e1107d31f 100755 --- a/keyboards/gskt00/config.h +++ b/keyboards/gskt00/config.h @@ -23,7 +23,7 @@ #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/hadron/config.h b/keyboards/hadron/config.h index 7024f8fcbf..61e7647483 100644 --- a/keyboards/hadron/config.h +++ b/keyboards/hadron/config.h @@ -40,7 +40,7 @@ along with this program. If not, see . //#define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ //#define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/halberd/config.h b/keyboards/halberd/config.h index ab46c4d8a0..32930d7781 100644 --- a/keyboards/halberd/config.h +++ b/keyboards/halberd/config.h @@ -61,7 +61,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST @@ -228,5 +228,3 @@ along with this program. If not, see . // #define BOOTMAGIC_LITE_COLUMN 0 #define TAPPING_TERM 100 - - diff --git a/keyboards/handwired/108key_trackpoint/config.h b/keyboards/handwired/108key_trackpoint/config.h index a773a72b1a..2c0662c0b6 100644 --- a/keyboards/handwired/108key_trackpoint/config.h +++ b/keyboards/handwired/108key_trackpoint/config.h @@ -61,7 +61,7 @@ /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #define LOCKING_SUPPORT_ENABLE #define LOCKING_RESYNC_ENABLE diff --git a/keyboards/handwired/412_64/config.h b/keyboards/handwired/412_64/config.h index 9cdb3fac81..cce38f3e68 100644 --- a/keyboards/handwired/412_64/config.h +++ b/keyboards/handwired/412_64/config.h @@ -38,7 +38,7 @@ // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/arrow_pad/config.h b/keyboards/handwired/arrow_pad/config.h index 1ae3d21c44..abb600c51c 100644 --- a/keyboards/handwired/arrow_pad/config.h +++ b/keyboards/handwired/arrow_pad/config.h @@ -52,7 +52,7 @@ along with this program. If not, see . #define DIODE_DIRECTION ROW2COL /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/arrow_pad/keymaps/pad_21/config.h b/keyboards/handwired/arrow_pad/keymaps/pad_21/config.h index 9b6ecfaa36..0e471527df 100644 --- a/keyboards/handwired/arrow_pad/keymaps/pad_21/config.h +++ b/keyboards/handwired/arrow_pad/keymaps/pad_21/config.h @@ -50,7 +50,7 @@ along with this program. If not, see . #define DIODE_DIRECTION ROW2COL /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/arrow_pad/keymaps/pad_24/config.h b/keyboards/handwired/arrow_pad/keymaps/pad_24/config.h index db89e4b844..aba085f3d4 100644 --- a/keyboards/handwired/arrow_pad/keymaps/pad_24/config.h +++ b/keyboards/handwired/arrow_pad/keymaps/pad_24/config.h @@ -52,7 +52,7 @@ along with this program. If not, see . #define DIODE_DIRECTION ROW2COL /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/atreus50/config.h b/keyboards/handwired/atreus50/config.h index 4cdc7ed125..0d51e1185d 100644 --- a/keyboards/handwired/atreus50/config.h +++ b/keyboards/handwired/atreus50/config.h @@ -45,7 +45,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/cmd60/config.h b/keyboards/handwired/cmd60/config.h index e95cac1e49..ee676ca05d 100644 --- a/keyboards/handwired/cmd60/config.h +++ b/keyboards/handwired/cmd60/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/dactyl/matrix.c b/keyboards/handwired/dactyl/matrix.c index f63cf1188f..73423bfbdb 100644 --- a/keyboards/handwired/dactyl/matrix.c +++ b/keyboards/handwired/dactyl/matrix.c @@ -31,11 +31,11 @@ along with this program. If not, see . /* Set 0 if debouncing isn't needed */ -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) static uint16_t debouncing_time; static bool debouncing = false; #endif @@ -256,7 +256,7 @@ uint8_t matrix_scan(void) #if (DIODE_DIRECTION == COL2ROW) for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_cols_on_row(matrix_debouncing, current_row); if (matrix_changed) { @@ -270,7 +270,7 @@ uint8_t matrix_scan(void) #elif (DIODE_DIRECTION == ROW2COL) for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_rows_on_col(matrix_debouncing, current_col); if (matrix_changed) { @@ -284,8 +284,8 @@ uint8_t matrix_scan(void) } #endif -# if (DEBOUNCING_DELAY > 0) - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { +# if (DEBOUNCE > 0) + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCE)) { for (uint8_t i = 0; i < MATRIX_ROWS; i++) { matrix[i] = matrix_debouncing[i]; } @@ -299,7 +299,7 @@ uint8_t matrix_scan(void) bool matrix_is_modified(void) // deprecated and evidently not called. { -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) if (debouncing) return false; #endif return true; diff --git a/keyboards/handwired/dactyl_manuform/config.h b/keyboards/handwired/dactyl_manuform/config.h index 5e7605d3ab..6979821b65 100644 --- a/keyboards/handwired/dactyl_manuform/config.h +++ b/keyboards/handwired/dactyl_manuform/config.h @@ -36,7 +36,7 @@ along with this program. If not, see . #define MOUSEKEY_WHEEL_DELAY 0 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* serial.c configuration for split keyboard */ #define SOFT_SERIAL_PIN D0 diff --git a/keyboards/handwired/dactyl_promicro/config.h b/keyboards/handwired/dactyl_promicro/config.h index f81b3de519..3c0b541d1a 100644 --- a/keyboards/handwired/dactyl_promicro/config.h +++ b/keyboards/handwired/dactyl_promicro/config.h @@ -46,7 +46,7 @@ along with this program. If not, see . #define MOUSEKEY_WHEEL_DELAY 0 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* serial.c configuration for split keyboard */ #define SOFT_SERIAL_PIN D0 diff --git a/keyboards/handwired/daishi/config.h b/keyboards/handwired/daishi/config.h index 020b486a98..15ff6a6a62 100644 --- a/keyboards/handwired/daishi/config.h +++ b/keyboards/handwired/daishi/config.h @@ -49,7 +49,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Set up rotary encoder */ #define NUMBER_OF_ENCODERS 1 diff --git a/keyboards/handwired/datahand/config.h b/keyboards/handwired/datahand/config.h index a269775f35..c7a0a43def 100644 --- a/keyboards/handwired/datahand/config.h +++ b/keyboards/handwired/datahand/config.h @@ -33,7 +33,7 @@ //#define DIODE_DIRECTION /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 0 +#define DEBOUNCE 0 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/downbubble/config.h b/keyboards/handwired/downbubble/config.h index 4b2bd92e4d..f2628cb706 100644 --- a/keyboards/handwired/downbubble/config.h +++ b/keyboards/handwired/downbubble/config.h @@ -80,7 +80,7 @@ along with this program. If not, see . // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/fivethirteen/config.h b/keyboards/handwired/fivethirteen/config.h index 685d421b12..9511222974 100644 --- a/keyboards/handwired/fivethirteen/config.h +++ b/keyboards/handwired/fivethirteen/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/gamenum/config.h b/keyboards/handwired/gamenum/config.h index 180b1b01ae..ff60aa5293 100644 --- a/keyboards/handwired/gamenum/config.h +++ b/keyboards/handwired/gamenum/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/hacked_motospeed/config.h b/keyboards/handwired/hacked_motospeed/config.h index 59300e0d27..1a341c0f4e 100644 --- a/keyboards/handwired/hacked_motospeed/config.h +++ b/keyboards/handwired/hacked_motospeed/config.h @@ -84,7 +84,7 @@ along with this program. If not, see . // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ #define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/hexon38/config.h b/keyboards/handwired/hexon38/config.h index 5453eda543..e9e1eb4d29 100644 --- a/keyboards/handwired/hexon38/config.h +++ b/keyboards/handwired/hexon38/config.h @@ -31,7 +31,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #ifdef RGB_DI_PIN #define RGBLIGHT_ANIMATIONS diff --git a/keyboards/handwired/ibm122m/config.h b/keyboards/handwired/ibm122m/config.h index 1ef7be78de..8189f704d7 100644 --- a/keyboards/handwired/ibm122m/config.h +++ b/keyboards/handwired/ibm122m/config.h @@ -53,7 +53,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 15 +#define DEBOUNCE 15 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/jn68m/config.h b/keyboards/handwired/jn68m/config.h index f6ab4056ba..ef0c09cf14 100644 --- a/keyboards/handwired/jn68m/config.h +++ b/keyboards/handwired/jn68m/config.h @@ -40,7 +40,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/jot50/config.h b/keyboards/handwired/jot50/config.h index 2dfcfd2d28..2d2c1c1830 100644 --- a/keyboards/handwired/jot50/config.h +++ b/keyboards/handwired/jot50/config.h @@ -29,7 +29,7 @@ #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/jotanck/config.h b/keyboards/handwired/jotanck/config.h index cbbd6ea96e..925464825b 100644 --- a/keyboards/handwired/jotanck/config.h +++ b/keyboards/handwired/jotanck/config.h @@ -28,7 +28,7 @@ #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/jotpad16/config.h b/keyboards/handwired/jotpad16/config.h index e113597dc2..075f9649c7 100644 --- a/keyboards/handwired/jotpad16/config.h +++ b/keyboards/handwired/jotpad16/config.h @@ -28,11 +28,10 @@ #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 0 +#define DEBOUNCE 0 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - diff --git a/keyboards/handwired/kbod/config.h b/keyboards/handwired/kbod/config.h index 5f02c71721..f0bba68a55 100644 --- a/keyboards/handwired/kbod/config.h +++ b/keyboards/handwired/kbod/config.h @@ -53,7 +53,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/maartenwut/config.h b/keyboards/handwired/maartenwut/config.h index b939fa1f62..d059c6e4ab 100755 --- a/keyboards/handwired/maartenwut/config.h +++ b/keyboards/handwired/maartenwut/config.h @@ -32,7 +32,7 @@ #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #define QMK_ESC_OUTPUT C6 // usually COL #define QMK_ESC_INPUT D0 // usually ROW diff --git a/keyboards/handwired/magicforce61/config.h b/keyboards/handwired/magicforce61/config.h index 3dc74f83e7..446f4aefca 100644 --- a/keyboards/handwired/magicforce61/config.h +++ b/keyboards/handwired/magicforce61/config.h @@ -53,7 +53,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/magicforce68/config.h b/keyboards/handwired/magicforce68/config.h index dc0a82c94a..1cb7e91b41 100644 --- a/keyboards/handwired/magicforce68/config.h +++ b/keyboards/handwired/magicforce68/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/mechboards_micropad/config.h b/keyboards/handwired/mechboards_micropad/config.h index 01a0bdd909..8f237a64a1 100644 --- a/keyboards/handwired/mechboards_micropad/config.h +++ b/keyboards/handwired/mechboards_micropad/config.h @@ -80,7 +80,7 @@ along with this program. If not, see . // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/minorca/config.h b/keyboards/handwired/minorca/config.h index c30d54db70..fea201b9cf 100644 --- a/keyboards/handwired/minorca/config.h +++ b/keyboards/handwired/minorca/config.h @@ -47,7 +47,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/ms_sculpt_mobile/config.h b/keyboards/handwired/ms_sculpt_mobile/config.h index 6739b44fcf..0b1d3e6b3b 100644 --- a/keyboards/handwired/ms_sculpt_mobile/config.h +++ b/keyboards/handwired/ms_sculpt_mobile/config.h @@ -52,7 +52,7 @@ along with this program. If not, see . #define DIODE_DIRECTION ROW2COL /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/not_so_minidox/config.h b/keyboards/handwired/not_so_minidox/config.h index fc6068628d..e92621af41 100644 --- a/keyboards/handwired/not_so_minidox/config.h +++ b/keyboards/handwired/not_so_minidox/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/numbrero/config.h b/keyboards/handwired/numbrero/config.h index bb178bd225..ac38e08145 100644 --- a/keyboards/handwired/numbrero/config.h +++ b/keyboards/handwired/numbrero/config.h @@ -29,7 +29,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/numpad20/config.h b/keyboards/handwired/numpad20/config.h index c597494c41..78d95965a7 100644 --- a/keyboards/handwired/numpad20/config.h +++ b/keyboards/handwired/numpad20/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/ortho5x13/config.h b/keyboards/handwired/ortho5x13/config.h index 1e2128b650..b3850a48a4 100644 --- a/keyboards/handwired/ortho5x13/config.h +++ b/keyboards/handwired/ortho5x13/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/pilcrow/config.h b/keyboards/handwired/pilcrow/config.h index 8f562de3b5..439686ae62 100644 --- a/keyboards/handwired/pilcrow/config.h +++ b/keyboards/handwired/pilcrow/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/prime_exl/config.h b/keyboards/handwired/prime_exl/config.h index 3201a8247a..a2962c0746 100644 --- a/keyboards/handwired/prime_exl/config.h +++ b/keyboards/handwired/prime_exl/config.h @@ -43,7 +43,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 5 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/promethium/config.h b/keyboards/handwired/promethium/config.h index b5a0a7f4ba..f05273d254 100644 --- a/keyboards/handwired/promethium/config.h +++ b/keyboards/handwired/promethium/config.h @@ -60,7 +60,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/promethium/matrix.c b/keyboards/handwired/promethium/matrix.c index 0b4456e289..3b8e5af820 100644 --- a/keyboards/handwired/promethium/matrix.c +++ b/keyboards/handwired/promethium/matrix.c @@ -31,11 +31,11 @@ along with this program. If not, see . /* Set 0 if debouncing isn't needed */ -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) static uint16_t debouncing_time; static bool debouncing = false; #endif @@ -128,7 +128,7 @@ uint8_t matrix_scan(void) { // Set row, read cols for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_cols_on_row(matrix_debouncing, current_row); if (matrix_changed) { @@ -142,8 +142,8 @@ uint8_t matrix_scan(void) } -# if (DEBOUNCING_DELAY > 0) - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { +# if (DEBOUNCE > 0) + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCE)) { for (uint8_t i = 0; i < MATRIX_ROWS; i++) { matrix[i] = matrix_debouncing[i]; } @@ -157,7 +157,7 @@ uint8_t matrix_scan(void) bool matrix_is_modified(void) { -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) if (debouncing) return false; #endif return true; @@ -294,4 +294,3 @@ static void unselect_row(uint8_t row) static void unselect_rows(void) { } - diff --git a/keyboards/handwired/pteron/config.h b/keyboards/handwired/pteron/config.h index d0b074c681..56921b020d 100644 --- a/keyboards/handwired/pteron/config.h +++ b/keyboards/handwired/pteron/config.h @@ -23,7 +23,7 @@ #define DIODE_DIRECTION ROW2COL /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 // 5 is default +#define DEBOUNCE 5 // 5 is default /* prevent stuck modifiers */ #define PREVENT_STUCK_MODIFIERS diff --git a/keyboards/handwired/qc60/config.h b/keyboards/handwired/qc60/config.h index aad1d64a03..0c8f8f0079 100644 --- a/keyboards/handwired/qc60/config.h +++ b/keyboards/handwired/qc60/config.h @@ -16,7 +16,7 @@ #define MATRIX_COLS 8 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* serial.c configuration for split keyboard */ #define SOFT_SERIAL_PIN D0 diff --git a/keyboards/handwired/reddot/config.h b/keyboards/handwired/reddot/config.h index 82fe01863d..4d908041b1 100755 --- a/keyboards/handwired/reddot/config.h +++ b/keyboards/handwired/reddot/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/retro_refit/config.h b/keyboards/handwired/retro_refit/config.h index 34def3815a..1d4f1e075f 100644 --- a/keyboards/handwired/retro_refit/config.h +++ b/keyboards/handwired/retro_refit/config.h @@ -47,7 +47,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 0 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/space_oddity/config.h b/keyboards/handwired/space_oddity/config.h index 8322164232..09975cfc8f 100644 --- a/keyboards/handwired/space_oddity/config.h +++ b/keyboards/handwired/space_oddity/config.h @@ -35,7 +35,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/splittest/config.h b/keyboards/handwired/splittest/config.h index 9e4fb38ca0..a502d12382 100644 --- a/keyboards/handwired/splittest/config.h +++ b/keyboards/handwired/splittest/config.h @@ -43,7 +43,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/tennie/config.h b/keyboards/handwired/tennie/config.h index b50886cdc8..20795b048c 100644 --- a/keyboards/handwired/tennie/config.h +++ b/keyboards/handwired/tennie/config.h @@ -80,7 +80,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/terminus_mini/config.h b/keyboards/handwired/terminus_mini/config.h index e1b5daccd7..a5a6736ba0 100644 --- a/keyboards/handwired/terminus_mini/config.h +++ b/keyboards/handwired/terminus_mini/config.h @@ -60,7 +60,7 @@ along with this program. If not, see . #define TAPPING_TERM 150 //reduce time required to register a held key /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/trackpoint/config.h b/keyboards/handwired/trackpoint/config.h index cecb6a5094..a1c12efb07 100644 --- a/keyboards/handwired/trackpoint/config.h +++ b/keyboards/handwired/trackpoint/config.h @@ -61,7 +61,7 @@ /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #define LOCKING_SUPPORT_ENABLE #define LOCKING_RESYNC_ENABLE diff --git a/keyboards/handwired/tradestation/config.h b/keyboards/handwired/tradestation/config.h index 22650d2f1a..33c87548fb 100644 --- a/keyboards/handwired/tradestation/config.h +++ b/keyboards/handwired/tradestation/config.h @@ -29,7 +29,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/traveller/config.h b/keyboards/handwired/traveller/config.h index ccf214736d..3812ec61f3 100644 --- a/keyboards/handwired/traveller/config.h +++ b/keyboards/handwired/traveller/config.h @@ -63,7 +63,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/woodpad/config.h b/keyboards/handwired/woodpad/config.h index 77be4a0d9f..d08c47387f 100644 --- a/keyboards/handwired/woodpad/config.h +++ b/keyboards/handwired/woodpad/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/xealous/rev1/config.h b/keyboards/handwired/xealous/rev1/config.h index f58c8f90b8..ab39dfbc1d 100644 --- a/keyboards/handwired/xealous/rev1/config.h +++ b/keyboards/handwired/xealous/rev1/config.h @@ -62,7 +62,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* * Feature disable options diff --git a/keyboards/hecomi/alpha/config.h b/keyboards/hecomi/alpha/config.h index 8a65f146b0..dbc94454f9 100644 --- a/keyboards/hecomi/alpha/config.h +++ b/keyboards/hecomi/alpha/config.h @@ -79,7 +79,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/helix/pico/config.h b/keyboards/helix/pico/config.h index 343cecd59d..b377332efa 100644 --- a/keyboards/helix/pico/config.h +++ b/keyboards/helix/pico/config.h @@ -63,7 +63,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ //#define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/helix/rev1/config.h b/keyboards/helix/rev1/config.h index 22e61acc75..454e8ee628 100644 --- a/keyboards/helix/rev1/config.h +++ b/keyboards/helix/rev1/config.h @@ -60,7 +60,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/helix/rev2/config.h b/keyboards/helix/rev2/config.h index 2dc2fb8dd8..ec74458594 100644 --- a/keyboards/helix/rev2/config.h +++ b/keyboards/helix/rev2/config.h @@ -72,7 +72,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ //#define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/hid_liber/config.h b/keyboards/hid_liber/config.h index 4519d8628e..c21307e1a2 100755 --- a/keyboards/hid_liber/config.h +++ b/keyboards/hid_liber/config.h @@ -45,7 +45,7 @@ //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/hifumi/config.h b/keyboards/hifumi/config.h index dccb0352df..b4f192a7a7 100644 --- a/keyboards/hifumi/config.h +++ b/keyboards/hifumi/config.h @@ -46,7 +46,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* ws2812 RGB LED */ #define RGB_DI_PIN D3 diff --git a/keyboards/hineybush/h87a/config.h b/keyboards/hineybush/h87a/config.h index 2e6c37e33f..245e6eda83 100644 --- a/keyboards/hineybush/h87a/config.h +++ b/keyboards/hineybush/h87a/config.h @@ -53,7 +53,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/hineybush/hineyg80/config.h b/keyboards/hineybush/hineyg80/config.h index 7e75c62b34..4072def2fb 100644 --- a/keyboards/hineybush/hineyg80/config.h +++ b/keyboards/hineybush/hineyg80/config.h @@ -29,7 +29,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE @@ -44,4 +44,3 @@ #define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_VAL_STEP 8 #endif - diff --git a/keyboards/hs60/v1/config.h b/keyboards/hs60/v1/config.h index ee546f3f16..762ab319fd 100644 --- a/keyboards/hs60/v1/config.h +++ b/keyboards/hs60/v1/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/hs60/v1/v1.c b/keyboards/hs60/v1/v1.c index 5267c94576..70c1c2128e 100644 --- a/keyboards/hs60/v1/v1.c +++ b/keyboards/hs60/v1/v1.c @@ -315,7 +315,7 @@ void bootmagic_lite(void) // We need multiple scans because debouncing can't be turned off. matrix_scan(); - wait_ms(DEBOUNCING_DELAY); + wait_ms(DEBOUNCE); matrix_scan(); // If the Esc and space bar are held down on power up, diff --git a/keyboards/hs60/v2/config.h b/keyboards/hs60/v2/config.h index 05255d1331..7169d846ba 100644 --- a/keyboards/hs60/v2/config.h +++ b/keyboards/hs60/v2/config.h @@ -39,7 +39,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/idobo/config.h b/keyboards/idobo/config.h index 122180780e..e1c08afae1 100644 --- a/keyboards/idobo/config.h +++ b/keyboards/idobo/config.h @@ -62,7 +62,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/jc65/v32u4/config.h b/keyboards/jc65/v32u4/config.h index 98256b1281..8233dd1e8c 100644 --- a/keyboards/jc65/v32u4/config.h +++ b/keyboards/jc65/v32u4/config.h @@ -52,6 +52,6 @@ along with this program. If not, see . #endif #define DIODE_DIRECTION COL2ROW -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #endif diff --git a/keyboards/jd40/config.h b/keyboards/jd40/config.h index 70648d2f53..c03bb3aecf 100644 --- a/keyboards/jd40/config.h +++ b/keyboards/jd40/config.h @@ -50,7 +50,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/jd45/config.h b/keyboards/jd45/config.h index d3137b9f4b..02968b44e4 100644 --- a/keyboards/jd45/config.h +++ b/keyboards/jd45/config.h @@ -49,7 +49,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/jd45/keymaps/mjt/config.h b/keyboards/jd45/keymaps/mjt/config.h index 5507caae5d..da1adc9af6 100644 --- a/keyboards/jd45/keymaps/mjt/config.h +++ b/keyboards/jd45/keymaps/mjt/config.h @@ -52,7 +52,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/jj40/config.h b/keyboards/jj40/config.h index e88147ac85..c068685a4a 100644 --- a/keyboards/jj40/config.h +++ b/keyboards/jj40/config.h @@ -42,7 +42,7 @@ along with this program. If not, see . #define RGBLIGHT_ANIMATIONS /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #define NO_UART 1 diff --git a/keyboards/jj4x4/config.h b/keyboards/jj4x4/config.h index a8df46f016..80fa07d3bb 100644 --- a/keyboards/jj4x4/config.h +++ b/keyboards/jj4x4/config.h @@ -45,7 +45,7 @@ along with this program. If not, see . #define RGBLIGHT_ANIMATIONS /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #define NO_UART 1 diff --git a/keyboards/kagamidget/config.h b/keyboards/kagamidget/config.h index fc9463aee0..00e09530e1 100644 --- a/keyboards/kagamidget/config.h +++ b/keyboards/kagamidget/config.h @@ -57,7 +57,7 @@ along with this program. If not, see . #define RGBLIGHT_VAL_STEP 8 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/katana60/config.h b/keyboards/katana60/config.h index eb67c0b214..3385ddb9cb 100644 --- a/keyboards/katana60/config.h +++ b/keyboards/katana60/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/kbdfans/kbd19x/config.h b/keyboards/kbdfans/kbd19x/config.h index 9c5f2ba38e..d722dc2615 100644 --- a/keyboards/kbdfans/kbd19x/config.h +++ b/keyboards/kbdfans/kbd19x/config.h @@ -62,7 +62,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/kbdfans/kbd4x/config.h b/keyboards/kbdfans/kbd4x/config.h index c99fcc73fa..07bc4b9901 100644 --- a/keyboards/kbdfans/kbd4x/config.h +++ b/keyboards/kbdfans/kbd4x/config.h @@ -62,7 +62,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/kbdfans/kbd66/config.h b/keyboards/kbdfans/kbd66/config.h index 730df13077..a2666a6197 100644 --- a/keyboards/kbdfans/kbd66/config.h +++ b/keyboards/kbdfans/kbd66/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . #define BREATHING_PERIOD 6 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST @@ -180,4 +180,3 @@ along with this program. If not, see . /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 1 - diff --git a/keyboards/kbdfans/kbd67/hotswap/config.h b/keyboards/kbdfans/kbd67/hotswap/config.h index 8822b213e3..fca9916ed9 100644 --- a/keyboards/kbdfans/kbd67/hotswap/config.h +++ b/keyboards/kbdfans/kbd67/hotswap/config.h @@ -80,7 +80,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/kbdfans/kbd67/rev1/config.h b/keyboards/kbdfans/kbd67/rev1/config.h index a98687569c..7a26192f4a 100644 --- a/keyboards/kbdfans/kbd67/rev1/config.h +++ b/keyboards/kbdfans/kbd67/rev1/config.h @@ -75,7 +75,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/kbdfans/kbd67/rev2/config.h b/keyboards/kbdfans/kbd67/rev2/config.h index 1c8385f7d5..97945eec86 100644 --- a/keyboards/kbdfans/kbd67/rev2/config.h +++ b/keyboards/kbdfans/kbd67/rev2/config.h @@ -45,7 +45,7 @@ along with this program. If not, see . #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/kbdfans/kbd6x/config.h b/keyboards/kbdfans/kbd6x/config.h index d3f1ee82cd..1ee31e5690 100644 --- a/keyboards/kbdfans/kbd6x/config.h +++ b/keyboards/kbdfans/kbd6x/config.h @@ -62,7 +62,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/kbdfans/kbd75/config.h b/keyboards/kbdfans/kbd75/config.h index 6f0cd86de3..611e682e54 100644 --- a/keyboards/kbdfans/kbd75/config.h +++ b/keyboards/kbdfans/kbd75/config.h @@ -30,7 +30,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/kbdfans/kbd8x/config.h b/keyboards/kbdfans/kbd8x/config.h index 2cae296267..bdd3104407 100644 --- a/keyboards/kbdfans/kbd8x/config.h +++ b/keyboards/kbdfans/kbd8x/config.h @@ -62,7 +62,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/kc60/config.h b/keyboards/kc60/config.h index 5c002f9b3f..7e9cdaa086 100644 --- a/keyboards/kc60/config.h +++ b/keyboards/kc60/config.h @@ -56,7 +56,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/kc60se/config.h b/keyboards/kc60se/config.h index 66a4aa0cbe..5fffe61145 100644 --- a/keyboards/kc60se/config.h +++ b/keyboards/kc60se/config.h @@ -47,7 +47,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 6 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/keebio/bdn9/config.h b/keyboards/keebio/bdn9/config.h index 1637ce45f1..19e625348d 100644 --- a/keyboards/keebio/bdn9/config.h +++ b/keyboards/keebio/bdn9/config.h @@ -60,7 +60,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/keebio/bfo9000/config.h b/keyboards/keebio/bfo9000/config.h index c5afb265f3..b45ec9c2fa 100644 --- a/keyboards/keebio/bfo9000/config.h +++ b/keyboards/keebio/bfo9000/config.h @@ -38,7 +38,7 @@ along with this program. If not, see . #define MATRIX_COL_PINS { B5, B6, B2, B3, B1, F7, F6, F5, F4 } /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/keebio/chocopad/config.h b/keyboards/keebio/chocopad/config.h index fb00ae70ac..d8831556cf 100644 --- a/keyboards/keebio/chocopad/config.h +++ b/keyboards/keebio/chocopad/config.h @@ -27,7 +27,7 @@ #define BACKLIGHT_LEVELS 6 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/keebio/dilly/config.h b/keyboards/keebio/dilly/config.h index 1489ec3029..e4d17df474 100644 --- a/keyboards/keebio/dilly/config.h +++ b/keyboards/keebio/dilly/config.h @@ -30,7 +30,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/keebio/fourier/config.h b/keyboards/keebio/fourier/config.h index 70967a13f6..9ddc53a0c8 100644 --- a/keyboards/keebio/fourier/config.h +++ b/keyboards/keebio/fourier/config.h @@ -52,7 +52,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/keebio/levinson/rev1/config.h b/keyboards/keebio/levinson/rev1/config.h index eec95f7278..52cf7baf7a 100644 --- a/keyboards/keebio/levinson/rev1/config.h +++ b/keyboards/keebio/levinson/rev1/config.h @@ -39,7 +39,7 @@ along with this program. If not, see . #define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 } /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* serial.c configuration for split keyboard */ #define SOFT_SERIAL_PIN D0 diff --git a/keyboards/keebio/levinson/rev2/config.h b/keyboards/keebio/levinson/rev2/config.h index a9fe895866..1365ae792c 100644 --- a/keyboards/keebio/levinson/rev2/config.h +++ b/keyboards/keebio/levinson/rev2/config.h @@ -39,7 +39,7 @@ along with this program. If not, see . #define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 } /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* serial.c configuration for split keyboard */ #define SOFT_SERIAL_PIN D0 diff --git a/keyboards/keebio/nyquist/rev1/config.h b/keyboards/keebio/nyquist/rev1/config.h index 98381aca74..75fa43b587 100644 --- a/keyboards/keebio/nyquist/rev1/config.h +++ b/keyboards/keebio/nyquist/rev1/config.h @@ -44,7 +44,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* serial.c configuration for split keyboard */ #define SOFT_SERIAL_PIN D0 diff --git a/keyboards/keebio/nyquist/rev2/config.h b/keyboards/keebio/nyquist/rev2/config.h index 52c50694bf..9775113c63 100644 --- a/keyboards/keebio/nyquist/rev2/config.h +++ b/keyboards/keebio/nyquist/rev2/config.h @@ -41,7 +41,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* serial.c configuration for split keyboard */ #define SOFT_SERIAL_PIN D0 diff --git a/keyboards/keebio/nyquist/rev3/config.h b/keyboards/keebio/nyquist/rev3/config.h index 3c7822def0..b2573d1dc3 100644 --- a/keyboards/keebio/nyquist/rev3/config.h +++ b/keyboards/keebio/nyquist/rev3/config.h @@ -42,7 +42,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* serial.c configuration for split keyboard */ #define SOFT_SERIAL_PIN D0 diff --git a/keyboards/keebio/quefrency/rev1/config.h b/keyboards/keebio/quefrency/rev1/config.h index 67cef6195b..9778ef4709 100644 --- a/keyboards/keebio/quefrency/rev1/config.h +++ b/keyboards/keebio/quefrency/rev1/config.h @@ -41,7 +41,7 @@ along with this program. If not, see . #define SPLIT_HAND_PIN D2 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* serial.c configuration for split keyboard */ #define SOFT_SERIAL_PIN D0 diff --git a/keyboards/keebio/rorschach/rev1/config.h b/keyboards/keebio/rorschach/rev1/config.h index 13402544f8..bcfce2bee8 100644 --- a/keyboards/keebio/rorschach/rev1/config.h +++ b/keyboards/keebio/rorschach/rev1/config.h @@ -40,7 +40,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* serial.c configuration for split keyboard */ #define SOFT_SERIAL_PIN D0 diff --git a/keyboards/keebio/tragicforce68/config.h b/keyboards/keebio/tragicforce68/config.h index b415b5d714..4a1b6378c5 100644 --- a/keyboards/keebio/tragicforce68/config.h +++ b/keyboards/keebio/tragicforce68/config.h @@ -53,7 +53,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 7 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/keebio/viterbi/rev1/config.h b/keyboards/keebio/viterbi/rev1/config.h index e6fc13abda..12a61448d1 100644 --- a/keyboards/keebio/viterbi/rev1/config.h +++ b/keyboards/keebio/viterbi/rev1/config.h @@ -41,7 +41,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/keebio/viterbi/rev2/config.h b/keyboards/keebio/viterbi/rev2/config.h index b2970610e2..0b78604d8f 100644 --- a/keyboards/keebio/viterbi/rev2/config.h +++ b/keyboards/keebio/viterbi/rev2/config.h @@ -40,7 +40,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/keebio/wavelet/config.h b/keyboards/keebio/wavelet/config.h index 5610bba17b..6f67fdbaf5 100644 --- a/keyboards/keebio/wavelet/config.h +++ b/keyboards/keebio/wavelet/config.h @@ -38,7 +38,7 @@ along with this program. If not, see . #define MATRIX_COL_PINS { F6, B1, B2, B6, B4, E6 } /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/keycapsss/o4l_5x12/config.h b/keyboards/keycapsss/o4l_5x12/config.h index b53e372d0e..67bde35cf2 100644 --- a/keyboards/keycapsss/o4l_5x12/config.h +++ b/keyboards/keycapsss/o4l_5x12/config.h @@ -34,7 +34,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/kinesis/config.h b/keyboards/kinesis/config.h index 74e85f6f1b..368037d8b2 100644 --- a/keyboards/kinesis/config.h +++ b/keyboards/kinesis/config.h @@ -36,7 +36,7 @@ along with this program. If not, see . #define MOUSEKEY_WHEEL_TIME_TO_MAX 1 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/kinesis/stapelberg/config.h b/keyboards/kinesis/stapelberg/config.h index 321aec5eb2..992480195f 100644 --- a/keyboards/kinesis/stapelberg/config.h +++ b/keyboards/kinesis/stapelberg/config.h @@ -30,7 +30,7 @@ /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* don't know if this should be defined at the board or top level. Assuming board #define MOUSEKEY_DELAY 100 diff --git a/keyboards/kira75/config.h b/keyboards/kira75/config.h index 4f98c1df8a..15be87d26b 100644 --- a/keyboards/kira75/config.h +++ b/keyboards/kira75/config.h @@ -61,7 +61,7 @@ along with this program. If not, see . #define RGBLIGHT_VAL_STEP 8 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/kmac/config.h b/keyboards/kmac/config.h index bea6821731..110a7ac0f9 100644 --- a/keyboards/kmac/config.h +++ b/keyboards/kmac/config.h @@ -50,7 +50,7 @@ along with this program. If not, see . // #define BACKLIGHT_BREATHING /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/kmac/matrix.c b/keyboards/kmac/matrix.c index 82f0621f2b..00da96604d 100644 --- a/keyboards/kmac/matrix.c +++ b/keyboards/kmac/matrix.c @@ -28,8 +28,8 @@ along with this program. If not, see . /* Set 0 if debouncing isn't needed */ -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif #define COL_SHIFTER ((uint32_t)1) @@ -83,7 +83,7 @@ uint8_t matrix_scan(void) } } - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCE)) { for (uint8_t i = 0; i < MATRIX_ROWS; i++) { matrix[i] = matrix_debouncing[i]; } diff --git a/keyboards/kmini/config.h b/keyboards/kmini/config.h index 7a795d49df..b5460c9dea 100755 --- a/keyboards/kmini/config.h +++ b/keyboards/kmini/config.h @@ -48,6 +48,6 @@ // #define BACKLIGHT_BREATHING /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #endif diff --git a/keyboards/kmini/matrix.c b/keyboards/kmini/matrix.c index 69135909a5..9888f1a765 100755 --- a/keyboards/kmini/matrix.c +++ b/keyboards/kmini/matrix.c @@ -27,8 +27,8 @@ /* Set 0 if debouncing isn't needed */ -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif #define COL_SHIFTER ((uint32_t)1) @@ -98,7 +98,7 @@ uint8_t matrix_scan(void) } } - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCE)) { for (uint8_t i = 0; i < MATRIX_ROWS; i++) { matrix[i] = matrix_debouncing[i]; } diff --git a/keyboards/knops/mini/config.h b/keyboards/knops/mini/config.h index 3129141276..01a5f44baf 100644 --- a/keyboards/knops/mini/config.h +++ b/keyboards/knops/mini/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/kona_classic/config.h b/keyboards/kona_classic/config.h index 819a7475a0..affd572b79 100644 --- a/keyboards/kona_classic/config.h +++ b/keyboards/kona_classic/config.h @@ -61,7 +61,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/laptreus/config.h b/keyboards/laptreus/config.h index de6b7ce94d..675d7b0079 100644 --- a/keyboards/laptreus/config.h +++ b/keyboards/laptreus/config.h @@ -46,7 +46,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/launchpad/config.h b/keyboards/launchpad/config.h index 4023a22015..d93fe65d2d 100644 --- a/keyboards/launchpad/config.h +++ b/keyboards/launchpad/config.h @@ -38,7 +38,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/lazydesigners/dimple/config.h b/keyboards/lazydesigners/dimple/config.h index 0f7a8798eb..9814d1050c 100644 --- a/keyboards/lazydesigners/dimple/config.h +++ b/keyboards/lazydesigners/dimple/config.h @@ -40,7 +40,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/lazydesigners/the50/config.h b/keyboards/lazydesigners/the50/config.h index d1ddbfea40..72246eabac 100644 --- a/keyboards/lazydesigners/the50/config.h +++ b/keyboards/lazydesigners/the50/config.h @@ -29,7 +29,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/lazydesigners/the60/config.h b/keyboards/lazydesigners/the60/config.h index a767d1dc8a..d6bd2205c6 100644 --- a/keyboards/lazydesigners/the60/config.h +++ b/keyboards/lazydesigners/the60/config.h @@ -29,7 +29,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/lets_split/rev1/config.h b/keyboards/lets_split/rev1/config.h index e9dc0a5346..c6e7f6479e 100644 --- a/keyboards/lets_split/rev1/config.h +++ b/keyboards/lets_split/rev1/config.h @@ -43,7 +43,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* serial.c configuration for split keyboard */ #define SOFT_SERIAL_PIN D0 diff --git a/keyboards/lets_split/rev2/config.h b/keyboards/lets_split/rev2/config.h index e310269658..2481ce0413 100644 --- a/keyboards/lets_split/rev2/config.h +++ b/keyboards/lets_split/rev2/config.h @@ -43,7 +43,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* serial.c configuration for split keyboard */ #define SOFT_SERIAL_PIN D0 diff --git a/keyboards/lets_split/sockets/config.h b/keyboards/lets_split/sockets/config.h index 9c6367f533..2d3e68610e 100644 --- a/keyboards/lets_split/sockets/config.h +++ b/keyboards/lets_split/sockets/config.h @@ -43,7 +43,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* serial.c configuration for split keyboard */ #define SOFT_SERIAL_PIN D0 diff --git a/keyboards/lets_split_eh/config.h b/keyboards/lets_split_eh/config.h index c227326c09..655d35e1ab 100644 --- a/keyboards/lets_split_eh/config.h +++ b/keyboards/lets_split_eh/config.h @@ -34,7 +34,7 @@ along with this program. If not, see . #define MATRIX_COLS 6 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* serial.c configuration for split keyboard */ //#define SOFT_SERIAL_PIN D0 diff --git a/keyboards/lfkeyboards/lfk65_hs/config.h b/keyboards/lfkeyboards/lfk65_hs/config.h index 73e906c3b3..f448419d4b 100644 --- a/keyboards/lfkeyboards/lfk65_hs/config.h +++ b/keyboards/lfkeyboards/lfk65_hs/config.h @@ -34,7 +34,7 @@ #define RGBLIGHT_VAL_STEP 17 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/lfkeyboards/lfk78/config.h b/keyboards/lfkeyboards/lfk78/config.h index 30919894c1..44b55b50e0 100644 --- a/keyboards/lfkeyboards/lfk78/config.h +++ b/keyboards/lfkeyboards/lfk78/config.h @@ -65,7 +65,7 @@ along with this program. If not, see . #define TAPPING_TERM 200 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/lfkeyboards/lfk87/config.h b/keyboards/lfkeyboards/lfk87/config.h index 00df429774..00df4e9113 100644 --- a/keyboards/lfkeyboards/lfk87/config.h +++ b/keyboards/lfkeyboards/lfk87/config.h @@ -65,7 +65,7 @@ along with this program. If not, see . #define TAPPING_TERM 200 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/lfkeyboards/lfkpad/config.h b/keyboards/lfkeyboards/lfkpad/config.h index ea29e84a4e..1d8de837da 100644 --- a/keyboards/lfkeyboards/lfkpad/config.h +++ b/keyboards/lfkeyboards/lfkpad/config.h @@ -44,7 +44,7 @@ along with this program. If not, see . #define TAPPING_TERM 200 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/lfkeyboards/mini1800/config.h b/keyboards/lfkeyboards/mini1800/config.h index e4d197aa2d..214f5f45ab 100644 --- a/keyboards/lfkeyboards/mini1800/config.h +++ b/keyboards/lfkeyboards/mini1800/config.h @@ -52,7 +52,7 @@ along with this program. If not, see . #define TAPPING_TERM 200 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/lfkeyboards/smk65/config.h b/keyboards/lfkeyboards/smk65/config.h index ddc7c5165a..deca087bc2 100644 --- a/keyboards/lfkeyboards/smk65/config.h +++ b/keyboards/lfkeyboards/smk65/config.h @@ -61,7 +61,7 @@ along with this program. If not, see . #define RGBLIGHT_VAL_STEP 17 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/lily58/matrix.c b/keyboards/lily58/matrix.c index fc42dd14d9..328d16c77b 100644 --- a/keyboards/lily58/matrix.c +++ b/keyboards/lily58/matrix.c @@ -37,11 +37,11 @@ along with this program. If not, see . # include "serial.h" #endif -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) static uint16_t debouncing_time; static bool debouncing = false; #endif @@ -145,7 +145,7 @@ uint8_t _matrix_scan(void) #if (DIODE_DIRECTION == COL2ROW) // Set row, read cols for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row); if (matrix_changed) { @@ -162,7 +162,7 @@ uint8_t _matrix_scan(void) #elif (DIODE_DIRECTION == ROW2COL) // Set col, read rows for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col); if (matrix_changed) { debouncing = true; @@ -175,8 +175,8 @@ uint8_t _matrix_scan(void) } #endif -# if (DEBOUNCING_DELAY > 0) - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { +# if (DEBOUNCE > 0) + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCE)) { for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { matrix[i+offset] = matrix_debouncing[i+offset]; } diff --git a/keyboards/lily58/rev1/config.h b/keyboards/lily58/rev1/config.h index 7a4386e707..8fd42070e0 100644 --- a/keyboards/lily58/rev1/config.h +++ b/keyboards/lily58/rev1/config.h @@ -45,7 +45,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ //#define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/m0lly/config.h b/keyboards/m0lly/config.h index 21f5fd3fb4..010833ac80 100644 --- a/keyboards/m0lly/config.h +++ b/keyboards/m0lly/config.h @@ -60,7 +60,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/m10a/config.h b/keyboards/m10a/config.h index ec425dfbd4..f2e6e45e73 100644 --- a/keyboards/m10a/config.h +++ b/keyboards/m10a/config.h @@ -49,7 +49,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 6 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/massdrop/alt/config.h b/keyboards/massdrop/alt/config.h index 59e66e1330..d8389fc009 100644 --- a/keyboards/massdrop/alt/config.h +++ b/keyboards/massdrop/alt/config.h @@ -92,7 +92,7 @@ along with this program. If not, see . #define DEBUG_BOOT_TRACING_PIN 23 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ //#define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/massdrop/alt/matrix.c b/keyboards/massdrop/alt/matrix.c index 472479d303..3141155712 100644 --- a/keyboards/massdrop/alt/matrix.c +++ b/keyboards/massdrop/alt/matrix.c @@ -128,7 +128,7 @@ uint8_t matrix_scan(void) else { //Begin or extend debounce on change - mdebouncing = timer_read64() + DEBOUNCING_DELAY; + mdebouncing = timer_read64() + DEBOUNCE; } matrix_scan_quantum(); diff --git a/keyboards/massdrop/ctrl/config.h b/keyboards/massdrop/ctrl/config.h index 9b9f98f5fe..215a2e1b19 100644 --- a/keyboards/massdrop/ctrl/config.h +++ b/keyboards/massdrop/ctrl/config.h @@ -92,7 +92,7 @@ along with this program. If not, see . #define DEBUG_BOOT_TRACING_PIN 23 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ //#define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/massdrop/ctrl/matrix.c b/keyboards/massdrop/ctrl/matrix.c index 5f1741e58a..f3529fe72a 100644 --- a/keyboards/massdrop/ctrl/matrix.c +++ b/keyboards/massdrop/ctrl/matrix.c @@ -128,7 +128,7 @@ uint8_t matrix_scan(void) else { //Begin or extend debounce on change - mdebouncing = timer_read64() + DEBOUNCING_DELAY; + mdebouncing = timer_read64() + DEBOUNCE; } matrix_scan_quantum(); diff --git a/keyboards/maxipad/config.h b/keyboards/maxipad/config.h index 6d8225d74e..50496c16b7 100644 --- a/keyboards/maxipad/config.h +++ b/keyboards/maxipad/config.h @@ -32,7 +32,7 @@ //#define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/mechkeys/mk60/config.h b/keyboards/mechkeys/mk60/config.h index 9d6a2565d6..9fccd8a8b0 100644 --- a/keyboards/mechkeys/mk60/config.h +++ b/keyboards/mechkeys/mk60/config.h @@ -80,7 +80,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/mechmini/v2/config.h b/keyboards/mechmini/v2/config.h index edca6a5c42..9da3e5f0ad 100755 --- a/keyboards/mechmini/v2/config.h +++ b/keyboards/mechmini/v2/config.h @@ -48,7 +48,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/meira/featherble/config.h b/keyboards/meira/featherble/config.h index d8f86fe027..fb24c60795 100644 --- a/keyboards/meira/featherble/config.h +++ b/keyboards/meira/featherble/config.h @@ -48,7 +48,7 @@ along with this program. If not, see . //#define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/meira/matrix.c b/keyboards/meira/matrix.c index c1952f35fb..030c91332d 100644 --- a/keyboards/meira/matrix.c +++ b/keyboards/meira/matrix.c @@ -33,11 +33,11 @@ along with this program. If not, see . #include "config.h" #include "timer.h" -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) static uint16_t debouncing_time; static bool debouncing = false; #endif @@ -132,7 +132,7 @@ uint8_t _matrix_scan(void) { // Set col, read rows for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_rows_on_col(matrix_debouncing, current_col); if (matrix_changed) { debouncing = true; @@ -144,8 +144,8 @@ uint8_t _matrix_scan(void) } -# if (DEBOUNCING_DELAY > 0) - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { +# if (DEBOUNCE > 0) + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCE)) { for (uint8_t i = 0; i < MATRIX_ROWS; i++) { matrix[i] = matrix_debouncing[i]; } @@ -276,5 +276,3 @@ static void unselect_cols(void) _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW } } - - diff --git a/keyboards/meira/promicro/config.h b/keyboards/meira/promicro/config.h index 3c2113a200..67e5ca06d1 100644 --- a/keyboards/meira/promicro/config.h +++ b/keyboards/meira/promicro/config.h @@ -39,7 +39,7 @@ along with this program. If not, see . #define CATERINA_BOOTLOADER /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/meishi/config.h b/keyboards/meishi/config.h index 6aa4e6b6ea..3393610c79 100644 --- a/keyboards/meishi/config.h +++ b/keyboards/meishi/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST @@ -180,4 +180,3 @@ along with this program. If not, see . /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 1 - diff --git a/keyboards/melody96/config.h b/keyboards/melody96/config.h index db814d0133..201b1ad07f 100644 --- a/keyboards/melody96/config.h +++ b/keyboards/melody96/config.h @@ -30,7 +30,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/meme/config.h b/keyboards/meme/config.h index bd3e1cf2c1..e06b0e4efe 100644 --- a/keyboards/meme/config.h +++ b/keyboards/meme/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/miniaxe/config.h b/keyboards/miniaxe/config.h index be8ef4bafa..db85097177 100644 --- a/keyboards/miniaxe/config.h +++ b/keyboards/miniaxe/config.h @@ -70,7 +70,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/minidox/config.h b/keyboards/minidox/config.h index b99180eb1a..7502983b6b 100644 --- a/keyboards/minidox/config.h +++ b/keyboards/minidox/config.h @@ -42,7 +42,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/mint60/config.h b/keyboards/mint60/config.h index 35449eb261..c98b9c1af8 100644 --- a/keyboards/mint60/config.h +++ b/keyboards/mint60/config.h @@ -59,7 +59,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/miuni32/config.h b/keyboards/miuni32/config.h index d7df83cfec..59402e8691 100644 --- a/keyboards/miuni32/config.h +++ b/keyboards/miuni32/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/model01/config.h b/keyboards/model01/config.h index 167310731f..c2160979cd 100644 --- a/keyboards/model01/config.h +++ b/keyboards/model01/config.h @@ -32,7 +32,7 @@ along with this program. If not, see . #define MATRIX_COLS 8 /* The scanners already debounce for us */ -#define DEBOUNCING_DELAY 0 +#define DEBOUNCE 0 /* RGB matrix constants */ #define DRIVER_LED_TOTAL 64 diff --git a/keyboards/mt40/config.h b/keyboards/mt40/config.h index e268c3c1a6..48f707f71f 100644 --- a/keyboards/mt40/config.h +++ b/keyboards/mt40/config.h @@ -68,7 +68,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -/* #define DEBOUNCING_DELAY 5 */ +/* #define DEBOUNCE 5 */ /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/mt980/config.h b/keyboards/mt980/config.h index 88c25a5870..6b8b952952 100644 --- a/keyboards/mt980/config.h +++ b/keyboards/mt980/config.h @@ -29,7 +29,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/mxss/config.h b/keyboards/mxss/config.h index e3636ed519..812f301d6f 100644 --- a/keyboards/mxss/config.h +++ b/keyboards/mxss/config.h @@ -41,7 +41,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Basic RGB configuration */ #define RGB_DI_PIN C7 diff --git a/keyboards/namecard2x4/rev1/config.h b/keyboards/namecard2x4/rev1/config.h index 4c60d059df..9286afa698 100644 --- a/keyboards/namecard2x4/rev1/config.h +++ b/keyboards/namecard2x4/rev1/config.h @@ -60,7 +60,7 @@ along with this program. If not, see . //#define BACKLIGHT_LEVELS 1 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/namecard2x4/rev2/config.h b/keyboards/namecard2x4/rev2/config.h index 4343dff8cf..f2cf053d23 100644 --- a/keyboards/namecard2x4/rev2/config.h +++ b/keyboards/namecard2x4/rev2/config.h @@ -60,7 +60,7 @@ along with this program. If not, see . //#define BACKLIGHT_LEVELS 1 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/nek_type_a/config.h b/keyboards/nek_type_a/config.h index 782b91d0e3..5b105804dd 100644 --- a/keyboards/nek_type_a/config.h +++ b/keyboards/nek_type_a/config.h @@ -39,7 +39,7 @@ along with this program. If not, see . #define DIODE_DIRECTION ROW2COL /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE @@ -51,5 +51,3 @@ along with this program. If not, see . #define IS_COMMAND() ( \ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ ) - - diff --git a/keyboards/nek_type_a/matrix.c b/keyboards/nek_type_a/matrix.c index 525296b1f1..a3c0155e1a 100644 --- a/keyboards/nek_type_a/matrix.c +++ b/keyboards/nek_type_a/matrix.c @@ -38,11 +38,11 @@ along with this program. If not, see . /* Set 0 if debouncing isn't needed */ -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) static uint16_t debouncing_time; static bool debouncing = false; #endif @@ -160,7 +160,7 @@ uint8_t matrix_scan(void) // Set row, read cols for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_cols_on_row(matrix_debouncing, current_row); if (matrix_changed) { @@ -178,7 +178,7 @@ uint8_t matrix_scan(void) // Set col, read rows for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_rows_on_col(matrix_debouncing, current_col); if (matrix_changed) { debouncing = true; @@ -192,8 +192,8 @@ uint8_t matrix_scan(void) #endif -# if (DEBOUNCING_DELAY > 0) - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { +# if (DEBOUNCE > 0) + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCE)) { for (uint8_t i = 0; i < MATRIX_ROWS; i++) { matrix[i] = matrix_debouncing[i]; } @@ -207,7 +207,7 @@ uint8_t matrix_scan(void) bool matrix_is_modified(void) { -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) if (debouncing) return false; #endif return true; diff --git a/keyboards/niu_mini/config.h b/keyboards/niu_mini/config.h index 9a4b43c1e6..2c202a8e46 100644 --- a/keyboards/niu_mini/config.h +++ b/keyboards/niu_mini/config.h @@ -51,7 +51,7 @@ along with this program. If not, see . #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/nk65/config.h b/keyboards/nk65/config.h index 0edb1bb62e..791e444689 100755 --- a/keyboards/nk65/config.h +++ b/keyboards/nk65/config.h @@ -39,7 +39,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/novelpad/config.h b/keyboards/novelpad/config.h index 3a47c0eb65..c9b6b91a59 100755 --- a/keyboards/novelpad/config.h +++ b/keyboards/novelpad/config.h @@ -40,7 +40,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/noxary/220/config.h b/keyboards/noxary/220/config.h index e5a6be2de7..1242de61bc 100644 --- a/keyboards/noxary/220/config.h +++ b/keyboards/noxary/220/config.h @@ -86,7 +86,7 @@ along with this program. If not, see . // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/noxary/260/config.h b/keyboards/noxary/260/config.h index 984712dd10..379dbbf78d 100644 --- a/keyboards/noxary/260/config.h +++ b/keyboards/noxary/260/config.h @@ -86,7 +86,7 @@ along with this program. If not, see . // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/noxary/268/config.h b/keyboards/noxary/268/config.h index d6f5234cbd..8264b8019e 100644 --- a/keyboards/noxary/268/config.h +++ b/keyboards/noxary/268/config.h @@ -47,7 +47,7 @@ along with this program. If not, see . #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/noxary/268_2/config.h b/keyboards/noxary/268_2/config.h index 733c879903..547c729f9f 100644 --- a/keyboards/noxary/268_2/config.h +++ b/keyboards/noxary/268_2/config.h @@ -56,7 +56,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/noxary/280/config.h b/keyboards/noxary/280/config.h index 427709d1b4..d0a10866a9 100644 --- a/keyboards/noxary/280/config.h +++ b/keyboards/noxary/280/config.h @@ -86,7 +86,7 @@ along with this program. If not, see . // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/noxary/x268/config.h b/keyboards/noxary/x268/config.h index d2a8c3b9fd..0604f6529b 100644 --- a/keyboards/noxary/x268/config.h +++ b/keyboards/noxary/x268/config.h @@ -65,7 +65,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/ok60/config.h b/keyboards/ok60/config.h index eb75b71c97..cc056a489c 100644 --- a/keyboards/ok60/config.h +++ b/keyboards/ok60/config.h @@ -52,7 +52,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/omnikey_blackheart/config.h b/keyboards/omnikey_blackheart/config.h index edfd113dee..6c9be77b6b 100644 --- a/keyboards/omnikey_blackheart/config.h +++ b/keyboards/omnikey_blackheart/config.h @@ -29,7 +29,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/orange75/config.h b/keyboards/orange75/config.h index 7d1b497be0..35399cc600 100644 --- a/keyboards/orange75/config.h +++ b/keyboards/orange75/config.h @@ -26,7 +26,7 @@ /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/org60/config.h b/keyboards/org60/config.h index 5f3f4f5deb..f455fea2a2 100644 --- a/keyboards/org60/config.h +++ b/keyboards/org60/config.h @@ -55,7 +55,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* RGB Underglow * F6 PIN for Org60 that has pre-soldered WS2812 LEDs diff --git a/keyboards/orthodox/rev1/config.h b/keyboards/orthodox/rev1/config.h index 198fff5aca..89e36dce7b 100644 --- a/keyboards/orthodox/rev1/config.h +++ b/keyboards/orthodox/rev1/config.h @@ -57,7 +57,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ // #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/orthodox/rev3/config.h b/keyboards/orthodox/rev3/config.h index 53e5b15ae8..ad3437a626 100644 --- a/keyboards/orthodox/rev3/config.h +++ b/keyboards/orthodox/rev3/config.h @@ -62,7 +62,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ // #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/orthodox/rev3_teensy/config.h b/keyboards/orthodox/rev3_teensy/config.h index 54cbb823ec..c26e15dee7 100644 --- a/keyboards/orthodox/rev3_teensy/config.h +++ b/keyboards/orthodox/rev3_teensy/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ // #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/paladin64/config.h b/keyboards/paladin64/config.h index 0696fefd06..8d7cef2483 100755 --- a/keyboards/paladin64/config.h +++ b/keyboards/paladin64/config.h @@ -97,7 +97,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/panc60/config.h b/keyboards/panc60/config.h index edb25ad274..b5889180e8 100644 --- a/keyboards/panc60/config.h +++ b/keyboards/panc60/config.h @@ -34,7 +34,7 @@ along with this program. If not, see . #define UNUSED_PINS #define DIODE_DIRECTION COL2ROW -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #define NO_BACKLIGHT_CLOCK #define BACKLIGHT_LEVELS 1 diff --git a/keyboards/pearl/config.h b/keyboards/pearl/config.h index 00850b8f09..3dbe5ee030 100644 --- a/keyboards/pearl/config.h +++ b/keyboards/pearl/config.h @@ -40,7 +40,7 @@ along with this program. If not, see . #define UNUSED_PINS #define DIODE_DIRECTION COL2ROW -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #define NO_ACTION_MACRO #define NO_ACTION_FUNCTION diff --git a/keyboards/phantom/config.h b/keyboards/phantom/config.h index 3fa4624452..4ca731f2d7 100644 --- a/keyboards/phantom/config.h +++ b/keyboards/phantom/config.h @@ -61,7 +61,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/pinky/3/config.h b/keyboards/pinky/3/config.h index 370d2a702d..8a3f53a175 100644 --- a/keyboards/pinky/3/config.h +++ b/keyboards/pinky/3/config.h @@ -81,7 +81,7 @@ // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/pinky/4/config.h b/keyboards/pinky/4/config.h index a6beaf29d4..a1544bc486 100644 --- a/keyboards/pinky/4/config.h +++ b/keyboards/pinky/4/config.h @@ -81,7 +81,7 @@ // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/plaid/config.h b/keyboards/plaid/config.h index efef3ca18b..9da31d700f 100644 --- a/keyboards/plaid/config.h +++ b/keyboards/plaid/config.h @@ -83,7 +83,7 @@ along with this program. If not, see . // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/plain60/config.h b/keyboards/plain60/config.h index 5dd784887c..a86c235871 100644 --- a/keyboards/plain60/config.h +++ b/keyboards/plain60/config.h @@ -43,7 +43,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #define QMK_ESC_OUTPUT D2 // usually COL #define QMK_ESC_INPUT B4 // usually ROW diff --git a/keyboards/planck/config.h b/keyboards/planck/config.h index 837311c769..e0839a175f 100644 --- a/keyboards/planck/config.h +++ b/keyboards/planck/config.h @@ -56,7 +56,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/planck/keymaps/dodger/config.h b/keyboards/planck/keymaps/dodger/config.h index 4b7931e778..f6aaec155a 100644 --- a/keyboards/planck/keymaps/dodger/config.h +++ b/keyboards/planck/keymaps/dodger/config.h @@ -56,7 +56,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 15 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/playkbtw/ca66/ca66.c b/keyboards/playkbtw/ca66/ca66.c index 6f24a895f5..5f61df64e5 100644 --- a/keyboards/playkbtw/ca66/ca66.c +++ b/keyboards/playkbtw/ca66/ca66.c @@ -9,7 +9,7 @@ void bootmagic_lite(void) // We need multiple scans because debouncing can't be turned off. matrix_scan(); - wait_ms(DEBOUNCING_DELAY); + wait_ms(DEBOUNCE); matrix_scan(); // If the Esc (matrix 0,0) is held down on power up, diff --git a/keyboards/playkbtw/ca66/config.h b/keyboards/playkbtw/ca66/config.h index 958fdd0d49..b4c0e62341 100644 --- a/keyboards/playkbtw/ca66/config.h +++ b/keyboards/playkbtw/ca66/config.h @@ -29,7 +29,7 @@ #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/playkbtw/pk60/config.h b/keyboards/playkbtw/pk60/config.h index 77822e0a12..93e29951e9 100644 --- a/keyboards/playkbtw/pk60/config.h +++ b/keyboards/playkbtw/pk60/config.h @@ -30,7 +30,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/preonic/config.h b/keyboards/preonic/config.h index 1887bff5df..7ed4814fab 100644 --- a/keyboards/preonic/config.h +++ b/keyboards/preonic/config.h @@ -56,7 +56,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/preonic/keymaps/kinesis/config.h b/keyboards/preonic/keymaps/kinesis/config.h index 7899408cda..fd934726bb 100644 --- a/keyboards/preonic/keymaps/kinesis/config.h +++ b/keyboards/preonic/keymaps/kinesis/config.h @@ -49,7 +49,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/preonic/keymaps/zach/config.h b/keyboards/preonic/keymaps/zach/config.h index 58690a4aba..66e6b087f4 100644 --- a/keyboards/preonic/keymaps/zach/config.h +++ b/keyboards/preonic/keymaps/zach/config.h @@ -50,7 +50,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 5 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ //#define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/primekb/prime_e/config.h b/keyboards/primekb/prime_e/config.h index 331993f4b2..9ef4edd88a 100644 --- a/keyboards/primekb/prime_e/config.h +++ b/keyboards/primekb/prime_e/config.h @@ -44,7 +44,7 @@ along with this program. If not, see . /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/primekb/prime_l/config.h b/keyboards/primekb/prime_l/config.h index 8451a7686b..786ceb59cd 100644 --- a/keyboards/primekb/prime_l/config.h +++ b/keyboards/primekb/prime_l/config.h @@ -44,7 +44,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 4 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/primekb/prime_m/config.h b/keyboards/primekb/prime_m/config.h index 119e20a40e..75731abf78 100644 --- a/keyboards/primekb/prime_m/config.h +++ b/keyboards/primekb/prime_m/config.h @@ -44,7 +44,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 4 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/primekb/prime_o/config.h b/keyboards/primekb/prime_o/config.h index 2a35785ea0..36de49b9e5 100644 --- a/keyboards/primekb/prime_o/config.h +++ b/keyboards/primekb/prime_o/config.h @@ -44,7 +44,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 4 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/primekb/prime_r/config.h b/keyboards/primekb/prime_r/config.h index 345bf91b89..942eced325 100644 --- a/keyboards/primekb/prime_r/config.h +++ b/keyboards/primekb/prime_r/config.h @@ -47,7 +47,7 @@ along with this program. If not, see . #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/puck/config.h b/keyboards/puck/config.h index b2cb1b23e3..3eaa8cd264 100644 --- a/keyboards/puck/config.h +++ b/keyboards/puck/config.h @@ -22,7 +22,7 @@ #define DIODE_DIRECTION ROW2COL /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* number of backlight levels */ #define BACKLIGHT_LEVELS 3 diff --git a/keyboards/quantrik/kyuu/config.h b/keyboards/quantrik/kyuu/config.h index 655314985d..b40ce64cc9 100644 --- a/keyboards/quantrik/kyuu/config.h +++ b/keyboards/quantrik/kyuu/config.h @@ -80,7 +80,7 @@ along with this program. If not, see . // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/qwertyydox/config.h b/keyboards/qwertyydox/config.h index 4c651d3c6c..67f5d3c16a 100644 --- a/keyboards/qwertyydox/config.h +++ b/keyboards/qwertyydox/config.h @@ -47,7 +47,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* serial.c configuration for split keyboard */ #define SOFT_SERIAL_PIN D0 diff --git a/keyboards/qwertyydox/rev1/config.h b/keyboards/qwertyydox/rev1/config.h index 5823beb3d4..703d62de75 100644 --- a/keyboards/qwertyydox/rev1/config.h +++ b/keyboards/qwertyydox/rev1/config.h @@ -47,7 +47,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* serial.c configuration for split keyboard */ #define SOFT_SERIAL_PIN D0 diff --git a/keyboards/rama/koyu/config.h b/keyboards/rama/koyu/config.h index e7817e79a0..4fa8c3d8ad 100644 --- a/keyboards/rama/koyu/config.h +++ b/keyboards/rama/koyu/config.h @@ -44,7 +44,7 @@ #define DIODE_DIRECTION COL2ROW // Set 0 if debouncing isn't needed -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/rama/m10_b/config.h b/keyboards/rama/m10_b/config.h index 25fd58d154..32d1d21ed3 100644 --- a/keyboards/rama/m10_b/config.h +++ b/keyboards/rama/m10_b/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/rama/m60_a/config.h b/keyboards/rama/m60_a/config.h index 1cbdee5ae3..b3e9162311 100644 --- a/keyboards/rama/m60_a/config.h +++ b/keyboards/rama/m60_a/config.h @@ -42,7 +42,7 @@ #define DIODE_DIRECTION COL2ROW // Set 0 if debouncing isn't needed -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/rama/m6_a/config.h b/keyboards/rama/m6_a/config.h index efaf74a932..341e29b958 100644 --- a/keyboards/rama/m6_a/config.h +++ b/keyboards/rama/m6_a/config.h @@ -51,7 +51,7 @@ // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/rama/m6_b/config.h b/keyboards/rama/m6_b/config.h index 0d690bffaf..015bc6df8a 100644 --- a/keyboards/rama/m6_b/config.h +++ b/keyboards/rama/m6_b/config.h @@ -51,7 +51,7 @@ // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/rama/u80_a/config.h b/keyboards/rama/u80_a/config.h index 953bf63f23..44d9e21333 100644 --- a/keyboards/rama/u80_a/config.h +++ b/keyboards/rama/u80_a/config.h @@ -52,7 +52,7 @@ // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/redox/rev1/config.h b/keyboards/redox/rev1/config.h index ce205e02e0..72ca94b791 100644 --- a/keyboards/redox/rev1/config.h +++ b/keyboards/redox/rev1/config.h @@ -47,7 +47,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* serial.c configuration for split keyboard */ #define SOFT_SERIAL_PIN D0 diff --git a/keyboards/rgbkb/sol/config.h b/keyboards/rgbkb/sol/config.h index a7317d9d9c..1afd973e90 100644 --- a/keyboards/rgbkb/sol/config.h +++ b/keyboards/rgbkb/sol/config.h @@ -41,7 +41,7 @@ along with this program. If not, see . #define ENCODERS_PAD_B { D6 } /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* ws2812 RGB LED */ #define RGB_DI_PIN B3 diff --git a/keyboards/rgbkb/zen/rev1/config.h b/keyboards/rgbkb/zen/rev1/config.h index 88f39af484..4d81855a8b 100644 --- a/keyboards/rgbkb/zen/rev1/config.h +++ b/keyboards/rgbkb/zen/rev1/config.h @@ -43,7 +43,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/rgbkb/zen/rev2/config.h b/keyboards/rgbkb/zen/rev2/config.h index c56956108d..b9f3d2228b 100644 --- a/keyboards/rgbkb/zen/rev2/config.h +++ b/keyboards/rgbkb/zen/rev2/config.h @@ -56,7 +56,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/rgbkb/zygomorph/rev1/config.h b/keyboards/rgbkb/zygomorph/rev1/config.h index 107e58c123..ad58761cc5 100644 --- a/keyboards/rgbkb/zygomorph/rev1/config.h +++ b/keyboards/rgbkb/zygomorph/rev1/config.h @@ -45,7 +45,7 @@ along with this program. If not, see . #define ENCODERS_PAD_B { D7 } /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* ws2812 RGB LED */ #define RGB_DI_PIN B7 diff --git a/keyboards/romac/config.h b/keyboards/romac/config.h index b92785fd52..da236c5004 100644 --- a/keyboards/romac/config.h +++ b/keyboards/romac/config.h @@ -26,7 +26,7 @@ #define BACKLIGHT_LEVELS 0 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/s7_elephant/config.h b/keyboards/s7_elephant/config.h index 6335fbc9c9..c4f57178d8 100644 --- a/keyboards/s7_elephant/config.h +++ b/keyboards/s7_elephant/config.h @@ -23,7 +23,7 @@ #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/satan/config.h b/keyboards/satan/config.h index c15e5c37c1..d8c9ae9ab5 100644 --- a/keyboards/satan/config.h +++ b/keyboards/satan/config.h @@ -46,7 +46,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/satan/keymaps/admiralStrokers/config.h b/keyboards/satan/keymaps/admiralStrokers/config.h index 17e0ea3b76..c8d40730fb 100644 --- a/keyboards/satan/keymaps/admiralStrokers/config.h +++ b/keyboards/satan/keymaps/admiralStrokers/config.h @@ -48,7 +48,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/satan/keymaps/fakb/config.h b/keyboards/satan/keymaps/fakb/config.h index 81598f22ed..dc182753d7 100644 --- a/keyboards/satan/keymaps/fakb/config.h +++ b/keyboards/satan/keymaps/fakb/config.h @@ -30,7 +30,7 @@ //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ //#define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/scarletbandana/config.h b/keyboards/scarletbandana/config.h index 01cf950654..4e37b4b424 100644 --- a/keyboards/scarletbandana/config.h +++ b/keyboards/scarletbandana/config.h @@ -55,4 +55,4 @@ along with this program. If not, see . #define NO_ACTION_MACRO #define NO_ACTION_FUNCTION -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 diff --git a/keyboards/scythe/config.h b/keyboards/scythe/config.h index 76d3323645..66d47c3566 100644 --- a/keyboards/scythe/config.h +++ b/keyboards/scythe/config.h @@ -64,7 +64,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST @@ -237,4 +237,3 @@ along with this program. If not, see . //#define I2C_MASTER_RIGHT #define TAPPING_TERM 120 - diff --git a/keyboards/sentraq/number_pad/config.h b/keyboards/sentraq/number_pad/config.h index f02e537b69..a5df625aa7 100644 --- a/keyboards/sentraq/number_pad/config.h +++ b/keyboards/sentraq/number_pad/config.h @@ -75,4 +75,4 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 diff --git a/keyboards/sentraq/s60_x/default/config.h b/keyboards/sentraq/s60_x/default/config.h index d7fb79625c..dc41141434 100644 --- a/keyboards/sentraq/s60_x/default/config.h +++ b/keyboards/sentraq/s60_x/default/config.h @@ -36,7 +36,7 @@ #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #define LOCKING_SUPPORT_ENABLE #define LOCKING_RESYNC_ENABLE @@ -44,4 +44,3 @@ #define NO_ACTION_ONESHOT #define NO_ACTION_MACRO #define NO_ACTION_FUNCTION - diff --git a/keyboards/sentraq/s60_x/keymaps/bluebear/config.h b/keyboards/sentraq/s60_x/keymaps/bluebear/config.h index c1db5f64a6..0a6ce8178e 100644 --- a/keyboards/sentraq/s60_x/keymaps/bluebear/config.h +++ b/keyboards/sentraq/s60_x/keymaps/bluebear/config.h @@ -31,7 +31,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/sentraq/s60_x/rgb/config.h b/keyboards/sentraq/s60_x/rgb/config.h index 0e231a7228..57e736a05c 100644 --- a/keyboards/sentraq/s60_x/rgb/config.h +++ b/keyboards/sentraq/s60_x/rgb/config.h @@ -36,7 +36,7 @@ #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #define RGB_DI_PIN F6 #ifdef RGB_DI_PIN @@ -46,4 +46,3 @@ #define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_VAL_STEP 8 #endif - diff --git a/keyboards/sentraq/s65_plus/config.h b/keyboards/sentraq/s65_plus/config.h index c45fd24124..51aacfc196 100644 --- a/keyboards/sentraq/s65_plus/config.h +++ b/keyboards/sentraq/s65_plus/config.h @@ -36,7 +36,7 @@ #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/sentraq/s65_x/config.h b/keyboards/sentraq/s65_x/config.h index 4867652730..9c337bde45 100644 --- a/keyboards/sentraq/s65_x/config.h +++ b/keyboards/sentraq/s65_x/config.h @@ -38,7 +38,7 @@ #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/signum/3_0/elitec/config.h b/keyboards/signum/3_0/elitec/config.h index 3df07d17fc..88e45ef450 100644 --- a/keyboards/signum/3_0/elitec/config.h +++ b/keyboards/signum/3_0/elitec/config.h @@ -20,7 +20,7 @@ #define UNUSED_PINS /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/singa/config.h b/keyboards/singa/config.h index aca1153d71..29110bd4ea 100644 --- a/keyboards/singa/config.h +++ b/keyboards/singa/config.h @@ -34,7 +34,7 @@ along with this program. If not, see . #define UNUSED_PINS #define DIODE_DIRECTION COL2ROW -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #define NO_BACKLIGHT_CLOCK #define BACKLIGHT_LEVELS 1 diff --git a/keyboards/sixkeyboard/config.h b/keyboards/sixkeyboard/config.h index 3a672788bd..a825467afe 100644 --- a/keyboards/sixkeyboard/config.h +++ b/keyboards/sixkeyboard/config.h @@ -39,7 +39,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 0 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/snagpad/config.h b/keyboards/snagpad/config.h index d0c55cf971..9503ae25f9 100644 --- a/keyboards/snagpad/config.h +++ b/keyboards/snagpad/config.h @@ -29,7 +29,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/southpole/config.h b/keyboards/southpole/config.h index 5992a360f5..396384040f 100644 --- a/keyboards/southpole/config.h +++ b/keyboards/southpole/config.h @@ -29,7 +29,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/speedo/config.h b/keyboards/speedo/config.h index ac9d5e4f14..04195b8665 100644 --- a/keyboards/speedo/config.h +++ b/keyboards/speedo/config.h @@ -55,7 +55,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/standaside/config.h b/keyboards/standaside/config.h index fa3576ca5b..80c9f8d21b 100644 --- a/keyboards/standaside/config.h +++ b/keyboards/standaside/config.h @@ -40,7 +40,7 @@ /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST @@ -201,4 +201,3 @@ #define LCD_E_PIN 1 //< pin for Enable line #endif */ - diff --git a/keyboards/staryu/config.h b/keyboards/staryu/config.h index 05131b68b5..dc7353fcce 100755 --- a/keyboards/staryu/config.h +++ b/keyboards/staryu/config.h @@ -68,7 +68,7 @@ along with this program. If not, see . #define BACKLIGHT_ON_STATE 1 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Bootmagic Lite key configuration */ #define BOOTMAGIC_LITE_ROW 0 diff --git a/keyboards/subatomic/config.h b/keyboards/subatomic/config.h index d4ace70d83..f509ca53ef 100644 --- a/keyboards/subatomic/config.h +++ b/keyboards/subatomic/config.h @@ -52,7 +52,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/sx60/config.h b/keyboards/sx60/config.h index cad8b0ba45..d75e19b290 100755 --- a/keyboards/sx60/config.h +++ b/keyboards/sx60/config.h @@ -31,7 +31,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/sx60/matrix.c b/keyboards/sx60/matrix.c index 634a98a12c..e8e9d6574e 100644 --- a/keyboards/sx60/matrix.c +++ b/keyboards/sx60/matrix.c @@ -30,11 +30,11 @@ along with this program. If not, see . /* Set 0 if debouncing isn't needed */ -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) static uint16_t debouncing_time; static bool debouncing = false; #endif @@ -154,7 +154,7 @@ uint8_t matrix_scan(void) /* Set row, read cols */ for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_cols_on_row(matrix_debouncing, current_row); if (matrix_changed) { @@ -166,8 +166,8 @@ uint8_t matrix_scan(void) # endif } -# if (DEBOUNCING_DELAY > 0) - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { +# if (DEBOUNCE > 0) + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCE)) { for (uint8_t i = 0; i < MATRIX_ROWS; i++) { matrix[i] = matrix_debouncing[i]; } @@ -181,7 +181,7 @@ uint8_t matrix_scan(void) bool matrix_is_modified(void) { -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) if (debouncing) return false; #endif return true; diff --git a/keyboards/tada68/config.h b/keyboards/tada68/config.h index ab564cd3b9..a8fa37a5b7 100755 --- a/keyboards/tada68/config.h +++ b/keyboards/tada68/config.h @@ -47,7 +47,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/tetris/config.h b/keyboards/tetris/config.h index 2cc7d2951d..7fe0c2d646 100755 --- a/keyboards/tetris/config.h +++ b/keyboards/tetris/config.h @@ -23,7 +23,7 @@ #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE @@ -52,4 +52,3 @@ #define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_EFFECT_KNIGHT_LED_NUM 12 - diff --git a/keyboards/the_ruler/config.h b/keyboards/the_ruler/config.h index c340019be7..ecae3a4f21 100644 --- a/keyboards/the_ruler/config.h +++ b/keyboards/the_ruler/config.h @@ -50,7 +50,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/thevankeyboards/bananasplit/config.h b/keyboards/thevankeyboards/bananasplit/config.h index a96c59dbb8..7c0b5b201a 100644 --- a/keyboards/thevankeyboards/bananasplit/config.h +++ b/keyboards/thevankeyboards/bananasplit/config.h @@ -48,7 +48,7 @@ along with this program. If not, see . #define BACKLIGHT_PIN B7 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #define TAPPING_TERM 175 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ diff --git a/keyboards/thevankeyboards/minivan/config.h b/keyboards/thevankeyboards/minivan/config.h index 38207d38d8..22fb377629 100644 --- a/keyboards/thevankeyboards/minivan/config.h +++ b/keyboards/thevankeyboards/minivan/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/thevankeyboards/minivan/keymaps/budi/config.h b/keyboards/thevankeyboards/minivan/keymaps/budi/config.h index 67bcf3546e..dc36b73808 100644 --- a/keyboards/thevankeyboards/minivan/keymaps/budi/config.h +++ b/keyboards/thevankeyboards/minivan/keymaps/budi/config.h @@ -4,10 +4,10 @@ #include "../../config.h" // place overrides here -#ifdef DEBOUNCING_DELAY -#undef DEBOUNCING_DELAY +#ifdef DEBOUNCE +#undef DEBOUNCE #endif -#define DEBOUNCING_DELAY 2 +#define DEBOUNCE 2 #define MOUSEKEY_INTERVAL 10 #define MOUSEKEY_DELAY 0 #define MOUSEKEY_TIME_TO_MAX 120 diff --git a/keyboards/thevankeyboards/roadkit/config.h b/keyboards/thevankeyboards/roadkit/config.h index 3f71780398..71bd6ba6bd 100644 --- a/keyboards/thevankeyboards/roadkit/config.h +++ b/keyboards/thevankeyboards/roadkit/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/tkc1800/config.h b/keyboards/tkc1800/config.h index 2f45d04dea..a45fb677e5 100644 --- a/keyboards/tkc1800/config.h +++ b/keyboards/tkc1800/config.h @@ -60,7 +60,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/tmo50/config.h b/keyboards/tmo50/config.h index 3af322e9b0..ee7f0e34aa 100644 --- a/keyboards/tmo50/config.h +++ b/keyboards/tmo50/config.h @@ -76,7 +76,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/toad/config.h b/keyboards/toad/config.h index f750b52bfb..5f3eb43c2b 100644 --- a/keyboards/toad/config.h +++ b/keyboards/toad/config.h @@ -30,7 +30,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/tokyo60/config.h b/keyboards/tokyo60/config.h index fddb37d282..2c1326c0a1 100644 --- a/keyboards/tokyo60/config.h +++ b/keyboards/tokyo60/config.h @@ -26,7 +26,7 @@ #define DIODE_DIRECTION ROW2COL /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Set power consumption to work with mobile devices */ #define USB_MAX_POWER_CONSUMPTION 100 diff --git a/keyboards/touchpad/config.h b/keyboards/touchpad/config.h index 8e93c9427f..b953b4f499 100644 --- a/keyboards/touchpad/config.h +++ b/keyboards/touchpad/config.h @@ -39,7 +39,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/treadstone32/config.h b/keyboards/treadstone32/config.h index 6151d6e829..a7f9914536 100644 --- a/keyboards/treadstone32/config.h +++ b/keyboards/treadstone32/config.h @@ -49,7 +49,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/treadstone48/rev1/config.h b/keyboards/treadstone48/rev1/config.h index d8ecf170dd..09fb621545 100644 --- a/keyboards/treadstone48/rev1/config.h +++ b/keyboards/treadstone48/rev1/config.h @@ -63,7 +63,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ //#define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/treasure/type9/config.h b/keyboards/treasure/type9/config.h index 6115880d06..220b7f7800 100644 --- a/keyboards/treasure/type9/config.h +++ b/keyboards/treasure/type9/config.h @@ -62,7 +62,7 @@ along with this program. If not, see . // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/uk78/config.h b/keyboards/uk78/config.h index eff8d1d620..879360773f 100644 --- a/keyboards/uk78/config.h +++ b/keyboards/uk78/config.h @@ -47,7 +47,7 @@ along with this program. If not, see . #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/ut472/config.h b/keyboards/ut472/config.h index 8f0d76271f..c71995ec7d 100644 --- a/keyboards/ut472/config.h +++ b/keyboards/ut472/config.h @@ -40,7 +40,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/v60_type_r/config.h b/keyboards/v60_type_r/config.h index e3e00a9f80..51ca6def94 100644 --- a/keyboards/v60_type_r/config.h +++ b/keyboards/v60_type_r/config.h @@ -63,7 +63,7 @@ along with this program. If not, see . #define RGB_STEP 16 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/vision_division/config.h b/keyboards/vision_division/config.h index c80a011e2a..249431b874 100644 --- a/keyboards/vision_division/config.h +++ b/keyboards/vision_division/config.h @@ -30,7 +30,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 0 +#define DEBOUNCE 0 #define MATRIX_MASKED diff --git a/keyboards/vitamins_included/matrix.c b/keyboards/vitamins_included/matrix.c index cf4c1064f8..1f5071c693 100644 --- a/keyboards/vitamins_included/matrix.c +++ b/keyboards/vitamins_included/matrix.c @@ -45,11 +45,11 @@ along with this program. If not, see . # include "serial.h" #endif -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) static uint16_t debouncing_time; static bool debouncing = false; #endif @@ -192,7 +192,7 @@ uint8_t _matrix_scan(void) #if (DIODE_DIRECTION == COL2ROW) // Set row, read cols for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row); if (matrix_changed) { @@ -209,7 +209,7 @@ uint8_t _matrix_scan(void) #elif (DIODE_DIRECTION == ROW2COL) // Set col, read rows for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col); if (matrix_changed) { debouncing = true; @@ -222,8 +222,8 @@ uint8_t _matrix_scan(void) } #endif -# if (DEBOUNCING_DELAY > 0) - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { +# if (DEBOUNCE > 0) + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCE)) { for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { matrix[i+offset] = matrix_debouncing[i+offset]; } diff --git a/keyboards/vitamins_included/rev1/config.h b/keyboards/vitamins_included/rev1/config.h index 7112c78917..f4e5666fef 100644 --- a/keyboards/vitamins_included/rev1/config.h +++ b/keyboards/vitamins_included/rev1/config.h @@ -45,7 +45,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/waldo/config.h b/keyboards/waldo/config.h index c460e7c274..c913ae7712 100644 --- a/keyboards/waldo/config.h +++ b/keyboards/waldo/config.h @@ -47,7 +47,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/wasdat/config.h b/keyboards/wasdat/config.h index 73dcdc536d..b5c4d3bc2d 100644 --- a/keyboards/wasdat/config.h +++ b/keyboards/wasdat/config.h @@ -91,7 +91,7 @@ along with this program. If not, see . // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/westfoxtrot/aanzee/config.h b/keyboards/westfoxtrot/aanzee/config.h index 3959066b22..d88101fdc8 100644 --- a/keyboards/westfoxtrot/aanzee/config.h +++ b/keyboards/westfoxtrot/aanzee/config.h @@ -68,7 +68,7 @@ along with this program. If not, see . #define RGBW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/westfoxtrot/cyclops/config.h b/keyboards/westfoxtrot/cyclops/config.h index b9a8fb28b1..3af6070310 100644 --- a/keyboards/westfoxtrot/cyclops/config.h +++ b/keyboards/westfoxtrot/cyclops/config.h @@ -49,7 +49,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST @@ -204,4 +204,4 @@ along with this program. If not, see . /* Bootmagic Lite key configuration */ // #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 \ No newline at end of file +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/westfoxtrot/cypher/config.h b/keyboards/westfoxtrot/cypher/config.h index 48ff816f9b..1378837037 100644 --- a/keyboards/westfoxtrot/cypher/config.h +++ b/keyboards/westfoxtrot/cypher/config.h @@ -53,7 +53,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 5 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/wilba_tech/wt60_a/config.h b/keyboards/wilba_tech/wt60_a/config.h index f492074e3f..3a2adb3c4b 100644 --- a/keyboards/wilba_tech/wt60_a/config.h +++ b/keyboards/wilba_tech/wt60_a/config.h @@ -46,7 +46,7 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION ROW2COL - + // #define BACKLIGHT_PIN B7 // #define BACKLIGHT_BREATHING // #define BACKLIGHT_LEVELS 3 diff --git a/keyboards/wilba_tech/wt65_a/config.h b/keyboards/wilba_tech/wt65_a/config.h index ec488fb50c..cb0df1460d 100644 --- a/keyboards/wilba_tech/wt65_a/config.h +++ b/keyboards/wilba_tech/wt65_a/config.h @@ -46,7 +46,7 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION ROW2COL - + // #define BACKLIGHT_PIN B7 // #define BACKLIGHT_BREATHING // #define BACKLIGHT_LEVELS 3 diff --git a/keyboards/wilba_tech/wt69_a/config.h b/keyboards/wilba_tech/wt69_a/config.h index 653e90d47b..0ed40b27e0 100644 --- a/keyboards/wilba_tech/wt69_a/config.h +++ b/keyboards/wilba_tech/wt69_a/config.h @@ -46,7 +46,7 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION ROW2COL - + // #define BACKLIGHT_PIN B7 // #define BACKLIGHT_BREATHING // #define BACKLIGHT_LEVELS 3 diff --git a/keyboards/wilba_tech/wt75_a/config.h b/keyboards/wilba_tech/wt75_a/config.h index 8d7025a60d..d1ae331566 100644 --- a/keyboards/wilba_tech/wt75_a/config.h +++ b/keyboards/wilba_tech/wt75_a/config.h @@ -46,7 +46,7 @@ /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION ROW2COL - + // #define BACKLIGHT_PIN B7 // #define BACKLIGHT_BREATHING // #define BACKLIGHT_LEVELS 3 diff --git a/keyboards/wilba_tech/wt80_a/config.h b/keyboards/wilba_tech/wt80_a/config.h index 5a825c3f75..7d974193c2 100644 --- a/keyboards/wilba_tech/wt80_a/config.h +++ b/keyboards/wilba_tech/wt80_a/config.h @@ -46,7 +46,7 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION ROW2COL - + // #define BACKLIGHT_PIN B7 // #define BACKLIGHT_BREATHING // #define BACKLIGHT_LEVELS 3 diff --git a/keyboards/wilba_tech/wt8_a/config.h b/keyboards/wilba_tech/wt8_a/config.h index 43f692e0fb..6604b7ce82 100644 --- a/keyboards/wilba_tech/wt8_a/config.h +++ b/keyboards/wilba_tech/wt8_a/config.h @@ -46,7 +46,7 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW - + // #define BACKLIGHT_PIN B7 // #define BACKLIGHT_BREATHING // #define BACKLIGHT_LEVELS 3 diff --git a/keyboards/xd60/rev2/config.h b/keyboards/xd60/rev2/config.h index 6c447b89ff..5f23f6eac3 100644 --- a/keyboards/xd60/rev2/config.h +++ b/keyboards/xd60/rev2/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* RGB Underglow * F6 PIN for XD60v2 that has pre-soldered WS2812 LEDs diff --git a/keyboards/xd60/rev3/config.h b/keyboards/xd60/rev3/config.h index d88330cf7b..861755e45c 100644 --- a/keyboards/xd60/rev3/config.h +++ b/keyboards/xd60/rev3/config.h @@ -53,7 +53,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* RGB Underglow * F6 PIN for XD60v3 that has pre-soldered LEDs diff --git a/keyboards/xd75/config.h b/keyboards/xd75/config.h index bc1f1860f9..7f8b71c45c 100644 --- a/keyboards/xd75/config.h +++ b/keyboards/xd75/config.h @@ -48,12 +48,12 @@ along with this program. If not, see . /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW - + #define BACKLIGHT_PIN F5 #define BACKLIGHT_LEVELS 6 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/xd84/config.h b/keyboards/xd84/config.h index abb9f17a58..138c2c4c85 100644 --- a/keyboards/xd84/config.h +++ b/keyboards/xd84/config.h @@ -75,7 +75,7 @@ // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/xd87/config.h b/keyboards/xd87/config.h index 4fb52be6ed..dae9d3db8f 100644 --- a/keyboards/xd87/config.h +++ b/keyboards/xd87/config.h @@ -64,7 +64,7 @@ along with this program. If not, see . // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/xd96/config.h b/keyboards/xd96/config.h index df21205f8d..ea6c878e9e 100644 --- a/keyboards/xd96/config.h +++ b/keyboards/xd96/config.h @@ -76,7 +76,7 @@ // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/xmmx/config.h b/keyboards/xmmx/config.h index c08829ce3c..bee047bf05 100644 --- a/keyboards/xmmx/config.h +++ b/keyboards/xmmx/config.h @@ -30,7 +30,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/yd60mq/config.h b/keyboards/yd60mq/config.h index 2a899fa3ec..75e697802b 100644 --- a/keyboards/yd60mq/config.h +++ b/keyboards/yd60mq/config.h @@ -29,7 +29,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE @@ -44,4 +44,3 @@ #define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_VAL_STEP 8 #endif - diff --git a/keyboards/yd68/config.h b/keyboards/yd68/config.h index 4caedb0b57..17461c5dc3 100644 --- a/keyboards/yd68/config.h +++ b/keyboards/yd68/config.h @@ -62,7 +62,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/yosino58/rev1/config.h b/keyboards/yosino58/rev1/config.h index 8a0cf151b7..0214bc1024 100644 --- a/keyboards/yosino58/rev1/config.h +++ b/keyboards/yosino58/rev1/config.h @@ -20,7 +20,7 @@ along with this program. If not, see . /* USB Device descriptor parameter */ #define VENDOR_ID 0x0F6A -#define PRODUCT_ID 0x01B8 +#define PRODUCT_ID 0x01B8 #define DEVICE_VER 0x0001 #define MANUFACTURER sakuranbo0046 #define PRODUCT yosino58 @@ -42,7 +42,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ //#define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/z150_blackheart/config.h b/keyboards/z150_blackheart/config.h index c8a38b0388..fc33021ffc 100644 --- a/keyboards/z150_blackheart/config.h +++ b/keyboards/z150_blackheart/config.h @@ -23,7 +23,7 @@ #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/zeal60/config.h b/keyboards/zeal60/config.h index a5e41116dc..7c5340e730 100644 --- a/keyboards/zeal60/config.h +++ b/keyboards/zeal60/config.h @@ -42,7 +42,7 @@ #define DIODE_DIRECTION COL2ROW // Set 0 if debouncing isn't needed -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/zeal60/zeal60.c b/keyboards/zeal60/zeal60.c index 5f93c571ad..93f442f554 100644 --- a/keyboards/zeal60/zeal60.c +++ b/keyboards/zeal60/zeal60.c @@ -234,8 +234,8 @@ void bootmagic_lite(void) // We need multiple scans because debouncing can't be turned off. matrix_scan(); - wait_ms(DEBOUNCING_DELAY); - wait_ms(DEBOUNCING_DELAY); + wait_ms(DEBOUNCE); + wait_ms(DEBOUNCE); matrix_scan(); // If the Esc (matrix 0,0) is held down on power up, @@ -374,4 +374,3 @@ void suspend_wakeup_init_kb(void) backlight_set_suspend_state(false); #endif // RGB_BACKLIGHT_ENABLED } - diff --git a/keyboards/zeal65/config.h b/keyboards/zeal65/config.h index 224fce1f65..7217c6ed16 100644 --- a/keyboards/zeal65/config.h +++ b/keyboards/zeal65/config.h @@ -42,7 +42,7 @@ #define DIODE_DIRECTION COL2ROW // Set 0 if debouncing isn't needed -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/zinc/rev1/config.h b/keyboards/zinc/rev1/config.h index 370b5c2030..c8560233d7 100644 --- a/keyboards/zinc/rev1/config.h +++ b/keyboards/zinc/rev1/config.h @@ -27,7 +27,7 @@ along with this program. If not, see . #define DEVICE_VER 0x0001 #define MANUFACTURER monksoffunk #define PRODUCT zinc rev.1 -#define DESCRIPTION A split keyboard +#define DESCRIPTION A split keyboard #define PREVENT_STUCK_MODIFIERS #define TAPPING_FORCE_HOLD @@ -59,7 +59,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ //#define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/zinc/reva/config.h b/keyboards/zinc/reva/config.h index f4277f7138..6ae12d54cc 100644 --- a/keyboards/zinc/reva/config.h +++ b/keyboards/zinc/reva/config.h @@ -24,7 +24,7 @@ along with this program. If not, see . #define DEVICE_VER 0x0001 #define MANUFACTURER monksoffunk #define PRODUCT zinc rev.A -#define DESCRIPTION A split keyboard +#define DESCRIPTION A split keyboard #define PREVENT_STUCK_MODIFIERS #define TAPPING_FORCE_HOLD @@ -56,7 +56,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ //#define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/zlant/config.h b/keyboards/zlant/config.h index 8732a6d371..a6b5227d65 100755 --- a/keyboards/zlant/config.h +++ b/keyboards/zlant/config.h @@ -30,7 +30,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE -- cgit 1.4.1 From 09968ba035f3bfa4df5b1d142dddfa669aefb2d7 Mon Sep 17 00:00:00 2001 From: XScorpion2 Date: Fri, 7 Jun 2019 19:02:05 -0500 Subject: Fixing OLED Driver for 128x64 displays (#6085) --- docs/feature_oled_driver.md | 9 +++++---- drivers/oled/oled_driver.c | 6 +++++- drivers/oled/oled_driver.h | 47 ++++++++++++++++++++++++++++++++++++++++++--- 3 files changed, 54 insertions(+), 8 deletions(-) (limited to 'docs') diff --git a/docs/feature_oled_driver.md b/docs/feature_oled_driver.md index fcc19515a9..144b695b76 100644 --- a/docs/feature_oled_driver.md +++ b/docs/feature_oled_driver.md @@ -108,10 +108,11 @@ void oled_task_user(void) { |`OLED_DISPLAY_CUSTOM` |*Not defined* |Changes the display defines for use with custom displays.
Requires user to implement the below defines. | |`OLED_DISPLAY_WIDTH` |`128` |The width of the OLED display. | |`OLED_DISPLAY_HEIGHT` |`32` |The height of the OLED display. | -|`OLED_MATRIX_SIZE` |`512` |The local buffer size to allocate.
`(OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH)`| -|`OLED_BLOCK_TYPE` |`uint16_t` |The unsigned integer type to use for dirty rendering.| -|`OLED_BLOCK_COUNT` |`16` |The number of blocks the display is divided into for dirty rendering.
`(sizeof(OLED_BLOCK_TYPE) * 8)`| -|`OLED_BLOCK_SIZE` |`32` |The size of each block for dirty rendering
`(OLED_MATRIX_SIZE / OLED_BLOCK_COUNT)`| +|`OLED_MATRIX_SIZE` |`512` |The local buffer size to allocate.
`(OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH)`. | +|`OLED_BLOCK_TYPE` |`uint16_t` |The unsigned integer type to use for dirty rendering. | +|`OLED_BLOCK_COUNT` |`16` |The number of blocks the display is divided into for dirty rendering.
`(sizeof(OLED_BLOCK_TYPE) * 8)`. | +|`OLED_BLOCK_SIZE` |`32` |The size of each block for dirty rendering
`(OLED_MATRIX_SIZE / OLED_BLOCK_COUNT)`. | +|`OLED_COM_PINS` |`COM_PINS_SEQ` |How the SSD1306 chip maps it's memory to display.
Options are `COM_PINS_SEQ`, `COM_PINS_ALT`, `COM_PINS_SEQ_LR`, & `COM_PINS_ALT_LR`. | |`OLED_SOURCE_MAP` |`{ 0, ... N }` |Precalculated source array to use for mapping source buffer to target OLED memory in 90 degree rendering. | |`OLED_TARGET_MAP` |`{ 24, ... N }`|Precalculated target array to use for mapping source buffer to target OLED memory in 90 degree rendering. | diff --git a/drivers/oled/oled_driver.c b/drivers/oled/oled_driver.c index 96ea58ccb2..643e528946 100644 --- a/drivers/oled/oled_driver.c +++ b/drivers/oled/oled_driver.c @@ -63,6 +63,10 @@ along with this program. If not, see . #define COM_SCAN_DEC 0xC8 #define DISPLAY_OFFSET 0xD3 #define COM_PINS 0xDA +#define COM_PINS_SEQ 0x02 +#define COM_PINS_ALT 0x12 +#define COM_PINS_SEQ_LR 0x22 +#define COM_PINS_ALT_LR 0x32 // Timing & Driving Commands #define DISPLAY_CLOCK 0xD5 @@ -182,7 +186,7 @@ bool oled_init(uint8_t rotation) { static const uint8_t PROGMEM display_setup2[] = { I2C_CMD, - COM_PINS, 0x02, + COM_PINS, OLED_COM_PINS, CONTRAST, 0x8F, PRE_CHARGE_PERIOD, 0xF1, VCOM_DETECT, 0x40, diff --git a/drivers/oled/oled_driver.h b/drivers/oled/oled_driver.h index ec07f1d9b8..abbdde57ed 100644 --- a/drivers/oled/oled_driver.h +++ b/drivers/oled/oled_driver.h @@ -24,17 +24,39 @@ along with this program. If not, see . // Expected user to implement the necessary defines #elif defined(OLED_DISPLAY_128X64) // Double height 128x64 +#ifndef OLED_DISPLAY_WIDTH #define OLED_DISPLAY_WIDTH 128 +#endif +#ifndef OLED_DISPLAY_HEIGHT #define OLED_DISPLAY_HEIGHT 64 +#endif +#ifndef OLED_MATRIX_SIZE #define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH) // 1024 (compile time mathed) - #define OLED_BLOCK_TYPE uint32_t +#endif +#ifndef OLED_BLOCK_TYPE + #define OLED_BLOCK_TYPE uint16_t +#endif +#ifndef OLED_BLOCK_COUNT #define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8) // 32 (compile time mathed) +#endif +#ifndef OLED_BLOCK_SIZE #define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT) // 32 (compile time mathed) +#endif +#ifndef OLED_COM_PINS + #define OLED_COM_PINS COM_PINS_ALT +#endif // For 90 degree rotation, we map our internal matrix to oled matrix using fixed arrays // The OLED writes to it's memory horizontally, starting top left, but our memory starts bottom left in this mode - #define OLED_SOURCE_MAP { 32, 40, 48, 56 } - #define OLED_TARGET_MAP { 24, 16, 8, 0 } +#ifndef OLED_SOURCE_MAP + #define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56 } +#endif +#ifndef OLED_TARGET_MAP + #define OLED_TARGET_MAP { 56, 48, 40, 32, 24, 16, 8, 0 } +#endif + // If OLED_BLOCK_TYPE is uint32_t, these tables would look like: + // #define OLED_SOURCE_MAP { 32, 40, 48, 56 } + // #define OLED_TARGET_MAP { 24, 16, 8, 0 } // If OLED_BLOCK_TYPE is uint16_t, these tables would look like: // #define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56 } // #define OLED_TARGET_MAP { 56, 48, 40, 32, 24, 16, 8, 0 } @@ -43,17 +65,36 @@ along with this program. If not, see . // #define OLED_TARGET_MAP { 56, 120, 48, 112, 40, 104, 32, 96, 24, 88, 16, 80, 8, 72, 0, 64 } #else // defined(OLED_DISPLAY_128X64) // Default 128x32 +#ifndef OLED_DISPLAY_WIDTH #define OLED_DISPLAY_WIDTH 128 +#endif +#ifndef OLED_DISPLAY_HEIGHT #define OLED_DISPLAY_HEIGHT 32 +#endif +#ifndef OLED_MATRIX_SIZE #define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH) // 512 (compile time mathed) +#endif +#ifndef OLED_BLOCK_TYPE #define OLED_BLOCK_TYPE uint16_t // Type to use for segmenting the oled display for smart rendering, use unsigned types only +#endif +#ifndef OLED_BLOCK_COUNT #define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8) // 16 (compile time mathed) +#endif +#ifndef OLED_BLOCK_SIZE #define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT) // 32 (compile time mathed) +#endif +#ifndef OLED_COM_PINS + #define OLED_COM_PINS COM_PINS_SEQ +#endif // For 90 degree rotation, we map our internal matrix to oled matrix using fixed arrays // The OLED writes to it's memory horizontally, starting top left, but our memory starts bottom left in this mode +#ifndef OLED_SOURCE_MAP #define OLED_SOURCE_MAP { 0, 8, 16, 24 } +#endif +#ifndef OLED_TARGET_MAP #define OLED_TARGET_MAP { 24, 16, 8, 0 } +#endif // If OLED_BLOCK_TYPE is uint8_t, these tables would look like: // #define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56 } // #define OLED_TARGET_MAP { 48, 32, 16, 0, 56, 40, 24, 8 } -- cgit 1.4.1 From bba5c09b23208f7c70b1062b695a5b3df492b329 Mon Sep 17 00:00:00 2001 From: Chris Scheib Date: Tue, 11 Jun 2019 17:42:53 -0400 Subject: [Docs] Update feature_rgb_matrix.md (#6117) * Update feature_rgb_matrix.md fix indentation on code comments * Update feature_rgb_matrix.md more formatting changes, missed these the first time --- docs/feature_rgb_matrix.md | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'docs') diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index 8f0cd12b3c..916fcdce03 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -42,11 +42,11 @@ Define these arrays listing all the LEDs in your `.c`: ```C const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations - * driver - * | R location - * | | G location - * | | | B location - * | | | | */ + * driver + * | R location + * | | G location + * | | | B location + * | | | | */ {0, C1_3, C2_3, C3_3}, .... } @@ -93,11 +93,11 @@ Define these arrays listing all the LEDs in your `.c`: ```C const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations - * driver - * | R location - * | | G location - * | | | B location - * | | | | */ + * driver + * | R location + * | | G location + * | | | B location + * | | | | */ {0, B_1, A_1, C_1}, .... } -- cgit 1.4.1 From e6a81133dd3d0d4076a08be76340f905fdbf7c7f Mon Sep 17 00:00:00 2001 From: "Michael F. Lamb" Date: Tue, 11 Jun 2019 15:27:17 -0700 Subject: Add SH1106 OLED support (#5787) * modify oled_driver to support SH1106 also: - improve mechanism to specify which OLED IC we use - comment calc_bounds() - give OLED_COLUMN_OFFSET a default value - inline comment re: OLED MEMORY_MODE and SH1106 - update docs/feature_oled_driver.h for SH1106 support and related changes - docs: OLED: note we have tested SSD1306 on ARM boards (per @XScorpion2) - define out MEMORY_MODE when using SH1106 OLED driver * document that SSD1306 128x64 on AVR works Per @XScorpion2: https://github.com/qmk/qmk_firmware/pull/5787#discussion_r291837842 --- docs/feature_oled_driver.md | 38 ++++++++++++++++++++++++++------------ drivers/oled/oled_driver.c | 31 ++++++++++++++++++++++++++++--- drivers/oled/oled_driver.h | 14 +++++++++++++- 3 files changed, 67 insertions(+), 16 deletions(-) (limited to 'docs') diff --git a/docs/feature_oled_driver.md b/docs/feature_oled_driver.md index 144b695b76..155dfa9d29 100644 --- a/docs/feature_oled_driver.md +++ b/docs/feature_oled_driver.md @@ -2,7 +2,17 @@ ## OLED Supported Hardware -128x32 OLED modules using SSD1306 driver IC over I2C. Supported on AVR based keyboards. Possible but untested hardware includes ARM based keyboards and other sized OLED modules using SSD1306 over I2C, such as 128x64. +OLED modules using SSD1306 or SH1106 driver ICs, communicating over I2C. +Tested combinations: + +| IC driver | Size | Keyboard Platform | Notes | +|-----------|--------|-------------------|--------------------------| +| SSD1306 | 128x32 | AVR | Primary support | +| SSD1306 | 128x64 | AVR | Verified working | +| SSD1306 | 128x32 | ARM | | +| SH1106 | 128x64 | AVR | No rotation or scrolling | + +Hardware configurations using ARM-based microcontrollers or different sizes of OLED modules may be compatible, but are untested. !> Warning: This OLED Driver currently uses the new i2c_master driver from split common code. If your split keyboard uses i2c to communication between sides this driver could cause an address conflict (serial is fine). Please contact your keyboard vendor and ask them to migrate to the latest split common code to fix this. @@ -86,17 +96,17 @@ void oled_task_user(void) { ## Basic Configuration -|Define |Default |Description | -|-----------------------|---------------|------------------------------------------------| -|`OLED_DISPLAY_ADDRESS` |`0x3C` |The i2c address of the OLED Display | -|`OLED_FONT_H` |`"glcdfont.c"` |The font code file to use for custom fonts | -|`OLED_FONT_START` |`0` |The starting characer index for custom fonts | -|`OLED_FONT_END` |`224` |The ending characer index for custom fonts | -|`OLED_FONT_WIDTH` |`6` |The font width | -|`OLED_FONT_HEIGHT` |`8` |The font height (untested) | -|`OLED_DISABLE_TIMEOUT` |*Not defined* |Disables the built in OLED timeout feature. Useful when implementing custom timeout rules.| - - +| Define | Default | Description | +|------------------------|-------------------|----------------------------------------------------------------------------------------------------------------------------| +| `OLED_DISPLAY_ADDRESS` | `0x3C` | The i2c address of the OLED Display | +| `OLED_FONT_H` | `"glcdfont.c"` | The font code file to use for custom fonts | +| `OLED_FONT_START` | `0` | The starting characer index for custom fonts | +| `OLED_FONT_END` | `224` | The ending characer index for custom fonts | +| `OLED_FONT_WIDTH` | `6` | The font width | +| `OLED_FONT_HEIGHT` | `8` | The font height (untested) | +| `OLED_DISABLE_TIMEOUT` | *Not defined* | Disables the built in OLED timeout feature. Useful when implementing custom timeout rules. | +| `OLED_IC` | `OLED_IC_SSD1306` | Set to `OLED_IC_SH1106` if you're using the SH1106 OLED controller. | +| `OLED_COLUMN_OFFSET` | `0` | (SH1106 only.) Shift output to the right this many pixels.
Useful for 128x64 displays centered on a 132x64 SH1106 IC. | ## 128x64 & Custom sized OLED Displays @@ -119,6 +129,8 @@ void oled_task_user(void) { ### 90 Degree Rotation - Technical Mumbo Jumbo +!> Rotation is unsupported on the SH1106. + ```C // OLED Rotation enum values are flags typedef enum { @@ -250,6 +262,8 @@ uint8_t oled_max_chars(void); uint8_t oled_max_lines(void); ``` +!> Scrolling and rotation are unsupported on the SH1106. + ## SSD1306.h driver conversion guide |Old API |Recommended New API | diff --git a/drivers/oled/oled_driver.c b/drivers/oled/oled_driver.c index 643e528946..a54f5fadc3 100644 --- a/drivers/oled/oled_driver.c +++ b/drivers/oled/oled_driver.c @@ -33,6 +33,8 @@ along with this program. If not, see . #endif // defined(__AVR__) // Used commands from spec sheet: https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf +// for SH1106: https://www.velleman.eu/downloads/29/infosheets/sh1106_datasheet.pdf + // Fundamental Commands #define CONTRAST 0x81 #define DISPLAY_ALL_ON 0xA5 @@ -40,6 +42,7 @@ along with this program. If not, see . #define NORMAL_DISPLAY 0xA6 #define DISPLAY_ON 0xAF #define DISPLAY_OFF 0xAE +#define NOP 0xE3 // Scrolling Commands #define ACTIVATE_SCROLL 0x2F @@ -53,6 +56,9 @@ along with this program. If not, see . #define MEMORY_MODE 0x20 #define COLUMN_ADDR 0x21 #define PAGE_ADDR 0x22 +#define PAM_SETCOLUMN_LSB 0x00 +#define PAM_SETCOLUMN_MSB 0x10 +#define PAM_PAGE_ADDR 0xB0 // 0xb0 -- 0xb7 // Hardware Configuration Commands #define DISPLAY_START_LINE 0x40 @@ -158,7 +164,11 @@ bool oled_init(uint8_t rotation) { DISPLAY_OFFSET, 0x00, DISPLAY_START_LINE | 0x00, CHARGE_PUMP, 0x14, - MEMORY_MODE, 0x00, }; // Horizontal addressing mode +#if (OLED_IC != OLED_IC_SH1106) + // MEMORY_MODE is unsupported on SH1106 (Page Addressing only) + MEMORY_MODE, 0x00, // Horizontal addressing mode +#endif + }; if (I2C_TRANSMIT_P(display_setup1) != I2C_STATUS_SUCCESS) { print("oled_init cmd set 1 failed\n"); return false; @@ -219,10 +229,25 @@ void oled_clear(void) { static void calc_bounds(uint8_t update_start, uint8_t* cmd_array) { - cmd_array[1] = OLED_BLOCK_SIZE * update_start % OLED_DISPLAY_WIDTH; - cmd_array[4] = OLED_BLOCK_SIZE * update_start / OLED_DISPLAY_WIDTH; + // Calculate commands to set memory addressing bounds. + uint8_t start_page = OLED_BLOCK_SIZE * update_start / OLED_DISPLAY_WIDTH; + uint8_t start_column = OLED_BLOCK_SIZE * update_start % OLED_DISPLAY_WIDTH; +#if (OLED_IC == OLED_IC_SH1106) + // Commands for Page Addressing Mode. Sets starting page and column; has no end bound. + // Column value must be split into high and low nybble and sent as two commands. + cmd_array[0] = PAM_PAGE_ADDR | start_page; + cmd_array[1] = PAM_SETCOLUMN_LSB | ((OLED_COLUMN_OFFSET + start_column) & 0x0f); + cmd_array[2] = PAM_SETCOLUMN_MSB | ((OLED_COLUMN_OFFSET + start_column) >> 4 & 0x0f); + cmd_array[3] = NOP; + cmd_array[4] = NOP; + cmd_array[5] = NOP; +#else + // Commands for use in Horizontal Addressing mode. + cmd_array[1] = start_column; + cmd_array[4] = start_page; cmd_array[2] = (OLED_BLOCK_SIZE + OLED_DISPLAY_WIDTH - 1) % OLED_DISPLAY_WIDTH + cmd_array[1]; cmd_array[5] = (OLED_BLOCK_SIZE + OLED_DISPLAY_WIDTH - 1) / OLED_DISPLAY_WIDTH - 1; +#endif } static void calc_bounds_90(uint8_t update_start, uint8_t* cmd_array) diff --git a/drivers/oled/oled_driver.h b/drivers/oled/oled_driver.h index abbdde57ed..03dda2e64a 100644 --- a/drivers/oled/oled_driver.h +++ b/drivers/oled/oled_driver.h @@ -19,6 +19,9 @@ along with this program. If not, see . #include #include +// an enumeration of the chips this driver supports +#define OLED_IC_SSD1306 0 +#define OLED_IC_SH1106 1 #if defined(OLED_DISPLAY_CUSTOM) // Expected user to implement the necessary defines @@ -100,7 +103,16 @@ along with this program. If not, see . // #define OLED_TARGET_MAP { 48, 32, 16, 0, 56, 40, 24, 8 } #endif // defined(OLED_DISPLAY_CUSTOM) -// Address to use for tthe i2d oled communication +#if !defined(OLED_IC) + #define OLED_IC OLED_IC_SSD1306 +#endif + +// the column address corresponding to the first column in the display hardware +#if !defined(OLED_COLUMN_OFFSET) + #define OLED_COLUMN_OFFSET 0 +#endif + +// Address to use for the i2c oled communication #if !defined(OLED_DISPLAY_ADDRESS) #define OLED_DISPLAY_ADDRESS 0x3C #endif -- cgit 1.4.1 From 6bdcbfb25ae068d9f5351af0f7c6a03385020661 Mon Sep 17 00:00:00 2001 From: fauxpark Date: Tue, 18 Jun 2019 12:37:17 +1000 Subject: Fix backlight breathing on C6 (#6102) * Fix backlight breathing on C6 * Account for ATmega32A's single TIMSK register (MT40) * Document hardware PWM on D4 for ATmega32A * Add C6 and D4 to BACKLIGHT_PIN description --- docs/config_options.md | 2 +- docs/feature_backlight.md | 15 ++++++++------- quantum/quantum.c | 48 ++++++++++++++++++++++++++++------------------- 3 files changed, 38 insertions(+), 27 deletions(-) (limited to 'docs') diff --git a/docs/config_options.md b/docs/config_options.md index f4035809a7..55d25d4c88 100644 --- a/docs/config_options.md +++ b/docs/config_options.md @@ -76,7 +76,7 @@ This is a C header file that is one of the first things included, and will persi * `#define B7_AUDIO` * enables audio on pin B7 (duophony is enables if one of B[5-7]\_AUDIO is enabled along with one of C[4-6]\_AUDIO) * `#define BACKLIGHT_PIN B7` - * pin of the backlight - B5, B6, B7 use PWM, others use softPWM + * pin of the backlight - `B5`, `B6`, `B7` and `C6` (and `D4` on ATmega32A) use hardware PWM, others use software implementation * `#define BACKLIGHT_LEVELS 3` * number of levels your backlight will have (maximum 15 excluding off) * `#define BACKLIGHT_BREATHING` diff --git a/docs/feature_backlight.md b/docs/feature_backlight.md index 048d75390d..5a21a67901 100644 --- a/docs/feature_backlight.md +++ b/docs/feature_backlight.md @@ -34,13 +34,14 @@ Hardware PWM is only supported on certain pins of the MCU, so if the backlightin Hardware PWM is supported according to the following table: -| Backlight Pin | Hardware timer | -|---------------|----------------| -|`B5` | Timer 1 | -|`B6` | Timer 1 | -|`B7` | Timer 1 | -|`C6` | Timer 3 | -| other | Software PWM | +| Backlight Pin | Hardware timer | +|---------------|-------------------------| +|`B5` | Timer 1 | +|`B6` | Timer 1 | +|`B7` | Timer 1 | +|`C6` | Timer 3 | +|`D4` | Timer 1 (ATmega32A only)| +| other | Software PWM | The [audio feature](feature_audio.md) also uses hardware timers. Please refer to the following table to know what hardware timer the software PWM will use depending on the audio configuration: diff --git a/quantum/quantum.c b/quantum/quantum.c index 23263b7007..36b7942d5d 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -1027,35 +1027,49 @@ void matrix_scan_quantum() { # define TCCRxB TCCR1B # define COMxx1 COM1C1 # define OCRxx OCR1C +# define TIMERx_OVF_vect TIMER1_OVF_vect +# define TOIEx TOIE1 # define ICRx ICR1 +# define TIMSKx TIMSK1 #elif BACKLIGHT_PIN == B6 # define HARDWARE_PWM # define TCCRxA TCCR1A # define TCCRxB TCCR1B # define COMxx1 COM1B1 # define OCRxx OCR1B +# define TIMERx_OVF_vect TIMER1_OVF_vect +# define TOIEx TOIE1 # define ICRx ICR1 +# define TIMSKx TIMSK1 #elif BACKLIGHT_PIN == B5 # define HARDWARE_PWM # define TCCRxA TCCR1A # define TCCRxB TCCR1B # define COMxx1 COM1A1 # define OCRxx OCR1A +# define TIMERx_OVF_vect TIMER1_OVF_vect +# define TOIEx TOIE1 # define ICRx ICR1 +# define TIMSKx TIMSK1 #elif BACKLIGHT_PIN == C6 # define HARDWARE_PWM # define TCCRxA TCCR3A # define TCCRxB TCCR3B -# define COMxx1 COM1A1 +# define COMxx1 COM3A1 # define OCRxx OCR3A +# define TIMERx_OVF_vect TIMER3_OVF_vect +# define TOIEx TOIE3 # define ICRx ICR3 +# define TIMSKx TIMSK3 #elif defined(__AVR_ATmega32A__) && BACKLIGHT_PIN == D4 # define TCCRxA TCCR1A # define TCCRxB TCCR1B # define COMxx1 COM1B1 # define OCRxx OCR1B +# define TIMERx_OVF_vect TIMER1_OVF_vect +# define TOIEx TOIE1 # define ICRx ICR1 -# define TIMSK1 TIMSK +# define TIMSKx TIMSK1 #else # if !defined(BACKLIGHT_CUSTOM_DRIVER) # if !defined(B5_AUDIO) && !defined(B6_AUDIO) && !defined(B7_AUDIO) @@ -1066,15 +1080,15 @@ void matrix_scan_quantum() { # define TCCRxA TCCR1A # define TCCRxB TCCR1B # define OCRxx OCR1A -# define OCRxAH OCR1AH -# define OCRxAL OCR1AL # define TIMERx_COMPA_vect TIMER1_COMPA_vect # define TIMERx_OVF_vect TIMER1_OVF_vect # define OCIExA OCIE1A # define TOIEx TOIE1 # define ICRx ICR1 -# ifndef TIMSK -# define TIMSK TIMSK1 +# if defined(__AVR_ATmega32A__) // This MCU has only one TIMSK register +# define TIMSKx TIMSK +# else +# define TIMSKx TIMSK1 # endif # elif !defined(C6_AUDIO) && !defined(C5_AUDIO) && !defined(C4_AUDIO) #pragma message "Using hardware timer 3 with software PWM" @@ -1084,16 +1098,12 @@ void matrix_scan_quantum() { # define TCCRxA TCCR3A # define TCCRxB TCCR3B # define OCRxx OCR3A -# define OCRxAH OCR3AH -# define OCRxAL OCR3AL # define TIMERx_COMPA_vect TIMER3_COMPA_vect # define TIMERx_OVF_vect TIMER3_OVF_vect # define OCIExA OCIE3A # define TOIEx TOIE3 # define ICRx ICR1 -# ifndef TIMSK -# define TIMSK TIMSK3 -# endif +# define TIMSKx TIMSK3 # else #pragma message "Audio in use - using pure software PWM" #define NO_HARDWARE_PWM @@ -1274,8 +1284,8 @@ void backlight_set(uint8_t level) { if (level == 0) { #ifdef BACKLIGHT_PWM_TIMER if (OCRxx) { - TIMSK &= ~(_BV(OCIExA)); - TIMSK &= ~(_BV(TOIEx)); + TIMSKx &= ~(_BV(OCIExA)); + TIMSKx &= ~(_BV(TOIEx)); FOR_EACH_LED( backlight_off(backlight_pin); ) @@ -1287,8 +1297,8 @@ void backlight_set(uint8_t level) { } else { #ifdef BACKLIGHT_PWM_TIMER if (!OCRxx) { - TIMSK |= _BV(OCIExA); - TIMSK |= _BV(TOIEx); + TIMSKx |= _BV(OCIExA); + TIMSKx |= _BV(TOIEx); } #else // Turn on PWM control of backlight pin @@ -1325,11 +1335,11 @@ bool is_breathing(void) { #else bool is_breathing(void) { - return !!(TIMSK1 & _BV(TOIE1)); + return !!(TIMSKx & _BV(TOIEx)); } -#define breathing_interrupt_enable() do {TIMSK1 |= _BV(TOIE1);} while (0) -#define breathing_interrupt_disable() do {TIMSK1 &= ~_BV(TOIE1);} while (0) +#define breathing_interrupt_enable() do {TIMSKx |= _BV(TOIEx);} while (0) +#define breathing_interrupt_disable() do {TIMSKx &= ~_BV(TOIEx);} while (0) #endif #define breathing_min() do {breathing_counter = 0;} while (0) @@ -1411,7 +1421,7 @@ void breathing_task(void) /* Assuming a 16MHz CPU clock and a timer that resets at 64k (ICR1), the following interrupt handler will run * about 244 times per second. */ -ISR(TIMER1_OVF_vect) +ISR(TIMERx_OVF_vect) #endif { uint16_t interval = (uint16_t) breathing_period * 244 / BREATHING_STEPS; -- cgit 1.4.1 From 810c8db7706f40f0436555fdffbaf849dc0a5641 Mon Sep 17 00:00:00 2001 From: Danny Date: Thu, 20 Jun 2019 01:02:20 -0400 Subject: Set default I2C clock speed to 100kHz for split_common (#6161) * Set default I2C clock rate for split_common boards to 100kHz Default from I2C driver is 400kHz. * Update documentation for setting I2C clock speed --- docs/config_options.md | 4 ++-- quantum/split_common/post_config.h | 4 ++++ 2 files changed, 6 insertions(+), 2 deletions(-) (limited to 'docs') diff --git a/docs/config_options.md b/docs/config_options.md index 55d25d4c88..7418e8dbf9 100644 --- a/docs/config_options.md +++ b/docs/config_options.md @@ -93,8 +93,8 @@ This is a C header file that is one of the first things included, and will persi * key combination that allows the use of magic commands (useful for debugging) * `#define USB_MAX_POWER_CONSUMPTION` * sets the maximum power (in mA) over USB for the device (default: 500) -* `#define SCL_CLOCK 100000L` - * sets the SCL_CLOCK speed for split keyboards. The default is `100000L` but some boards can be set to `400000L`. +* `#define F_SCL 100000L` + * sets the I2C clock rate speed for keyboards using I2C. The default is `400000L`, except for keyboards using `split_common`, where the default is `100000L`. ## Features That Can Be Disabled diff --git a/quantum/split_common/post_config.h b/quantum/split_common/post_config.h index 0e59df3d06..ff0fc5e193 100644 --- a/quantum/split_common/post_config.h +++ b/quantum/split_common/post_config.h @@ -4,6 +4,10 @@ #define RGBLIGHT_SPLIT #endif + #ifndef F_SCL + #define F_SCL 100000UL // SCL frequency + #endif + #else // use serial // When using serial, the user must define RGBLIGHT_SPLIT explicitly // in config.h as needed. -- cgit 1.4.1 From 317b8095647e208a7ac1ecf6b110051ca46553a8 Mon Sep 17 00:00:00 2001 From: fauxpark Date: Thu, 20 Jun 2019 15:33:39 +1000 Subject: Fix breathing always on for soft PWM (#5983) * Fix breathing always on for soft PWM * Remove reference to hardware PWM pins in BACKLIGHT_BREATHING description Now, breathing will only be unsupported when Timers 1 and 3 are both used by Audio * Document BACKLIGHT_ON_STATE and its purpose --- docs/config_options.md | 2 +- docs/feature_backlight.md | 10 ++++++++-- quantum/quantum.c | 17 ++++++++++------- 3 files changed, 19 insertions(+), 10 deletions(-) (limited to 'docs') diff --git a/docs/config_options.md b/docs/config_options.md index 7418e8dbf9..eb0a441ccc 100644 --- a/docs/config_options.md +++ b/docs/config_options.md @@ -80,7 +80,7 @@ This is a C header file that is one of the first things included, and will persi * `#define BACKLIGHT_LEVELS 3` * number of levels your backlight will have (maximum 15 excluding off) * `#define BACKLIGHT_BREATHING` - * enables backlight breathing (only works with backlight pins B5, B6 and B7) + * enables backlight breathing * `#define BREATHING_PERIOD 6` * the length of one backlight "breath" in seconds * `#define DEBOUNCE 5` diff --git a/docs/feature_backlight.md b/docs/feature_backlight.md index 5a21a67901..b06db89e4d 100644 --- a/docs/feature_backlight.md +++ b/docs/feature_backlight.md @@ -64,11 +64,17 @@ To change the behaviour of the backlighting, `#define` these in your `config.h`: |Define |Default |Description | |---------------------|-------------|-------------------------------------------------------------------------------------------------------------| |`BACKLIGHT_PIN` |`B7` |The pin that controls the LEDs. Unless you are designing your own keyboard, you shouldn't need to change this| -|`BACKLIGHT_PINS` |*Not defined*|experimental: see below for more information| +|`BACKLIGHT_PINS` |*Not defined*|experimental: see below for more information | |`BACKLIGHT_LEVELS` |`3` |The number of brightness levels (maximum 15 excluding off) | |`BACKLIGHT_CAPS_LOCK`|*Not defined*|Enable Caps Lock indicator using backlight (for keyboards without dedicated LED) | -|`BACKLIGHT_BREATHING`|*Not defined*|Enable backlight breathing, if supported | +|`BACKLIGHT_BREATHING`|*Not defined*|Enable backlight breathing, if supported | |`BREATHING_PERIOD` |`6` |The length of one backlight "breath" in seconds | +|`BACKLIGHT_ON_STATE` |`0` |The state of the backlight pin when the backlight is "on" - `1` for high, `0` for low | + +## Backlight On State + +Most backlight circuits are driven by an N-channel MOSFET or NPN transistor. This means that to turn the transistor *on* and light the LEDs, you must drive the backlight pin, connected to the gate or base, *low*. +Sometimes, however, a P-channel MOSFET, or a PNP transistor is used. In this case you must `#define BACKLIGHT_ON_STATE 1`, so that when the transistor is on, the pin is driven *high* instead. ## Multiple backlight pins diff --git a/quantum/quantum.c b/quantum/quantum.c index 36b7942d5d..6530738b71 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -707,8 +707,9 @@ bool process_record_quantum(keyrecord_t *record) { #if defined(BACKLIGHT_ENABLE) && defined(BACKLIGHT_BREATHING) case BL_BRTG: { - if (record->event.pressed) + if (record->event.pressed) { breathing_toggle(); + } return false; } #endif @@ -1148,13 +1149,13 @@ void backlight_off(uint8_t backlight_pin) { #define BACKLIGHT_PIN_INIT BACKLIGHT_PINS #endif -#define FOR_EACH_LED(x) \ +#define FOR_EACH_LED(x) \ for (uint8_t i = 0; i < BACKLIGHT_LED_COUNT; i++) \ - { \ - uint8_t backlight_pin = backlight_pins[i]; \ + { \ + uint8_t backlight_pin = backlight_pins[i]; \ { \ - x \ - } \ + x \ + } \ } static const uint8_t backlight_pins[BACKLIGHT_LED_COUNT] = BACKLIGHT_PIN_INIT; @@ -1233,7 +1234,9 @@ ISR(TIMERx_COMPA_vect) { // this one triggers at F_CPU/65536 =~ 244 Hz ISR(TIMERx_OVF_vect) { #ifdef BACKLIGHT_BREATHING - breathing_task(); + if(is_breathing()) { + breathing_task(); + } #endif // for very small values of OCRxx (or backlight level) // we can't guarantee this whole code won't execute -- cgit 1.4.1 From 1a442f9989c825cb42b41845658874f7f9e90ba7 Mon Sep 17 00:00:00 2001 From: lf Date: Mon, 24 Jun 2019 01:23:27 -0600 Subject: [Docs] Reword confusing description of `TO(layer)` (#6174) * Reword confusing description of `TO(layer)` * Update docs/keycodes.md Co-Authored-By: Drashna Jaelre --- docs/keycodes.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'docs') diff --git a/docs/keycodes.md b/docs/keycodes.md index 3ff87856e4..bd4dd61a5b 100644 --- a/docs/keycodes.md +++ b/docs/keycodes.md @@ -298,7 +298,7 @@ This is a reference only. Each group of keys links to the page documenting their |`LM(layer, mod)`|Momentarily turn on `layer` (like MO) with `mod` active as well. Where `mod` is a mods_bit. Mods can be viewed [here](https://docs.qmk.fm/#/feature_advanced_keycodes?id=mod-tap). Example Implementation: `LM(LAYER_1, MOD_LALT)`| |`LT(layer, kc)` |Turn on `layer` when held, `kc` when tapped | |`TG(layer)` |Toggle `layer` on or off | -|`TO(layer)` |Turn on `layer` when pressed | +|`TO(layer)` |Turns on `layer` and turns off all other layers, except the default layer | |`TT(layer)` |Normally acts like MO unless it's tapped multiple times, which toggles `layer` on | ## [Mouse Keys](feature_mouse_keys.md) -- cgit 1.4.1 From c1c0cf73ce0ed4301d7f3d7af0b352d9385da896 Mon Sep 17 00:00:00 2001 From: shela Date: Mon, 1 Jul 2019 15:32:59 +0900 Subject: fix typo --- docs/feature_advanced_keycodes.md | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'docs') diff --git a/docs/feature_advanced_keycodes.md b/docs/feature_advanced_keycodes.md index a6ddf458cc..f748ccd70c 100644 --- a/docs/feature_advanced_keycodes.md +++ b/docs/feature_advanced_keycodes.md @@ -256,10 +256,10 @@ If you press a Mod Tap key, tap another key (press and release) and then release For Instance: -- `SHFT_T(KC_A)` Down +- `SFT_T(KC_A)` Down - `KC_X` Down - `KC_X` Up -- `SHFT_T(KC_A)` Up +- `SFT_T(KC_A)` Up Normally, if you do all this within the `TAPPING_TERM` (default: 200ms) this will be registered as `ax` by the firmware and host system. With permissive hold enabled, this modifies how this is handled by considering the Mod Tap keys as a Mod if another key is tapped, and would registered as `X` (`SHIFT`+`x`). @@ -279,9 +279,9 @@ Setting `Ignore Mod Tap Interrupt` requires holding both keys for the `TAPPING_ For Instance: -- `SHFT_T(KC_A)` Down +- `SFT_T(KC_A)` Down - `KC_X` Down -- `SHFT_T(KC_A)` Up +- `SFT_T(KC_A)` Up - `KC_X` Up Normally, this would send `X` (`SHIFT`+`x`). With `Ignore Mod Tap Interrupt` enabled, holding both keys are required for the `TAPPING_TERM` to register the hold action. A quick tap will output `ax` in this case, while a hold on both will still output `X` (`SHIFT`+`x`). @@ -303,11 +303,11 @@ When the user holds a key after tap, this repeats the tapped key rather to hold Example: -- SHFT_T(KC_A) Down -- SHFT_T(KC_A) Up -- SHFT_T(KC_A) Down +- SFT_T(KC_A) Down +- SFT_T(KC_A) Up +- SFT_T(KC_A) Down - wait more than tapping term... -- SHFT_T(KC_A) Up +- SFT_T(KC_A) Up With default settings, `a` will be sent on the first release, then `a` will be sent on the second press allowing the computer to trigger its auto repeat function. -- cgit 1.4.1 From d16db6936715a98b6ae769463d5ccafab25b7203 Mon Sep 17 00:00:00 2001 From: XScorpion2 Date: Sat, 6 Jul 2019 23:00:05 -0500 Subject: Added mod carry over from press to release. (#5866) Update docs/feature_space_cadet.md Co-Authored-By: fauxpark --- docs/feature_space_cadet.md | 1 + quantum/process_keycode/process_space_cadet.c | 12 ++++++++++++ 2 files changed, 13 insertions(+) (limited to 'docs') diff --git a/docs/feature_space_cadet.md b/docs/feature_space_cadet.md index 075578522e..41a44627e3 100644 --- a/docs/feature_space_cadet.md +++ b/docs/feature_space_cadet.md @@ -43,6 +43,7 @@ By default Space Cadet assumes a US ANSI layout, but if your layout uses differe |`LAPO_KEYS` |`KC_LALT, KC_LSFT, KC_9` |Send `KC_LALT` when held, the mod `KC_LSFT` with the key `KC_9` when tapped. | |`RAPC_KEYS` |`KC_RALT, KC_RSFT, KC_0` |Send `KC_RALT` when held, the mod `KC_RSFT` with the key `KC_0` when tapped. | |`SFTENT_KEYS` |`KC_RSFT, KC_TRNS, SFTENT_KEY` |Send `KC_RSFT` when held, no mod with the key `SFTENT_KEY` when tapped. | +|`SPACE_CADET_MODIFIER_CARRYOVER` |*Not defined* |Store current modifiers before the hold mod is pressed and use them with the tap mod and keycode. Useful for when you frequently release a modifier before triggering Space Cadet. | ## Obsolete Configuration diff --git a/quantum/process_keycode/process_space_cadet.c b/quantum/process_keycode/process_space_cadet.c index 089199eee2..c8721d446c 100644 --- a/quantum/process_keycode/process_space_cadet.c +++ b/quantum/process_keycode/process_space_cadet.c @@ -81,11 +81,17 @@ static uint8_t sc_last = 0; static uint16_t sc_timer = 0; +#ifdef SPACE_CADET_MODIFIER_CARRYOVER +static uint8_t sc_mods = 0; +#endif void perform_space_cadet(keyrecord_t *record, uint8_t holdMod, uint8_t tapMod, uint8_t keycode) { if (record->event.pressed) { sc_last = holdMod; sc_timer = timer_read (); +#ifdef SPACE_CADET_MODIFIER_CARRYOVER + sc_mods = get_mods(); +#endif if (IS_MOD(holdMod)) { register_mods(MOD_BIT(holdMod)); } @@ -100,7 +106,13 @@ void perform_space_cadet(keyrecord_t *record, uint8_t holdMod, uint8_t tapMod, u register_mods(MOD_BIT(tapMod)); } } +#ifdef SPACE_CADET_MODIFIER_CARRYOVER + set_weak_mods(sc_mods); +#endif tap_code(keycode); +#ifdef SPACE_CADET_MODIFIER_CARRYOVER + clear_weak_mods(); +#endif if (IS_MOD(tapMod)) { unregister_mods(MOD_BIT(tapMod)); } -- cgit 1.4.1 From 6e6d079dd21f766191f60db062fae8889623ded1 Mon Sep 17 00:00:00 2001 From: XScorpion2 Date: Mon, 8 Jul 2019 08:28:31 -0500 Subject: Updated OLED Docs with notes about screen timeout. (#6276) * Updated OLED Docs with notes about screen timeout. * Update docs/feature_oled_driver.md Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> --- docs/feature_oled_driver.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'docs') diff --git a/docs/feature_oled_driver.md b/docs/feature_oled_driver.md index 155dfa9d29..503e438288 100644 --- a/docs/feature_oled_driver.md +++ b/docs/feature_oled_driver.md @@ -14,7 +14,7 @@ Tested combinations: Hardware configurations using ARM-based microcontrollers or different sizes of OLED modules may be compatible, but are untested. -!> Warning: This OLED Driver currently uses the new i2c_master driver from split common code. If your split keyboard uses i2c to communication between sides this driver could cause an address conflict (serial is fine). Please contact your keyboard vendor and ask them to migrate to the latest split common code to fix this. +!> Warning: This OLED Driver currently uses the new i2c_master driver from split common code. If your split keyboard uses I2C to communicate between sides, this driver could cause an address conflict (serial is fine). Please contact your keyboard vendor and ask them to migrate to the latest split common code to fix this. In addition, the display timeout system to reduce OLED burn-in also uses split common to detect keypresses, so you will need to implement custom timeout logic for non-split common keyboards. ## Usage -- cgit 1.4.1 From ecf0612cc8ed9458e30f7feafe6b3f7bb6985788 Mon Sep 17 00:00:00 2001 From: fauxpark Date: Fri, 12 Jul 2019 04:33:55 +1000 Subject: [Docs] Clarify the rules.mk setup for Unicode (#6286) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit * Clarify the rules.mk setup for Unicode * code point Co-Authored-By: Konstantin Đorđević * Remove "your" Co-Authored-By: Konstantin Đorđević * Undo a line change Co-Authored-By: Konstantin Đorđević * dot the comma Co-Authored-By: Konstantin Đorđević * Update docs/feature_unicode.md Co-Authored-By: Konstantin Đorđević --- docs/feature_unicode.md | 68 ++++++++++++++++++++++++++++++++----------------- 1 file changed, 45 insertions(+), 23 deletions(-) (limited to 'docs') diff --git a/docs/feature_unicode.md b/docs/feature_unicode.md index 778cdc69cb..bd1f4fa5ae 100644 --- a/docs/feature_unicode.md +++ b/docs/feature_unicode.md @@ -1,28 +1,44 @@ # Unicode Support -There are three Unicode keymap definition methods available in QMK: +Unicode characters can be input straight from your keyboard! There are some limitations, however. -## `UNICODE_ENABLE` +QMK has three different methods for enabling Unicode input and defining keycodes: -Supports Unicode up to `0x7FFF`. This covers characters for most modern languages, as well as symbols, but it doesn't cover emoji. The keycode function is `UC(c)` in the keymap, where _c_ is the code point's number (preferably hexadecimal, up to 4 digits long). For example: `UC(0x45B)`, `UC(0x30C4)`. +## Basic Unicode -## `UNICODEMAP_ENABLE` +This method supports Unicode code points up to `0x7FFF`. This covers characters for most modern languages, as well as symbols, but it doesn't cover emoji. -Supports Unicode up to `0x10FFFF` (all possible code points). You need to maintain a separate mapping table `const uint32_t PROGMEM unicode_map[] = {...}` in your keymap file. The keycode function is `X(i)`, where _i_ is an array index into the mapping table. The table may contain at most 16384 entries. +Add the following to your `rules.mk`: -You may want to have an enum to make referencing easier. So, you could add something like this to your keymap file: +```make +UNICODE_ENABLE = yes +``` + +Then add `UC(c)` keycodes to your keymap, where _c_ is the code point (preferably in hexadecimal, up to 4 digits long). For example: `UC(0x45B)`, `UC(0x30C4)`. + +## Unicode Map + +This method supports all possible code points (up to `0x10FFFF`); however, you need to maintain a separate mapping table in your keymap file, which may contain at most 16384 entries. + +Add the following to your `rules.mk`: + +```make +UNICODEMAP_ENABLE = yes +``` + +Then add `X(i)` keycodes to your keymap, where _i_ is an array index into the mapping table: ```c enum unicode_names { - BANG, - IRONY, - SNEK, + BANG, + IRONY, + SNEK }; const uint32_t PROGMEM unicode_map[] = { - [BANG] = 0x203D, // ‽ - [IRONY] = 0x2E2E, // ⸮ - [SNEK] = 0x1F40D, // 🐍 + [BANG] = 0x203D, // ‽ + [IRONY] = 0x2E2E, // ⸮ + [SNEK] = 0x1F40D, // 🐍 }; ``` @@ -30,27 +46,33 @@ Then you can use `X(BANG)`, `X(SNEK)` etc. in your keymap. ### Lower and Upper Case -Characters often come in lower and upper case pairs, for example: å, Å. To make inputting these characters easier, you can use `XP(i, j)` in your keymap, where _i_ and _j_ are the mapping table indices of the lower and upper case character, respectively. If you're holding down Shift or have Caps Lock turned on when you press the key, the second (upper case) character will be inserted; otherwise, the first (lower case) version will appear. +Characters often come in lower and upper case pairs, such as å and Å. To make inputting these characters easier, you can use `XP(i, j)` in your keymap, where _i_ and _j_ are the mapping table indices of the lower and upper case character, respectively. If you're holding down Shift or have Caps Lock turned on when you press the key, the second (upper case) character will be inserted; otherwise, the first (lower case) version will appear. -This is most useful when creating a keymap for an international layout with special characters. Instead of having to put the lower and upper case versions of a character on separate keys, you can have them both on the same key by using `XP`. This blends Unicode keys in with regular alphas. +This is most useful when creating a keymap for an international layout with special characters. Instead of having to put the lower and upper case versions of a character on separate keys, you can have them both on the same key by using `XP()`. This helps blend Unicode keys in with regular alphas. Due to keycode size constraints, _i_ and _j_ can each only refer to one of the first 128 characters in your `unicode_map`. In other words, 0 ≤ _i_ ≤ 127 and 0 ≤ _j_ ≤ 127. This is enough for most use cases, but if you'd like to customize the index calculation, you can override the [`unicodemap_index()`](https://github.com/qmk/qmk_firmware/blob/71f640d47ee12c862c798e1f56392853c7b1c1a8/quantum/process_keycode/process_unicodemap.c#L40) function. This also allows you to, say, check Ctrl instead of Shift/Caps. -## `UCIS_ENABLE` +## UCIS + +This method also supports all possible code points. As with the Unicode Map method, you need to maintain a mapping table in your keymap file. However, there are no built-in keycodes for this feature — you have to create a custom keycode or function that invokes this functionality. -Supports Unicode up to `0x10FFFF` (all possible code points). As with `UNICODEMAP`, you need to maintain a mapping table in your keymap file. However, there are no built-in keycodes for this feature — you have to add a keycode or function that calls `qk_ucis_start()`. Once this function has been called, you can type the corresponding mnemonic for your character, then hit Space or Enter to complete it, or Esc to cancel. If the mnemonic matches an entry in your table, the typed text will automatically be erased and the corresponding Unicode character inserted. +Add the following to your `rules.mk`: + +```make +UCIS_ENABLE = yes +``` -For instance, you could define a table like this in your keymap file: +Then define a table like this in your keymap file: ```c const qk_ucis_symbol_t ucis_symbol_table[] = UCIS_TABLE( - UCIS_SYM("poop", 0x1F4A9), // 💩 - UCIS_SYM("rofl", 0x1F923), // 🤣 - UCIS_SYM("kiss", 0x1F619) // 😙 + UCIS_SYM("poop", 0x1F4A9), // 💩 + UCIS_SYM("rofl", 0x1F923), // 🤣 + UCIS_SYM("kiss", 0x1F619) // 😙 ); ``` -To use it, call `qk_ucis_start()`, then type "rofl" and hit Enter. QMK should erase the "rofl" text and insert the laughing emoji. +To use it, call `qk_ucis_start()`. Then, type the mnemonic for the character (such as "rofl"), and hit Space or Enter. QMK should erase the "rofl" text and insert the laughing emoji. ### Customization @@ -68,7 +90,7 @@ Unicode input in QMK works by inputting a sequence of characters to the OS, sort The following input modes are available: -* **`UC_OSX`**: macOS built-in Unicode hex input. Supports code points up to `0xFFFF` (`0x10FFFF` with `UNICODEMAP`). +* **`UC_OSX`**: macOS built-in Unicode hex input. Supports code points up to `0xFFFF` (`0x10FFFF` with Unicode Map). To enable, go to _System Preferences > Keyboard > Input Sources_, add _Unicode Hex Input_ to the list (it's under _Other_), then activate it from the input dropdown in the Menu Bar. By default, this mode uses the left Option key (`KC_LALT`) for Unicode input, but this can be changed by defining [`UNICODE_KEY_OSX`](#input-key-configuration) with another keycode. @@ -112,7 +134,7 @@ You can also switch the input mode by calling `set_unicode_input_mode(x)` in you ```c void eeconfig_init_user(void) { - set_unicode_input_mode(UC_LNX); + set_unicode_input_mode(UC_LNX); } ``` -- cgit 1.4.1 From 663ca6ba9db59e05f1ba057ad4c0e3ff3cb0cff1 Mon Sep 17 00:00:00 2001 From: Phil Schalm Date: Fri, 12 Jul 2019 05:42:21 -0700 Subject: Documentation: Newbs Flashing: Hightlight that sudo may be needed (#6300) * Hightlight that sudo may be needed Also added "dfu-programmer: no device present" in so that anyone searching for that particular error can hopefully find the page. * Use new style of indicating a warning * Indicate that the FAQ should be read instead of blindly using sudo --- docs/newbs_flashing.md | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'docs') diff --git a/docs/newbs_flashing.md b/docs/newbs_flashing.md index a985e5d2b2..fa0a5e2ba5 100644 --- a/docs/newbs_flashing.md +++ b/docs/newbs_flashing.md @@ -127,9 +127,7 @@ Once it does this, you'll want to reset the controller. It should then show out >>> dfu-programmer atmega32u4 reset ``` -If you have any issues with this, you may need to this: - - sudo make ::dfu +?> If you have any issues with this - such as `dfu-programmer: no device present` - please see the [Frequently Asked Build Questions](faq_build.md). #### DFU commands -- cgit 1.4.1